Enterprise manager version with Oracle 11g

Which version of Enterprise Manager do I need to install with 64 bit Oracle 11g. What is the latest version? Where can I get this information. The latest version that I could find for download on Oracle website is 10.2.0.4, but the one that comes with 11g Enterprise edition says 11.1 (the one without the Grid control).

The latest grid control is 10.2.0.4 - note that you have to turn off instance status metric or you get too many files open - a bug that they are doing a patch for.
You are correct thou - 11g DB control is bundled with the db, but that is db control not grid control - a similar but unique product.

Similar Messages

Unable to drop Oracle Enterprise Manager console in Oracle 11g

Hello all,
I am trying to drop the Oracle Enterprise Manager console in Oracle 11g (Windows server 2008 32 bit). I am getting the following error.
D:\Oracle\Ora11G\BIN>emca -deconfig dbcontrol db -repos drop
STARTED EMCA at Jun 16, 2009 9:59:58 PM
EM Configuration Assistant, Version 11.1.0.7.0 Production
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Enter the following information:
Database SID: NM45
Listener port number: 1529
Password for SYS user:
Password for SYSMAN user:
Password for SYSMAN user:
Do you wish to continue? [yes(Y)/no(N)]: y
Jun 16, 2009 10:00:20 PM oracle.sysman.emcp.util.EMCALogManager addLogFileIntern
al
WARNING: Adding log file D:\Oracle\Ora11G\cfgtoollogs\emca\ENMSCSDB\emca_2009_06_16_22_00_20.log failed. Messages will not be logged in this file.
Jun 16, 2009 10:00:20 PM oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at D:\Oracle\Ora11G\cfgtoollogs\emca\ENMSCSDB\emca_2009_06_16_22_00_20.log.
Jun 16, 2009 10:00:21 PM oracle.sysman.emcp.util.DBControlUtil stopOMS
INFO: Stopping Database Control (this may take a while) ...
Jun 16, 2009 10:00:22 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Can't find file D:\Oracle\Ora11G\F1SMLFS_NM45\sysman\config\emoms.properties
Refer to the log file at D:\Oracle\Ora11G\cfgtoollogs\emca\ENMSCSDB\emca_2009_06_16_22_00_20.log for more details.
Could not complete the configuration. Refer to the log file at D:\Oracle\Ora11G\cfgtoollogs\emca\ENMSCSDB\emca_2009_06_16_22_00_20.log for more details.
D:\Oracle\Ora11G\BIN>
Even though the D:\Oracle\Ora11G\F1SMLFS_NM45\sysman\config\emoms.properties is exists in the disk. Any Idea.
In Oracle 9i " Enterprise manager Configuration Assistant" (Open “Start ---> Programs ----> Oracle - OraHome92 ---> Configuration and Migration
Tools -----> Enterprise manager Configuration Assistant) was present. Is there any replacement of this in Oracle 11g ?
Thanks
With Regards
Hemant

hem_kec wrote:
Hello all,
I am trying to drop the Oracle Enterprise Manager console in Oracle 11g (Windows server 2008 32 bit). I am getting the following error.
D:\Oracle\Ora11G\BIN>emca -deconfig dbcontrol db -repos dropBefore this you shoud do :
ORACLE_HOME/bin/emca -x <sid>
ORACLE_HOME>/sysman/admin/emdrep/bin/RepManager <hostname> <listener_port> <sid> -action drop
Refer to the log file at D:\Oracle\Ora11G\cfgtoollogs\emca\ENMSCSDB\emca_2009_06_16_22_00_20.log for more details.did you check this log ?
Even though the D:\Oracle\Ora11G\F1SMLFS_NM45\sysman\config\emoms.properties is exists in the disk. Any Idea.yes. you could visit metalink and see 278100.1 How To Drop, Create And Recreate DB Control In A 10g Database
In Oracle 9i " Enterprise manager Configuration Assistant" (Open “Start ---> Programs ----> Oracle - OraHome92 ---> Configuration and Migration
Tools -----> Enterprise manager Configuration Assistant) was present. Is there any replacement of this in Oracle 11g ?
Thanksok
With Regards
Hemantbest regards

