Enterprise Manager Grid Control - SSH not working on Windows

Hi,
We tried the below steps to install EM Grid control on our Windows servers.
• Oracle Application Grid Control with Oracle Management Agent has been installed successfully on Server1.
• As part of prerequisites for Agent installation using Agent Deployment Wizard, we have installed Cygwin in both the boxes – SOA box (Server2) and Grid control box (Server1) for SSH communication. However, the agent installation failed and the service in SOA box failed to start. We tried re-installation of Cygwin but unable to bring up Cygwin service.
• We have installed SOA suite in another box (Server3) and then installed Cygwin. Cygwin installation was successful and all previous issues were resolved.
However, SSH communication is getting failed because of the error "User Authentication failed on remote nodes:Server3. Either the provided username and password is incorrect or Password Authentication is disabled for the sshd daemon on the remote nodes. To enable Password Authentication set the property PasswordAuthentication to "yes" in the SSHD Configuration File (sshd_config) on the remote nodes".
We are able to achieve SSH communication when we manually try it through Cygwin Bash Shell.
Any pointers in resolving this would be highly appreciated.
regards,
Satyajith
Edited by: 817555 on Dec 12, 2010 10:11 PM

I couldn't get to work either so I left the ssh configuration out and went on with 'silent' installation which worked like a charm and oem discovered it right away. Be sure change the parameters according to your environment in 'additional_agent.rsp' file and use that to run the silent installation. You may have to add one additional parameter manually about agent home location, look in the documentation for the exact parameter name. Hope this helps, Viral.

Similar Messages

Oracle Enterprise Manager Database Control is not working properly

Hello!
I have a problem with Oracle Enterprise Manager Database Control, the web console. When I open the browser, instead of showing the login window, it shows the window where three arrows, the database instance, the listener, and the conection, that are red and down.
However they are working correctly, the database is up and working, but the EM doesn't show anything else.
Is there a way to make it work again?
Thanks!

The Enterprise Manager has lost sync with the database.
The only way I know to do this remotely is to tell the OEM to shut down and/or bring up the database - twice. It'll try and fail and perhaps eventually reset it's pointers.
I'd really like Oracle to create a 're-sync to actual state' URL ... there must be an easy way, such as flushing the collected metrics or something.

Install Enterprise Manager Grid Control 11R1 Failed at OMS Configuration

Hello:
I have installed Oracle 11g (11.2.0.1) and WebLogic Server (WLS) 10.3.6.0 and currently I am in the process of installing Enterprise Manager Grid Control 11R1 on a Linux RedHat 5.8 and it fails at OMS Configuration.
I have read the following thread and they suggested to use WLS 10.3.2:
Trouble installing EM GC -- installer patch 9329357 fails
I was looking for WLS 10.3.2 in Oracle's website and I could not find it.
Any help would be greatly appreciated.
Here is the log regarding the error:
The patch has more than one Archive Action but there is no Make Action.
ApplySession applying interim patch '9367763' to OH '/dbs0/product/fmw/oms11g'
Running prerequisite checks...
You selected -local option, hence OPatch will patch the local system only.
Please shutdown Oracle instances running out of this ORACLE_HOME on the local system.
(Oracle Home = '/dbs0/product/fmw/oms11g')
Is the local system ready for patching? y
Y (auto-answered by -silent)
User Responded with: Y
Backing up files and inventory (not for auto-rollback) for the Oracle Home
Backing up files affected by the patch '9367763' for restore. This might take a while...
Backing up files affected by the patch '9367763' for rollback. This might take a while...
Patching component oracle.ldap.rsf, 11.1.1.2.0...
Updating archive file "/dbs0/product/fmw/oms11g/lib/libldapclnt11.a" with "lib/libldapclnt11.a/gslu.o"
ApplySession adding interim patch '9367763' to inventory
Verifying the update...
Inventory check OK: Patch ID 9367763 is registered in Oracle Home inventory with proper meta-data.
Files check OK: Files from Patch ID 9367763 are present in Oracle Home.
Execution of 'sh /dbs0/product/fmw/oms11g/install/oneoffs/111010/9367763/custom/scripts/post -apply 9367763 ':
Return Code = 0
The local system has been patched and can be restarted.
OPatch succeeded.
This config tool has failed. Please re-run this config tool manually from another terminal as
<ORACLE_HOME>/perl/bin/perl <ORACLE_HOME>/install/oneoffs/apply_NewOneoffs.pl <ORACLE_HOME> <oneoff_numbers>
Eg: /scratch/EM/agent10g/perl/bin/perl /scratch/EM/agent10g/install/oneoffs/apply_NewOneoffs.pl /scratch/EM/agent10g 5632264,5961654
Finished one-offs apply...
Deleting the files...
Finished deleting the above files...
Configuration assistant "OMS Oneoff Patch Application" Succeeded
Running Configuration assistant "Repository Configuration"
Calling the EMSCHEMA MANAGER: CREATE
Please check the Repository Configuration Assistant logs at: /dbs0/product/fmw/oms11g/sysman/log/schemamanager
The create is completed now running the MOS
Configuration assistant "Repository Configuration" Succeeded
Running Configuration assistant "MDS Schema Configuration"
Configuration assistant "MDS Schema Configuration" Succeeded
Running Configuration assistant "OCM EM Repository Instrumentation"
Configuration assistant "OCM EM Repository Instrumentation" Succeeded
Running Configuration assistant "OMS Configuration"
Executing the OMSCA command...
Check the OMS Configuration Assistant logs at: /dbs0/product/fmw/oms11g/cfgtoollogs/omsca
INFO: Required tool's Execution failed
Configuration assistant "OMS Configuration" Failed
INFO: ***Configuration Assistants Action END ***
*** The installation was Successful, but some configuration assistants were failed or cancelled or skipped. ***

