Enterprise report TEMPLATE=0REPORT_DEFAULT_TEMPL does not exist

Hi guys ,
I have actvated the above mentioned template in business content but when i performed a check in RS_TEMPLATE_MAINTAIN_70 , iam getting the followiong error.
Enterprise report TEMPLATE=0REPORT_DEFAULT_TEMPL does not exist
Enterprise report TEMPLATE=0REPORT_DEFAULT_TEMPL does not exist
Web Item Report error: The report cannot be opened under "TEMPLATE=0REPORT_DEFAULT_TEMPLATE"
The report cannot be opened
The report cannot be opened under "TEMPLATE=0REPORT_DEFAULT_TEMPLATE"
Check whether the report is at this location and it can be read
Contact your system administrator. This error was recorded
Can anyone have some idea on this..
thanks

Any help on this??

Similar Messages

Erorr " The Web template "0ANALYZER" does not exist in the master system "

Hi
i am trying to run query from Query designer and execute in Web .i am trying to execute this in query designer. i am getting below error.
"The Web template "0ANALYZER" does not exist in the master system "
i activated all templates but not able to execute any report in web
i am able to execute same report in webaplication but not thru query desinger... do i need to setup anything.?
please do help me

For clarification:
If following happens:
> you are launching the query with URL like:
http://<server>:<port>/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=<your query name>
> then you get the error message "The Web template "0ANALYZER" does not exist in the master system"
--> then you should check the settings for default templates in SPRO. Please mention that the default Web Template for query execution (BEx Web Analyzer) is called 0ANALYSIS_PATTERN.
--> also check the 0ANALYZER Web Template in SE38 / Program: RS_TEMPLATE_MAINTAIN_70 -> then check if the template is active.
When you problem is other nature you have to describe it in detail.
Regards, Karol

Windows Server 2008R2 running Remote Desktop Services reports printer process does not exist when installing PDF printer

Windows Server 2008R2 running Remote Desktop Services reports printer process does not exist when installing PDF printer, And when Installing network printers from the domain controller it reports it cannot connect to printer. I can ping all
network devices. I can connect to the internet.
On boot I get a netlogon 5719 error followed by service control manager errors 7023,7001 and a group policy error 1129.
Clients can connect to the remote application and RDP operates to connect to the server internally and externally.
The domain controller is another server 2008r2 box. I have scoured the internet but have not found any solutions that work yet.

Hi,
After referring to your post, it can be identified that the issue which you are facing is mostly due to some network issue in your environment. Please recheck your network connection issue between computer and domain controller.
Can you able to ping with IP address and also with fully qualified name of a domain controller in the users' and computers' domain. If it fails states that name resolution issue with computer and domain controller. Are you using MS DHCP Relay agent then there’s
available Hotfix for the particular Event ID. Please go through this KB 2459530 to fix the error event ID.
As per the net logon error 5719 which you are facing states that the client component of Netlogon was unable to locate a DC for the domain it was trying to perform an operation against. Below is one of the reason. If this is being logged on a DC and the event
refers to the DC's own domain, something might be preventing the client component of Netlogon from starting a network session (to itself or to another DC in the domain). The following event 7001 & 7023 states start & stop operation service. Please
go through beneath article for more details.
1. Event ID 5719 is logged when you start a computer
2. Netlogon 5719 and the Disappearing Domain [Controller]
3. Event ID 1129 — Microsoft-Windows-GroupPolicy
Hope it helps!
Regards.

Web template "0ADHOC" does not exist in the master system error

Hi to all,
The Web template "0ADHOC" does not exist in the master system.
Error coming while executing query on web template.
Via TCODE RSCUTV27 I have checked the default web template 0ADHOC is already there for adhoc analysis.
Please can anyone tell me what the problem is?
I shall be thankful to you for this.
Regards
Pavneet Rana

Hi,
According to the error message,
The template ""0ADHOC" does not exist in the BI system. It has to be transported too.
OR
Logon to R3 and check in Transaction SE38 with program "RS_TEMPLATE_MAINTAIN_XX".
You will see
                                     Template ID :
                                     Reusable Web Item ID :
                                     Version :
Give "template name" and see what is the version.
If it is "D" then please change that to version "A". and check if issue persist.
Hope this helps.
Regards,
Mani

Standard SAP report group 6PP3 does not exist

A user is attempting to run the transaction S_ALR_87013544 and receives the error "program 6PP3 does not exist". I used gr53 to display report groups it is not in the list.
I cannot generate 6PP3 either. I cannot create 6PP3 because it is a standard report group
Any ideas?