How to Connect SQL Server enterprises Manager Version 8.0 with Form 6i

Dear experts
I want to know that How can I connect SQL server Enterprise Manager Version 8.0 with Forms/reprots 6i.
currently I have oracle 9i database at server windows 2003 and I also connected with client (my PC) I work on server.
I also have SQL server in that server 2003 machine and this SQL Server also work with other clients that have VB program.
I want to know that can I connect with this SQL server with Form 6i?

You can't. The closest thing would be to create links in an oracle database to the SQL Server database using Heteregeneous Services and connect forms to the that.
This forum is for the SQLDeveloper tool. You will get more complete answers in the "Database General", or "Heterogeneous Services" forums

Oracle Tuxedo 8.1 With Oracle 11g Database

Hi,
I have an old application that must be compiled with oracle 8.1 and Oracle9i Database.
We are migrating to Oracle 11g Database, and now we have some inssues to compile with Oracle 11g Database. For example some Libraries that the Tuxedo XA Resource Manager needs from the Oracle Database, that just u can found on older versions like Oracle9i (kpudfo.o file).
what can be the solution for that problem?
An Oracle 11g database config or a Tuxedo config ?

Hi,
When you say "Tuxedo XA Resource Manager" I'm not sure what you are referring to. Do you mean the Tuxedo transaction management servers (TMS) servers that are built with the buildtms command? If so, if there are linking errors, it has to do with either your library paths or the RM definition for Oracle Database in the $TUXDIR/udataobj/RM file. Tuxedo itself only uses the XA switch from the resource manager such as Oracle database. Now the resource manager may require a bunch of libraries, which is why I suggested you check your library path. If the above doesn't help, can you post the error you are getting and what is generating/creating the error?
Regards,
Todd Little
Oracle Tuxedo Chief Architect

Cannot start Enterprise Manager for Fusion Middleware 11g

Dear all,
Because I want to install Oracle EGRCM v8.0.1 in Linux x86_64, so I installed Oracle Weblogic 11gR1 and SOA Suite 11g first.
After installation successfully, I created a base_domain as default, and can start weblogic administration server ( http://localhost:7001/console ) successfully.
Now I want to use Enterprise Manager for Fusion Middleware 11g. Per "*Oracle® Fusion Middleware Administrator's Guide 11g Release 1 (11.1.1)*", the EM should be available now and the access URL should be http://localhost:7001/em . But when I try to access it, the following error returned:
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
+10.4.5 404 Not Found+
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
So I try to start with emctl in *$MW_HOME/oracle_common/bin/*, the error is as following:
+./emctl: line 387 /d02/Middleware/oracle_common/perl/bin/perl: No such file or directory+.
I check the path and find out that no directory named "perl" under */d02/Middleware/oracle_common*. So I try to copy the necessary dir from the dir installed Oracle Database 11g ( *$ORACLE_HOME* ), but it returns following error:
OC4J Configuration issue. /d02/Middleware/oracle_common/sysman/j2ee not found.
I try to copy necessary dir from *$ORACLE_HOME* but still cannot start EM.
Please give some advise about how I can start EM for Fusion Middleware 11g, any idea is appreciate!
Best Regards,
Kenny Wang

