Enterprise service in Visual Composer

When i click on Search Task Panel toolbar and select service registry as the search criterion,I get a pop up stating...
unable to receive classifications from UDDI registry,Please change UDDI server settings.
Have ne one of u come across a similar situation??
solution??

Did you correctly define the services registry in NetWeaver Administrator?
If you correctly configure the services registry and a physical destination for the services registry in NetWeaver Administrator, then you should be able to access it from within Visual Composer.
You can follow the instructions here for the physical destination: http://help.sap.com/saphelp_nwce10/helpdata/en/45/635dd614d73bdbe10000000a1553f7/frameset.htm
And the instructions here for the services registry: http://help.sap.com/saphelp_nwce10/helpdata/en/45/c1ea61a1194432e10000000a155369/frameset.htm

Similar Messages

Unable to consume Enterprise services from Visual Composer

Hi,
We have implemented ECC-SE 603 add-on in our ECC 6.0 system.
We configured to set up a connection between our J2EE engine and the ES Workplace, to consume the Enterprise services from Visual Composer.
But, we are unable to see the Enterprise Services in the Visual Composer.
Kindly, let us know how to resolve this issue.

Hi,
please refer the following link
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a160392c-0e01-0010-7784-9cc564d871d2
Regards
Manohar

No access to Enterprise Services via Visual Composer

Hi,
I've configured the new landscape of EsWorkplace (HU2/800) in the Visual Administrator.
After I start the Visual Composer and log in I get the list of Enterprise services normally, but when I click on the Enteprise Service to get the Data service to model in the story board, nothing happens and I can't get the Data service.
Can anybody help in this issue?

Hi Ghosh,
I had used fine the EsWorkplace environment until the update of the landscape, when the system id was FU2. I used the Enterprises Services directly in Visual Composer and used in the NetWeaver Developer Studio by CAF Services too.
When SAP changed the landscape (system id HU2) I received another password for my userid.
I changed my WebService Security in the Visual Administrator and when I started the test, I see that I don't get to use the Enterprise Services directly in the Visual Composer.
The applications that I created in the Developer Studio still work fine, but When I select the button "Find Data", select the HU2 system , and select the search button the result is showed at the screen , but when I click on the Enterprise Service nothing happens, and I can't get the Service for model at the Story board.
thanks,
Márcio

Stored Procedure For Web Service in Visual Composer 7.1

Hello,
I want to use stored procedure for Webservice in Visual Composer 7.1
I can find this Web service but not supported. ( ex) prcreleased_test - Not supported )
Log.
Message: Error in connection - Can' t execute Web service.
Date: 2008-07-01
Time: 16:41:43:906
Category: com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent
Location: com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.processExecution:
Application: sap.com/test~kmshim_wf_impl
Thread: HTTP Worker [1]
Data Source: j2ee\cluster\server0\log\defaultTrace_00.trc
Correlator ID: 240496500000034715
Argument Objects:
Arguments:
DSR Component: n.a.
DSR Transaction: cb4b3560473711dd9fb4001e4f3b8fcb
Log2
Message: Stopped further execution since the interpreter is unusable
Date: 2008-07-01
Time: 16:41:43:906
Category: com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent
Location: com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.XGLInterpreter
Application: sap.com/test~kmshim_wf_impl
Thread: HTTP Worker [1]
Data Source: j2ee\cluster\server0\log\defaultTrace_00.trc
Correlator ID: 240496500000034715
Argument Objects:
Arguments:
DSR Component: n.a.
DSR Transaction: cb4b3560473711dd9fb4001e4f3b8fcb '
Help me^^ plz..

