Enterprise Manager with IPC Protocol

Anybody knows How can I configure the IPC key values in Enterprise Manager 9i to work with a local database?
I would appreciate any help.

Your potential problem is Enterprise Manager simply doesn't KNOW about that second listener. You can easily verify that when you look at the monitored targets.
Enterprise Manager also reconstructs automagically it's own tnsnames.ora! So, it doesn't connect to second -completely redundant and useless - listener, because the tnsnames.ora entry on the Management Sever is incorrect.
Simply because you didn't made sure OEM could discover the second -completely redundant and useless- listener.
I notice you apparently don't want to read documentation. Yet the only way to work successfully with Oracle, and to become independent, is to read that documention.
Apart from that you should be able to find agentca.bat on your OS with one command, so, yes, I pointed you to the documentation, yes, you can find agentca.bat.
Sybrand Bakker
Senior Oracle DBA

Similar Messages

Configure Enterprise Manager with multiple Listener

Configure Enterprise Manager with multiple Listener
I have created 2 listeners and connected my database with both the listeners. If I stop one listener then it automatically uses second listener vice versa. But facing problem in case of enterprise manager. If i stop first listener which is on 1521 port it is not connecting to another listener which is on 1522 port.
any help ?

Your potential problem is Enterprise Manager simply doesn't KNOW about that second listener. You can easily verify that when you look at the monitored targets.
Enterprise Manager also reconstructs automagically it's own tnsnames.ora! So, it doesn't connect to second -completely redundant and useless - listener, because the tnsnames.ora entry on the Management Sever is incorrect.
Simply because you didn't made sure OEM could discover the second -completely redundant and useless- listener.
I notice you apparently don't want to read documentation. Yet the only way to work successfully with Oracle, and to become independent, is to read that documention.
Apart from that you should be able to find agentca.bat on your OS with one command, so, yes, I pointed you to the documentation, yes, you can find agentca.bat.
Sybrand Bakker
Senior Oracle DBA

How to recreate enterprise manager with database vault

I'm testing the Oracle database Vault option at database version 11.1.0.7 but there are some thing that does not work correct in the test. One of them is that I do not be able to recreate the enterprise manager repository. After probe several ways with database option enabled I decided to disable it. With the database vault option disabled I recreated the emanager ok but after enabled the database vault option again the database vault administrator does not browse for me:
The firefox notice me an error with resource /dva.
I hope you can help me.

when you have vault on do you get errors in the realm audit reports ?
or are you trying to create an oem repository in a vault enabled database ?

Weblogic Enterprise manager with Oracle Portal

Hi All,
Iam working on a architecture defination which is basically a B2B and B2C based web applications. I intially thought the Oracle Portal+Oracle BPM as the right combination as it gives a complete technical stack as well as we will have a well defined control over the integrations.
Since the application requires high sclability and high transactions support, wanted to choose Weblogic Enterprise manager instead of oracle AS. In this context i have following quoestions
1. Will the Oracle Portal+Oracle Discoverer+Portlets(PLSQL, JAVA) can be ported onto WEBLOGIC Enterprise manager server?
2. What is the feature of OracleASOC4J?
Request to respond on this as quicly as possible
Advance Thanks,
Sreedhar

In a RAC environment database control runs by default on a master mode,when this node goes down,EM does the same. There's a comprehensive article on metalink how to handle this:
How to manage DB Control 10.2 for RAC Database with emca
Doc ID: 395162.1
Werner

Want Deinstall Enterprise manager with all configuration

I need to have steps of deinstalling Enterprise manager dbconsole with all its configuration because i have earlier deinstalled it and installing it by the help of Universal installer but the configuration is the same old one.
Actually during restoration of my database in Test db, i do not have folder required for Enterprise manager, so i copy the folder from other database, and change different parameters in different files.
So i want to find out the way that if Oracle 10g is restored by RMAN back up , then how do we install the Enterprise manager again.
Whenever i try to drop em repositroy it is hanging