Ravi Jegga wrote:
Hi Kenny
See this post of mine: Re: Fusion Middleware Console
For any SOA Domain, unless you have Enterprise Manager Facet enabled (during domain creation process or adding later on by extending it), you will not be able to access the EM Console. For quick testing, open config.xml file for your domain and check the modules specially em module as shown below. It should be there. This is for one of my SOA Cluster Domains with SOA on top of WLS 10.3.2
<app-deployment>
<name>em</name>
<target>AdminServer</target>
<module-type>ear</module-type>
<source-path>C:\beawls1032\user_projects\applications\soaDomainCluster1/em.ear</source-path>
<deployment-order>400</deployment-order>
<security-dd-model>DDOnly</security-dd-model>
<staging-mode>nostage</staging-mode>
</app-deployment>
Thanks
Ravi JeggaHello Ravi:
I too like Kenny experienced the EXACT same thing this morning. I was trying to figure out how to modify the formsweb.cfg and I remembered from when I install Oracle9i/10g AS a few years back, that it was on the Enterprise Manager Console for forms (different than the EM for the database). Well that's different than the consoles for Weblogic Server and Weblogic Server for Forms. I ran into the same errors Kenny did, and I followed your steps except that I did install into the domain the Enterprise Manager so when I looked at the config.xml I do see the same code that you posted above. Yet I still get the error when accessing
http://computer:7001/em
Also when trying to run emctl (I copied the perl directory from the database) and same error as Kenny. Any tips/clues?
I'm running on Red Hat Enterprise Linux 5, Oracle 11g (database, Fusion Middleware).
Thanks,
Gio

Problem with Oracle 11g(32 bit) installation on windows 7 ultimate edition

Hello all,
I have a problem with Oracle 11g(32 bit) installation on windows 7 ultimate edition (32 bit).
I have successfully installed it immediately after OS installation. But today, i have decided to deinstall it and go for Oracle 10g version for 32 bit.
Everything went normal during installation, but i can see the services is not present in services.msc. Also its throwing some exception for dbca, netca
Now i tried to deinstall it and again go for 11g. But even the same story here..
Can anybody give me a solution for this..
-Regards
Rajesh Menon

Saqib Alam wrote:
i recently install Oracle 11g R1 on windows 7 ultimate, i installed it and working perfectly.
ur problem is that u install latest version and now u trying to installing old version.
now u need to uninstall 10g and delete oracle from services, if the probleme presist then u should
install fresh windows 7.
Regards
SaqibNo need to install a fresh OS. That's like tearing your house down just because you wired a lamp wrong and blew a circuit breaker.
There are MeaLink notes on how to eradicate an Oracle install from Windows, but it boils down to this:
Stop all Oracle services
In the registery:
- Delete all oracle services from the register (HKLM\SYSTEM\CurrentControlSet
- Delete the entire Oralce folder from HKLM\Software
reboot
Delete the ORACLE_HOME directory and any other Oracle related directories/files. Offhand, it seems like there is an Oracle directory under Program Files.
reboot

Error Intall RWD Uperform 4.3 on Windows 2008 with Oracle 11G

Hi,
I need install RWD Uperform 4.3 on Windows 2008 with Oracle 11G.
When tried install Uperform 4.3 occurs the next error:
Product: RWD uPerform Server -- This Release requires Oracle 11.2 R2 ODP Client to be Installed.
If you are not using Oracle, please use the regular 4.30.0 release.
If you are using Oracle, please install ODP.NET and then re-run the Setup. Setup will be aborted now.
I installed the ODP.NET whit the version 11.2.0.2.
But the errors still occur.
Thanks.
Marco Kolombesky

In the end I solved my problem.
But I installed RWD uperform 4.4 (not 4.3).
But I think that the problem was that when I installed uperform 4.3 I didn't run this command at DB level on my SQL Server datadabe:
ALTER DATABASE AdventureWorks2008R2
SET READ_COMMITTED_SNAPSHOT ON;
GO
Regards
Matteo Stocco

