Enterprise Manager,under performance, aclick on hang analysis fails.

Hi there,
Am on 10.2.0.3.0
on my enterprise manager when am logged in as sys, when i get to performance menu and go to hang analysis,
or top activity, i get a rejection sighting wrong credentials , that i log in with the right credentials, am wondering how this is happening when am already logged in as sys and can access
all other items with no problems.
am running on three clustes with 3 instances.
Some one there to guide me.

Did you check the entries you made in your preferred credentials?
Eric

Similar Messages

Failed to install enterprise manager under linux

When I installed Oracle 10g(10.2.0.1) under linux, I got an error when running
/ora01/db/oracle/product/10.2.0.1/bin/emca within oracle universal installer.
The emConfig.log file shows such error:
oracle.sysman.emcp.exception.EMConfigException: Invalid value null for parameter PORT
at oracle.sysman.emcp.ParamsManager.checkParam(ParamsManager.java:2630)
at oracle.sysman.emcp.EMDBPreConfig.checkConfigParams(EMDBPreConfig.java:1285)
at oracle.sysman.emcp.EMDBPreConfig.checkParameters(EMDBPreConfig.java:1060)
at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:174)
at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:160)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:141)
at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:426)
at java.lang.Thread.run(Thread.java:534)
So I have to run emca after the oracle installation. I am new to this tool. I modified both tnsnames.ora and listener.ora file to set port to 1521. And then I run emca -config all db,
but now I cannot pass "entering the password for SYS user" (I already set SYS user's password to oracle, and it works when using sqlplus.) .
I am totally confused. What should I run emca to set up the enterprise manager's website? Now I can use localhost:5560/isqlplus and localhost:5560/isqlplus/dba.
Many thanks!!

I just run emca as oracle instead of root, then the password got passed, but I got new errors:
Aug 30, 2007 5:59:59 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Failed to allocate port(s) in the specified range(s) for the following process(es): JMS [5540-5559],RMI [5520-5539],Database Control [5500-5519],EM Agent [3938] | [1830-1849]
What should I do? Is running emca -config all db necessary to get enterprise manager installed?

Enterprise manager will not populate after successful login

Hi Guys
I have done a clean install on 11.1.1.6 and all I can get BIP, OBIEE Home and Weblogic fine. When I log onto Enterprise manager under http://host:port/em , I get to the log in screen and log in successfully but then I am not able to populate EM. I have tried changing the Browser to no avail.
Please help

user601798 wrote:
Very helpful.
But when asking for the Listener port number (during the emca create) where do I specify (if at all) the port I want the emctl agent to listen on? In the past I have used a port other than 1521 for the emctl agent, e.g. 1158 and 5502.
http://docs.oracle.com/cd/B28359_01/server.111/b28319/emca.htm#BABJHAHA
BTW - does this process (emca .... drop) bring down the database or does it require that the database be in another state besides 'open'. I ask this because I see from the logs that the process is 'queiscing' the database so I was wondering if all user sessions had to be terminated. Otherwise, this process will just 'sit there' as if doing a 'shutdown normal'. It is taking a while....
Dec 13, 2012 5:19:28 AM oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at /u01/app/oracle/cfgtoollogs/emca/db1/emca_2012_12_13_05_19_08.log.
Dec 13, 2012 5:19:29 AM oracle.sysman.emcp.util.DBControlUtil stopOMS
INFO: Stopping Database Control (this may take a while) ...
Dec 13, 2012 5:19:35 AM oracle.sysman.emcp.EMReposConfig invoke
INFO: Dropping the EM repository (this may take a while) ... <---?
Database can remain up and running, but will be placed into quiesced mode -
http://docs.oracle.com/cd/B28359_01/server.111/b28318/consist.htm#CNCPT1329
This may take a while if the database is active
ThanksHTH
Srini

OS Authentication with Enterprise Manager

Hello every body ,
i just started with oracle 10G release 2 and started using oracle enterprise manager to perform administrative task . i have been having proplem with the os or host credentials that need to be supplied when one need to perform administrative task . i keep getting remote exception error - invalid password for user.
i created an os user for this task but enterprise manager keep returning this error. i am running oracle on windows Xp . please somebody help out here . i need the detail steps on this .
Thanks.
Message was edited by:
[email protected]
Message was edited by:
[email protected]

