Enterprise Mode site list and manual override

I have a small question / issue when using Enterprise Mode.
We have enabled it using GPO by specifying both a site list and the Enable settings for manual override. This works fine but I don't know how to reset the manual override if somebody flicks the EM mode for a specific site.
I just want to tell IE to forget all manual overrides and apply the sitelist as delivered.
I tried to look in the registry, in the %AppData% fodler, even cleared the IE cache but IE still remembers the user overrides.
Any help will be really appreciated.
Thanks, Nic.

Hi Nic,
As the official documents said, this registry key [HKEY_LOCAL_MACHINE\SOFTWARE\ Policies\Microsoft\Internet Explorer\Main\EnterpriseMode] “Enable” = “” | {URL:port} can also be used to collect manual overrides. By configuring the “Enable” key with a
valid URL and port, Internet Explorer will initiate a simple POST to the supplied address whenever a user enables or disables Enterprise Mode. This effectively helps customers crowd-source lists of compatible Web apps from their own users, which may decrease
triage and testing costs.
Approximately 65 seconds after Internet Explorer 11 starts, it looks for a properly formatted site list. If a new site list is found, with a different version number than the active list, Internet Explorer 11 loads and uses the newer version.
This is designed by default, and we cannot reset the by preventing the changes.
We may try to logon script to re-deploy the original site list to reset the site list settings.
Kate Li
TechNet Community Support

Similar Messages

Enterprise mode site list manager and document mode

Hello,
I'm just wondering, if I select IE5 doc mode in enterprise mode site list manager, will I have doc mode IE5 running on IE8 high fidelity emulation (enterprise mode) or IE 5 doc mode running on IE11 ?
Regards,
Michel

Hi Michel,
It should be IE 5 document mode on IE 11.
As you could see from the enterprise mode site list manager, the listed choice is:
If you select Enterprise Mode, it should be IE8 high fidelity emulation only, the manager won't let you choose the document mode under enterprise mode.
Best regards
Michael Shao
TechNet Community Support

IE 11 Enterprise Mode Sites List - Must Force IE 8 Emulation to Default or Disaster

I've gone through about 100 postings thus far and not sure what I'm missing.
I have a scenario where 98% of the sites internal are IE8 compatible and in some cases IE7. I was hoping their was an option to default IE 11 to IE 8 Emulation mode but I cannot get it working. I'm having to add each site manually and set it
to IE 8 mode when in fact I have 1000 sites that are IE 8 and 3 that need IE 11. There is no common domain suffix.
Am I just missing something simple? I have the latest Site Configuration Tool, I've edited manually but by default if you add nothing it defaults to Edge Mode or IE 11. I have to add the site manually as an exclude.
I've been reading up on XML, looking for a code solution or hack. All workstations and Citrix must be upgraded to IE 11 and Enterprise Mode is the only option.
Is there any possible way to force IE 11 to emulate IE 8 mode by default. Something I can set in the XML file that reverses the default. So, in other words I don't want to add 1000 sites of IE 8 mode but 3 to use IE 11.
I just cannot wrap my head around there not being this option.
Example: The two sites below run in IE 8 mode. I want everything to run in IE 8 mode and not have to add but only add for any other exclusion. Otherwise, this is going to be a disaster of a project.
<rules version="2">
<emie>
<domain exclude="false">www.thewindowsclub.com</domain>
<domain exclude="false">www.howtogeek.com</domain>
</emie>
</rules>

Hi Brian,
Perhaps I have misunderstood you.....
you should be only adding intranet or trusted sites domains to the EM List. The rendering/compatibility of public websites is maintained by developers or they have asked MS to put their sites into compatibility mode until they have updated their websites
to not use modern techniques...
for internet domains
the site may already be in the MSCVL (MS Compatibility View List)... Tools>Compatibility View Lists, check "Include updated website lists from MS".
If you see an internet site that does not render correctly in the edge mode of the browser consumers can report it to MS from the Tools>Report Problem Websites.
If you are using EM for internet zone sites (publicly accessible), then you are using it for the wrong purpose....(or you have not checked "Include updated website lists from MS".)
for intranet and trusted sites domains, ie. where on corporate networks you want a business partners domain (eg. Bloomberg.com) to be able to link to or host content from your intranet domain. eg. you may have a portfolio management system (web based)
that uses Bloomberg data feeds or content from one of their services, like asset valuation)....
The system administrators are bound to have a listing of their intranet assets which you can either import or manually add to the EMList (or using the EMList Manager).
Rob^_^