Hello:
For some reason after selecting the Retry button it successfully passed the Add-on OMS Side Configuration. Now I am failing at the "Agent Configuration Assistant". Here's the agent log:
log4j:ERROR No appenders could be found for category (oracle.sysman.emas.sdk.discovery.discover.WeblogicTargetDiscovery).
log4j:ERROR Please initialize the log4j system properly.
Total Discovery time is :1675milliseconds.
INFO: oracle.sysman.top.agent:AddingToTargetsXml: WLS targets
INFO: oracle.sysman.top.agent:Adding /oracle/product/agent11g/sysman/install//oraclewls.out file to /oracle/product/agent11g
INFO: oracle.sysman.top.agent:addToTargetsXML:TargetInstaller added target file= /oracle/product/agent11g/sysman/install//oraclewls.out to /oracle/product/agent11g successfully.
INFO: oracle.sysman.top.agent:AgentPlugIn:perform:Starting Agent with startAgent=true
INFO: oracle.sysman.top.agent:Starting the agent
INFO: oracle.sysman.top.agent:Starting the agent...
INFO: oracle.sysman.top.agent:Executing Command: /oracle/product/agent11g/bin/emctl start agent
INFO: oracle.sysman.top.agent:Oracle Enterprise Manager 11g Release 1 Grid Control 11.1.0.1.0
INFO: oracle.sysman.top.agent:Copyright (c) 1996, 2010 Oracle Corporation. Allrights reserved.
INFO: oracle.sysman.top.agent:Agent is already running
INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 0
INFO: oracle.sysman.top.agent:
The Management Agent Configuration Assistant has failed. The following failureswere recorded:
Securing of the agent failed.
INFO: oracle.sysman.top.agent:Internal PlugIn for {Micro Step state:step:2:configuration in CfmAggregateInstance: oracle.sysman.top.agent:11.1.0.1.0:common:family=CFM:oh=/oracle/product/agent11g:label=10} failed with an unhandled exception:
java.lang.Exception:
The Management Agent Configuration Assistant has failed. The following failureswere recorded:
Securing of the agent failed.
at oracle.sysman.emcp.agent.AgentPlugIn.startProcessing(AgentPlugIn.java:269)
at oracle.sysman.emcp.agent.AgentPlugIn.invoke(AgentPlugIn.java:243)
at oracle.sysman.emCfg.core.PerformMicroStep.runJavaClass(PerformMicroStep.java:540)
at oracle.sysman.emCfg.core.PerformMicroStep.executeMicroStep(PerformMicroStep.java:120)
at oracle.sysman.emCfg.core.ActionPerformer.performMicroStep(ActionPerformer.java:917)
at oracle.sysman.emCfg.core.ActionPerformer$Performer.run(ActionPerformer.java:1038)
INFO: oracle.sysman.top.agent:The plug-in Agent Configuration Assistant has failed its perform method
Any help would be greatly appreciated.
Thanks,
Orivares