Help with oracle 11g pivot operator

i need some help with oracle 11g pivot operator. is it possible to use multiple columns in the FOR clause and then compare it against multiple set of values.
here is the sql to create some sample data
create table pivot_data ( country_code number , dept number, job varchar2(20), sal number );
insert into pivot_data values (1,30 , 'SALESMAN', 5000);
insert into pivot_data values (1,301, 'SALESMAN', 5500);
insert into pivot_data values (1,30 , 'MANAGER', 10000);
insert into pivot_data values (1,301, 'MANAGER', 10500);
insert into pivot_data values (1,30 , 'CLERK', 4000);
insert into pivot_data values (1,302, 'CLERK',4500);
insert into pivot_data values (2,30 , 'SALESMAN', 6000);
insert into pivot_data values (2,301, 'SALESMAN', 6500);
insert into pivot_data values (2,30 , 'MANAGER', 11000);
insert into pivot_data values (2,301, 'MANAGER', 11500);
insert into pivot_data values (2,30 , 'CLERK', 3000);
insert into pivot_data values (2,302, 'CLERK',3500);
using case when I can write something like this and get the output i want
select country_code
,avg(case when (( dept = 30 and job = 'SALESMAN' ) or ( dept = 301 and job = 'SALESMAN' ) ) then sal end ) as d30_sls
,avg(case when (( dept = 30 and job = 'MANAGER' ) or ( dept = 301 and job = 'MANAGER' ) ) then sal end ) as d30_mgr
,avg(case when (( dept = 30 and job = 'CLERK' ) or ( dept = 302 and job = 'CLERK' ) ) then sal end ) as d30_clrk
from pivot_data group by country_code;
output
country_code          D30_SLS               D30_MGR               D30_CLRK
1      5250      10250      4250
2      6250      11250      3250
what I tried with pivot is like this I get what I want if I have only one ( dept,job) for one alias name. I want to call (30 , 'SALESMAN') or (301 , 'SALESMAN') AS d30_sls. any help how can I do this
SELECT *
FROM pivot_data
PIVOT (SUM(sal) AS sum
FOR (dept,job) IN ( (30 , 'SALESMAN') AS d30_sls,
          (30 , 'MANAGER') AS d30_mgr,
(30 , 'CLERK') AS d30_clk
this is a simple example .... my real life scenario is compliated with more fields and more combinations .... So something like using substr(dept,1,2) won't work in my real case .
any suggestions get the result similar to what i get in the case when example is really appreciated.

Hi,
Sorry, I don't think there's any way to get exactly what you requested. The values you give in the PIVOT ... IN clause are exact values, not alternatives.
You could do something like this to map all alternatives to a common value:
WITH     got_dept_grp     AS
     SELECT     country_code, job, sal
     ,     CASE
              WHEN job IN ('SALESMAN', 'MANAGER') AND dept = 301 THEN 30
              WHEN job IN ('CLERK')               AND dept = 302 THEN 30
                                                                 ELSE dept
          END     AS dept_grp
     FROM     pivot_data
SELECT     *
FROM     got_dept_grp
PIVOT     (     AVG (sal)
     FOR     (job, dept_grp)
     IN     ( ('SALESMAN', 30)
          , ('MANAGER' , 30)
          , ('CLERK'   , 30)
;In your sample data (and perhaps in your real data), it's about as easy to explicitly define the pivoted groups individually, like this:
WITH     got_pivot_key     AS
     SELECT     country_code, sal
     ,     CASE
              WHEN job = 'SALESMAN' AND dept IN (30, 301) THEN 'd30_sls'
              WHEN job = 'MANAGER' AND dept IN (30, 301) THEN 'd30_mgr'
              WHEN job = 'CLERK'    AND dept IN (30, 302) THEN 'd30_clrk'
          END     AS pivot_key
     FROM    pivot_data
SELECT     *
FROM     got_pivot_key
PIVOT     (     AVG (sal)
     FOR     pivot_key
     IN     ( 'd30_sls'
          , 'd30_mgr'
          , 'd30_clrk'
;Thanks for posting the CREATE TABLE and INSERT statements; that really helps!

