Enterprise SecMgr: Can't add Database Schema Mapping to OracleDefaultDomain

Hello,
I'm trying to configure Enterprise Users (using a shared schema) and within EntSecMgr, I select...
Realms / MyID realm / Enterprise Domains / OracleDefaultDomain / Enterprise Roles / OracleDefaultDomain / Database Schema Mapping
and from there, I try to add the Directory Entry and schema. I don't get any errors when I click "OK", but the Database Schema mapping does not "take".
I notice the little icon next to OracleDefaultDomain (in ESM) has a "lock", so perhaps it's read-only? How can I change that, or where should I be assigning the Database Schema mapping, if not in the OracleDefaultDomain?

I never did figure out why I can't add the Database Schema Mapping to the OracleDefaultDomain, but I used ESM to add the schema mapping directly to the database itself, and now my Enterprise Users can login.

Similar Messages

How can I add an address map to each contact?

Hello:
When tapping a contact address in the Address application, the map view pops up and I can add a pin for the specific address. However, when I close the application the map disappears. I also notice that if I click on the lower right corner of the map screen, I see an option labeled "list."
I've got two questions:
1. What function does the list provide? (I've tried looking in the user's guide and there is no mention of this feature.)
2. Can I permanently store the map for each contact on my iPod, or does it need to reload each time using wi-fi?
Thanks.

its going to have to reload the map each time, it can't save it.

HT5557 Can I add an interactive map as a widget? So I can zoom in and out of the map pin?

I would like to add an interactive map as a widget to my ibook photos to show where the photo was taken. Is this possible or will I have to add a cropped image of the map?

Perhaps this will help:
iBooks Author: About HTML widget creation
Regards.

Can't add database field or text object to a report (new and existing)

We have Crystal Report 8.5 and when trying to modify an existing report or create a new report, I can't seem to add any database fields or text objects in my report. I get a prohibition symbol (circle with a backslash inside it) when I hover over the report. Has anyone encoutered something like this? Any suggestions? Thank you.

Do you have two monitors?
I had this problem if I tried to open crystal in the second monitor, move it back to primary monitor and it should be OK.
Ian

Can't "add" to port mapping

I am using an airport Extreme base station, and I am trying to enable Port forwarding for use with a Slingbox. However, when I go to the port mapping tab of the Airport Admin Utility the "Add" button (right side of the window) is grayed out. Can anyone help me? Why is it gray and not active?

The extreme is hooked up to a cable modem.
Is it a modem only or is it a modem/router combination? If it is a modem only I don't know why your AEBS has the option to distribute IP addresses DISABLED. In that mode you only have one IP address to use so only one device at a time can connect to the Internet.
...I want to hook up the sling box, and I am not sure what I need to hook that into, the Express or (AEBS).
You can ONLY connect it to the AirPort Express (AX) if you configure the AEBS and AX to connect wirelessly using WDS. This causes the AX's Ethernet port to be active for the sling box. However using WDS cuts your available wireless bandwidth in half.
Therefore I think i need this work around, is that correct?
No

Can't add database to ASP Javascript page?

If I make a page with document type of ASP javascript the option to add a db connection is grayed out even though the site, type and server onumbers have checks by them. Do the same thing with doc type of ASP VB script and I can add db. I don't believe I used to have this problem before.
Any ideas on what I'm doing wrong would be appreciated. Thanks.

Arrrgghhh!!!! But thank you for replying and letting me know.

How do I make embedded OC4J use IBM Db2 schema mapping

I am using JDeveloper 903 with a datasource which happens to be of type IBM DB2. Whenever, I try to deploy and test an entity bean from withinn JDeveloper, the embedded OC4J seems to be using a different database schema mapping scheme than what is required by IBM DB2. As a result of this OC4J tries to autocreate tables with wrong syntax and obviously fails. Can somebody tell me how do I get things setup correctly.
TIA
Vimal

Magnus,
The optimizations related to efficiently supporting overflow-style caching are not included in Coherence 3.5. I created COH-2338 and COH-2339 to track the progress of the related issues.
There are four different implementations of the PartitionAwareBackingMap for Coherence 3.5:
* PartitionSplittingBackingMap is the simplest implementation that simply partitions data across a number of backing maps; it is not observable.
* ObservableSplittingBackingMap is the observable implementation; it extends WrapperObservableMap and delegates to (wraps) a PartitionSplittingBackingMap.
* ObservableSplittingBackingCache is an extension to the ObservableSplittingBackingMap that knows how to manage ConfigurableCacheMap instances as the underlying per-partition backing maps; in other words, it can spread out and coalesce a configured amount of memory (etc.) across all the actual backing maps.
* ReadWriteSplittingBackingMap is an extension of the ReadWriteBackingMap that is partition-aware.
The DefaultConfigurableCacheFactory currently only uses the ObservableSplittingBackingCache and the ReadWriteSplittingBackingMap; COH-2338 relates to the request for improvement to add support for the other two implementations as well. Additionally, optimizations to load balancing (where overflow caching tends to get bogged down by many small I/O operations) will be important; those are tracked by COH-2339.
Peace,
Cameron Purdy
Oracle Coherence

Elements 11 vs 13: how can I add a new place tag to my PSE13 database without using the wretched and totally inadequate map technology that Elements 13 wants to impose.