I am trying to reconfigure EM CONTROL BY using DBCA but it is still retrieving database information and following is the result of top command on dbca session .
Why it is still stuck in retrieveing database info for more than one hour.
top - 13:17:53 up 66 days, 56 min, 2 users, load average: 1.00, 1.00, 0.99
Tasks: 1 total, 0 running, 1 sleeping, 0 stopped, 0 zombie
Cpu(s): 13.0%us, 37.0%sy, 0.0%ni, 49.7%id, 0.3%wa, 0.0%hi, 0.0%si, 0.0%st
Mem: 2076988k total, 2018388k used, 58600k free, 172352k buffers
Swap: 1502036k total, 48k used, 1501988k free, 1611804k cached
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
1884 oracle 15 0 370m 61m 23m S 100 3.0 63:03.85 java
Following is the output of ps command
ps aux|grep dbca
oracle 1883 0.0 0.0 3660 1240 pts/1 S+ 12:14 0:00 /bin/sh -f ./dbca
oracle 1884 99.0 3.0 379396 63264 pts/1 Sl+ 12:14 67:44 /u01/app/oracle/product/10.2.0/db_1/jdk/jre/bin/java -Dsun.java2d.font.DisableAlgorithmicStyles=true -DORACLE_HOME=/u01/app/oracle/product/10.2.0/db_1 -DDISPLAY=localhost:10.0 -DJDBC_PROTOCOL=thin -mx128m -classpath /u01/app/oracle/product/10.2.0/db_1/jdk/jre/lib/rt.jar:/u01/app/oracle/product/10.2.0/db_1/jdk/jre/lib/i18n.jar:/u01/app/oracle/product/10.2.0/db_1/assistants/dbca/jlib/dbca.jar:/u01/app/oracle/product/10.2.0/db_1/assistants/jlib/assistantsCommon.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/ewt3.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/ewtcompat-3_3_15.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/share.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/help4.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/jewt4.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/oracle_ice5.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/kodiak.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/swingall-1_1_1.jar:/u01/app/oracle/product/10.2.0/db_1/lib/xmlparserv2.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/orai18n.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/orai18n-mapping.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/orai18n-utility.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/orai18n-collation.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/netcfg.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/ojmisc.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/oraclepki103.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/ldapjclnt10.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/opm.jar:/u01/app/oracle/product/10.2.0/db_1/jdbc/lib/classes12.zip:/u01/app/oracle/product/10.2.0/db_1/jlib/srvm.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/srvmhas.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/srvmasm.jar:/u01/app/oracle/product/10.2.0/db_1/classes:/u01/app/oracle/product/10.2.0/db_1/jlib/oemlt-10_1_0.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/emca.jar:/u01/app/oracle/product/10.2.0/db_1/sysman/jlib/emCORE.jar:/u01/app/oracle/product/10.2.0/db_1/oc4j/j2ee/home/oc4j.jar:/u01/app/oracle/product/10.2.0/db_1/oc4j/j2ee/home/db_oc4j_deploy.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/emConfigInstall.jar:/u01/app/oracle/product/10.2.0/db_1/oui/jlib/OraInstaller.jar:/u01/app/oracle/product/10.2.0/db_1/oui/jlib/OraPrereq.jar:/u01/app/oracle/product/10.2.0/db_1/inventory/prereqs/oui/OraPrereqChecks.jar:/u01/app/oracle/product/10.2.0/db_1/oui/jlib/OraPrereqChecks.jar oracle.sysman.assistants.dbca.Dbca
oracle 2022 0.0 0.0 2852 712 pts/0 S+ 13:22 0:00 grep dbca

Start EM(Enterprise Manager) with AdminServer(WebLogic) in services Windows

hi,
I have installed
WebLogic Server 1036 and Forms/Reports 11GR2
Installed WebLogic (AdminServer) to start with Windows Services!
It starts with Windows and open localhost: 7001/console 'successfully
echo off
SETLOCAL
set DOMAIN_NAME=FormsDomain
set USERDOMAIN_HOME=C:\Oracle\Middleware\user_projects\domains\FormsDomain
set SERVER_NAME=AdminServer
set PRODUCTION_MODE=true
set WLS_USER=weblogic
set WLS_PW=weblogic1
call C:\Oracle\Middleware\wlserver_10.3\server\bin\installSvc.cmd
ENDLOCAL
Everything ok so far!
However, I can not EM (Enterprise Manager) "localhost: 7001/em '
When I start the Server Admin Menu> Windows \ Start Menu \ Programs \ Oracle Classic Instance - FormsInst> Start Weblogic Server Admin
I can get 'localhost: 7001/em' usually
Can anyone give me an idea?