ASM without Enterprise Manager Grid Control

Dear Gurus,
Can ASM be configured on Oracle 11g R2 without Enterprise Manager Grid Control ?
If so, how?
/Regards

Thanks Jose,
But it seems asmca is not on my server were I installed Oracle 11g R2. With your input I have been able to search in the right direction though. The following page seems to say that the Oracle grid infrastructure must be installed, as asmca is part of it:
http://download.oracle.com/docs/cd/E11882_01/install.112/e10840/oraclerestart.htm#BABGDFIC
It states this:
If you do not have Automatic Storage Management installed and you want to use Automatic Storage Management as your storage option, then you must complete an Oracle grid infrastructure installation before you start your Oracle Database installation.
To me this seems like overkill (having to install 3GB extra software to test if ASM is what we need, where in Oracle 10g no grid infrastructure was needed).
/Best regards
/9350831
Edited by: user9350831 on 24-jun-2010 21:41

11.1.0.1.0 Enterprise Manager Grid Control - Single Sign-on certification

Greetings all,
What are the single sign-on solutions that work with 11.1.0.1.0 enterprise manager grid control?
thanks
Seetharaman

That shouldn't happen normally. Check again the installation guide that you meet all requirements for the repository database. Make sure there's no 'old' SYSMAN user (from standalone database control etc.).
Werner

Enterprise manager Grid Control for Windows 64 bit

Hi,
I am looking for Enterprise Manager Grid Control 10.2.0.3 for Microsoft Windows Server 2003 R2 64 bit. On OTN and metalink I can only find for 32 bit. Can anyone suggest where I can find the same.
Thanks in Advance.
SK.

The OMS is on Win x86 and supports Agent on Win x64 target.

Apply CPU /PSU patches through Enterprise Manager Grid Control.

How to apply PSU patches from 10.2.0.5 GRID Grid Control to my test/development/qa environment.
Are there any step by step documents availible. Did any one applied these patches using Oracle Enterprise Manager Grid control.

Please read
Oracle® Enterprise Manager Administrator's Guide for Software and Server Provisioning and Patching
10g Release 5 (10.2.0.5.0)
3 Infrastructure Requirements
http://download.oracle.com/docs/cd/B16240_01/doc/em.102/e14500/infrastructure_setup.htm#BABEIFBC
For the correct setup to do you patching.
Regards
Rob
http://oemgc.wordpress.com

Please provide the patch set for Oracle Enterprise Manager Grid Control 10

Hi,
please provide the patch set for Oracle Enterprise Manager Grid Control 10.2.0.1 and 10.2.0.5 for AIX 5.3
patch set for Oracle Enterprise Manager Grid Control for 11.2.0.2 OS AIX 5.3
Thanks,
Vishal Hande.

user12009184 wrote:
Hi,
please provide the patch set for Oracle Enterprise Manager Grid Control 10.2.0.1 and 10.2.0.5 for AIX 5.3
patch set for Oracle Enterprise Manager Grid Control for 11.2.0.2 OS AIX 5.3
Thanks,
Vishal Hande.you must obtain all patches directly from
http://support.oracle.com

Install Enterprise Manager Grid Control 10.2.0

Hi,
to install Oracle Enterprise Manager Grid Control 10.2.0. should I
1-install 10g Release 1 (10.1)
2-Apply patch nnnn (Which number ) ?
Is it possible to install Enterprise Manager Grid Control 10.2.0. from scratch ? Where can I download the ressource ?
Thank you.

You can check this:
[http://www.oracle.com/technology/software/products/oem/htdocs/gridR3_10203_readme.html]
steps are outlined here:
[http://www.oracle-base.com/articles/10g/Oracle10gR2GridControlInstallationOnRedHatAndCentOS.php]
Edited by: Anantha on Apr 14, 2009 11:23 AM

Can Enterprise Manager Grid Control 10g R4 manages Oracle DB 11g?

Are there some articles or documents for that?