Error: "We're having a problem opening this location on file explorer. Add this website to your trusted sites list and try again"

Hello,
When i try to open document library from SharePoint Production portal then it throws the specified error. However, when i open document library from SharePoint Development portal then it opens it in file explorer quite easily.
Production portal is on https whereas development portal is on http. Also, UAG has been configured on production portal.
Any idea where it's getting stuck up? Surely, this is not a browser issue on Windows 7 as it's opening the development portal's document library on the same machine.
I've also done following things:
- Configured Desktop Experience on production environment
- Installed the hotfix for Windows 7
Regards,
Sohaib
Sohaib Khan

Hello Sohaib.
Here is the list of causes defined here.Hope it helps you
The cause and the resolution methods are the following:
Cause: There is a missing Root site collection...
Resolution: Check and ensure, that the “Managed Paths” are not changed in the web Application’s page, there is a (root) explicit for
this web application and there is a working Root site collection.
If for any reason this is not the case in your environment, you may try the following:
- Apply (if not already) the following Hotfix to one of those clients:
Error when you open a SharePoint Document Library in Windows Explorer or map a network drive to the library after you install Internet Explorer 10 in Windows 7 or Windows Server 2008 R2
http://support.microsoft.com/kb/2846960
Then, try to delete the cache of the IE browser before reproducing the issue. Check the result..
- Try to temporarily disable the Antivirus and test again.
- Check if you have installed the Desktop Experience feature on the SPS13 server.
- Check if you face this behavior with all users, Or only with some specific ones, Or with all different client OSes..
Otherwise you will need to collect the logs to further analyze...
http://blogs.msdn.com/b/george_bethanis/archive/2013/11/04/sps13-quot-open-with-explorer-quot-random-error-quot-we-re-having-a-problem-opening-this-location-in-file-explorer-add-this-web-site-to-your-trusted-sites-list-and-try-again-quot.aspx
Please remember to click 'Mark as Answer' on the answer if it helps you

Safari top site list and PubSub client list override

After finding the PubSub client.plist was causing my system to go out and update some RSS feeds I had not been into in years - found I could delete the list and the file was recreated when I went into Mail or Safari.
Mail created the clean list I wanted but when I went into Safari it added the old sites to the client list.
Found that the TopSites plist in Safari folder had the rss sites in it -- so I went to top sites screen and removed all of the top sites (I don't use it) then delete the client list in PubSub and went on-line etc.
At this point client list is still clean and no bogus feeds (also in pubsub) coming in.
Assume if it was reported in SnowLeopard assume it would have been fixed - if it wasn't reported - may be causing slow downs in later versions so I reported it to Apple in Feedback.
Has anyone else had this problem and found other places to clean up?
(Can't get software on media so can't update -- and based on download problems seen here bet a lot of people would rather get the media - and I do tell this to Apple in every feedback)

Hi Nic,
As the official documents said, this registry key [HKEY_LOCAL_MACHINE\SOFTWARE\ Policies\Microsoft\Internet Explorer\Main\EnterpriseMode] “Enable” = “” | {URL:port} can also be used to collect manual overrides. By configuring the “Enable” key with a
valid URL and port, Internet Explorer will initiate a simple POST to the supplied address whenever a user enables or disables Enterprise Mode. This effectively helps customers crowd-source lists of compatible Web apps from their own users, which may decrease
triage and testing costs.
Approximately 65 seconds after Internet Explorer 11 starts, it looks for a properly formatted site list. If a new site list is found, with a different version number than the active list, Internet Explorer 11 loads and uses the newer version.
This is designed by default, and we cannot reset the by preventing the changes.
We may try to logon script to re-deploy the original site list to reset the site list settings.
Kate Li
TechNet Community Support