can someone help me?
checking the log returns this error!
####<25/09/2013 14h27min39s BRT> <Warning> <Munger> <RONEI> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <c45a6d0f723d9f21:-3dd7bb09:1415629670e:-8000-0000000000000002> <1380130059591> <BEA-2156203> <A version attribute was not found in element application in the deployment descriptor in C:\Oracle\Middleware\user_projects\applications\FormsDomain\em.ear/META-INF/application.xml. A version attribute is required, but this version of the Weblogic Server will assume that the JEE5 is used. Future versions of the Weblogic Server will reject descriptors that do not specify the JEE version.>
####<25/09/2013 14h27min39s BRT> <Error> <Deployer> <RONEI> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <c45a6d0f723d9f21:-3dd7bb09:1415629670e:-8000-0000000000000002> <1380130059671> <BEA-149205> <Failed to initialize the application 'em' due to error weblogic.management.DeploymentException: .
weblogic.management.DeploymentException:
at weblogic.application.internal.flow.BaseLifecycleFlow$CreateListenerAction.run(BaseLifecycleFlow.java:176)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.application.internal.flow.BaseLifecycleFlow$BaseAction.invoke(BaseLifecycleFlow.java:104)
at weblogic.application.internal.flow.HeadLifecycleFlow.createListener(HeadLifecycleFlow.java:117)
at weblogic.application.internal.flow.HeadLifecycleFlow.createListener(HeadLifecycleFlow.java:103)
at weblogic.application.internal.flow.HeadLifecycleFlow.createListeners(HeadLifecycleFlow.java:175)
at weblogic.application.internal.flow.HeadLifecycleFlow.prepare(HeadLifecycleFlow.java:281)
at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:648)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:59)
at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:144)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:39)
at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:191)
at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:21)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused By: java.lang.ClassNotFoundException: oracle.security.jps.wls.listeners.JpsApplicationLifecycleListener
at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:297)
at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:270)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:179)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:247)
at weblogic.application.internal.flow.BaseLifecycleFlow$CreateListenerAction.run(BaseLifecycleFlow.java:140)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.application.internal.flow.BaseLifecycleFlow$BaseAction.invoke(BaseLifecycleFlow.java:108)
at weblogic.application.internal.flow.HeadLifecycleFlow.createListener(HeadLifecycleFlow.java:117)
at weblogic.application.internal.flow.HeadLifecycleFlow.createListener(HeadLifecycleFlow.java:103)
at weblogic.application.internal.flow.HeadLifecycleFlow.createListeners(HeadLifecycleFlow.java:175)
at weblogic.application.internal.flow.HeadLifecycleFlow.prepare(HeadLifecycleFlow.java:281)
at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:649)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:59)
at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:144)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:40)
at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:191)
at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:22)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:166)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

Automatically starting Oracle Enterprise Manager with chkconfig

Folks,
While Oracle Linux 6 is out (6.2 actually), Oracle has yet to get everything 'working out of the box' with 6.2. Right now (June 2012) you've got to download patches from Oracle, the new way to start services in Linux 6, upstart, doesn't work with all Oracle features yet, etc. Update: You can still use chkconfig with OL6.
Because of the above, I've been using Oracle Linux 5.8. Linux 5 uses something called chkconfig to register services. You first need to put a script in the right directory: /etc/rc.d/init.d. Linux looks in this directory for scripts and runs those scripts with either a start or stop after them depending on if the system is coming up or going down. Technically this happens every time you change your runlevel (google Unix runlevels for more info), not just when the system goes up or down.
Here's a script that you can put in /etc/rc.d/init.d. I named mine oracleEM:
[root@localhost ~]# cd /etc/rc.d/init.d
[root@localhost init.d]# vi oracleEM
Enter i to enter insert mode and then enter the below (or just copy and paste it)
*#!/bin/sh*
*#chkconfig: 2345 80 05*
*#description: Oracle Enterprise Manager*
ORA_HOME=/u01/app/oracle/product/11.2.0/dbhome_1
ORA_OWNER=oracle
ORA_SID=orcl
*# We're checking to see if ps returns 1 or 2 results for pmon_orcl*
*# If there are two, Oracle is running, one we are just seeing our grep*
ORACLE_STATUS=$(ps -eaf | grep pmon_$ORA_SID | wc -l)
*if [ ! -f $ORA_HOME/bin/emctl ]*
then
echo "Enterprise Manager startup: cannot start"
exit
fi
case "$1" in
*"start")*
*if [ $ORACLE_STATUS -lt 2 ]*
then
echo "Waiting for Oracle instance $ORA_SID to start before starting Enterprise Manager"
fi
*while [ $ORACLE_STATUS -lt 2 ];do*
echo "Waiting...."
sleep 5
ORACLE_STATUS=$(ps -eaf | grep pmon_$ORA_SID | wc -l)
done
su - $ORA_OWNER -c "$ORA_HOME/bin/emctl start dbconsole"
*"stop")*
su - $ORA_OWNER -c "$ORA_HOME/bin/emctl stop dbconsole"
esac
Press the Esc key to leave insert mode, then type *:wq* to write the file and quit.
We'll need to make the script executable, so we need to run the following command:
[root@localhost init.d]# *chmod +x oracleEM*
Finally we need to register the oracleEM script with Linux using the chkconfig command:
[root@localhost init.d]# *chkconfig --add oracleEM*
Now Enterprise Manager will start up automatically when you start your system, but only after Oracle has started.
Rich
Edited by: RichS on Jun 9, 2012 1:00 AM