1.   Use GR59 IN THE <TRG> client
     a. 300 in this case
     b.     SOURCE client = 000
     c.     Leave all fields blank hit EXECUTE
     d.     Select the report group to generate from the list
        i. BPP3
       ii. Select the CONFIRM button

The Web template does not exist in the master system

We are using a Web Template (ZPORTAL) as an access point to other web templates and to 0ANALYZER. We recieve an abort when the use logs on for the first time and is presented with the password change window. When they change the password and click ok, the following message is recieved: The Web template "ZPORTAL=" does not exist in the master system. After the abort, they go back to the ZPORTAL again in which case no abort occurs and they are able to navigate the web template. This only happens when they have to change their password. Has anyone else seen this?

Make sure the template exists in the system which is configured in the iView property.
There should be a one to one mapping between BI and EP systems.
You cannot connect 2 BI system to one EP system and configure BI JAVA

Report group and report library does not exist

Dear Guru's
We are not able to execute the report S_ALR_87013019 in production. After doing analyses, we came to know that library 602 & report group 6OBU does not exist in production, and hence we are not able to excute this report.
We have to tried to import from client '000' from transaction code GR59, But in that we are not getting 6OBU report group.
Please help us to resolve the issue, as we required this report on priority basis.

Dear Prashant,
Thanks for your reply.
The solution given by you is to transport the report library from Dev Client. But our client does not transaport the reports in production system.
Is ther any other solution to retrieve the library.
Thanks
Varsha

"WEB_0ADHOC" does not exist in the master system

I inserted a query into report designer and made a few changes (font/adding columns, custom text) and when i'm trying to launch it in Portal ...this is the error msg i get
The initial exception that caused the request to fail, was:
The Web template "WEB_0ADHOC" does not exist in the master system
com.sap.ip.bi.base.exception.BIBaseRuntimeException: The Web template "WEB_0ADHOC" does not exist in the master system
at com.sap.ip.bi.webapplications.runtime.service.template.impl.TemplateService.getTemplateContent(TemplateService.java:57)
at com.sap.ip.bi.webapplications.runtime.jsp.portal.service.template.PortalTemplateAccessService.getTemplateContent(PortalTemplateAccessService.java:80)
at com.sap.ip.bi.webapplications.runtime.preprocessor.Preprocessor.parseTemplate(Preprocessor.java:161)
at com.sap.ip.bi.webapplications.runtime.xml.XmlTemplateAssembler.doInit(XmlTemplateAssembler.java:83)
at com.sap.ip.bi.webapplications.runtime.template.TemplateAssembler.init(TemplateAssembler.java:126)
In the web application designer, i tried to see if the WEB_0ADHOC is available or not ... this is the msg i get:
Diagnosis
You have attempted to open query ! from the Query Designer. However, this query does not exist in the database in the system to which you have made a connection.
System Response
Opening the query was terminated.
Procedure
Make sure that you have connected to the correct BW system. Note: The query may have been deleted by another user.
i even checked in the IMG setting to see if this is the default template for enterprise reporting and it is.
How do I make it available in the system.
Message was edited by:
voodi
Message was edited by:
voodi

Hello,
Someone changed the default templates in your system. WEB_0ADHOC is wrong.
Delete the entries and restart your java server (because of cache). This will reset the changes to default. All templates for new runtime must be visible in the transaction SE38, program RS_TEMPLATE_MAINTAIN_70. source code must begin with <bi:bisp ...
Regards, Karol
SAP NetWeaver BI, Development

Counter group "WEB_SYSTEM_CAPACITY" does not exist.

Hi all;
Why Im having this issue.
The Critical message is:
Counter group "WEB_SYSTEM_CAPACITY" does not exist.
Product: IronPort S370 Web Security Appliance
Model: S370
Version: 7.1.3-011
After I received the first notification, I can´t see any kind of report in Reporting->Overview.
Regards;

Hi,
According to the error message,
The template ""0ADHOC" does not exist in the BI system. It has to be transported too.
OR
Logon to R3 and check in Transaction SE38 with program "RS_TEMPLATE_MAINTAIN_XX".
You will see
                                     Template ID :
                                     Reusable Web Item ID :
                                     Version :
Give "template name" and see what is the version.
If it is "D" then please change that to version "A". and check if issue persist.
Hope this helps.
Regards,
Mani

