Enterprise Manager Console doesn' t show the correct data

Hi everyone,
we use a oracle 10gR1 rac with two nodes.
we use the oracle enterprise manager console but it does not work all parts of.
And the console is wrong with some parts of the data shows.
for example ;
in the home page, Performans Analysis section shows the date two months earlier. Why ?
(Period Start Time 25.Ara.2010 21:00:59 Period Duration (minutes) 60,02)
other example ;
in the performans tab, host section does not show any data.
why doesn't work this section?
what can i do?
oracle version = 10.1.0.5
OS platform = AIX node1 3 5 00C5116E4C00
thanks.

Hm... could be that your machine is low on RAM for java apps (yours and OEM Console). (You can check resource consumption via perfmon)

Similar Messages

News feed on my Facebook app doesn't show the correct time. Can the time be set?

News feed on my Facebook app doesn't show the correct time. Can the time be set?

Does your phone show the correct time?
If not, change the time on your phone, see if it helps.
If it does, then sign out, sign back in. If that fails, the delete and reinstall. If that fails, then contact Facebook, as they're the developers of the app and will have the proper documentation to help you further.

Calendar Third Sunday of February doesn't show the correct day in all years

Calendar Third Sunday of February doesn't show the correct day in all years?
The day of month repeats the same day as saturday.
Example: February 20 2010= Saturday. Sunday shows 20 and not 21.
February 19 2010= Saturday. Sunday shows 19 and not 20...
I'm in Brasil, where DST begins exactly on the third sunday of February (coincidence?)...But the problem persists even if I deactivate the hour fuse control !

Yes, it's a DST issue. I've had this problem before at both ends of DST.
You can submit feedback to Apple: http://www.apple.com/feedback/iphone.html.

Enterprise Management Console doesn't work!

Hi, there,
I meet a strange problem. I use JDeveloper to make jsp project. the database is oracle 9i. I install JDeveloper and database on the same machine. at first, everything is ok. but suddenly I found that I can't run Enterprise Manager Console. the icon in the start meun became unrecognize. if I run the command on the command line, it's refused. I don't know what's the reason. but what's more strange is that I can run jsp project and store and retrieve data from database. I really don't know the reason, besides, how can I change database structure and view data stored in the database without Enterprise Manager Console?
my project will be used on the next week, but I don't know if this problem will effect funcation!
does there anyone know the reason and how can I resolve it? besides, my OS is windows xp professional.
any hint will be great appreciated!!

You can view your all values from Jdeveloper only .
Go for connection Database and click on user than u can c database structure and all tables views ....
Hope it helps

Print preview and print doesn't show the correct out put result when i connnected with EPSON LX-300+II

I hava an html webpage with css & print css. The print preview and print doesn't give correct output there is alignment problem when i connected with EPSONLX-300+II. But iam connected with hp laserjet they show the correct output with firefox. Please fix the problem as soon.....

I have same problem as you, but later I know how to deal with it.
1. change your print default preferences to
print quality into (120x144 dpi, or other which suites you)
mine goes well to 120x144 dpi
2. Before print enter File->Page setup, set true to option shrink to page width
in order to fit your page into your desired paper
(firefox will resize your content to suit the paper you choose).
If you dont want this you can disable this option.
3. Still in Page Setup, if checkbox "Print background (color & images)" is unchecked then
white text will be printed black.
Set this checked if you want to print white text as it is color.
I hope it answers your question.
Steve
http://www.dailymobilegames.com

IPhone World Clock doesn't show the correct times

How do I get the iPhone to show the correct World Clock times. I have the time zone set to San Diego and the clock time is correct. When I set San Diego as one of the World Clock times it shows a time 7 hours behind. New York is 4 hours behind instead of 3 hours ahead, the same 7 hour bust.

emr1100 ,
Have you tried resetting the phone.? Hold down the sleep/wake button and the home button until it restarts. If that doesn't work, try a restore....please back up your data with a sync before you restore the phone. If that doesn't work take it back to the Apple stor and let them take a look at it. They will fix it or give you another phone. Another idea...call AT&T to see if sometining can be "reset" on their end. You never know ...that might work also.
will2b