This is a common problem due the permissions and security policies you must assign to the OS user. Ensure the the user has been assigned the Local Security Policy "Log on as Bacth Job".
Note: You need to read
<br>
Enterprise Manager Documentation
</br>

Error running Enterprise Manager Configuration Assistant

Dear all, another problem.
I've installed a Oracle Enterprise Linux 5 in a machine with Oracle Database 10g R2. After the installation process I started to create a Oracle Database because I hadn't done this with the Oracle Server installation process. So, everything was going fine till almost the end of the creation, when I got a message showing it hadn't been possible to configure the Enterprise Manager due to the following error:
SEVERE: Failed to allocate port(s) in the specified range(s) for the following process(es): JMS [5540-5559],RMI [5520-5539],Database Control [5500-5519],EM Agent [3938] | [1830-1849]
Refer to the log file at /app/oracle/product/10.2.0/db_1/cfgtoollogs/emca/mki/emca_2009-03-25_12-53-41-PM.log for more details.
Could not complete the configuration. Refer to the log file at /app/oracle/product/10.2.0/db_1/cfgtoollogs/emca/mki/emca_2009-03-25_12-53-41-PM.log for more details.
The message said I could do it using emca script later. I execute that script using
$ ./emca -config dbcontrol db
and I got the same error, as follows:
[oracle@treinamento bin]$ ./emca -config dbcontrol db
STARTED EMCA at Mar 25, 2009 12:53:41 PM
EM Configuration Assistant, Version 10.2.0.1.0 Production
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Enter the following information:
Database SID: mki
Listener port number: 1521
Password for SYS user:
Password for DBSNMP user:
Invalid username/password.
Password for DBSNMP user:
Invalid username/password.
Password for DBSNMP user:
Password for SYSMAN user:
Email address for notifications (optional):
Outgoing Mail (SMTP) server for notifications (optional):
You have specified the following settings
Database ORACLE_HOME ................ /app/oracle/product/10.2.0/db_1
Database hostname ................ treinamento.yoshitec.sp
Listener port number ................ 1521
Database SID ................ mki
Email address for notifications ...............
Outgoing Mail (SMTP) server for notifications ...............
Do you wish to continue? [yes(Y)/no(N)]: y
Mar 25, 2009 12:54:50 PM oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at /app/oracle/product/10.2.0/db_1/cfgtoollogs/emca/mki/emca_2009-03-25_12-53-41-PM.log.
Mar 25, 2009 12:54:51 PM oracle.sysman.emcp.DatabaseChecks performReposChecks
WARNING: 'shared_pool_size' must be greater than or equal to 80 MB.
Mar 25, 2009 12:54:52 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Failed to allocate port(s) in the specified range(s) for the following process(es): JMS [5540-5559],RMI [5520-5539],Database Control [5500-5519],EM Agent [3938] | [1830-1849]
Refer to the log file at /app/oracle/product/10.2.0/db_1/cfgtoollogs/emca/mki/emca_2009-03-25_12-53-41-PM.log for more details.
Could not complete the configuration. Refer to the log file at /app/oracle/product/10.2.0/db_1/cfgtoollogs/emca/mki/emca_2009-03-25_12-53-41-PM.log for more details.
Does anybody know how I can fix it and run the emca? I've tryed some google searches but I didn't have any luck.
Thanks a lot.

Hi schavali
I'll try to explain better what's going on with this database Im configuring. So, I installed OEL 5 from the zero, in a new machine, to install Oracle DB Server 10g R2 later on. I did the first step and the second one, which were Install OEL 5 with the packages needed and Oracle Database Server 10g R2. After these installations I went to create a database (I called it mki with SID mki). OK? So, when everything was done, almost at the end of the database creation I got a message that Enterprise Manager failed because it wasnt possible to allocate ports in the specifics ranges for JMS RMI Database Control and Em Agent.
When I run netca I got a message saying the Listener could not be started because another software was using the port 1521.
I did what you suggested. Ignored the listener port and tryed to create manually those ports necessary to run emca.
In the terminal, I typed:
$. emca -config dbcontrol db -repos create -JMS_PORT 5540 -RMI_PORT 5520 -DBCONTROL_HTTP_PORT 5505 -AGENT_PORT 1830
So, the problem is, I didnt get to create any of those ports. I tryed every single port number that wasnt listed as free in /etc vi services and I could not go through. I tryed as a oracle user and with root as well. When I type a port that is not listed in the services, sometimes the error I get says that emca cannot create that port because is out of the range.
Following the procedure to OEL 5 installation, I read it's necessary to select all the packages neeed by Oracle DB 10g R2 and it's also necessary to leave all others unselected. I didnt do that, I installed almost all the packages listed there in the installation. Could be that the problem? That is, if I install OEL 5 again with just the packages needed by Oracle DB could I go through Oracle Enterprise Manager Configuration Assistant? It's just a doubt.
Thanks a lot for your attention

