Enterprise manager in oracle 9i

hi
If i could not installed Oracle enterprise manager in a remote server , how could i install for the server ?This is about oracle 9i.
I have remote access only via VPN. and how can we check whether already enterprise manager installed or not ?
Thanks
Luke

You must read the part in the Installation Documentation for certified repository databases to ensure that your database is OK.
My advice is always, never start any installation (not only Oracle) without reading the Documentation, Release Note and any README.
You will spend less time in the installation as Configuration if you use the required documentations for your platform.
http://www.oracle.com/pls/db102/portal.portal_db?selected=21

Similar Messages

Enterprise Manager for Oracle 8.1.5 Win NT 4.0

Anyone know where can I download the Enterprise Manager for Oracle 8.1.5 running Windows NT 4.0?
The one in the Oralce download is for 8.1.6?
Thanks
Eng Wah

Depends on how big is your database.
For small database, doing a export and import is quick and dirty.
For larger database, I would suggest migrate the database. But this means a lot of work and test. This is what I would do if I am doing amigration:
1. Do a cold backup of your 815 database
2. On your new test box, try to install 815 and start your old database
3. Upgrade your database to 8174
4. Install 10gr2 on your new test box
5. Migrate your 8174 database to 10gr2.
6 Test a lot
7. Repeat steps 1-6 2-3 times
8. Document tthe process and your test results completely.
9. Repeat what you document on your production box.

Stopping the Enterprise Manager Console (Oracle 10g on SuSE 9.1)

I'm trying to stop the Enterprise Manager Console by issuing the command:
${ORACLE_HOME}/bin/emctl stop dbconsole
Unfortunately, the command fails to stop the EM Console. Here's the output I get:
TZ set to US/Pacific
Oracle Enterprise Manager 10g Database Control Release 10.1.0.2.0
Copyright (c) 1996, 2004 Oracle Corporation. All rights reserved.
http://<hostname>:5505/em/console/aboutApplication
Stopping Oracle Enterprise Manager 10g Database Control ...
--- Failed to shutdown DBConsole Gracefully ---
failed.
The only way I can stop the EM Console (and related services--i.e., emagent) is to kill its process.
Everything (Listener, DB Instance, EM Console) starts fine. I can stop the Listener and DB Instance without any problems. It's just the EM Console shutdown that doesn't happen cleanly.
Has anyone else encountered the same condition? If so, what was the solution?
Here's my operating environment:
SuSE 9.1 (Kernel 2.6.5-7.108-default)
Oracle 10g
Thanks in advance for any help/insight.

Has anyone else encountered the same condition? If so, what was the solution?Yes. Shutdown/reboot of the system made the error go away.
Sorry, no better clues,
Toni

Unable to access Oracle Enterprise Manager in Oracle 10g AS Machine

Hi All,
We are working on oracle forms 10g in 3 tier architecture. I have installed oracle 10g Infrastructure (OraHome_1) followed by oracle 10g Application server (middle-tier,OraHome_2). I have copied all the forms to OraHome_2\forms folder and compiled them successfully.
When i tried to access enterprise manager (Infrastructure)thru http://myappserver:18100, i was unable to do so. It displayed "page cannot be displayed".
Also
When i tried to access enterprise manager (middle-tier)thru http://172.16.1.1:18101, i was unable to do so. It displayed "page cannot be displayed".
I checked for port status, thru “netstat –na” command, It was displaying
172.16.1.1 18100 TIME_WAIT
172.16.1.1 18101 TIME_WAIT
172.16.1.1 7777 TIME_WAIT
Why is that i am unable to access the Enterprise Manager?

Hi All,
I was able to resolve the issue. Thr was a proxy server enabled in the IE in AS machine. Once i checked the option for bypassing it and turned off the windows firewall(OS was win 2003 server). I was able to view the home page at http://myappserver, then was able to access EM also.

Installation of Enterprise Manager for oracle 10g

Hello.
have a database created on oracle 10.2.0.1.0, but I don't have installed the enterprise manager.
I need to install the enterprise manager to manage the database.
Anyone knows any procedure or any link to see some examples of installation.
Thank you for your help

A couple of quick points:
1. 10.2.0.1 is many years old an in desupport mode. Currently supported versions are 11.1.0.6 and above.
2. Enterprise Manager is not required to do anything and many of us prefer to not use it.
That said ... did you read the installation docs? Which ones? Please provide the link and explain what in the doc is not clear.