Oracle Enterprise Management Console doesn't work

Hi, there,
I meet a strange problem. I use JDeveloper to make jsp project. the database is oracle 9i. I install JDeveloper and database on the same machine. at first, everything is ok. but suddenly I found that I can't run Enterprise Manager Console. the icon in the start meun became unrecognize. if I run the command on the command line, it's refused. I don't know what's the reason. but what's more strange is that I can run jsp project and store and retrieve data from database. I really don't know the reason, besides, how can I change database structure and view data stored in the database without Enterprise Manager Console?
my project will be used on the next week, but I don't know if this problem will effect funcation!
does there anyone know the reason and how can I resolve it? besides, my OS is windows xp professional.
any hint will be great appreciated!!

You can view your all values from Jdeveloper only .
Go for connection Database and click on user than u can c database structure and all tables views ....
Hope it helps

Airport utility doesn't show the correct information

Hi - I am trying to get Airport Utility to work on my iMac (3.4 GHz Intel core i7, OS 10.8.4) but it does not show the correct information about my network. On my iMac, the utility consistently shows my Airport extreme and three Airport express as "Device Not Found". Yet the data suggests that is not correct: 1) Airport Utility on my older Macbook Pro shows all that all the devices are running fine; 2) Airport Utility on my iPhone shows that all the devices are working; 3) all the airport devices are showing green lights; 4) the wifi internet on my iMac works fine through my Airport Extreme; and 5) my music utility, Airfoil, routinely connects to all my airport express devices without a problem.
The only problem then is the Airport Utility on my iMac. How do I fix it?

If you are using 6.3 airport utility you must use ipv6 local link connection..
http://support.apple.com/kb/TS4597

Maps doesn't show the correct position - Asha 311

Nokia asha 311 latest update
My maps don't show the correct position. Why?
Moderator's Note: The subject was amended as the post was moved to the correct board.

There is no in built GPS chip, so reliant solely upon network triangulation for location which may mean several km out.
Happy to have helped forum in a small way with a Support Ratio = 37.0

Mini Calendar does not show the correct date

Hi there ,
in iCal on the bottom left side of the window is the mini Calendar, when I switch between months in this mini Cal,it does not show the correct month anymore and even the button "Today" can not revert the day back ( for example we are now in September, when I open iCal it shows it correctly but after going to next or previous months using the triangles on this mini Cal, the problem comes up ! )

Maybe it wasn't receiving the correct info from your carrier. You're supposed to turn your phone off once in a while so the carrier can update stuff. I had originally heard that you should do it once a day but I never did that.

The percentage completed UI is not showing the correct data

Hi All,
I have received complaints from one of my larger customers that a very long form we have created is not showing the correct % completed at the bottom. They get to the penultimate page (the last page only have three text boxes on) and it state that only 41% of the form has been completed.
It looks to me like the UI is not updating as the questions are being completed. Rather it waits until you move to the next page.
This is what makes our form look rubbish - you are being told that you have only completed 41% of the form only to move on to the next page and bam, you only have three more boxes to complete.
Can somebody help me out here.
Thanks,
Bill

Hi Bill;
I can take a look at your form but you are right that only the pages are accounted for in the percentage and not the form fields so it can be far off from reality. If there is skip logic in a form that can make it vary more. It is likely that it is working "correctly" (considering how we calculate) in your form but if you send me the link to your form at [email protected] I can see if it is not.
Thanks,
Josh

BPM console doesn't shows the deployed application in BPM console

Hi Friends,
i developed a BPM process in Jdeveloper and deployed in the weblogic server. Enterprise manager shows that application but in BPM workspace doesn't shows that application to initiate the process form BPM console. any one can you please let me know why the weblogic server shows this peculiar behavior?
Thanks
Hari Mandadapu