The script you are using will not work for RHEL or Oracle Linux since it is incorrect and missing important coding.
You can probably fix the script by removing the dash (-) from the su command and adding the lockfile that is required for RHEL to process the stop routine at system shutdown. The dash will reset the shell environment and the startup won't work. You should also start it in the background in order not to prolong the system startup more then necessary.
lockfile=/var/lock/subsys/oracleEM
start)
   su $ORA_OWNER -c "$ORA_HOME/bin/emctl start dbconsole &" &>/dev/null
   touch $lockfile
stop)
   su $ORA_OWNER -c "$ORA_HOME/bin/emctl stop dbconsole"
   rm -rf $lockfile
...You do not need to start your Oracle instance before starting dbconsole. So there is no need for the "sleep" routine. You can start the Oracle Database control console even when the instance is down:
For instance:
<pre>
[oracle@vm005 ~]$ ps -ef | grep pmon
oracle 17749 10343 0 22:48 pts/3 00:00:00 grep pmon
$ emctl start dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
https://vm005.example.com:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 11g Database Control ....... started.
</pre>

Using dcmctl and enterprise manager with OracleAS 10.1.2.0.2

Hi
I know that in OracleAS 9.0.2 there were problems when you tried to use dcmctl and Enterprise Manager at the same time. Does OracleAS 10.1.2.0.2 has the same problem.

hello,
somewhere (i really don't remember where, but it was in the oracle documentation) i'm sure i read that already in 9.0.4 you could use dcmctl when enterprise manager was up. but i've never experienced it and i prefer not to try!!!
fabrizio

Problem In Enterprise manager with Oracle 10g AS 10.1.3.1.0

dear all,
I installed Oracle Application server 10g (10.1.3.1.0) on REDHAT Enterprise Linux 4 AS Update 4, so evrything done throu installation , but after installing when i try to open EM with browser http://localhost:7778/em not working and appear mesage (The Request URL/em was not found on this server) so i tried with ip-addressand with FQDN but not working, opmnctl service all running successfuy !!! (OC4J ,HTTP all working done - i made restat to all opmn services and the same result!!!!)
how can i solve this problem????
Thanks

Thanks Dear Jacco,
but i installed only OC4j and HTTP components , so control is working opmnctl working every think and components working good , but the strange in this case when i tried to fine emctl file but its not found !!!! (emctl start iasconsole) in this version of Oracle 10g AS .
what u think?

How to define a new user in Enterprise manager with Specific access rights?

Hi,
I want to create a new user in OEMS 11g who should be able to access only the scheduler jobs section.
How can this be acheived?

You can create new administrators via the Setup --> Administrators page
You can grant certain access rights to targets, you can not however grant priv to only access the job system
Take a look at http://download.oracle.com/docs/cd/E11857_01/em.111/e14586/security3.htm#sthref235
Regards
Rob
http://oemgc.wordpress.com

Application Sever - Enterprise Manager

I have forgot the password for Enterprise. Is there any way login into the enterprise manager with some system default userid and password. Can you inform what is the default userid and password for enterprise manager.

Depends on platform. For UNIX, use
ORACLE_HOME/bin/emctl set password new_password
For windows, its explained in the release notes addendum:
14.5 Resetting the Administrator Password
The Enterprise Manager Web Site will enforce use of the current Administrator (ias_admin) password when you log in to Enterprise Manager, stop
the Enterprise Manager Service, or change the ias_admin password. If you have forgotten your ias_admin password then you must reset it using
the following procedure while you are logged on to your PC as the person who installed Oracle9iAS:
1.Edit the following file and locate the line that defines the credentials property for use the ias_admin user:
%ORACLE_HOME%/sysman/j2ee/config/jazn-data.xml
The following example shows the section of jazn-data.xml with the credentials entry in boldface type:
<realm>
<name>enterprise-manager</name>
<users>
<user>
<name>ias_admin</name>
<credentials>rJqp85BkhFwAyw9ddl0PnFlUBVaWzbfT</credentials>
</user>
2.Remove the entire line that contains the <credentials> property from jazn-data.xml.
3.Enter the following command from DOS Command window:
%ORACLE_HOME%\bin\emctl set password reset <new password>
4.Restart your PC.
After the restart, the Enterprise Manager Web Site will be using your new Administrator (ias_admin) password.