Where is the Enterprise Manager in Oracle 8.1.5

Hi,
After installing Oracle 8i (8.1.5), I can't find the
Oracle Enterprise Manager. Where is it? In Oracle 8.0.5 on
NT, you can access it from the START button. In the Oracle 8.1.5
documentation, it talks about the Microsoft Management Console
where you can access the Database Administration Assistant.
When I select the database administration assistant menu
from the Start button menu, nothing happens. Do I need to
have Oracle 8.1.5 installed on an NT Server?
TIA,
Phil
null

Hi, beeftastic-
There are two color pickers - one is for solids and the other is for gradients. Here's a screenshot of the properties panel with the gradient picker icon highlighted.
Hope that helps!
-Elaine

Unable to launch Enterprise Manager console(Oracle 9.2.0.4.0)

I am using oracle 9i db (9.2.0.4.0).
when i try to launch oracle enterprise manager console i am not able to do so.
In short
After putting username, password,service,connect as ...
and clicking on OK button.
nothing happens.No message,no warning.
but i am able to connect to the same schema in sql*plus.
please suggest wat needs to be done.

I met the same problem, can use plsql to connect db (oracle 10g release2), but in the enterprise manager webpage, when I keyed in the right userid/password, nothing happen, but if I purposely key in wrong userid or password, it will show "invalide userid or password", can anyone help?

SQL Tuning using Enterprise manager in oracle 10g

Hi,
In oracle 10g you have the enterprise manager which can be used to tune sql statements using the SQL Tuning ADvisor and SQL access advisor.
I believe in oracle 10g the process of SQL Tuning is slightly easier using the Enterprise Manager ...so if some one could explain me that process...
Again thanking you in advance
regds
Manoj Gokhale

Hi Manoj,
Didn't you already start two other threads about this same question the SQL forum?
How do i do the SQL Statement tuning
Enterprise Manager - sql tuning advisor , Access advisor for SQL Tuning

Using dcmctl and enterprise manager with OracleAS 10.1.2.0.2

Hi
I know that in OracleAS 9.0.2 there were problems when you tried to use dcmctl and Enterprise Manager at the same time. Does OracleAS 10.1.2.0.2 has the same problem.

hello,
somewhere (i really don't remember where, but it was in the oracle documentation) i'm sure i read that already in 9.0.4 you could use dcmctl when enterprise manager was up. but i've never experienced it and i prefer not to try!!!
fabrizio

Need to configure Enterprise Manager after Oracle 10g installed on Windows7

I have installed Oracle 10g on Windows7 machine. At end of installation a error msg pop up saying "Enterprise Manager is not installed properly. You can install it using emca.bat file later".
I then run emca.bat file. But EM was not installed yet.
Any solution to install Enterprise Manager would be great.
Thanks.
Edited by: 889075 on Mar 23, 2013 7:34 AM
Edited by: 889075 on Mar 23, 2013 7:35 AM

889075 wrote:
I have installed Oracle 10g on Windows7 machine. At end of installation a error msg pop up saying "Enterprise Manager is not installed properly. You can install it using emca.bat file later".
I then run emca.bat file. But EM was not installed yet.
Any solution to install Enterprise Manager would be great.
Thanks.
Edited by: 889075 on Mar 23, 2013 7:34 AM
Edited by: 889075 on Mar 23, 2013 7:35 AMBTW, V10 Oracle is unsupported
which version of Oracle to 4 decimal places?
which edition of Windows 7?
How do I ask a question on the forums?
SQL and PL/SQL FAQ

How to enable and install Enterprise Manager on Oracle E-Business Suite R12

how to install Oracle Enterprise Manager. Were using single node Oracle E-Business Suite R12 (12.0.6) and our dbase version is 10.2.0, running under RedHat Linux 4 x64.
I am following the below note
How to Enable Enterprise Manager on the Oracle E-Business Suite Release 12 (Doc ID 458533.1)
These patches are not available (6272715 and 6141000)
how to proceed

I think if you are on 12.0.6 you do not need to have those patches applied -- Please query AD_BUGS table to verify if you already have those patches applied or not.
If you cannot download those patches and you still think you need it, please log a SR and Oracle support should help.
Thanks,
Hussein

Weblogic Enterprise manager with Oracle Portal

Hi All,
Iam working on a architecture defination which is basically a B2B and B2C based web applications. I intially thought the Oracle Portal+Oracle BPM as the right combination as it gives a complete technical stack as well as we will have a well defined control over the integrations.
Since the application requires high sclability and high transactions support, wanted to choose Weblogic Enterprise manager instead of oracle AS. In this context i have following quoestions
1. Will the Oracle Portal+Oracle Discoverer+Portlets(PLSQL, JAVA) can be ported onto WEBLOGIC Enterprise manager server?
2. What is the feature of OracleASOC4J?
Request to respond on this as quicly as possible
Advance Thanks,
Sreedhar

In a RAC environment database control runs by default on a master mode,when this node goes down,EM does the same. There's a comprehensive article on metalink how to handle this:
How to manage DB Control 10.2 for RAC Database with emca
Doc ID: 395162.1
Werner

Enterprise Manager for Oracle 7.3.3

How i can have enterprise manager for database server oracle 7.3.3 ? Because i've try with OEM 9.2.0 it wasnt working.. should i use OEM release 2.0.X on it? and where i can get the OEM 2.0.X ?