Stopping the Enterprise Manager Console (Oracle 10g on SuSE 9.1)

I'm trying to stop the Enterprise Manager Console by issuing the command:
${ORACLE_HOME}/bin/emctl stop dbconsole
Unfortunately, the command fails to stop the EM Console. Here's the output I get:
TZ set to US/Pacific
Oracle Enterprise Manager 10g Database Control Release 10.1.0.2.0
Copyright (c) 1996, 2004 Oracle Corporation. All rights reserved.
http://<hostname>:5505/em/console/aboutApplication
Stopping Oracle Enterprise Manager 10g Database Control ...
--- Failed to shutdown DBConsole Gracefully ---
failed.
The only way I can stop the EM Console (and related services--i.e., emagent) is to kill its process.
Everything (Listener, DB Instance, EM Console) starts fine. I can stop the Listener and DB Instance without any problems. It's just the EM Console shutdown that doesn't happen cleanly.
Has anyone else encountered the same condition? If so, what was the solution?
Here's my operating environment:
SuSE 9.1 (Kernel 2.6.5-7.108-default)
Oracle 10g
Thanks in advance for any help/insight.

Has anyone else encountered the same condition? If so, what was the solution?Yes. Shutdown/reboot of the system made the error go away.
Sorry, no better clues,
Toni

Problem Autodiscovery of node from Enterprise Manager

We are using Oracle Enterprise Manager 2.1.0.1.0 through Management Server on NT for Oracle 8i(8.1.6) on Linux
While autodiscovery of node from Enterprise Manager I am getting following
error
"Discovery Failed VNI-4002:Unknown gateway Exception"
Even Intelligent agent and all the requisite services are started.
If we configure manually we will get
following error while using the tools of management pack
"VTO-2018 This wizard Couldnt be launched because target was manually
configured.It can only be launched for targets which have been discovered using an Intelligent Agent."
I shall be thankful if you provide the solution ASAP
Thanks
Micky
null

Hi,
Error: wrong password for user
Are you grant LOG ON AS AN BATCH job to OS USER.
OR
before emctl command you always set ORACLE_SID enviourment variable.
regards
Taj

Can not stop cleanly Oracle Enterprise Manager 10g

Hi,
i can not stop cleanly the OEM (Oracle 10.2.0.1.0) on my Debian 3.1.
saturn:~# su - oracle -c "/u01/app/oracle/product/10.2.0/db_1/bin/emctl stop dbconsole"
TZ set to Europe/Berlin
Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
http://saturn:1158/em/console/aboutApplication
Stopping Oracle Enterprise Manager 10g Database Control ...
--- Failed to shutdown DBConsole Gracefully ---
failed.
When i look into the processlist i see the running agent :-(
oracle 25434 0.0 0.3 70188 14296 ? S Nov29 0:31 /u01/app/oracle/product/10.2.0/db_1/bin/emagent
Any ideas to stop the OEM-Agent Console cleanly, without hard kill the process?
Thanks!
Blue

I have read there is a bug in EM-Konsole, i help me with the kill commands:
killall emagent
killall perl
killall java
Sorry, thats not a fine solution, but it works.
Blue

Enterprise Manager - Hang Analysis

I am using Oracle 10g Release 1 . On Enterprise Manager , Hang Analysis I am looking for a way to examine data from the last 40 hours. I had some frozen sessions starting yesterday morning and am searching for possible causes. The system is working fine at the moment. On the hang analysis option on Enterprise Manager there doesn't seem to be a way of examing past data.