Error, package does not exist, thrown when calling jsp page

Hi
I have downloaded sample jsp pages for interaction with Crystal reports. When I compile these jsp pages in NetBeans 3.6 there are no problems. When I deploy these pages and associated libraries to Tomcat 5, I get the following error when attempting to call the jsp page, but all the jars used in NetBeans are present in the web-inf/lib directory and I have looked in the jars and found classes in the com.crystaldecisions.report.web.viewer package. I have been unable to find any information after googling and looking at the jakarta bug database. What am I doing wrong?
The error...
2004-09-22 17:40:30 StandardWrapperValve[jsp]: Servlet.service() for servlet jsp threw exception
org.apache.jasper.JasperException: Unable to compile class for JSP
An error occurred at line: 1 in the jsp file: /CrystalReportsInteractiveViewer.jsp
Generated servlet error:
[javac] Compiling 1 source file
E:\Tomcat5\work\Catalina\localhost\crystal\org\apache\jsp\SimplePreviewReport_jsp.java:9: package com.crystaldecisions.report.web.viewer does not exist
import com.crystaldecisions.report.web.viewer.*;
^
E:\Tomcat5\work\Catalina\localhost\crystal\org\apache\jsp\SimplePreviewReport_jsp.java:180: cannot resolve symbol
symbol : class CrystalReportInteractiveViewer
location: class org.apache.jsp.SimplePreviewReport_jsp
CrystalReportInteractiveViewer viewer = new CrystalReportInteractiveViewer();
^
An error occurred at line: 1 in the jsp file: /CrystalReportsInteractiveViewer.jsp
Generated servlet error:
E:\Tomcat5\work\Catalina\localhost\crystal\org\apache\jsp\SimplePreviewReport_jsp.java:180: cannot resolve symbol
symbol : class CrystalReportInteractiveViewer
location: class org.apache.jsp.SimplePreviewReport_jsp
CrystalReportInteractiveViewer viewer = new CrystalReportInteractiveViewer();
^
An error occurred at line: 1 in the jsp file: /CrystalReportsInteractiveViewer.jsp
Generated servlet error:
Note: E:\Tomcat5\work\Catalina\localhost\crystal\org\apache\jsp\SimplePreviewReport_jsp.java uses or overrides a deprecated API.
Note: Recompile with -deprecation for details.
3 errors
     at org.apache.jasper.compiler.DefaultErrorHandler.javacError(DefaultErrorHandler.java:127)
     at org.apache.jasper.compiler.ErrorDispatcher.javacError(ErrorDispatcher.java:351)
     at org.apache.jasper.compiler.Compiler.generateClass(Compiler.java:415)
     at org.apache.jasper.compiler.Compiler.compile(Compiler.java:458)
     at org.apache.jasper.compiler.Compiler.compile(Compiler.java:439)
     at org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:552)
     at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:291)
     at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:301)
     at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:248)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:284)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:204)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:256)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:151)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:564)
     at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:245)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:199)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:151)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:564)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:195)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:151)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:164)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:149)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:564)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:156)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:151)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:564)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:972)
     at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:211)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:805)
     at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:696)
     at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:605)
     at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:677)
     at java.lang.Thread.run(Thread.java:534)
The offending page is ....
<%
/*==========================================================================
INSTANTIATE THE VIEWER AND DISPLAY THE REPORT THROUGH THE INTERACTIVE VIEWER
============================================================================
    - Create a Viewer object
    - Set the source for the viewer to the client documents report source
    - Process the http request to view the report
    - Dispose of the viewer object
// Create an Interactive Viewer
CrystalReportInteractiveViewer viewer = new CrystalReportInteractiveViewer();
// Set the name for the interactive viewer
viewer.setName("Crystal_Report_Interactive_Viewer");
// Set the source for the interacive viewer to the client documents report source
viewer.setReportSource(clientDoc.getReportSource());
// Process the http request to view the report
viewer.processHttpRequest(request, response, getServletConfig().getServletContext(), out);
// Dispose of the viewer object
viewer.dispose();
%>included in...
<%@ page import="com.crystaldecisions.sdk.occa.report.application.*"%>
<%@ page import="com.crystaldecisions.sdk.occa.report.data.*"%>
<%@ page import="com.crystaldecisions.sdk.occa.report.lib.*"%>
<%@ page import="com.crystaldecisions.report.web.viewer.*"%>
<html>
<head>
<title>Begin Here - Simple Preview Report</title>
</head>
<body>
<%
/*=================================================================
WORKING WITH THE REPORT APPLICATION SERVER AND JSP TO VIEW REPORTS
===================================================================
Authors Name: Ken Andony
Technology supported by the app: Report Application Server
ALWAYS REQUIRED STEPS
   - Create a new Report Application Session
   - Create a Report Application Server (RAS) Service
   - Set the RAS Server to be used for the service
   - Initialize the RAS Service
   - Create the report client document object
   - Set the RAS Server to be used for the report client document
   - Open the report, and set the open type to Read Only
INSTANTIATE THE REPORT VIEWER
   - Create a Viewer object
   - Set the source for the viewer to the client documents report source
   - Process the http request to view the report
   - Dispose of the viewer object
==================================================================*/
* This line creates a string variable called reportname that we will use to pass
* the Crystal Report filename (.rpt file) to the OpenReport method contained in
* the AlwaysRequiredSteps.jsp.
String reportName ="SimplePreviewReport.rpt";
%>
<%
/* ALWAYS REQUIRED STEPS
Include the file AlwaysRequiredSteps.jsp which contains the code
for steps:
   - Create a new Report Application Session
   - Create a Report Application Server (RAS) Service
   - Set the RAS Server to be used for the service
   - Initialize the RAS Service
   - Create the report client document object
   - Set the RAS Server to be used for the report client document
   - Open the report, and set the open type to Read Only */
%>
<%@ include file="AlwaysRequiredSteps.jsp"%>
<%
/* INSTANTIATE THE REPORT VIEWER
There are three Report Viewers:
1. Crystal Reports Interactive Viewer
2. Crystal Reports Viewer
3. Crystal Reports Parts Viewer
The choices are CrystalReportsInteractiveViewer.jsp, CrystalReportsViewer.jsp,
CrystalReportsPartsViewer.jsp
Note that to use this include you must have the appropriate .jsp file in the
same virtual directory as the main jsp page.
=============================================================================
    DISPLAY THE REPORT
    - display the report using one of the Thin Client DHTML viewers
   Include one of the DHTML Viewers.
    - Crystal Reports Interactive Viewer          =   CrystalReportsInteractiveViewer.jsp
    - Crystal Reports Viewer                                        =   CrystalReportsViewer.jsp
    - Crystal Reports Parts Viewer                         =   CrystalReportsPartsViewer.jsp
    Note** - To use the report parts viewer successfully you are required to
    choose and name three objects in the report to Node0, Node1 and Node2.
    You can access an objects name by using the Format Editor dialog box.
    For more information on the Format Editor Dialog Box and setting objects
    names, please refer to the Help Contents (Help Menu->Crystal Reports Help)
    or by pressing F1
=============================================================================*/
%>
<%@ include file="CrystalReportsInteractiveViewer.jsp" %>
</body>
</html>