IE 8 Trusted sites list and Group Policy

Hi all
I have a problem deploying some IE trusted sites to all our users.
I have previously been able to do this by editing the Local Group Policy, but am finding that what ZCM is telling me now, doesn't make sense. Here's what I'm doing when I edit the policy:
GP Helper in the ZCM console brings up the Group Policy window, then I proceed as follows:
Local Computer Policy / User Configuration / Internet Explorer Maintenance / Security / Security Zones and Content Ratings, click Continue to the prompt about Enhanced Security Configuration, then click Modify Settings.
When I go to the Security tab and open Trusted Sites, the sites I entered are no longer listed (the list is empty), BUT if I try to add the sites back in, I am told that "This Site is already in the Trusted Sites Zone".
If I log on as a user that has this policy applied, the sites are not in the Trusted Sites list.
I really don't want to be in position where I have to do this through a bundle, I figure that's what policy is for! I'm also concerned that if this part of policy is showing some weirdness, maybe other parts of my policy are no longer being applied properly too.
Just a bit stumped at the moment. Has anyone else seen this issue, or has any suggestions for me?

Spearse,
I just tried this with IE7, and it worked as advertised... I would
suggest you look at the logs to see if there are any errors
Shaun Pond

Report on Sites, Lists and Libraries with Unique Permissions

I would like to get a report on Sites, Pages, Lists, Libraries, Items and Documents under a Site Collection having Unique Permissions. What is the best way to accomplish that ?

Finally catch your meaning. In SharePoint 2010, uniquely secured objects can be displayed on the permission settings page of the parent object(see my screenshots here
http://cid-6f40fb61d28cf147.office.live.com/view.aspx/Technology/UniquePermission.docx
). And as you may already know, it seems only show inheritance broken within a site. I found it does not show unique permission of sub sites in a site collection.
You may want something like a Broken Inheritance Report Jobs in SharePoint Administration Toolkit for SharePoint 2007 (http://blogs.msdn.com/b/sharepoint/archive/2009/08/27/announcing-the-fourth-release-of-the-microsoft-sharepoint-administration-toolkit.aspx
). However, I had not found it in SharePoint Administration toolkit for SharePoint 2010.
If you are currently in need of this kind of reports, you may try third party tools such as that from the Lightingtools(I am not familiar with it and don’t know
if it will meet your requirement).
Or you can back up the content database from and restore it to test environment to query. With the help of SQL Server profiler, I found that the stored procedure proc_SecChangeToUniqueScope(http://msdn.microsoft.com/en-us/library/dd358095(PROT.13).aspx
) is called when you break permission inheritance. You can find more information around this store procedure by searching:
http://www.bing.com/search?q=site%3Amsdn.microsoft.com+proc_SecChangeToUniqueScope
And you can make use of database comparison tools such as that from the visual studio 2010 premium/ultimate to compare the content database before and after the site
permission inheritance is broken to learn what tables to query (of cause, you should do all this in test environment).

Some bookmarks "gray out" and will neither work nor can they be deleted. FF 4.0, Win XP SP3. Have tried safe mode, restart, reboot, and manual deletion in the bookmarks organizer. None of these work.

Only certain sites, such as CNN, will show the site name but not the URL in the Bookmarks Organizer. Sometimes they will appear on a restart. I noticed this in FF 3.16 and thought that FF4.0 might cure it but it hasn't. I've tried disabling hardware acceleration, all plugins, and the advice on the Firefox help site under "bookmarks don't work." I'm typing this from a different computer with essentially the same settings, OS, etc. and this does not show a problem on this machine. I've been through Task Manager, Processes and FF does not appear after shutdown.

Re: Audigy2 ZS Platinum -Win XP SP2 - card not detectedF neur0n,
Installation problems can have so many causes...but my first question is did you cancel installation of Windows drivers after it found the soundcard as new hardware? Second, and by way of example, recently the IT guy at work setup a new WinXP PC for me including an A2ZS card. But he installed the default Windows drivers for the soundcard. In Device Manager, I uninstalled these drivers and rebooted. Windows found new hardware. I cancelled the offer of Windows drivers and proceeded to install drivers, Creative software apps, and Mediasource from the original installation CD. Everything works fine now. Possibly you've done something similar to this procedure already, but If you decide to try it again, uninstall any software apps first.
Here is a link to a thread covering some FAQ on the A2ZS:
http://forums.creative.com/creativel...hread.id=46767

How to config IE11 to display all websites in enterprise mode

Dear Experts,
Is there anyway to config IE11 to display all websites in Enterprise mode?
Like "display all websites in compatibility view" in IE10
Thanks and Regards,
Phenom

Hi,
We cannot set it for all websites, but can add a site list with all you would like to turn on the Enterprise mode.
Turn on Enterprise Mode and use a site list
http://msdn.microsoft.com/en-us/library/dn640699.aspx
You can use Enterprise Mode Site List Manager tool to edit your site list:
Enterprise Mode Site List Manager
http://www.microsoft.com/en-us/download/details.aspx?id=42501
Edit the Enterprise Mode site list using the Enterprise Mode Site List Manager
http://msdn.microsoft.com/en-us/library/dn640691.aspx
Thanks for your understanding.
Kate Li
TechNet Community Support

How to turn on IE 11 enterprise mode in Windows 8.1 Enterprise?