Did you check the entries you made in your preferred credentials?
Eric

How to configure Enterprise Manager Database Control (EMDC) to make it work on 2 servers working (primary and standby) under DG rules

Hello everybody i use Oracle Database EE 11.2.0.4 with DG.
In those cases i need to get Enterprise Manager Database Control running against DB with no RAC and no DG i perform the following steps:
I Logon SQLPLUS as user SYS or SYSTEM, and drop the sysman account and management objects:
DECLARE
CURSOR c1 IS
SELECT owner, synonym_name name
FROM dba_synonyms
WHERE table_owner = 'SYSMAN';
BEGIN
FOR r1 IN c1 LOOP
IF r1.owner = 'PUBLIC' THEN
EXECUTE IMMEDIATE 'DROP PUBLIC SYNONYM '||r1.name;
ELSE
EXECUTE IMMEDIATE 'DROP SYNONYM '||r1.owner||'.'||r1.name;
END IF;
END LOOP;
END;
DROP USER mgmt_view CASCADE;
DROP ROLE mgmt_user;
DROP USER sysman CASCADE;
After that i run
emca -config dbcontrol db -repos recreate
But what should i do in cases i have 2 servers working (primary and standby) under DG rules?

Hi ,
It is not possible to monitor/administer a Logical or Physical Standby database, i.e Data Guard, using Enterprise Manager Database Control. This is primarily due to the fact that Database Control is designed to monitor 1 database and a Data Guard environment, by definition, includes more than 1 database.
If you attempt to run emca against a standby Database, you will get an error like (i.e. ORA-01219: database not open).
Database Control, can, of course, be used to monitor the current Primary database (with no ability to administer or monitor Data Guard related functionality). In such a case, when failover occurs Database Control must be reconfigured to run on the new Primary database using the commands detailed in Note 278100.1 How To Drop, Create And Recreate DB Control In A 10g Database, section C. Recreate/ReConfig DB Control, Option 2. Recreate the DB Control Configuration Files and Repository.
Enterprise Manager Grid Control or Cloud Control provides the functionality for viewing, monitoring, and administering primary and standby databases in a Data Guard configuration.
Reference: Is it Possible to Configure Database Control for a Logical or Physical Standby Database? (Doc ID 315116.1)
You can use EM 12c cloud control to monitor and manager Standby DB effectively
Ref to below link for details
Set Up and Manage Oracle Data Guard using Oracle Enterprise Manager Cloud Control 12c
Regards,
Rahul

Performance tab not working in Enterprise Manager for user with dba role

Database: 11g2
New to Oracle. Don't want share SYS user account among dbas. Tried to create user with dba role to perform all tasks.
1. Removed DBMS_JOB, DBMS_LOB, UTL_FILE, UTL_HTTP, UTL_SMTP, and UTL_TCP from PUBLIC
2. Created user dbauser1 with dba role
3. Log in as dbauser1 in Enterprise Manager
After click Performance tab, it just went straight to "Database Login" page. No error message.
Any suggestions or advice will be appreciated.
piaoma

Hi Gourav,
This is the wsdl url:
http://hostname:8000/sap/bc/srt/wsdl/bndg_E04711310A0E55F1A0E3005056B03D6F/wsdl11/allinone/ws_policy/document?sap-client=450
Kind Regards,
Richard

Oracle Enterprise Manager "Performance" tab (Oracle 10g)

Hi,
How to I make a report based on Performance TAB.
View Data -> Historical
Sessions
Runnable Process
Active Sessions
Instance Disk i/o
Instance throughput
Explain : What is (example :*what is session for?* ) , What is X and Y (example :*what is X = Y= Time and date*)
Please reply.. I need it by today.. :(