Thanks Tien-Chih Wang. It worked...well I'm getting a new set of errors, but progress has been made!
I understand that if placed in the common directory the jar will be available to all webapps but why does it make a difference whether a jar file is placed under the $TOMAT_HOME/common/lib or $TOMAT_HOME/webapps/appname/web-inf/lib directory if I only need to access the jar from one webapp?

Message no. DS017 Program 4FBU does not exist

When I run FM Report Painter "Budget Consumption", there is Message no. DS017 Program 4FBU does not exist. How could I resolve?
Regards
Ton

Hi Eli
Thank you for your advised. I found that the report "4FBUDCON" & "4FBUDGET" in library 4FM are not assigned to report group.
I use GR59 to import library "4FBC" & "4FBU" that missing from my target client. These report is in Library "4FM" and Table "FMRBCS" (compliance with reports). Then, I go to GR52 to generate Report Group but the message appeared :
- Report 4FM 4FBUDCON does not exist.
- Report group 4FBC does not contain any reports
So I try GRR3 to execute report and the system request to assign this report to report group. I assign report group 4FBC, the below message occurred.
- Objects with leading numerals may not be created.
My issue is related with T-Code FMRP_RW_BUDCON - Overview of Budget Consumption cannot be executed. SE93 advisewd that this T-Code related to Report Group 4FBC, while I cannot generate report group 4FBC.
In FME2, I tried execute all reports but It seem like not related to this t-code. Could you please advice more for report copying process from source client 000?
Regards,
Ton

Error: web template does not exist in master system

I have Bex 7x query. I wnat to publish it on SAP enterprise portal (EP 7.0 SP19).
When I create a Bex iview and provide link of query, I get following error in preview:
The webtemplate <queryname> does not exist in master system.
Could you please let me know what can be the root cause of this error?
Regards,
Deepti

Dear Deepti,
Can you please make sure that Web template "0ANALYSIS_PATTERN" is acive in your system. If not, please activate it from
Business content.
You can check this by following below steps:
Please run TX SE38 and Execute Report RS_TEMPLATE_MAINTAIN_70 and enter the template name and execute.
If you could see the HTML code , this means it is activated.
Could you also please confirm me the settings you have in TX RSCUSTV27.
Regards,
Arvind