IPlanet 6.0 SP6 compatibility with Oracle 11g Client in Windows server 2003

Hi All,
We have issues with our classic ASP application when connecting to Oracle 11g. Our application Database is migrating from oracle 10g to oracle 11g, with oracle 10g we don't have any issues but we are facing issues with Oracle 11g database
We are running iPlanet-WebServer-Enterprise/6.0SP6. And Chilisoft is Sun ONE ASP 4.0 (formerly known as Chili!Soft ASP) on windows 2003 machine for running ASP application.
The connection we are trying is
Provider=OraOLEDB.Oracle; Data Source=xxxx;User Id=xxx;Password=xxx;
The error we are getting is "OraOLEDB error '80004005' "
Question: Is iPlanet-WebServer-Enterprise/6.0SP6. And Chilisoft is Sun ONE ASP 4.0 is compatible with Oracle Client 11g in Windows 32 bit machine
Appreciate your quick response
Thanks,
Murthy

I have the same situation. Could you please share your experience if you resolve it? Thanks.

Works in Enterprise Manager version of 10g but not standalone (OC4J)

ok.... on one box I'm running 10g Enterprise Manager version of the app server (v9.0.4) and on another box I'm running the standalone version of the app server (OC4J v9.0.4). I have an ear file that works in the EM version, but won't work in the OC4J version. (the ear worked in both app servers until recently when we added some code using classes in jakarta-poi-2.0-pre3.jar..... added this jar file to the WEB-INF/classes folder of the ear file; the orion-application.xml file library path points to this folder for its library (because some of our classes on the EJB side of things use the classes in the jar file) so in theory the jar file should be found by the application (and there are other jar files in there that ARE being found on both versions....)). So.... any ideas why the standalone version (OC4J) would be having problems? Could it be that a different classloader setup is used in OC4J?
Scott

well, I found the problem.... the orion-application.xml file in the C:\OC4J\j2ee\home\application-deployments\[appname] folder was not being updated with the new version upon redployment.... don't know why that wasn't happening. I'm using hot deploy and redeploying the application by copying the ear file to the C:\OC4J\j2ee\home\applications folder. Shouldn't this cause a refresh of the files in the application-deployment folder too?? In any case, I manually edited the orion-application.xml file in the application-deployments folder to reflect the new library conditions and it works..... Additional info: i just redeployed the app again, and the timestamp on the .../application-deployments/orion-application.xml file was updated, so it appears that it is being updated but apparently from a cached version that does not reflect the new version of the orion-application.xml file in the new ear being deployed.... strange and sad.

Pro*C with Oracle 11g

Hi !
I didn't find a forum specific to pro*c, so here i am because i was told this forum had a bit of pro*c activity....
I've downloaded Oracle 11g and recompiled our applications using pro*c
We currently precompiling without any problem our sources against Oracle 7, 8, 9, 10.
With Oracle 11g, it doesn't work !
every EXEC SQL followed by a command works.
every EXEC SQL followed by a query generates the same error.
Example :
char *oracle_date_courante()
static char buf[SIZE_ORADATE+1];
EXEC SQL SELECT sysdate into :buf from DUAL;
if(ORA_SQLERROR())
oracle_error("sélection date courante");
buf[0]=0;
return buf;
PRO*C output :
Erreur Ó la ligne 105, colonne 2 dans le fichier src\oracle.pc
EXEC SQL
.1
PLS-S-00000, SQL Statement ignored
erreur sÚmantique Ó la ligne 105, colonne 2, fichier src\oracle.pc:
EXEC SQL
.1
PCC-S-02346, PL/SQL a trouvÚ des erreurs sÚmantiques
So, we investigated... And found that thoses errors come when we use the option sqlcheck=semantics.
If we use an inferiour check level, it works but because we use PL/SQL keywords, pro*c prints errors and wants us to provide the 'semantics' sqlcheck level !
So, it's a vicious circle !
Any ideas ?
Thanks...
Vincent

Adding the option common_parser=yes removes the errors !
But brings errors linked to the PL/SQL parser such like
CSF-S-00000, ORA-06544: PL/SQL : erreur interne, arguments : [55916], [], [], []
1>, [], [], [], []
1>ORA-06553: PLS-801: erreur interne [55916]
Really vicious..and still not precompiling !
By the way : Server is 10.2.0.1... and i guess thoses errors are normal since the common parser is not available in this version...
So bye bye option common_parser and i'm back to my orignals errors.
Message was edited by:
Vicenzo

Oracle SQL Developer 1.2 – Automatic - is compatible with Oracle 11g?