The help file explains it a lot better than I can... therefore:
Interpreting the Host: Average Runnable Processes Chart
If you have opted to show both the CPU cores and CPU threads,
consistent values somewhere between the two line values may
indicate that too many users are waiting in line for CPU time.
Compare the values with those of CPU Used in the Average Active
Sessions chart. If the sessions value is low and the run queue
length value is high, this indicates that something else on the host
other than your database is consuming the CPU.
If you have selected Memory Access mode, the Host chart does
not initially display historical data, except when the screen was
loaded recently and cached historical data is still available. Host data
is cached starting from the time the screen was first accessed,
and gradually fills the history on the Host chart.
Interpreting the Average Active Sessions Chart
The Session Count is computed by categorizing the time
that all active sessions consumed in the last sampling interval
into different wait classes, summing the amount in each wait class,
and dividing it by the sampling interval. For example, If there
are 3 active sessions in the last 15-second sampling interval, and
each session spent half of the time (7.5 seconds each) on CPU
and half of the time idling, then 3 x 7.5 / 15 = 1.5 active sessions
on CPU appear for that sampling interval.
Compare the peaks on the Average Active Sessions chart with those
on the Instance Throughput charts. If the Average Active Sessions
chart displays a large number of sessions waiting, indicating internal
contention, but throughput is high, then the situation may be
acceptable. The database is probably also performing efficiently if
internal contention is low but throughput is high. However, if internal
contention is high but throughput is low, then consider tuning the database. Selecting Memory Access Mode for Slow or Hung Systems
You can click the Monitor In Memory Access Mode link in the Related Links section to enable Memory Access Mode. The Database Performance page reappears with a Disable Memory Access Mode button and a Switch to SQL Access Mode button in the upper right corner.
You can temporarily disable Memory Access Mode by clicking this button, upon which the Database Performance page reappears in SQL Access Mode. To reactivate Memory Access Mode, click the Monitor In Memory Access Mode link again, then click Enable Memory Access Mode when the Database Performance page reappears.
In Memory Access Mode, performance statistics are retrieved directly from the Shared Global Area (SGA) using optimized/lightweight system-level calls as an alternative to SQL. Memory Access mode avoids the computation associated with parsing and executing SQL statements, thereby making it ideal for severe cases of library cache contention that can prevent the instance from being monitored in SQL Mode. You should switch to Memory Access Mode for slow or hung systems.
Pages in Memory Access Mode contain data sampled at a higher frequency than pages in SQL Mode. (Charts may appear to be slightly different from SQL mode for this reason.) Consequently, Enterprise Manager provides better information about where events begin and end, and can also handle short-duration events that might otherwise be missed.
>
It basically tells you how much of a given resource was used at a point in time.
John

Hi Folks, I have a problem with OBIEE EM, There in Enterprise Manager i am unable to navigate into the options like when i clik on any Tab it is not working and even i am unable to create a report using analysis.

Hi Folks,
I have a problem with OBIEE EM, There in Enterprise Manager i am unable to navigate into the options like when i clik on any Tab it is not working and even i am unable to create a report using analysis.
Thanks in advance

i have also tried that but no use can u give me any other way.......

Enterprise Manager "Performance" tab is suddenly disabled.

I've been logging onto Enterprise manager using the same credentials for months with
no problem. Today I logged in and I suddenly can't access the performance tab
on EM. I usually logon as sys as sysdba.
I DID change some DB init. parameters, increasing the number of processes and cursor resources but that's it.
Why is my "Performance" tab disabled now ?
How can I get it back ?

Try logging into your OEM again.
Then go to 'setup' in your upper right corner.
Once in the setup screen, go to the left border menu and select "Management Pack Access".
Take a look if you have a check in the box for 'Database Diagnostic', and one for 'Database Tuning'

Facing error while performing hang analysis in RAC database.

Hi,
We have been performing hang analysis in one of our RAC databases. While doing this we faced the below error after executing the systemstate command.
SQL> oradebug -g all dump systemstate 266
Error 601 encountered by local DIAG [ospid=11984]
Error 601 encountered by remote DIAG [ospid=25384][instance=2]
Error 601 encountered by remote DIAG [ospid=688][instance=3]
Please help us to troubleshoot this and guide us on how to proceed.
Database version is as follows.
11.1.0.7
OS version is as follows,
$ uname -a
SunOS isdtarhp001 5.10 Generic_144488-06 sun4v sparc SUNW,T5240
$ isainfo -vk
64-bit sparcv9 kernel modules

Hi..
Check the note # SAP Note 1121978
SAP Note 1121978 - Recommended settings to improve peformance risk analysis.
Check for the following...
CONFIGTOOL>SERVER>MANAGERS>THREADMANAGER
ChangeThreadCountStep =50
InitialThreadCount= 100
MaxThreadCount =200
MinThreadCount =50
Regards
Gangadhar

Enterprise Manager,under performance, aclick on hang analysis fails.

Similar Messages

Maybe you are looking for