I assume you are asking whether it is possible to run Enterprise Manager Grid Control without using the embedded database. The answer is yes. There is a step in the install wizard that ask you whether you want to create an embedded database, or use an existing database environment. Just follow the instructions on the wizard to point your EM server to the database of your choice. You can even run EM on RAC provided that you already have the license for it.

Entreprise manager versus enterprise manager grid control

Hello,
This may seem a dummy question, but wath is the difference between Enterprise Manager and Enterprise manager grid control?
Thanks

And the anwser is:
Check document OEM Concepts page 12-1.
Thanks
Gonçalo Ribeiro

ActiveX control is not working with windows NT

I've have a stand alone application which uses an activeX control. The application was compiled using Labview 7.1 on a Windows XP machine. The application will run without any problems on Windows XP and Windows 2000, however the activeX control will not work with Windows NT 4.0. The activeX control is registered, and I have also compiled the application on a Windows NT 4.0 machine. I do not receive any error messages, the application will start but will not communicate with the activeX control. Does anyone have any suggestions?

Hello,
Have you tired running the VI by itself (not exe) on the NT machine? Make sure you are doing adequate error checking in your code. It could be possible that the application is generating an error which in not handled appropriately. Also which service pack do you have installed on the NT machine? Please look at the release notes for LabVIEW 7.1 here.
Regards,
Chetan K
Application Engineer

H8-1287 Beats Audio controls do not work in Windows 8.1

I've upgraded to Windows 8.1 and installed the IDT High-Definition audio driver from HP's website. The surround sounds seems to be working but the controls do not work to modify the EQ etc. I've seen the problem has been resolved for Envy laptops but all the links for the software appear to only be for the notebooks and not compatible with my desktop system. I've downloaded the available software (IDT High-Definition Audio driver) found under my HPE HI-1287 product from HP's support site but the Beats audio control panel doesn't seem to make any sound quality changes. Hopefully there is a driver somewhere compatible with my desktop system that allows controling the audio properly. Thanks.

Hello @KICR,
I understand that the Beats Audio Console is not adjusting the audio settings on your HP Pavilion HPE h8-1287c Desktop PC running Windows 8.1. According to the HP Pavilion HPE h8-1287c Desktop PC Drivers page there are no Windows 8.1 drivers for your computer. I can only assume that this means your computer is currently using Windows default drivers or Windows 8 drivers and the Beats Audio Console is not able to interact properly with the currently installed driver.
All I can recommend is that you check back periodically to the drivers page I linked above and see if Windows 8.1 drivers have been created. Other than that your only option at this time would be to use the HP Support document: Using Microsoft System Restore (Windows 8) to restore your computer back to Windows 8 where the Beats Audio Console has drivers that are compatible.
I hope this helps. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Brightness and volume control keys not working with windows 7?

brightness, volume control and some other keys keys are not working with windows 7 with macbook pro retina. Can I fix it?

Welcome to the Apple Support Communities
Have you installed Boot Camp drivers? You need them to make your computer work properly on Windows, and to use your function keys as Play or Pause, volume and brightness keys.
To install them, follow these steps:
1. Press the X key while your Mac is starting to start into OS X.
2. Open Boot Camp Assistant and tick only the option to download Windows support software.
3. Windows support software will be downloaded and Boot Camp Assistant will ask you to burn it into a DVD or USB drive, so do it.
4. Start into Windows, insert the DVD or USB drive and install Boot Camp drivers. Your Mac and your volume and brightness keys will be working after installing the drivers

Enterprise manager grid control not working

We are using EBS 12.0.6 and database 10.2.0.2
enterprise manager doesnt work
What can be the reason..does it need seperate licensing?
Is there anything like admin console in 10g ?

this note applies to 12 to 12.0.3
i am on 12.0.6It should work with 12.0.6
Does it need a seperate license? somebody told me this
can you confirm me?Contact your Oracle Sales representative for license issues.
You may also review:
Oracle Enterprise Manager Licensing Information
http://download.oracle.com/docs/cd/B19306_01/license.102/b40010.pdf
Oracle Enterprise Manager Licensing Information
http://download.oracle.com/docs/cd/B16240_01/doc/license.102/b40010.pdf

Enterprise Manager Grid Control - SSH not working on Windows

Similar Messages

Maybe you are looking for