Enterprise Portal document preview issue

Greetings,
When viewing a document via the preview function provided by the context menu on the Enterprise Portal on a users laptop, the preview is too small. When I do the same thing on my desktop screen, the preview is adequate because I have a different sized screen. Please advise if/how this can be rectified so that the preview is adequate on any type of screen.
Regards,
Keith

Keith,
I guess you could try changing the resolution on the laptop and checking the preview.
Cheers!
Sandeep Tudumu

Similar Messages

Enterprise Portal Sneak Preview, quick installation guide

Hello,
Two or three months ago I have installed the SAP NetWeaver Enterprise Portal Sneak Preview SP9. For this purpose I have used the quick installation guide which formerly could be found under the following web-address:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/quick installation guide for sap netweaver ep on maxdb,%20Developer%20Edition%20Sneak%20Preview.htm
Some of my colleagues would like to install the same release now but the quick installation guide is not available any more.
Can anybody tell me where the quick installation guide is or which installation guide I can use instead for SP9?
Thanks!

Hey Guys,
I have mailed it to your ID's.
In case anyone else needs it, you can mail me directly:
[email protected]
Wish you all a successful installation ...
Cheers,
Gaurav

Link to download - Enterprise Portal Sneak Preview Version

Hi Guys,
Can somebody send me the link to download Enterprise Portal Sneak Preview Version.
Thanks,
mini

Hi Mini
I think you will find this link helpful
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a818849b-0b01-0010-6795-c0c3e6559a30
Regards
Ken

Enterprise Portal Log off Issue for External User

Hello
We are facing a Enterprise Portal log off issue for one of our external users.
User is logged in and clicks on the "Log Off" link .
User is prompted as seen below:
Are you sure you want to logg off?
Choose Yes or No
Click on Yes and popup window goes away and nothing else happens.
These problems logg off issue problem happening on Internet Explorer 6 but from from firefox browser, its working.
Also popups are not blocked on IE.
EP version with SP level is EP 7.00 SP12.
Even though from Internet explorer 6, i can log in and log off with internal user.
Please advise for the log off problem .

Hello
I added the value ume.logoff.redirect.url =https://poqwas.synenco.com/irj/portal
on Config Tool Global Paramter settings.
Then restart the server.
But I am getting the same problem.when I login with external user ID, then make log off. Nothin Happen...
Please advise

Enterprise Portal Sneak Preview

Hi,
Does someone know whether there is an installation guide
for the Enterprise Portal Sneak Preview Version?
Thanks,
Asu

Hi Asu,
check this one:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/business_packages/a1-8-4/install_howto.zip
Regards,
Ivo

Pdf portfolio document preview issue

I'm creating a pdf portfolio in Acrobat XI and have run into a problem when using grid view. When viewing the pdf portfolio on my 15" laptop, the document preview is cropped in both the thumbnail and larger preview. But when I view the pdf portfolio on a larger monitor, both previews are fine. Any ideas on how I can fix this issue? Thanks so much for reading.

Hi Vikrantt,
I'm using Acrobat 11.0.07. Any other ideas on how I can solve this problem? Thank you.

Enterprise Portal DC Migration Issue into 7.31

Hi Experts,
I have created one Enterprise Portal DC created in 7.0 into 7.31.
After creating it is building successfully using deprecated dependencies.
I need to resolve those dependency before deploying into 7.31 server?
For the Enterprise Portal DC deploy option is also coming as disable.
Am I doing correctly?
We are using NWDS is EHP1 SP08 PAT0011 and JDK 1.6_0_30.
Dependency:
Need your help.
Thanks,
Patralekha

Hi,
Did you find any deprecated API in class files(*.java), It represents like below image.
Then you have to find relevant jar and replace with a new one.
Second option is to create new external library with required jars(Replace deprecated jars with new jars) and give reference to existing dc.
Regards,
Surya.