Import statement reports 'package does not exist'

I am seeing another odd error. I'm working on learning how to read and write to text files, and I have 2 errors reported, but one is obviously caused by the other. My package is labeled as such (copy>paste of package line):
package michaelchristopherp4db;
and the import line is this (copy>paste again):
import michaelchristopherp4db.ProductRecord;
However, Netbeans looks at the import and flags it red, saying package michaelchristopherp4db does not exist. this caused my line:
ProductRecord product = new ProductRecord();
to also be flagged in red as it cannot find the ProductRecord class. However, it has no problems with any of the product.get* method calls. Thank you in advance for any ideas or input.
here is the full code of the file reporting the errors.
* To change this template, choose Tools | Templates
* and open the template in the editor.
package michaelchristopherp4db2;
import java.io.File;
import java.io.FileNotFoundException;
import java.lang.IllegalStateException;
import java.lang.SecurityException;
import java.util.NoSuchElementException;
import java.util.Formatter;
import java.util.FormatterClosedException;
import java.util.Scanner;
import michaelchristopherp4db.ProductRecord;
/* @author info
public class readTxt
    private Scanner txtfile;
    private Formatter wishList;
    private Formatter giftIdeas;
    private Formatter priceError;
    //let user open file
    public void openFile()
    {//open method openFile
        try
        {//open try block
            priceError = new Formatter("priceerror.txt");//open object for items with invalid prices
            giftIdeas = new Formatter("giftideas.txt");//open object for gift ideas
            wishList = new Formatter("wishlist.txt");//open object for wish list
            txtfile = new Scanner(new File("products.txt"));//tell the compiler which file to use for input
        }//close try block
        catch (FileNotFoundException fileNotFoundException)
        {//open file not found catch block
            System.err.println("Error opening or creating file.");
            System.exit(1);
        }//close file not found catch block
        catch ( SecurityException securityException )
        {//start catch for SecurityException
            System.err.println("File Write access is denied.");
            System.exit(1);//END PROGRAM
        }//end catch
    }//close openFile method
    public void readProducts()
    {//open readProducts method
        ProductRecord product = new ProductRecord();//create object to hold read data
        //print headers for for output columns
        System.out.printf("%-10s%-12s%10s\n", "Product ID", "Product Name", "Price");
        try //read records from the file
        {//open try block
            while (txtfile.hasNext())
            {//open while
                product.setproductID(txtfile.nextInt());//get productID
                product.setproductName(txtfile.next());//get product name
                product.setproductPrice(txtfile.nextDouble());//get product price
                //print collected product details
                System.out.printf("%-10d%-12s%10.2f\n", product.getproductID(),
                        product.getproductName(), product.getproductPrice());
                if (product.getproductPrice()>50.0)
                {//open if to store items $50 or more to wishlist.txt
                    wishList.format("%-10d%-12s%10.2f\n", product.getproductID(),
                            product.getproductName(), product.getproductPrice());
                }//close if $50 or greater
                else if (product.getproductPrice()<0.0)
                {//open if less than zero
                    priceError.format("%-10d%-12s%10.2f\n", product.getproductID(),
                            product.getproductName(), product.getproductPrice());
                }//close if less than zero
                else
                {//open else for gift ideas from $0 to $50
                    giftIdeas.format("%-10d%-12s%10.2f\n", product.getproductID(),
                            product.getproductName(), product.getproductPrice());
                }//close else for gift ideas
            }//close while
        }//close try block
        catch (NoSuchElementException elementException)
        {//open no such element exception catch
            System.err.println("File improperly formed.");
            txtfile.close();//close text file
            System.exit(1);
        }//close no such element exception catch
        catch (IllegalStateException stateException)
        {//open illegal state exception catch
            System.err.println("Error reading from file.");
            System.exit(1);
        }//close illegal state exception catch
    }//close readProducts method
    //close file and end application
    public void closeFile()
    {//open closeFile method
        if (txtfile != null)
            txtfile.close();//close file
    }//close closeFile method
}//end application readTxtAnd the code at the top of the class I am trying to import (so you can see the package I am trying to import)
* To change this template, choose Tools | Templates
* and open the template in the editor.
package michaelchristopherp4db;
* @author
public class ProductRecord {

