Enterprise Services, Service Operations and Functional Business Component
Hi,
in the Enterprise Service desing guide (see https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/40c05360-0501-0010-63bd-aedd415b6e05 ) the relations between Enterprise Services and Service Operations are covered.
I understand that one Enterprise Service consists of one or more Service Operations. For Example General Ledger Processing ES offers seven Service Operations. (See Solution Composer)
Functional Business Components offer one or more Enterprise Services and several Service Operations. As mentioned in the Design Guide, an Enterprise Services is dedicated to a certain Functional Business Component. An Enterprise Service could use several Service Operations of one ore more Functional Business Components.
When browsing the Solution Composer I couldn't discover any Enterprise Service that uses Service Operations of more than one Functional Component.
Here's my question: Does anyone know an Enterprise Service described in the Solution Composer which uses Service Operations of several Functional Business Components? If there aren't any, why?
Regards,
Sebastian
Sebastian,
I haven't looked through the entire set of preview services, but most of what I have seen is consistent with what you are describing. I think the short answer is the ESA preview system is really a pre-release of the intial ESR which itself is essentially an extension of XI's integration repository. These are basically the finer grained object and interface level services.
SAP should be releasing some significant content updates to this ESR after NW2004S goes GA later this year. More importantly the next edition of the ESR tied to the BPP release will greatly expand on the scope including containing the more complex service defintions and process models which cut across components that you are looking for.
Similar Messages
-
Unable to Enterprise Service Repository and Intergration Directory in SAP PI 7.1
Hello Experts,
I am unable to open Enterprise Service Repository and Integration Directory in SAP PI. The error displayed while opening the tools is "Can not find Message File". I have tried installing Java versions from 1.5 to 1.7 .Also all the Host and Services files entry are correctly pasted in drivers--> etc--> folder. But still the problem persists... Would request you help me on this so that i can start my work. Please find the below error screen shot... Thanks a lot in advance.
Best Regards,
Prashanth Bharadwaj.ChHi All,
As per your previous conversation,If java is installed properly a pop up window will be opened. I have typed JAVAWS in run command. Please the below screen shot. Even the problem persists.. Kindly help. Thanks a lot in advance
Best Regards,
Prashanth Bharadwaj.Ch -
Unable to execute service SS_GET_PAGE and function getRssFeedForUrl.in ucm
When i update rss feed information i am unable to update the rss logo getting the below error
Unable to execute service SS_GET_PAGE and function getRssFeedForUrl.
$ucmapp41: !csUserEventMessage,anonymous,portalcmd1.bb.wan:8055!csFileServiceUserAgent,Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; InfoPath.2; MS-RTC LM 8; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729),GET!csServiceDataException,SS_GET_PAGE,getRssFeedForUrl!$!csSystemError,www.google.com!syExceptionType2,intradoc.data.DataException,www.google.com!syExceptionType2,java.net.UnknownHostException,www.google.com
intradoc.common.ServiceException: !csServiceDataException,SS_GET_PAGE,getRssFeedForUrl!$!csSystemError,www.google.com
at intradoc.server.ServiceRequestImplementor.buildServiceException(ServiceRequestImplementor.java:1760)
at intradoc.server.Service.buildServiceException(Service.java:1997)
at intradoc.server.Service.createServiceExceptionEx(Service.java:1991)
at intradoc.server.Service.createServiceException(Service.java:1986)
at intradoc.server.ServiceRequestImplementor.handleActionException(ServiceRequestImplementor.java:1460)
at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1427)
at intradoc.server.Service.doAction(Service.java:452)
at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1201)
at intradoc.server.Service.doActions(Service.java:447)
at intradoc.server.ServiceRequestImplementor.executeSubServiceCode(ServiceRequestImplementor.java:1071)
at intradoc.server.Service.executeSubServiceCode(Service.java:3568)
at intradoc.server.ServiceRequestImplementor.executeServiceEx(ServiceRequestImplementor.java:942)