Enterprise Manager on OracleDB-PersonalEdition

Hi,
I have an application which runs on Oracle DB 12c - Personal edition and Weblogic Server 12c . We would like to handle and manipulate logging levels using Enterprise Manager12c. Does any one know if we can install enterprise manager with Oracle DB12c-Personal edition or is there another EM package which could be configured to work along with Weblogic Server?
-Thanks!

Hi,
Using weblogic admin console or Fusion middleware control that comes with Weblogic, you can only do the administrative tasks for Weblogic and other Fusion middleware components , but not for Database.
Thanks,
Sharmela

Error executing Introscope Enterprise Manager

Hello,
I am configuring the Wily Introscope 7.1 as a step for configure the SMD, and I have a problem starting the Enterprise Manager with the command: <i>nohup ./Introscope_Enterprise_Manager&</i>
It append an output to 'nohup.out', which display the following error:
<i>java.lang.InternalError: Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable.</i>
I have done every step described in the "Introscope Version 7.1Installation Guide For SAP".
What could be the problem?
Regards,
MY

Hi Miguel,
I see two explanations:
(1) The DISPLAY environment variable is not correctly defined on the remote server; and / or
(2) The computer from which the rsh command is executed does not allow the display of a "frame" from another host.
In the first case, one could try on the remote computer:
set DISPLAY=localComputer:0
export DISPLAY.
(depends on the shell may be
setenv DISPLAY systemname:0.0
where systemname is the name of your workstation, or some remote system where you want the display directed to).
In the second case, one could try on the local computer:
xhost+
if it helpful reward points are appreciated

Wily Enterprise Manager fails to start up

Hi Gurus:
While starting up Wily EM I get the below. Can anyone point me in the right direction with this?
======================================================================
Running Enterprise Manager with IHOME=.
Running Enterprise Manager with JAVAPATH=/usr/sap/ccms/wilyintroscope/jre
java version "1.5.0"
Java(TM) 2 Runtime Environment, Standard Edition (build pap64dev-20060511 (SR2))
IBM J9 VM (build 2.3, J2RE 1.5.0 IBM J9 2.3 AIX ppc64-64 j9vmap6423-20060504 (JIT enabled)
J9VM - 20060501_06428_BHdSMr
JIT - 20060428_1800_r8
GC - 20060501_AA)
JCL - 20060511a
Introscope Enterprise Manager failed to start because:
An error occurred while trying to start Isengard.
Press 'Enter' to acknowledge....
====================================================================
Thank you v much, Viji

Hi David:
It worked fine previously. This has been installed a while ago ( a couple of years). We did have a couple of problems recently with corrupt data files. Deleting the concerned datafile and restarting Wily solved the problem. However I haven't a clue on how to get this going.
thanks , Viji