I am embarrassed to admit this, but I am completely lost on the last question.. I have no clue wether it is a convenience for development or a dependancy, as I have not learned those terms or distinctions yet. For now I copied the ProductRecord file into my new project folder and renamed it's project line to match the new project name. However, while that eliminated the package does not exist error, and netbeans reports no errors now, when I run the program it does not write the new files. I have made some modifications to the code tryiing to get it to write properly but so far no luck in makingit work. Here is the current version of the file not running right.
* To change this template, choose Tools | Templates
* and open the template in the editor.
package michaelchristopherp4db2;
import java.io.File;
import java.io.FileNotFoundException;
import java.lang.IllegalStateException;
import java.lang.SecurityException;
import java.util.NoSuchElementException;
import java.util.Formatter;
import java.util.FormatterClosedException;
import java.util.Scanner;
/* @author
*   Michael Christopher
*   IT215-1004D-03
*   December 30, 2010
*   Phase 4 DB 2
public class readTxt
    private Scanner txtfile;
    private Formatter wishList;
    private Formatter giftIdeas;
    private Formatter priceError;
    //let user open file
    public void openFile()
    {//open method openFile
        try
        {//open try block
            priceError = new Formatter("priceerror.txt");//open object for items with invalid prices
            giftIdeas = new Formatter("giftideas.txt");//open object for gift ideas
            wishList = new Formatter("wishlist.txt");//open object for wish list
            txtfile = new Scanner(new File("products.txt"));//tell the compiler which file to use for input
        }//close try block
        catch (FileNotFoundException fileNotFoundException)
        {//open file not found catch block
            System.err.println("Error opening or creating file.");
            System.exit(1);
        }//close file not found catch block
        catch ( SecurityException securityException )
        {//start catch for SecurityException
            System.err.println("File Write access is denied.");
            System.exit(1);//END PROGRAM
        }//end catch
    }//close openFile method
    public void readProducts()
    {//open readProducts method
        ProductRecord product = new ProductRecord();//create object to hold read data
        //print headers for for output columns
        wishList.format("%-10s%-12s%10s\n", "Product ID", "Product Name", "Price");
        giftIdeas.format("%-10s%-12s%10s\n", "Product ID", "Product Name", "Price");
        priceError.format("%-10s%-12s%10s\n", "Product ID", "Product Name", "Price");
        try //read records from the file
        {//open try block
            while (txtfile.hasNext())
            {//open while
                product.setproductID(txtfile.nextInt());//get productID
                product.setproductName(txtfile.next());//get product name
                product.setproductPrice(txtfile.nextDouble());//get product price
                if (product.getproductPrice()>50.0)
                {//open if to store items $50 or more to wishlist.txt
                    wishList.format("%-10d%-12s%10.2f\n", product.getproductID(),
                            product.getproductName(), product.getproductPrice());
                }//close if $50 or greater
                else if (product.getproductPrice()<0.0)
                {//open if less than zero
                    priceError.format("%-10d%-12s%10.2f\n", product.getproductID(),
                            product.getproductName(), product.getproductPrice());
                }//close if less than zero
                else
                {//open else for gift ideas from $0 to $50
                    giftIdeas.format("%-10d%-12s%10.2f\n", product.getproductID(),
                            product.getproductName(), product.getproductPrice());
                }//close else for gift ideas
            }//close while
        }//close try block
        catch (NoSuchElementException elementException)
        {//open no such element exception catch
            System.err.println("File improperly formed.");
            txtfile.close();//close text file
            System.exit(1);
        }//close no such element exception catch
        catch (IllegalStateException stateException)
        {//open illegal state exception catch
            System.err.println("Error reading from file.");
            System.exit(1);
        }//close illegal state exception catch
    }//close readProducts method
    //close file and end application
    public void closeFile()
    {//open closeFile method
        if (txtfile != null)
            txtfile.close();//close file
    }//close closeFile method
}//end application readTxtwith the System.out.printf lines in the ReadProducts method it would properly print to screen all of the elements in the products.txt file, it is not outputting to the other .txt files at all. I will be exploring the closeFile method in case the error is due to not closing all of the files in that method, but does anyone else see what might cause it not to output the data to the appropriate .txt files?