Hi Tanna.
Thanks for your reply^^
I create webservice that access my stored procedure.
But not supported.
http://dmp.humaxdigital.com/HumaxCmdwService/Service1.asmx?wsdl
There are two service. (Hello World - Test, prcrelease_test - Stored Procedure )
'Hello World' is supported but prcrelease_test is not supported. I can't drag to storyboard.
Our company's DB is MSSQL2005.
please help me^^

Consuming Web service in Visual Composer

Hi All,
I have impoerted a z bapi in caf service .I create a web service out of this and try to consume this in Visual Composer .When i do Test data service by right clicking onthe web service and try to execute the web service i get an error saying that , web service could not be executed.
But if i do the same thing for the standard bapi , i get the results .
Could any one help me out.
As well as for some of the webservice (on exposing core services as web services),i try to execute in the wsnavigator ,i get error sayin that ,internal operation not mapped with the external service ,even though i have done the mapping in the caf.

divya,
You have to map your web service to the rfc in your destination systems
goto http://servername:50000/caf
Choose your Web Service from the External Services list,
on the right side choose your remote function calls and select the service then click map.
Regards,
Ahmed Salah

Query regarding calling web services in Visual Composer

Hi Experts,
I am thankful for your help for posting this link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e017128
I am following the same steps but I am unable to find the system in visual composer after creating it in portal.
I got another document also related to it...
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ceea45f3-0c01-0010-049c-c2b001f590fb
But in this document when I am giving the WSDL URL name its not accepting. It is showing as invalid.So I am unable to proceed forward. Please help soon...
Regards
Nutan

Hi Nutan,
Try to define the web service system directly in the portal. Through VC you can encounter problems.
Regards,
Natty

Cannot see created Web Service in Visual Composer Search

I am following the example of chapter 2 of the book"SAP Netweaver Composition Environment". I am trying to search for a web service that has been created, but I cannot find it.
I created a logical destination for the service, named EDMProjectDestination, using nwa->Configuration Management->Infrastructure->Destinations. This was OK, but when I try to search for it in the Visual Composer environment, it does not appear on the list after a refresh or even a system reboot.
Also, when I go back to the Web Services navigator, and try to search by Logical Destination, I am told that there are no logical destinations configured.
Can somebody please inform me what mey be missing here?
BR,
Tony.

Hi,
That did it, thanks!
This is a completely different location to that specified in the book.
BR,
Tony.

Consume abap based web Service in Visual composer 7.0

Hi All,
Can any one provide me sample example or PDF on "consume abap based web Service in Visual 7.0 composer" not WSDL based
Help will be appricated by awarding point.
Thanks

Hi,
Try the below link.
Consuming WebService in Visual Composer-1
Hope it helps...
Regards
Basheer

Web Services in Visual Composer

Hi,
I've created several Web Services in the NWA under SOA Management > Destination Template Configuration.
I added the CurrencyConverter WS with no authentication [http://www.webservicex.net/CurrencyConvertor.asmx?WSDL]
I also added a WS from our ERP system (the URL from SOAMANAGER transaction in R3) with basic HTTP user authentication.
This is giving me the following error in VC when I try to load the services: Could not complete search, Check log for more information.
1) Where do I check this mystical log? If it's the one I can access under tools, I can't retrieve that either due to errors.
2) Without the log, any ideas why I'm not able to call web services?
Regards,
Frederik-Jan

Srinivasan,
Yes, all these settings had previously been checked and so forth. Everything is set up correctly according to whatever guides. SAP hasn't found anything bad with our systems either apparently. However we still get that Internal Server Error 500 each time we try to access the UDDI_DESTINATION ...
Even in Global Settings it's now set to bypass the Proxy at all times when accessing anything on our domain. It still gives the same error ...
New URL for those settings appears to be http://help.sap.com/saphelp_nwce10/helpdata/en/45/c1ea61a1194432e10000000a155369/frameset.htm by the way The one you gave is for the old NWA
Kind regards,
Frederik-jan

Accessing enterprise services...