HI,
I have recently installed Elements 13 having used Elements 11.0 successfully to build a database of 30,000 plus images indexed by place, people, and photo date. Elements 11 allowed me to add new places which are meaningful to me but which are a complete mystery to the mapping technology of Elements 13. For example some years ago I lived in London in a road called Argyle Road. In elements 11 I could enter the place tag as Argyle Road. In Elements 13 I am required to locate Argyle Road on the map, but the map presupposes that the Argyle Road I am referring to is in Ealing in West London. It is not!
I now live in a place called Broadsands but the Elements 13 Map places this 0.5 miles away from what I would describe as Broadsands.
So the question: how can I add a new place tag to my database without using the wretched and totally inadequate map technology that Elements 13 wants to impose.

Thank you for your quick response, BalusC. I really appreciate your answer.
Yes, you are right. If I manually code the same amount of those components in the JSF pages instead of generating them dynamically, the server will still run out of memory. That is to say, JSF pages might not accommodate a great deal of concurrent visiting. If I upgrade the server to just allow 1,000 teachers making their own test papers at the same time, but when over 2,000 students take the same questionnaire simultaneously, the server will need another upgrading. So I have to do what you have told me, using JS+DOM instead of upgrading the server endlessly.
Best Regards, Ailsa

Can't access tables in other Oracle database schemas

Hi. We got our Oracle database admin to install APEX in our Oracle database. She created a login and schema for my Oracle database user so that I could work with APEX a little. Here's the information on the version of APEX we have installed:
Database Version Information
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
PL/SQL Release 11.2.0.2.0 - Production
CORE 11.2.0.2.0 Production
TNS for IBM/AIX RISC System/6000: Version 11.2.0.2.0 - Production
NLSRTL Version 11.2.0.2.0 - Production
I've found that my user is only able to access Oracle tables within my own Oracle database schema. Most of our main tables are in 3 other schemas and I'd need access to all tables in all these schemas. Right now whenever I encounter a drop list of values for Schema, only by own schema is available in the list of values.
Is there something our Admin can do to make these tables in other schemas available to my user account?

Sharpe,
This documentation should point you in the right direction. It will show you how to add multiple schemas to a workspace.
http://docs.oracle.com/cd/E23903_01/doc/doc.41/e21678/adm_mg_wrkspc.htm#CHDBDCCJ
Cheers,
Tyson Jouglet

How can I use a mySQL database schema with numeric auto increment primary key instead of GUID?

Hello!
I'm using the TestStand "MySQL Insert (NI)" database schema with GUID as primary key. So everything works fine.
But I prever using numeric values as primary key, because the database is in conjunction with another database which uses numeric values as primary key.
Is this possible?
Has anyone an idea how I can modify the "Generic Recordset (NI)" for use with MySQL?
Thanks!
Configuration:
Microsoft Windows XP
TestStand 3.1
MySQL 4.1.12a
MySQL ODBC 3.51 Driver
Brosig

Adam -
The TestStand Database Logging feature does not allow you to run a separate SQL command after executing the command for a statement(table), so I do not think that you can use an auto incrementing column for the tables. There is just no way to get it back in a generic way. One option that I tried is something similar to the Oracle schema where you call a store procedure to return a sequence ID for each record that you want to add.
So you would have to create the following sequence table in MySQL:
CREATE TABLE sequence (id INT NOT NULL);
INSERT INTO sequence VALUES (0);
Then create a stored procedure as shown below that will increment the sequence value and return it in a recordset:
CREATE PROCEDURE `getseqid`()
BEGIN
        UPDATE sequence SET id=LAST_INSERT_ID(id+1);
        SELECT LAST_INSERT_ID();
END
Then update the MySQL tables to use INT primary and foreign key values, so the TestStand MySQL SQL file to create all tables would have text like this:
CREATE TABLE UUT_RESULT
ID    INT PRIMARY KEY,
~
CREATE TABLE STEP_RESULT
ID    INT PRIMARY KEY,
UUT_RESULT   INT NOT NULL,
~
Then update the schema primary and foreign key columns in the TestStand Database Options dialog box to be INT to match the table. For the primary key columns, you will have to set the Primary Key Type to "Get Value from Recordset" and set the Primary Key Command Text to "call getseqid()". This will call the stored procedure to determine the next value to use as the ID value.
Hope this helps...
Scott Richardson
National Instruments

Mapping UML Model to Database Schema

Hi All,
Is it possible to map UML business object model on database schema using Mapping Workbenck? I've done the mapping with imported java classes, but wodering if same could be done with the UML models. I couldn't find any documentation about it either. This feature may be very useful in cases where you want to incorporate TopLink in the design stages of a project.
Any help will be highly appreciated. Thanks.