Did you create an initiator task with corresponding Task Flow within the BPM Project?
Only when you add an initiator task it will show up in the BPM Workspace.
An initiator task differs from a regular human workflow task.
Otherwise you can only start the process from Enterprise Manager or Webservice Call. Check out if the process show up in Enterprise Manager.
Regards,
Martien

Solaris Management Console doesn't show user's groups

Hello friends:
I am using Solaris 10 under Sparc.
i am having some problem with Solaris Managemen Console
With users -> users accounts -> edit a user
when i click on Groups TAB i can read:
The groups can not be listed. You can ....
It has been running, but sice 1 day ago it doesn't...
We don't use NIS or LDAP, only files.
/etc/nsswitch.conf is nsswitch.dns
groups command runs ok
cd /etc
ruben@laika:/etc$ ls -l nsswitch.*
-rw-r--r-- 1 root sys 1120 Apr 8 13:08 nsswitch.conf
-rw-r--r-- 1 root sys 1120 Jan 21 23:29 nsswitch.dns
-rw-r--r-- 1 root sys 757 Jan 21 23:28 nsswitch.files
-rw-r--r-- 1 root sys 1248 Jan 21 23:29 nsswitch.ldap
-rw-r--r-- 1 root sys 1228 Jan 21 23:28 nsswitch.nis
-rw-r--r-- 1 root sys 1558 Jan 21 23:29 nsswitch.nisplus
ruben@laika:/etc$ groups ruben
users
ruben@laika:/etc$
Where could be the problem?
How could i reinit solaris management console server.
Solaris has been restarted a lot of times without result :(
Thank's

i have reinstalled solaris and the problem continues.
Under Solaris Management Console groups and users doesn't run ok. Editing an user i can't see groups and editing groups i can't see its users...very very extrange.
A bug?
I don't know what is happening :(

Clocks feature doesn't show the correct time

It's 11:30 pm here in Tokyo. I have clocks set for Boston and San Francisco, but they are showing the time off by an hour.
It's 10:30 am in Boston, right? But the clock says 9:30 am.
I have DST turned off because Japan doesn't have DST. I tried it with DST turned on also, but that didn't help. If I have the correct time set here, the wrong time shows in the U.S.
It's a world clock, but I think the algorithm is broken.
doug

Doug,
This is genuinely comical. I had time to kill so I called back tonight with my case number. A lovely lady answered and confirmed that "William" had walked through all the steps. She was going to get a "product specialist" from Cupertino.
It took five minutes but soon she was instant messaging to this product specialist, presumably in Cupertino, which is a mere 5 miles from me.
His first suggestion was to do nothing - In October California would come off DST, then I could change my Nano G3 and everything would be right. I asked my friend to tell the "specialist" that his first suggestion was unacceptable. I can't believe Apple is selling a product that is purposely WRONG six months a year.
His second suggestion was to take the Nano out of DST mode. Once again I asked my Bangalore friend to tell the Cupertino specialist all that did was make Singapore time correct and California time wrong. Also unacceptable.
Finally he offered that this might be a known bug, might be getting corrected as we speak, and that maybe a software update will be available soon.
I'm guessing this guy is a politician???
Anyway, the bottom line is there's nothing 800-APL-CARE can do or will do. Our only option is to wait for the software update that might come and might fix the problem.
Sorry, I don't know what else to try ...

Finder Cover Flow is broken and doesn't show the correct file I click on

When I go into my Downloads and press the spacebar to preview a photo, it will preview the photo before it for some weird reason.
Example:
I highlight and press space for "Photo 2", but instead it will show "Photo 1" in the Cover Flow and will Preview that instead.

Totally broken for me too. This is a giant, gaping hole in the OS LOL. I fire up a Finder window w/ cover flow view, erase a file, and now the highlighted image in the list below is off by one file and it doesn't remove the preview of the just-deleted file in the Cover Flow pane. Sad. This is just an embarrassing bug Big A. How do you not fix this before going public with a major point release? Not to mention the scrolling issue.

Enterprise Manager Console doesn' t show the correct data

Similar Messages

Maybe you are looking for