Hi All,
I'm working on EP6SP12, Visual Composer 6.0.
Can any one suggest me how to access the Web/Enterprise services through Visual Composer? means, which kind of system I should create inside portal so that I can access the applications exposed as Web Services?
Thanks and Regards,
Mausam

Hi Scott,
Thanks a lot for the answer.....
But during SAP Technology Tour at Bangalore, Ivo Totev had shown the functionality. I think it may not have been released yet.
Can you suggest some documents which gives features of current version of VC??
Thanks again,
Regards,
Mausam

What r the services can be imported in visual composer

Hi all,
Can anyone tell me wht are the services can be imported in VC.
And can i import XI interface as service into visual composer??
and also plz tell me how to import a service into visual composer and also how to integrate different systems to that.
Thanx,
Kalyan....!!

Hi Kalyan,
Chech this PDf by nicole goldman,
Its an excellent piece of information to show u how to consume a wwebservice using VC.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90f8a753-f03d-2a10-5fb0-f14b085b4cb2
and here is a very good one for consuming enterprise services in VC
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/605303db-9d5f-2a10-e0a2-c0e1c8af9e96
Reward points if u found it useful

BPM TOOL, what is Visual Composer Vs any other BPM Tool

Could you please share information regarding using a modeling tool to author business process [as-is/to-be]
ours is new implemantation and we already own sap business suite software, and our implementation /configuration Team is considering of using a bpm tool to do capture the processes.
my question is what leverage can we take of Visual Composer ? when compared with other BPM Tool.

If you have license for SAP Suite, then there is lot of things you can leverage with VC than it being useless if otherwise.
1. You can combine the output from the quick design and code free modeling environment of Visual Composer with the output from a full coding environment like Web Dynpro ABAP or BSP? Actually you can do just such a thing thanks to Portal Eventing. You can trigger event from VC. Yes, you can combine ABAP and VC
2. You can extend Visual Composer through Web Services
3. You can do an MDM integration in VC - combining data from varied sources
4. You can build a Web Services Based Visual Composer Application. Visual Composer has the capability to easily link to and consume a web service from within the SAP NetWeaver Visual Composer storyboard.
Also, if you are using BSP, these applications can be linked into a Visual Composer application. The linking is done via portal eventing. Linking these two technologies into a single application with receiving and parsing the Visual Composer event string from within ABAP.
5. SAP has released 300+ Enterprise Services and there are many ways to consume these. A BPX can use Visual Composer and the Composite Application Framework (CAF) to consume SAP Enterprise Services using MDD - Model drived development.
6. SAP NetWeaver Visual Composer users can develop rich graphical interfaces that extend current investments in their SAP NetWeaver infrastructure by using Flex technology (colloboration with Macromdeia) , and businesses can gain credible, clear and comprehensive business insights through new analytics solutions. There are 100+ IS specific Analytic Applications.
With the new improvements in VC 7.0 it is very clear that the future benefits align and will be much more leveraged with Visual composer
Hope this helps
Cheers
Senthil

Reg;visual composer

I am new to Bi 7, i want to know about visual composer, how to desgin reports, why the clients go for VC and what could be the requirement of them since we have query designer
points will be assigned.
Regards
Chaithanya