I am trying to turn on Enterprise mode in IE11 on my windows 8.1 entrerprise.
Many thanks
Sepp
Thanks Sepp

Hi Don,
I installed w8.1 Enterprise Update 1
and sorry the link you supplied does not work
Sorry, the IE blog seems to be down at the moment :(
http://technet.microsoft.com/en-US/ie
http://technet.microsoft.com/en-us/library/dn640687.aspx
From the blog post:
To learn more about Enterprise Mode
To learn more about Enterprise Mode for Internet Explorer 11, visit the
Internet Explorer TechNet site and view the Build session,
Better App Compat with Enterprise Mode for Internet Explorer 11.
Documentation and Other Resources
This      blog announcement is Stay
up to date with Enterprise Mode for Internet Explorer 11.
TechNet      contains updated information for exploring, planning, deploying, managing,      and supporting
Internet      Explorer.
A      section on
Enterprise      Mode has been added to the
Internet      Explorer 11 Deployment Guide.
The      Build session on
Better      App Compat with Enterprise Mode for Internet Explorer 11 is available      as a technical overview.
Public      forums for discussing Enterprise Mode deployment, management, and best      practices are available on
TechNet      Forums.
Enterprise Mode Site List Manager
Enterprise      Mode Site List Manager
Windows 7 and Windows Server 2008 R2
KB      article –
Description of      the security update for Internet Explorer 11 on Windows 7 and Windows      Server 2008 R2: April 8, 2014
Cumulative      Security Update for Internet Explorer 11 in Windows 7 (KB2929437)
Cumulative      Security Update for Internet Explorer 11 in Windows 7 x64 Edition      (KB2929437)
Cumulative      Security Update for Internet Explorer 11 in Windows Server 2008 R2 x64
Edition (KB2929437)
Windows 8.1 and Windows Server 2012 R2
KB      article –
Windows RT      8.1, Windows 8.1, and Windows Server 2012 R2 Update April, 2014
Windows      8.1 Update (KB2919355)
Windows      8.1 Update for x64-based Systems (KB2919355)
Windows      Server 2012 R2 Update (KB2919355)
MSDN      Subscribers – Full versions of
Windows      8.1 Enterprise with Update
-=-=-
Also, note this hotfix:
http://support.microsoft.com/kb/2956283/en-au
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Internet Explorer 11 "Enterprise Mode" do not work or do not work correctly!

Dear community,
Since yesterday we test the Feature "Enterprise Mode" for "Internet Explorer 11". However, we have many problems
with this Feature. We have configured it as described by officially instruction by MS, but it does not work
properly. Here is what we have done exactly to test this Feature:
In Registry Key " HKEY_LOCAL_MACHINE \ Software \ Policies \ Microsoft \ Internet Explorer \ Main \ Enterprise Mode " we have created the Entry " Site List " and create the string " Enable" . In the
String "Enable" we have added no value .
In Case of String "Site List" , we have specified the path to the XML file , as value of this String.
The XML file was created with the Site List Manager from Microsoft
And now, we regocnized following Problems:
The "Enterprise Mode" ist only "active", if the User(!) check "Enterprise Mode" under "Tools"...!
The site list is seemingly ignored, although in the Registry "currentversion" is pulled correctly, everytime we change
the XML File. So we think "SiteList" is configured well.
On one of our test computer freezes Internet Explorer 11 , if you try to hook the corporate mode
In Summary, it seems to be configured properly but it even do not work or not work correctly.
Our goal would be:
Enterprise Mode + access to the Site List by IE11 should be "on" by Default!
Entrys of sitelist.XML should be filtered and shown in "Enterprise Mode" or/and the right "DocMode", as configured.
The user should have no chance to check on or off the"enterprise mode"
We use "Windows 7" on all our Clients, as test Clients are also running the same operating System...
Please reply
Thank you very much
Greetings!
Ps: Please do not be angry if pronunciation or grammar do not fit well. English is not my nature language (my nature language is german)