at intradoc.server.Service.executeServiceEx(Service.java:3563)
at intradoc.server.ServiceRequestImplementor.executeSafeServiceInNewContext(ServiceRequestImplementor.java:973)
at intradoc.server.Service.executeSafeServiceInNewContext(Service.java:3558)
at intradoc.server.script.ServiceScriptExtensions.evaluateFunction(ServiceScriptExtensions.java:259)
at intradoc.common.DynamicHtmlMerger.computeFunction(DynamicHtmlMerger.java:1209)
at intradoc.common.DynamicHtmlMerger.evaluateGrammarElement(DynamicHtmlMerger.java:825)
at intradoc.common.DynamicHtmlMerger.substituteVariable(DynamicHtmlMerger.java:597)
at intradoc.common.DynamicHtml.substituteVariable(DynamicHtml.java:1244)
at intradoc.common.DynamicHtml.outputHtmlEx(DynamicHtml.java:986)
at intradoc.common.DynamicHtml.outputHtmlEx(DynamicHtml.java:1006)
at intradoc.common.DynamicHtml.outputHtmlEx(DynamicHtml.java:1050)
at intradoc.common.DynamicHtml.outputHtmlEx(DynamicHtml.java:1086)
at intradoc.common.DynamicHtml.outputHtml(DynamicHtml.java:906)
at intradoc.common.DynamicHtmlMerger.executeDynamicHtmlToWriter(DynamicHtmlMerger.java:1818)
at intradoc.common.DynamicHtmlMerger.evaluateScriptToWriter(DynamicHtmlMerger.java:1645)
at intradoc.common.DynamicHtmlMerger.evaluateScriptNoErrorHandling(DynamicHtmlMerger.java:1615)
at intradoc.common.DynamicHtmlMerger.evaluateScriptEx(DynamicHtmlMerger.java:1573)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:592)
at sitestudio.SSClassHelper.invokeRaw(Unknown Source)
at sitestudio.SSClassHelper.invoke(Unknown Source)
at sitestudio.SSScriptExtensions.evaluateIncludeXmlEx(Unknown Source)
at sitestudio.SSWCMScriptExtensions.evaluateTemplate(Unknown Source)
at sitestudio.SSWCMScriptExtensions.getPlaceholderContent(Unknown Source)
at sitestudio.SSWCMScriptExtensions.evaluateFunction(Unknown Source)
at intradoc.common.DynamicHtmlMerger.computeFunction(DynamicHtmlMerger.java:1209)
at intradoc.common.DynamicHtmlMerger.evaluateGrammarElement(DynamicHtmlMerger.java:825)
at intradoc.common.DynamicHtmlMerger.substituteVariable(DynamicHtmlMerger.java:597)
at intradoc.common.DynamicHtml.substituteVariable(DynamicHtml.java:1244)
at intradoc.common.DynamicHtml.outputHtmlEx(DynamicHtml.java:986)
at intradoc.common.DynamicHtml.outputHtml(DynamicHtml.java:906)
at intradoc.common.DynamicHtmlMerger.outputDynamicHtmlPage(DynamicHtmlMerger.java:1769)
at intradoc.server.Service.buildResponsePage(Service.java:1199)
at intradoc.server.Service.doResponse(Service.java:1868)
at intradoc.server.FileService.doResponse(FileService.java:1412)
at intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:664)
at intradoc.server.Service.doRequest(Service.java:1707)
at intradoc.server.ServiceManager.processCommand(ServiceManager.java:359)
at intradoc.server.IdcServerThread.run(IdcServerThread.java:197)
Caused by: intradoc.data.DataException: www.google.com
at rssfeeds.RssHelper.getXmlHttpContentsAsString(Unknown Source)
at rssfeeds.RssServiceHandler.getRssFeedForUrl(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:592)
at intradoc.common.IdcMethodHolder.invokeMethod(ClassHelperUtils.java:617)
at intradoc.common.ClassHelperUtils.executeMethodReportStatus(ClassHelperUtils.java:293)
at intradoc.server.ServiceHandler.executeAction(ServiceHandler.java:79)
at intradoc.server.Service.doCodeEx(Service.java:490)
at intradoc.server.Service.doCode(Service.java:472)
at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1360)
... 47 more
Caused by: java.net.UnknownHostException: www.google.com
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:177)
at java.net.Socket.connect(Socket.java:524)
at java.net.Socket.connect(Socket.java:474)
at sun.net.NetworkClient.doConnect(NetworkClient.java:157)
at sun.net.www.http.HttpClient.openServer(HttpClient.java:388)
at sun.net.www.http.HttpClient.openServer(HttpClient.java:523)
at sun.net.www.http.HttpClient.<init>(HttpClient.java:231)
at sun.net.www.http.HttpClient.New(HttpClient.java:304)
at sun.net.www.http.HttpClient.New(HttpClient.java:321)
at sun.net.www.protocol.http.HttpURLConnection.getNewHttpClient(HttpURLConnection.java:839)
at sun.net.www.protocol.http.HttpURLConnection.plainConnect(HttpURLConnection.java:791)
at sun.net.www.protocol.http.HttpURLConnection.connect(HttpURLConnection.java:716)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:960)
... 59 more
Any help is required
Thanks
SravaniHi Ryan,
Thanks for your reply.
Yes, I checked in the configuration manager and the DB (Logged into the DB and ran a query on Users) as well.