Hi Veera...
Below links will helps you to get all the info...
Visual Composer produces applications in a declarative form, thereby enabling completely code-free execution mode for multiple runtime environments. It provides full application lifecycle support by maintaining the connection between an application and its model throughout its lifecycle. Visual Composer is designed with an open architecture, which enables developers to extend its design-time environment and modelling language, as well as to integrate external data services.
As a result, Visual Composer modelers increase productivity by reducing their development effort time from weeks and months to days. Domain experts gain the means to express their requirements directly rather than conveying them to developers. This narrows the gap between application definition and implementation.
Starting with a blank canvas, the Visual Composer user draws the application in Visual Composer Storyboard (workspace), without writing a single line of code. Since no traditional programming skills are needed, business process experts can prototype, design and produce entire applications.
A typical workflow for creating, deploying and running an application using Visual Composer is:
Create a model
Discover data services and add them to the model
Select necessary UI elements and add them to the model
Connect model elements to define the model logic and data flow
Edit the layout
Arranging the UI elements and the controls of the application on forms and tables.
Deploy the model
This step includes compilation, validation and deployment to a selected environment.
Run the application
The application can run using different runtime environment (such as Adobe Flex and HTML)
Visual Composer Design board : The model contains a form in which the user enters data, a data service that receives the input values, and an output table that displays the results returned by the data service.
Visual Composer Layout board : The application contains a Search input form with an input field and a button that transfers data to the data service. The data retrieved from the data service is displayed in the Results table.
The application generated by Visual Composer : Visual Composer used Adobe Flex as a runtime in this screenshot, generated the application and integrated it into SAP Enterprise Portal
https://www.sdn.sap.com/irj/sdn/nw-vc
http://help.sap.com/saphelp_nw04/helpdata/en/fd/4a7e40417c6d1de10000000a1550b0/content.htm
https://www.sdn.sap.com/irj/sdn/visualcomposer?rid=/library/uuid/16244247-0a01-0010-3294-d81c21e7e86e
Regards
Sudheer
Edited by: sainathsudheer on Feb 2, 2009 9:46 AM

Problem with the Browsing of Services Registry in Visual Composer

Hi,
I have tried to connect Visula Composer of CE 7.1 to the Services Registry for ES Workplace by configuring 3 Web Service destination on my local server:
1. UDDI_DESTINATION
2. CLASSIFICATION_DESTINATION
3. Backend destination "HU2"
as stated in the tutorial "How to Browse an Enterprise Services Registry in Visual Composer" (https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/605303db-9d5f-2a10-e0a2-c0e1c8af9e96&overridelayout=true).
After the configuration, I opened up the "Search" dialog in Visual Composer and selected "Service Registry" for the "Search in" drop down list and then clicked on the link "Advanced Search". An error message "XMSG_COULD_NOT_LOAD_CLASSIFICATIONS" was then displayed. I have tried to google the error message but to my surprise there wasn't even a single result for that.
Could anyone please help me on this?
Thanks in advance.
Regards,
Joon Meng

Hi Mike,
Thanks for your reply. It is actually my intention to try out with the Services Registry for ES Workplace. The thing is, I was able to connect my NWDS to the SR, but not in Visual Composer.
Below are the URLs for both destination.
1. UDDI_DESTINATION: http://sr.esworkplace.sap.com/uddi/wsdl/uddi_v3_service.wsdl
2. CLASSIFICATION_DESTINATION: http://sr.esworkplace.sap.com/ClassificationService/CS?wsdl
I tried to open the first URL in my browser and a WSDL document was displayed, but for the second URL an error message "503 Service Unavailable" was returned.
Does this mean that the second URL "http://sr.esworkplace.sap.com/ClassificationService/CS?wsdl" might be the cause of the problem?
Regards,
Joon Meng

Creating web service system for Visual Composer

Hello,
I seem to have made some changes that made my unable to create web service systems for Visual Composer.
The change I made is in NetWeaver Administration > Configuration > Application Resources > WebServicesFactory, I added the Configuration Property "UseCacheByDefault" with Boolean value = true.
After this, if I create a web service system in Enterprise Portal, the Connection Tests fail. In Visual Composer when I define a web service system, the error I am getting is: "Connector Factory not found for value WebServicesFactory".
I have tried to delete the UseCacheByDefault property I added as well as restart the server but I am still getting the error.
However when I test my web service using the Web Services Navigator, I am not getting any problems. So my guess is the problem lies with the connection factory.
Can anyone help me with this issue?
Thanks.

Hello,
Since creating WS system in the portal resulted with failed connection test, the issue has nothing to do with VC.
I'm just guessing, but try to configure proxy in the J2EE engine.
If that doesn't help I suggest you raise this question in the portal forum.
Best regards,
Shay

Enterprise service in Visual Composer

Similar Messages

Maybe you are looking for