SDKException$PluginNotFoundAtCMS: The plugin Enterprise does not exist in the CMS

Post Author: NorfolkNChance
CA Forum: JAVA
Hi, I am trying for the first time to integrate my crystal reports into java J2ee.
I have been following the tutorials on http://devlibrary.businessobjects.com/BusinessObjectsXIR2/en/en/BOE_SDK/boesdk_java_dg_doc/doc/boesdk_java_dg/HowToExamples3.html
and think I am doing allright. I have imported all the jar I should do from the BO installation directories.
so I am running this code below:
     String cms = "*********:6400";     String username = "administrator";     String password = "*********";     String auth = "Enterprise";
//   Attempt logon. Create an Enterprise session
        try {   // manager object.   ISessionMgr sm = CrystalEnterprise.getSessionMgr();
   // Log on to BusinessObjects Enterprise   IEnterpriseSession enterpriseSession = sm.logon(username, password, cms, auth);   System.out.println("ddd");     } catch (SDKException e) {   // TODO Auto-generated catch block   e.printStackTrace(); }
When it reaches the line in bold it throws an exception:
[09/10/07 12:16:14:738 BST] 00000032 SystemErr R com.crystaldecisions.sdk.exception.SDKException$PluginNotFoundAtCMS: The plugin Enterprise does not exist in the CMS
cause:com.crystaldecisions.enterprise.ocaframework.idl.OCA.oca_abuse: IDL:img.seagatesoftware.com/OCA/oca_abuse:3.2
detail:The plugin Enterprise does not exist in the CMS
The exception originally thrown was com.crystaldecisions.enterprise.ocaframework.idl.OCA.oca_abuse: IDL:img.seagatesoftware.com/OCA/oca_abuse:3.2
is someone able to help me with this expection? Do I need to set something up on the sever?

Post Author: Ted Ueda
CA Forum: JAVA
String auth = "secEnterprise";Sincerely,Ted Ueda

SSMA for Oracle 6.0 Cannot connect to Oracle DB reporting "table or view does not exist"