Issue with Enterprise Manager 11g

When I start the db console I am given the message
Enterprise Manager is not able to connect to the database instance, The state of the components are listed below.
All components are listed with green arrows indicating they are up
After reading a few posts here I have attempted to use EMCA to drop and re create the repository and settings
I have run the command 'emca -deconfig dbcontrol db -repos drop' to try and do this but it just hangs
Looking in the logs I can see the follow (only the last few lines added to keep it short)
emca_2011_08_05_14_17_29 -
CONFIG: Setting param: REP_DB_RUNNING_HOST value: RangePlanTest.gooutdoors.local
Aug 5, 2011 2:17:56 PM oracle.sysman.emcp.ParamsManager getRepDbPort
CONFIG: Listener Port: 1521
Aug 5, 2011 2:17:56 PM oracle.sysman.emcp.util.GeneralUtil isLocalConnectionRequired
CONFIG: isLocalConnectionRequired: true
Aug 5, 2011 2:17:56 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: isLocalConnectionRequired: true. Connecting to database instance locally.
Aug 5, 2011 2:17:56 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine connecting with SID: godw, oracleHome: C:\app\server\product\11.2.0\dbhome_2, and user: SYSMAN
Aug 5, 2011 2:17:57 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine created successfully and connected
Aug 5, 2011 2:17:57 PM oracle.sysman.emcp.ParamsManager checkListenerStatusForDBControl
CONFIG: Passed listener validation check.Listener is up and running.
Aug 5, 2011 2:17:57 PM oracle.sysman.emcp.EMReposConfig invoke
INFO: Dropping the EM repository (this may take a while) ...
Aug 5, 2011 2:17:57 PM oracle.sysman.emcp.util.PlatformInterface isInView
CONFIG: IN_VIEW marker not instantiated in C:\app\server\product\11.2.0\dbhome_2\sysman\config\emca.properties
Aug 5, 2011 2:17:57 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Aug 5, 2011 2:17:57 PM oracle.sysman.emcp.util.PlatformInterface getEnvProps
CONFIG: Returning env array from cache
Aug 5, 2011 2:17:57 PM oracle.sysman.emcp.util.PlatformInterface getSortedEnvArray
+CONFIG: New Env List: [ALLUSERSPROFILE=C:\ProgramData, APPDATA=C:\Users\server\AppData\Roaming, CLASSPATH=C:\app\server\product\11.2.0\dbhome_2\jlib\emca.jar;C:\app\server\product\11.2.0\dbhome_2\jlib\srvm.jar;C:\app\server\product\11.2.0\dbhome_2\jlib\srvmasm.jar;C:\app\server\product\11.2.0\dbhome_2\jlib\cvu.jar;C:\app\server\product\11.2.0\dbhome_2\jlib\emConfigInstall.jar;C:\app\server\product\11.2.0\dbhome_2\jlib\ldapjclnt11.jar;C:\app\server\product\11.2.0\dbhome_2\jlib\ldap.jar;C:\app\server\product\11.2.0\dbhome_2\jlib\share.jar;C:\app\server\product\11.2.0\dbhome_2\jlib\srvmhas.jar;C:\app\server\product\11.2.0\dbhome_2\jlib\netcfg.jar;C:\app\server\product\11.2.0\dbhome_2\jlib\http_client.jar;C:\app\server\product\11.2.0\dbhome_2\lib\http_client.jar;C:\app\server\product\11.2.0\dbhome_2\lib\xmlparserv2.jar;C:\app\server\product\11.2.0\dbhome_2\assistants\jlib\assistantsCommon.jar;C:\app\server\product\11.2.0\dbhome_2\sysman\jlib\emCORE.jar;C:\app\server\product\11.2.0\dbhome_2\sysman\jlib\emagentSDK.jar;C:\app\server\product\11.2.0\dbhome_2\oui\jlib\OraInstaller.jar;C:\app\server\product\11.2.0\dbhome_2\oui\jlib\OraPrereq.jar;C:\app\server\product\11.2.0\dbhome_2\inventory\prereqs\oui\OraPrereqChecks.jar;C:\app\server\product\11.2.0\dbhome_2\oui\jlib\OraPrereqChecks.jar;, COMMONPROGRAMFILES=C:\Program Files\Common Files, COMMONPROGRAMFILES(X86)=C:\Program Files (x86)\Common Files, COMMONPROGRAMW6432=C:\Program Files\Common Files, COMPUTERNAME=RANGEPLANTEST, COMSPEC=C:\Windows\system32\cmd.exe, EMCA_JAR=C:\app\server\product\11.2.0\dbhome_2\jlib\emca.jar, FP_NO_HOST_CHECK=NO, HOMEDRIVE=Z:, HOMEPATH=\, HOMESHARE=\\kryten\gooutdoors\users\server, JRE_JAVA=C:\app\server\product\11.2.0\dbhome_2\jdk\jre\bin\java, LIB_DIR=C:\app\server\product\11.2.0\dbhome_2\jlib, LOCALAPPDATA=C:\Users\server\AppData\Local, LOGONSERVER=\\RIMMER, NUMBER_OF_PROCESSORS=4, OH=C:\app\server\product\11.2.0\dbhome_2, ORACLE_HOME=C:\app\server\product\11.2.0\dbhome_2, ORACLE_SID=godw, OS=Windows_NT, PATH=C:\app\server\product\11.2.0\dbhome_2\bin;C:\app\server\product\11.2.0\dbhome_2\bin;C:\Program