Netweaver Java Enterprise Portal System Copy issue

Dear friends,
We are trying to export Production portal online without down time and install Target system using import method.
Import process is successfull and we tried doing element.resync=true for force bootstrap from the database. We are able to see SAP standard applicaitons but all custom applications are missing. I mean all application under sap.com are available and all applicaitons under <ourcomapny>.org is not see. We checked the export dump we see all .SDA files for each application in the export dump.
If anyone know the reason why it didn't deploy. Please let me know. We are using Production and Sandbox: NW 2004s EHP1 SP4.
Thank You.
Regards,
Prasad

Please check the note below, which you need to do at the end of import.
Link: [Note 888718 - NW 2004s: Copy Usage EP]

PC-UI: Document Preview not working in Portal

Hello CRM Gurus,
I'm trying to use "Document Preview" as described in the PC-UI Book at Page 157. I've created my own structure ZCRMT_BSP_OPP_CREATE_QUOTATION which includes the structure CRMT_BSP_PREVIEW. I've created my own Modell access class and implemented the READ Method as follows:
method if_crm_bsp_model_access_il~read .
data: lt_screen_structure type table of zcrmt_bsp_opp_create_quotation,
        lv_opp_guid         type crmt_object_guid,
        lv_account          type bu_partner,
        ls_screen_structure like line of lt_screen_structure,
        lv_lock                  type abap_bool,
        lt_object_key            type crmt_bsp_objectkey_tab,
        lv_screen_structure_name type crmt_bsp_scrstrucname,
        wa_portal type char32.
lv_lock = iv_lock.
lt_object_key = it_object_key.
lv_screen_structure_name = iv_screen_structure_name.
* Create Quotation in R/3 from CRM Oportunity
read table lt_object_key index 1 into lv_opp_guid.
data: lt_header_guid type crmt_object_guid_tab,
        lt_orderadm_h type crmt_orderadm_h_wrkt,
        ls_orderadm_h like line of lt_orderadm_h,
        lt_partner type crmt_partner_external_wrkt,
        ls_partner like line of lt_partner.
insert lv_opp_guid into table lt_header_guid.
call function 'CRM_ORDER_READ'
   exporting
     it_header_guid                = lt_header_guid
   importing
     et_orderadm_h                 = lt_orderadm_h
     et_partner                    = lt_partner.
* Read Opportunity Number from Header
read table lt_orderadm_h index 1 into ls_orderadm_h.
read table lt_partner
    with key ref_partner_fct = '00000021' mainpartner = 'X'
    into ls_partner.
* Call ZSDSL_400 via WinGUI
call function 'Z_GET_PORTAL'
    importing
      wa_portal = wa_portal.
* Create Portal Application Integrator URL
concatenate ls_screen_structure-url 'http://' wa_portal '/irj/servlet/prt/portal/prtroot/com.sap.portal.appintegrator.sap.Transaction'
    into ls_screen_structure-url.
concatenate ls_screen_structure-url '?System=SAP_R3&Technique=SSD&TCode=ZSDSLS_227&OkCode=ONLI&GuiType=WinGUI&ApplicationParameter='
    into ls_screen_structure-url.
concatenate ls_screen_structure-url 'KUNNR%3d' ls_partner-ref_partner_no ';SUBMI%3d' ls_orderadm_h-object_id
    into ls_screen_structure-url.
* Open in new Window
ls_screen_structure-object_key = lv_opp_guid.
ls_screen_structure-new_window = 'X'.
append ls_screen_structure to lt_screen_structure.
et_screen_structure = lt_screen_structure.
endmethod.
I've created a new Event ZOPP_CREATE_QUOTATIO which is functional relevant. Added this Event to the Toolbar Group OPP_OIC. Added the Event to the Application Layout of "CRMD_BUS2000111" with position "New Window" and Screen type = PREV Preview. In the Application Set I've added the Modell Access Class ZCL_ANGEBOT_ANLEGEN to the structure ZCRMT_BSP_OPP_CREATE_QUOTATION which is dependent of OPP_HEADER.
When I test the application through CRMC_PCUITOOLS its working perfect. As soon as I run it in the portal the page is refresehed when I click the Button "Create Quotation" but no new window appears.
Any suggestions?
Regards
Gregor

Hi Gregor,
I'm facing the same issue. the print preview is not even working when the application is run thru CRMC_PCUITOOLS.
Also, what Field Group/Tool Bar Group have you assigned to the new entry in the Application Layout?
Regards,
Vishal

Performance issue of BI Reports in SAP Enterprise portal -in SAPNW2004s

Dear friends,
We are integrating BI Reports in SAP Enterprise Portal 7.0 ( SAP NW- 2004s).The reports are running properly .But the issue here is reports are taking long time to open and leading it to performance effect.
Reports in BEX( Bi side) working lilttle better than EP platform.
And Even BI team is looking for ways to improve the performance.
Could you please share your ideas to implement in portal side to increase the performance.
Thanks and Regards
Ratnakar Reddy