I am wondering whether Oracle 11g comes with
Enterprise ManagerYes it does. But Enterprise Manager is a common denominator for several products.
In 11g, "Oracle Enterprise Manager Database Control software is installed by default".
http://download.oracle.com/docs/cd/B28359_01/server.111/b28301/em_manage002.htm#BABCGBJF
http://download.oracle.com/docs/cd/B28359_01/install.111/b32002/install_overview.htm#CEGIAJCB
or not as previous versions 9i and
10g are having Enterprise Manager in its installation pack.If you are thinking of the java-based OEM Console, then by 11g it is definitely gone.
http://download.oracle.com/docs/cd/B28359_01/install.111/b32006/whatsnew.htm#BGGBABGJ

Problem In Enterprise manager with Oracle 10g AS 10.1.3.1.0

dear all,
I installed Oracle Application server 10g (10.1.3.1.0) on REDHAT Enterprise Linux 4 AS Update 4, so evrything done throu installation , but after installing when i try to open EM with browser http://localhost:7778/em not working and appear mesage (The Request URL/em was not found on this server) so i tried with ip-addressand with FQDN but not working, opmnctl service all running successfuy !!! (OC4J ,HTTP all working done - i made restat to all opmn services and the same result!!!!)
how can i solve this problem????
Thanks

Thanks Dear Jacco,
but i installed only OC4j and HTTP components , so control is working opmnctl working every think and components working good , but the strange in this case when i tried to fine emctl file but its not found !!!! (emctl start iasconsole) in this version of Oracle 10g AS .
what u think?

How can I enable Enterprise Manager in Oracle 10g?

Hi,
We recently installed Oracle 10g on a MS Window server and after the installation which we created 2 instances each with a default schema from an existing data file (.dmp). After the installation, I realized that somehow, the DBConsole entry is missing in the Windows Services which then prevent me from being able to launch the new browser-based EM.
We thought we have picked all the components during the installation but for some reasons, it seems like the necessary files or configurations for EM was not there. So I was wondering if anyone know how I can manually install and configure EM?
Initially I thought if I go thru Oracle Universal installer and re-install everything again, it might help but I am concern that it will then wipe out the 2 instances and schemas that we have already created, especially since I have also applied the 10.2.0.3 patch already. So there was some discussions on calling the emctl program which when I tried, it I got error saying that ORACLE_SID not found. Then there was also some documentation on using the EMCA command to build the dbconsole, is that what I should do?
Lastly, I was under the impression that one will only setup one EM per server, which means in a perfect world, I will have one instance of the EM which will then allow me to manage the multiple instances (and their schemas) from the same console, is that correct? Or is one EM instance only manages one instance of the database? So if I have TESTDV & TESTUT configured on the same server, I will need to also create two EM consoles?
I am an amature and am more familiar with Oracle 9i which the EM seemed to be easier to use and setup. So I think I must have skipped or missed some steps during my 10g installation but am concerned that if I reinstall, I will lose everything.
Thank you very much.

First of all, thank you as always for taking the time...
I apologize in advance if I am not using the right terminology. Basically, I have only one Oracle Home directory on that server but I am able to create two different instances and in both cases, I have left the port number to be the same thinking that it's only one physical installation. I thought I would attach my TNSNAME and LISTNER ora files below to give you a better picture of my current setup.
So for me to connect to the database and the appropriate instance for example, like using SQL Developer, all I have to do is specify the Host Name to DBServer and then the Service Name to either TESTDV or TESTUT. Then I can connect to each of the instance directly.
But I only have one Oracle_Home directory and use the same port number as the default choice. So to your comment, if I only have one Oracle_HOME and one Port number, should I only install one EM instance?
Thanks much.
******In the TNSNAMES.ORA file:*****
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
TESTDV =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = DBSERVER)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = TESTDV)
TESTUT =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = DBSERVER)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = TESTUT)
*****In the LISTNER.ORA file:*****
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_NAME = TESTDV)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
(SID_NAME = TESTDV)
(SID_DESC =
(GLOBAL_NAME = TESTUT)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
(SID_NAME = TESTUT)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = DBSERVER)(PORT = 1521))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
)

Enterprise manager in oracle 9i

Similar Messages

Maybe you are looking for