Files\HP\NCU;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;c:\Program Files (x86)\Microsoft SQL Server\90\Tools\binn\, PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC, PROCESSOR_ARCHITECTURE=AMD64, PROCESSOR_IDENTIFIER=Intel64 Family 15 Model 4 Stepping 1, GenuineIntel, PROCESSOR_LEVEL=15, PROCESSOR_REVISION=0401, PROGRAMDATA=C:\ProgramData, PROGRAMFILES=C:\Program Files, PROGRAMFILES(X86)=C:\Program Files (x86), PROGRAMW6432=C:\Program Files, PROMPT=$P$G, PSMODULEPATH=C:\Windows\system32\WindowsPowerShell\v1.0\Modules\, PUBLIC=C:\Users\Public, SESSIONNAME=Console, SYSTEMDRIVE=C:, SYSTEMROOT=C:\Windows, TEMP=C:\Users\server\AppData\Local\Temp\1, TMP=C:\Users\server\AppData\Local\Temp\1, USERDNSDOMAIN=GOOUTDOORS.LOCAL, USERDOMAIN=GOOUTDOORS, USERNAME=server, USERPROFILE=C:\Users\server, WINDIR=C:\Windows, WINDOWS_TRACING_FLAGS=3, WINDOWS_TRACING_LOGFILE=C:\BVTBin\Tests\installpackage\csilogfile.log]+
Aug 5, 2011 2:17:57 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Starting execution: CMD /C C:\app\server\product\11.2.0\dbhome_2\sysman\admin\emdrep\bin\RepManager.bat -connect (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=RangePlanTest.gooutdoors.local)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=GODW))) -repos_user SYSMAN -action drop -verbose -output_file C:\app\server\cfgtoollogs\emca\GODW\emca_repos_drop_2011_08_05_14_17_57.log
emca_repos_drop_2011_08_05_14_17_57 -
SQL> declare
2 l_username varchar2(30);
3 l_sid number;
4 l_serial number;
5 err number;
6 c number;
7 l_job_process_count NUMBER ;
8 TYPE TBSP_ARRAY IS TABLE OF VARCHAR2(64) INDEX BY BINARY_INTEGER ;
9 l_tablespaces TBSP_ARRAY;
10
11
12      PROCEDURE set_job_process_count(p_count IN NUMBER)
13      IS
14      BEGIN
15      --scope=memory so it will be reset on instance startup
16      -- SID=* to take care of RAC
17      IF p_count >=0
18      THEN
19      EXECUTE IMMEDIATE 'ALTER SYSTEM SET job_queue_processes='
20                ||p_count||' SID=''*''' ;
21      END IF ;
22      EXCEPTION WHEN OTHERS THEN NULL ;
23      END set_job_process_count ;
24
25      FUNCTION get_job_process_count
26      RETURN NUMBER
27      IS
28      l_value NUMBER ;
29      BEGIN
30      SELECT value
31      INTO l_value
32      FROM v$parameter
33      WHERE name = 'job_queue_processes' ;
34      RETURN(l_value) ;
35      EXCEPTION
36      WHEN OTHERS THEN
37      RETURN(10) ;
38      END get_job_process_count ;
39 begin
40      -- Now, drop the SYSMAN user
41      c := 0;
42      -- validate user exists
43      BEGIN
44      SELECT username
45      INTO l_username
46      FROM dba_users
47      WHERE username = upper('&EM_REPOS_USER') ;
48      EXECUTE IMMEDIATE 'ALTER USER '||l_username||' ACCOUNT LOCK' ;
49      EXCEPTION
50      WHEN NO_DATA_FOUND THEN RETURN ;
51      END ;
52      -- reduce job_queue_processes to zero
53      l_job_process_count := get_job_process_count ;
54      set_job_process_count(0) ;
55      begin
56      loop
57      BEGIN
58      LOOP
59           BEGIN
60           FOR crec in (SELECT sid, serial#
61                     FROM gv$session
62                     WHERE (upper(username)=l_username OR
63                          upper(schemaname)=l_username)
64                     AND status != 'KILLED')
65           LOOP
66           BEGIN
67                EXECUTE IMMEDIATE 'ALTER SYSTEM KILL SESSION IMMEDIATE ''' ||
68                          crec.sid || ',' || crec.serial# || '''';
69           EXCEPTION
70                WHEN OTHERS THEN
71                err := SQLCODE;
72                IF err != -30 THEN
73                     EXIT;
74                END IF;
75           END;
76           commit;
77           END LOOP;
78           EXCEPTION
79           WHEN OTHERS THEN