Hello Mr. Reddy,
There are two possibilities for slow performance in BW reports, so we need to look into wether its slow in the BW system or at the frontend.
If the problem resides in the BW system then we should be able to trace the reports
and you can go for a SAP EW or GV sessin and SAP will provide recommendations.
If the problem resides at the frontend
Update the frontend servers to the latest frontend release.
Recommended Frontend Release 700
Recommended Frontend Patch 18
Update the frontend servers to the lates SAP GUI release as soon as possible.
Minimum Recommended SAP GUI Release 6.40
Your frontend PCs should fulfill the following requirements:
Each frontend PC should have 500 MHz and 128 MB main memory.
Because of a limit in the addressable memory, Windows 95 is not supported as Frontend OS for 3.X BW Systems. Please refer to SAP Notes 161993, 321973 and 366626 for details.
Please also check SAP Note 147519 "Maintenance strategy/ deadlines 'SAPGUI'".
If you still require any assistance from SAP support then raise a message under component ( probably BW-BEX-ET-WEB).
Provide your input, if you have any.
Thank you,
Tilak

Performance issue of BI reports in SAP Enterprise portal

Dear Friends,
We have integrated BI reports with SAP Enterprise portal 7.0.Reports are running properly But the issue is reports are taking more time to dispsaly its content and leading it to performance effect.
In Bex ( BI side) reports performance is little better than SAP EP platform. BI Team also looking for ways to improve performance at BI side.
Could you please share your valuable ideas to improve the performance at SAP EP side also ..
Thanks and Regards
Ratnakar Reddy

Hi ratnakar,
The first step is to identify which component is causing the performance problem. Run your report in the portal but try appending the string &PROFILING=X in the end of the URL. This will generate BI statistics which you can use to see which component (Java stack, ABAP stack, Database) is causing the performance issue.
Hope this helps.

How to Display DMS document in Enterprise Portal

Hi All,
I have a scenario as described below.
I have a workitem which goes to user in his/her UWL for execution. When this workitem gets executed it displays an Adobe Interactive form.
Iin this Adobe form i am giving links to DMS(Document Management System) documents. So when this link is clicked the related DMS document files should get displayed.
Thru BAPI i m able to get DMS document number its Object Links and details of the files (PDF,DOC,XLS etc..) attached to it.
But I am not able to display this attached files on my enterprise portal. I debugged in R/3 and found out standard Function Modules which are used to display this attached documents of DMS and wrap them in RFC and called this RFC when user clicks link on Adobe Form in EP.
The problem I m facing is this RFC is not able to display the attached document files of DMS document on Portal front end. it gives error as u201CException condition "NOT_SUPPORTED_BY_GUI" raised., error key: RFC_ERROR_SYSTEM_FAILURE"
The reason behind why it is running successfully in R/3 is, it gets front end as SAPGUI but while we execute it thru portal it does not get frontend type as SAPGUI cause portal always runs in Browser not on SAPGUI.
So, Is there any way to display this DMS document files on Enterprise Portal?? Or is it possible using Knowledge Management?? Or any other standard BAPI or FMs which can be used for the same purpose??
Regards,
Dhruv

Hi Steelman,
You have to create a new iview and include it in the page that youhave created.
There are many types of iviews that you can create.
Please refer these link
http://help.sap.com/saphelp_nw2004s/helpdata/en/f5/eb51590e6a11d7b84900047582c9f7/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/f5/eb50360e6a11d7b84900047582c9f7/content.htm
Revert back for further queries.
Regards,
Sharadha

AX 2012 Enterprise portal issue.