Hi，
According to your description, seems the end-users can manually turn on\off the enterprise mode, If you don''t want this, you can disable the option.
Computer(User) Configuration > Administrative Templates > Windows Components > Internet Explorer\Let users turn on and use Enterprise Mode from the Tools menu option
Disable this option, user will not have "Enterprise Mode" under "Tools", after that, please run gpupdate /force to update the policy, and get "Use the Enterprise Mode IE website list" applied again in the target system.
After that, the enterprise mode website list get applied again, and user don't have an option to disable it.
Yolanda Zhu
TechNet Community Support

How can I allow users to view any Wiki Pages inside my enterprise wiki site collection, as PDF files

We are working on an enterprise wiki site collection, and users start adding wiki pages and link them together. But a new requirement was raised by the customer, to allow users to be able to convert any wiki page to pdf file and save the pdf file to their
local PCs. They are suggesting to add a link or an option inside the upper ribbon , named “Make as PDF”, and once clicked they can view the current wiki as a pdf file.
Not sure what are the capabilities of SharePoint 2013 to do so ? and is there any third paryt tools that allow doing similar tasks ?
Thanks

If you want to save as PDF, could you not use a PDF printer, so the procedure would be to 'Print this page' and the user then selects their PDF printer and where they want to save the file.
but in this way the user will have the page header footer, left navigation included in the pdf file. while i want to extract the body only. i so not think you apprach will work for my requirements

Site list saving

My site list is getting a bit full. How can I save the site list and start a fresh iWeb 08 please?

Quit iWeb.
Create a folder on your desktop to store your old domain.sites2 file.
Go to Home Folder/Library/Application Support/iWeb and drag the domain file out of this into your new folder.
Drag this folder into the trash. Obviously you don't want to empty the trash during all this!
Launch iWeb and choose to create a new domain file. This will be saved to Home Folder/Library/Application Support/iWeb when you "save" it in iWeb or publish to .Mac.
Now drag your folder out of the trash and store it where ever you want in your Home Folder.

Enterprise Mode for Internet Explorer 11. Difference in how adding a site works.

I am noticing a difference in how adding a site to open in Enterprise Mode works.
When I incorporate a XML file created by the List Manager, containing 'http://mysite/mypath'.   Enterprise mode functions for the entire site. When I say entire site, I mean pages in virtual directories also open in Enterprise Mode.
This is good.   But I for the time being I would like to put it on my users to approve their sites.
However, if I choose to not use a file and just allow the users to add sites, when they go to 'http://mysite/mypath' then go to Tools and Enterprise Mode to add the site.    We close Internet Explorer, reopen, enter the site 'http://mysite/mypath'
opens in Enterprise Mode.   But when they navigate to pages located in virtual directories, they display in standards mode.   And would need to be added separately by going to Tools -> Enterprise Mode.
I just want to know am I seeing this behavior correctly, or am I possibly missing a step.
Thanks in advance for the response and feedback.

Hi David,
I am testing in my environment, and I will let you know if we have any result.
Thanks for your patience.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

I am trying to edit my music list and then sync it to my iPhone 5 so I don't run out of storage space. However, I see the check marks on the iTunes library but am unable to uncheck them? How do I manually edit what will be synced to my phone?

I am trying to edit my music list and then sync it to my iPhone 5 so I don't run out of storage space. However, I see the check marks on the iTunes library but am unable to uncheck them? How do I manually edit what will be synced to my phone? (the check marks are not bolded, does this mean they are not in my library but only on my phone?)

You uncheck the music in your iTunes library on your computer and along with sync only checked songs and videos selected under the Summary selection for your iPhone sync preferences with iTunes, only checked songs in your iTunes library will be transferred to your iPhone or remain on your iPhone and the unchecked songs in your iTunes library that are currently on your iPhone will be removed when syncing.
Or make use of iTunes playlists and choose selected playlists, albums, artists under the Music selection for your iPhone sync preferences with iTunes and select the playlists below that you want transferred to your iPhone.

Enterprise Mode site list and manual override

Similar Messages

Maybe you are looking for