80           err := SQLCODE;
81           IF err != -30 THEN
82                EXIT;
83           END IF;
84           END;
85           IF SQL%NOTFOUND THEN
86           EXIT;
87           END IF;
88           commit;
89      END LOOP;
90
91      -- >> START - Capturing the Tablespaces to be dropped
92
93      for crec in (SELECT DISTINCT TABLESPACE_NAME FROM all_tables
94                WHERE owner = '&EM_REPOS_USER' AND table_name IN ('MGMT_TARGETS','MGMT_JOB_PARAMETER','MGMT_AUDIT_DATA')
95                MINUS
96                SELECT DISTINCT TABLESPACE_NAME FROM all_tables
97                WHERE owner != '&EM_REPOS_USER')
98           LOOP
99           l_tablespaces(l_tablespaces.count) := crec.tablespace_name;
100           END LOOP;
101
102      -- >> END - Capturing the Tablespaces to be dropped
103
104      execute immediate 'drop user ' || l_username || ' cascade';
105      set_job_process_count(l_job_process_count) ;
106
107      -- >> START - Dropping the Tablespaces
108      BEGIN
109           IF (l_tablespaces.count > 0) THEN
110           FOR i IN l_tablespaces.FIRST .. l_tablespaces.LAST
111                LOOP
112                BEGIN
113                execute immediate 'drop tablespace ' || l_tablespaces(i) || ' including contents';
114                exception
115                when NO_DATA_FOUND then
116                DBMS_OUTPUT.PUT_LINE('DropRep: Tablespaces for REPOS USER do not exist');
117                WHEN OTHERS THEN
118                err := SQLCODE;
119                DBMS_OUTPUT.PUT_LINE('DropRep: Error ' || SQLCODE || ' received dropping tablespace ' || l_tablespaces(i));
120                END;
121                END LOOP;
122           ELSE
123           DBMS_OUTPUT.PUT_LINE('NO TABLESPACES Exist');
124           END IF;
125      END;
126      -- >> END - Dropping the Tablespaces
127
128      exit;
129
130      EXCEPTION
131           WHEN NO_DATA_FOUND THEN
132           exit;
133           WHEN OTHERS THEN
134           err := SQLCODE;
135           IF err = -1918 THEN
136           EXIT;
137           ELSE
138           IF err = -1940 THEN
139                NULL;
140           ELSE
141                DBMS_OUTPUT.PUT_LINE('not 1940 err' || err);
142                c := c+1;
143                IF c > 50 THEN
144                RAISE;
145                END IF;
146           END IF;
147           END IF;
148      END;
149      end loop;
150      end;
151      commit;
152 EXCEPTION
153 WHEN OTHERS THEN
154 set_job_process_count(l_job_process_count) ;
155 RAISE ;
156 end;
157 /
old 47:     WHERE username = upper('&EM_REPOS_USER') ;
new 47:     WHERE username = upper('SYSMAN') ;
old 94:          WHERE owner = '&EM_REPOS_USER' AND table_name IN ('MGMT_TARGETS','MGMT_JOB_PARAMETER','MGMT_AUDIT_DATA')
new 94:          WHERE owner = 'SYSMAN' AND table_name IN ('MGMT_TARGETS','MGMT_JOB_PARAMETER','MGMT_AUDIT_DATA')
old 97:          WHERE owner != '&EM_REPOS_USER')
new 97:          WHERE owner != 'SYSMAN')
Sorry for the long post but any help would be great

As a bit of further info I noticed these warnings when running the command - emca -deconfig dbconrtol db -repos drop
Do you wish to continue? [yes(Y)/no(N)]: Y
Aug 5, 2011 4:26:26 PM oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at C:\app\server\cfgtoollogs\emca\GODW\emca_2011_08_05_16_25_58.log.
Aug 5, 2011 4:26:27 PM oracle.sysman.emcp.util.DBControlUtil stopOMS
INFO: Stopping Database Control (this may take a while) ...
Aug 5, 2011 4:26:28 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
WARNING: Error executing CMD /C C:\app\server\product\11.2.0\dbhome_2\bin\nmesrvops.exe delete OracleDBConsoleGODW
Aug 5, 2011 4:26:32 PM oracle.sysman.emcp.EMReposConfig invoke
WARNING: Unable to remove DBMS jobs.
Aug 5, 2011 4:26:33 PM oracle.sysman.emcp.EMReposConfig invoke
INFO: Dropping the EM repository (this may take a while) ...

Enterprise Manager with IPC Protocol

Similar Messages

Maybe you are looking for