We have EP site on AX 2012 and the version of SharePoint is 2010 (Enterprise) RTM.
Once is a day, we get the following error, but after recycling the application pool of the enterprise portal the error is gone.
Message: An unhandled error has occurred. To view details about this error, enable debugging in the web.config file or view the Windows event logs.
Source: Microsoft.SharePoint
Exception details:
The file /AxStoreDropDown.ascx does not exist.
at Microsoft.SharePoint.ApplicationRuntime.SPRequestModuleData.GetWebPartPageData(HttpContext context, String path, Boolean throwIfFileNotFound)
at Microsoft.SharePoint.ApplicationRuntime.SPVirtualFile.GetVirtualPathProviderCacheKey(String virtualPath)
at Microsoft.SharePoint.ApplicationRuntime.SPVirtualPathProvider.GetCacheKey(String virtualPath)
at Microsoft.SharePoint.Publishing.Internal.CmsVirtualPathProvider.GetCacheKey(String virtualPath)
at System.Web.Compilation.BuildManager.GetCacheKeyFromVirtualPath(VirtualPath virtualPath, Boolean& keyFromVPP)
at System.Web.Compilation.BuildManager.GetVPathBuildResultInternal(VirtualPath virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile)
at System.Web.Compilation.BuildManager.GetVPathBuildResultWithNoAssert(HttpContext context, VirtualPath virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile)
at System.Web.UI.TemplateControl.LoadControl(VirtualPath virtualPath)
at Microsoft.Dynamics.Framework.Portal.UI.WebControls.AxUserControlUpdatePanel.LoadControl()
at Microsoft.Dynamics.Framework.Portal.UI.WebControls.AxUserControlUpdatePanel.LoadHostedControl()
at Microsoft.Dynamics.Framework.Portal.UI.WebControls.AxUserControlUpdatePanel.AddHostedControl()
at Microsoft.Dynamics.Framework.Portal.UI.WebControls.AxUserControlUpdatePanel.OnInit(EventArgs e)
at System.Web.UI.Control.InitRecursive(Control namingContainer)
at System.Web.UI.Control.InitRecursive(Control namingContainer)
at System.Web.UI.Control.InitRecursive(Control namingContainer)
at System.Web.UI.Control.InitRecursive(Control namingContainer)
at System.Web.UI.Control.InitRecursive(Control namingContainer)
at System.Web.UI.Control.InitRecursive(Control namingContainer)
at System.Web.UI.Control.InitRecursive(Control namingContainer)
at System.Web.UI.Control.InitRecursive(Control namingContainer)
at System.Web.UI.Control.InitRecursive(Control namingContainer)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)

Hello,
I am still facing this issue in a production environment. Recycling app pool is fixing the issue for an hour or so, but once left for an hour it throws the same error again.
I wonder if we got a formal response from Microsoft saying why this happens, is it a Memory leak, or a caching issue ?
Thanks,

Workflow Issue - Enterprise Portal based application not updating Notif.

Hi,
We have designed some workflows based on Adobe Interactive Forms.
We have mapped the APPROVAL STEP to an Enterprise Portal Application(IsrFormApproval) through the SWFVISU txn.
We had a requirement that the Supervisor can change the contents of the Adobe Form during Approval. But when we make these changes to the Adobe form before approval, these changes are not persistent. I mean, when I make changes to the Form, these changes are not getting reflected in further approvals.
Can anyone help me out in these regards.
The notification changes are not getting updated by this IsrFormApproval application.
Regards,
Raja Sekhar

Hi Jocelyn,
Thanks for the reply again.
Yes, I checked my PC has the following ActiveX Controls in place.
1)AcroIEHelper.dll
2)AcroPDF.dll
3)GbDetect.dll
4)Pdfshell.dll
I hope these are the only DLL's that should be there by default.
Is there any specific Configuration to be done to ADOBE DOCUMENT SERVER for this feature to work alone.
Can you let us know where should we mention the TEST OPTION in QISRSCENARIO txn.
Yah,I maintained all the needed parameters as you said.
I cant find any error message in workflow log and flow goes smoothly to the next level supervisor without persisting the changes done by first level supervisor.
So,can you let us know clearly if <b>IsrFormApprove</b> application can really update the NOTIFICATION details at Supervisor Level.
I will check the full cycle if WS50000041 today.
Regards,
Raja Sekhar

Enterprise Portal For Sneak Preview 6.4

Hi All,
From where do i get the Enterprise Portal(/irj/portal) component compatible with Netweaver 6.4 Sneak Preview.
Regards,
Rupak Kumar...

Hi Rupak,
in sdn site...top level navigation , select "downloads". then in "Available Downloads" ..select "ep" . In that downlaod "Sneak Preview SAP NetWeaver 2004 and 2004s - Full Java Edition with SAP NetWeaver Portal".
regards
Amit
PS : reward points if helpful

Enterprise Portal document preview issue

Similar Messages

Maybe you are looking for