SSMA For Oracle v6.0.0
MS SQL Server Enterprise 64bits v11.0.3000.0
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
Symptom:
when connecting Oracle, it reports error "Common Requirement: User does not have required permissions". Then it reports error: "Error occurred while collecting data."
The following is log:
[Generic: Mandatory] [1500/1] [2015-03-03 04:19:29]: SQL Server Migration Assistant for Oracle v6.0.0
[Generic: Mandatory] [1500/1] [2015-03-03 04:19:29]: Starting assembly: SSMAforOracle, Version=6.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Created: 7/22/2014 4:42:22 PM
Last Modified: 7/22/2014 4:42:22 PM
OS Version: Microsoft Windows NT 6.1.7601 Service Pack 1
OS architecture: x64
Processor architecture: AMD64
Current culture: en-US
UI culture: en-US
[Collector: Mandatory] [1500/4] [2015-03-03 04:20:04]: Oracle connection provider: OracleClient.
[Collector: Mandatory] [1500/4] [2015-03-03 04:20:04]: Oracle connection mode: Standard.
[Collector: Mandatory] [1500/4] [2015-03-03 04:20:06]: Oracle server version: '11.2.0.3.0'.
[Gui: Error] [1500/4] [2015-03-03 04:20:12]: LowLevelAdapter.ReadSource : Read Source error: Microsoft.SSMA.Framework.Generic.Collectors.CollectorException: Error occurred while collecting data. ---> System.Data.OracleClient.OracleException: ORA-00942: table
or view does not exist
at System.Data.OracleClient.OracleConnection.CheckError(OciErrorHandle errorHandle, Int32 rc)
at System.Data.OracleClient.OracleCommand.Execute(OciStatementHandle statementHandle, CommandBehavior behavior, Boolean needRowid, OciRowidDescriptor& rowidDescriptor, ArrayList& resultParameterOrdinals)
at System.Data.OracleClient.OracleCommand.ExecuteScalarInternal(Boolean needCLStype, Boolean needRowid, OciRowidDescriptor& rowidDescriptor)
at System.Data.OracleClient.OracleCommand.ExecuteScalar()
at Microsoft.SSMA.Framework.Generic.DbUtilities.SsmaDbCommand.ExecuteScalar()
at Microsoft.SSMA.Framework.Oracle.Collector.OracleObjectCollector.ExecuteScalarToInt(IDbConnection connection, String text)
at Microsoft.SSMA.Framework.Oracle.Collector.OracleObjectCollector.GetCountForExcludedSchemas(IDbConnection connection, IEnumerable`1 excludedSchemas, Int64 version)
at Microsoft.SSMA.Framework.Oracle.Collector.OracleObjectCollector.CountObjects(IDbConnection connection, Int64 serverVersion, OracleCollectionFilter filter, Set`1 excludedSchemas)
at Microsoft.SSMA.Framework.Oracle.Collector.OracleObjectCollector.CollectDataIntoMetabase(XMetabase xMetabase, IDbConnection connection, Int64 serverVersion, OracleCollectionFilter filter, IUIProgressBarProvider progressBarProvider, IUIStopOperationProvider
stopOperationProvider, ICollectionContext context)
at Microsoft.SSMA.Framework.Oracle.Collector.OracleObjectCollector.CreateMetabaseAndCollectData(IDbConnection connection, String xmlConnectionParameters, XNode xFilter, IUIProgressBarProvider progressBarProvider, IUIStopOperationProvider stopOperationProvider,
ICollectionContext context)
--- End of inner exception stack trace ---
at Microsoft.SSMA.Framework.Generic.Workspaces.Default.MetabaseWorkspaceItem.Connect(String connectionParameters, SecureString password)
at Microsoft.SSMA.GUI.Product.OracleToMsSql.LowLevel.AppConnectToSourceOracle.ConnectToSourceStart(Object guiContext)
[Gui: Error] [1500/4] [2015-03-03 04:20:12]: Exception: Error occurred while collecting data.
site: Void Connect(System.String, System.Security.SecureString)
source: Microsoft.SSMA.Framework.Generic.SSMAEnvironment
at Microsoft.SSMA.Framework.Generic.Workspaces.Default.MetabaseWorkspaceItem.Connect(String connectionParameters, SecureString password)
at Microsoft.SSMA.GUI.Product.OracleToMsSql.LowLevel.AppConnectToSourceOracle.ConnectToSourceStart(Object guiContext)
[Gui: Error] [1500/4] [2015-03-03 04:20:12]: Inner Exception #1: ORA-00942: table or view does not exist
site: Void CheckError(System.Data.OracleClient.OciErrorHandle, Int32)
source: System.Data.OracleClient
error code: -2146232008
at System.Data.OracleClient.OracleConnection.CheckError(OciErrorHandle errorHandle, Int32 rc)
at System.Data.OracleClient.OracleCommand.Execute(OciStatementHandle statementHandle, CommandBehavior behavior, Boolean needRowid, OciRowidDescriptor& rowidDescriptor, ArrayList& resultParameterOrdinals)
at System.Data.OracleClient.OracleCommand.ExecuteScalarInternal(Boolean needCLStype, Boolean needRowid, OciRowidDescriptor& rowidDescriptor)
at System.Data.OracleClient.OracleCommand.ExecuteScalar()
at Microsoft.SSMA.Framework.Generic.DbUtilities.SsmaDbCommand.ExecuteScalar()
at Microsoft.SSMA.Framework.Oracle.Collector.OracleObjectCollector.ExecuteScalarToInt(IDbConnection connection, String text)
at Microsoft.SSMA.Framework.Oracle.Collector.OracleObjectCollector.GetCountForExcludedSchemas(IDbConnection connection, IEnumerable`1 excludedSchemas, Int64 version)
at Microsoft.SSMA.Framework.Oracle.Collector.OracleObjectCollector.CountObjects(IDbConnection connection, Int64 serverVersion, OracleCollectionFilter filter, Set`1 excludedSchemas)
at Microsoft.SSMA.Framework.Oracle.Collector.OracleObjectCollector.CollectDataIntoMetabase(XMetabase xMetabase, IDbConnection connection, Int64 serverVersion, OracleCollectionFilter filter, IUIProgressBarProvider progressBarProvider, IUIStopOperationProvider
stopOperationProvider, ICollectionContext context)
at Microsoft.SSMA.Framework.Oracle.Collector.OracleObjectCollector.CreateMetabaseAndCollectData(IDbConnection connection, String xmlConnectionParameters, XNode xFilter, IUIProgressBarProvider progressBarProvider, IUIStopOperationProvider stopOperationProvider,
ICollectionContext context)

Hi Airings,
'ORA-00942: table or view does not exist'
According to the error message, it seems that the migrating table or view does not exist in the database, or SSMA does not have access to it. To troubleshoot the issue, please check the following things.
1. Verify that if the spelling of the table or view name is correct.
2. If the table or view exists but is in a different schema from the current schema where the SQL is executing (in other word, the table doesn’t own by you, but owned by other user), the ORA-00942 error will return too. Resolve this by
explicitly reference the table or view by specifying the schema name (schema_name.table_name).
3. SSMA queries some additional catalog tables that you may not have permission to, please make sure that you grant the account permission to
read sys.mlog$. For more details, please review this similar thread:
Bug in SSMA For Oracle 6.0 for non-dba Oracle user.
Reference:
ORA-00942 Table or View Does Not Exist Oracle Error
Thanks,
Lydia Zhang
Lydia Zhang
TechNet Community Support

Enterprise report TEMPLATE=0REPORT_DEFAULT_TEMPL does not exist

Similar Messages

Maybe you are looking for