Hi Sharad,
I agree that incorporating design time practices into this tool might be useful, but is not supported as you described.
From the perspective of application development, I find it useful to first develop the object model in an IDE such as JDeveloper which supports UML (Which will automatically allow you to deploy the .class files of the project). I point my MW project to the output location of my .class files which seems to work great as I can make changes to the object model in the IDE and easily refresh the contents in the MW.
I hope this helps.
Darren

How can let oc4j use my database schema file?

I wrote a mysql.xml in config\database-schemas.
But when I deploy a ejb application, It reported:
2005-2-20 4:11:03 com.evermind.server.Application getDatabaseSchema
Warning: Exception occurred getting database schema. Exception: java.sql.
SQLException: Can't call commit when autocommit=true
2005-2-20 4:11:04 com.evermind.server.Application getDatabaseSchema
Warning: Warning: Exception occurred getting database schema. Exception: java.sql.
SQLException: Can't call commit when autocommit=true
05/02/20 04:11:05 Auto-deploying - compiling and loading...
Note: Some input files use or override a deprecated API.
Note: Recompile with -deprecation for details.
05/02/20 04:11:22
Auto-creating table: create table Student_ejb1_ejb1 (id BIGINT not null primary
key, name SET(255) null)
05/02/20 04:11:22 Error creating table: You have an error in your SQL syntax; ch
eck the manual that corresponds to your MySQL server version for the right syntax....
Do I need write schema property in data-sources.xml?

To the data-sources.xml configuration file add a datasource element for MySQL. In the schema attribute set the schema file to database-schemas/mysql.xml.
<data-source
    class="com.mysql.jdbc.jdbc2.optional.MysqlDatasource"
    name="OracleDSâ
    schema="database-schemas/mysql.xml"
    location="jdbc/mySQLCoreDS"
    xa-location="jdbc/xa/mySQLXADS"
    ejb-location="jdbc/mySQLDS"
    connection-driver="com.mysql.jdbc.Driver"
    username=""
    password="â
    url="jdbc:mysql://localhost/test"
    />

How can I connect to a different database schema,other than adobe?

I'm building an application where I want to use a different database for it,for storing additional data for the users(different from "edcprincipaluserentity" table in "adobe" database stores)..How I can connect to my database schema created in MySQL from Workbench,to assign tasks to my users,using the Process Management/Assign Task service?

You can only assign task to user that are known by the LiveCycle User Manager.
When you configure LiveCycle, you can tell it where you want to get the users from. They can be created them locally in the local database, or synchronized from an LDAP directory in which case it'll read the users from LDAP and make a copy of some of the properties to the internal LiveCycle database.
Bottom line, all users have an id (in the edcprincipalentity table) in the adobe database.
If you need your users to come from a different database, then you need to customize the SPI (security provider interface) so that you can synchronize the users coming from your external database. Again, this is a customization since out of the box, we don't synchronize against external database. But it is possible, the API is there and other customers have done it.
I hope this clarifies things a bit.
Jasmin

How can I add a header to a text file without mapping? [Using only ID]

Hi Experts,
I am doing a scenario in which I want to add a dynamic header to a text file, due to the complications related to the structure, I dont want to create a message type, data type etc so I cant use mapping.
I want to do all the manipuations in Integration Directory itself.
Can you all please help me out in this?
Thanks in advance
Thomas

Hi Experts,
I am new to XI, so only elaborate answers would help me
This is the specific requirement i want;
There is a 'source text file' which is a collection of 1000+ records, I want to make a 'target file' which is a combination of 2 fields, one field will be the dynamically generated name [for the target file] and the other field will be the whole 'source file' content.
From the last response for my question, I understand the dynamic file generation part can be done using java mapping.
Is there anyway by which I can get in the whole content of the source file into a field in the target file?
Thanks in Advance
Thomas

How can I find the schemas used in a database? Any system table contains?

How can I find the schemas used in a database?
Any system table contains?
I would like to know sql statement (dictionary object name) which tells the all schema s in a database like dba_users.

Hello,
this SQL should help:
db2 "select schemaname from syscat.schemata"

Enterprise SecMgr: Can't add Database Schema Mapping to OracleDefaultDomain

Similar Messages

Maybe you are looking for