Oracle SQL Developer 1.2 – Automatic - is compatible with Oracle 11g?
Thanks in advance!
-Babu

So I'm taking it the question is -
Is 1.2 Sql Developer compatible with 11g DB?
The short answer is Yes. We are constantly adding new functionality and better support for the newer Databases. For Example to use the real time Sql monitoring that became available in 11g you will have to be on at least 2.1 Sql Dev. Is there some reason you don't want to upgrade to the latest Sql Dev? If not the current EA version then at least the current production version?
Thanks,
Syme

Is practising on Oracle OLAP features free with Oracle 11g EE?

Hi,
Is practising on Oracle OLAP features free with Oracle 11g EE??
Information found in Internet:
- Oracle Corporation markets the Oracle Database OLAP Option as an extra-cost option to supplement the "Enterprise Edition" of its database.
- Oracle Database OLAP is there pre-installed along with the rest of Oracle Database EE. You just need to license it for use on the DB Machine when you choose to use it.
- Oracle OLAP is a world class multidimensional analytic engine embedded in Oracle Database 11g.
Please confirm if I can try some OLAP features in my office where I have Oracle 11g EE installed as I have been asked to do an initial POC?
Regards,
Sudhir

Hi there,
I believe that the OLAP license falls under the developer license on OTN - http://www.oracle.com/technetwork/testcontent/standard-license-088383.html
You should contact your local Oracle sales rep if you are still unsure
Thanks,
Stuart Bunby
OLAP Blog: http://oracleOLAP.blogspot.com
OLAP Wiki: http://wiki.oracle.com/page/Oracle+OLAP+Option
OLAP on OTN: http://www.oracle.com/technology/products/bi/olap/index.html
DW on OTN : http://www.oracle.com/technology/products/bi/db/11g/index.html

Is it possible to run Oracle 6i application with Oracle 11g?

HI,
We are running oracle developer 6i (6.0) application with oracle 10g database.
Due to some management decisions we are in planning to upgrade the database to 11g.
So, tell us that Is it possible to run Oracle 6i application with Oracle 11g?
Regards,
fazijee

Also see Oracle Support note
Is Forms/Reports 6i Certified to Work Against Oracle Server 10g Rel 1, Rel 2 or 11gRel 1, Rel 2? [ID 338513.1]
6i isn't certified nor will be certified against 10.2 and 11.x
Hemant K Chitale

Deployment Manager Error with Oracle Weblogic Server 10.3.1

I have installed Identity Manager 9.1.0.2 (patch upgraded from 9.1.0.1) on OEL 5.3 64bit and Weblogic 10.3.1
Database:Oracle 11gR2 (remote machine).
**I am aware that IM 9.1.0.2 is not certified on Weblogic 10.3.1 (it is only certified on 10.3),
The installation was successful and OIManager is up and running. Able to create Users, Resources etc. as well.
As part of configuring OIM Connectors tried to Import .xml file using Import option from Deployment Management section as below and the following error was displayed.
"Either your session timed out or you are trying to access a page without logging in".
Did all workarounds like enabling java, changing browsers, restarting machine etc as per the below discussion but in vain.
Deployment Manager Error with Oracle Weblogic Server
Can any one suggest any workaround or solution for this problem.
Or atleast can any one confirm there is no Identity manager available on this date which is compatible with 10.3.1? and cannot be continued further.
Thanks in Advance
Sudheer
Edited by: SudheerPrabhala on Oct 20, 2009 1:26 AM

You are facing this issue because you're using a non certified combination.
Other folks who tried to use OIM in 10.3.1 ended up in the same problem you're facing.

Enterprise manager version with Oracle 11g

Similar Messages

Maybe you are looking for