I can see the column name dPassword.
Thanks -
I am not much clear on "Create Operator" feature. It is interally bind the function.
So, what is difference b/t Operator and Function? Why we need to create operator becuase we can do same thing with Function.
Please clarify on same.
KG
:- Learn Together, Grow Together -:The "Create Operator" feature will allow you to extend the list of built-in relational operators (for example, +, -, /, *, LIKE, AND, OR) with domain specific operators (for example, Contains, Within_Distance, Similar).
-
Global Enterprise Services Operations
hi everybody,
can somebody please inform me about this GESO ( Global Enterprise Sevices Operations ) in terms of the duties, services, responsibilites, operations, purposes, functions and etc. I mean what kind of operations, services and processes are there in this department
and how are they conducted & executed ? What kind of business and jobs precisely are being done in GESO ? What should I clearly understand from Consulting sales and project management in this team ?
detailed info will be highly appreciated! a quick respond is better than anything !
many thanks for your valuable time and kind info !Hello,
The TechNet Wiki Forum is a place for the TechNet Wiki Community to engage, question, organize, debate, help, influence and foster the TechNet Wiki content, platform and Community.
Please note that this forum exists to discuss TechNet Wiki as a technology/application.
Since your post is off-topic, I am moving it to the
off topic forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}}) -
Enterprise Service Operation missing in VC 7.01
Hi all,
I have created a Enterprise service with two operations. When I test the enterprise service in the SOA Manager I see both operations in the webservice. When I use the same WSDL file in a systeem in VC I just get one operation.
Can someone tell me what the problem is?
Kind Regards,
RichardHi Radi
Thanks for your post.
Type "run programs made for previous versions of windows" in start menu search, if it gives any result as "Run programs made for previous versions of Windows" then you are able to run that application in compatibility mode through that.
Hope this helps you. If the problem continues please mention for which file types you are trying.
Thanks and Regards
Ananda.D -
Enterprise Service Bus and ESA
Hi ,
I like to know, how to realize Enterprise Service Bus in the Enterpise Servise Architecture?
Thanks in advance.
Regards
Lemin.hi there,
for an introduction have a look <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d86cf1a4-0701-0010-409d-c568b1d2519e">here</a>.
For more in-depth information search <a href="http://help.sap.com">SAP Help</a> for XI & BPEL, e.g. <a href="http://help.sap.com/saphelp_erp2004/helpdata/en/ce/1d753cab14a909e10000000a11405a/frameset.htm">this</a>.
hope that helps,
anton -
Link operation and functional locatio
According to this thread (PM Order - Functional Location and Equipments on Operations) it should be possible to link object list to operations in the Maintenance order.
Does anybody know if this functionality is also possible in 4.6c
regards peterSo that would mean that the field equipment and functional location in the operations tab are useless or am i missing something here? I can not imagine that.
Is there not some customizing enabling the fields? I've checked almost every PM customizing setting, but unfortunately can not find it. Dont want to surrender yet... -
CE -possible to combine different multiple enterprise services? and expose
can some one please let me know if there is any possibility to combine multple services into one and expose as a new service in CE 7.1/7.2?
You have multiple options:
1. Create a WSDL which has input similar to input of WS1 (only Region as input) and an output similar to output of WS3.
Create Proxy Service based on this WSDL. Then call all the thee business services one after the other and doing transformations/assigns as needed after each call. Finally map the result of BS3 to the similar output of your new WSDL on which the Proxy service is based.
2. Create an Any XML type of web service. Create a schema which has two elements, one for input and one for output. Input containing only Region and output containing all the details. All consumers need to send request according to input defined in schema and expect output defined in schema. Its similar to creating the WSDL but can be used in case your consumer do not want to call a Web Service but want to call an XML API over HTTP. Rest will be same as option 1.
Split join is needed to make calls in parallel, it wont be usable in your use case unless you expect a list og regions in the same request for each of which you need to gather same information by calling three services. -
Enterprise Service Repository and Registry
I am studying the SOA architecture and I thought that were the same things, but reading some docs, I understand it's not so.
Can anyone explain me pleas what are the differences between these two things?
Thanks
GabrieleHi Gabriele,
ESRepository is a container that holds all the objects that have been desingned and ready to be used as services .Where as Registry is a place we jus mention them as cataloge or menu so that we can discover the services that are available for the customer and make use of them by further navigation and subscribing.
Thanks,
Ram. -
How to map business process and enterprise service?
Recently, I read some documents about ESA. I'm confusing about the relationship between business process and enterprise service. In other word, how to map the business process to enterprise service after the business process is analyzed? Is there any methodology/rule to define business process and wrap them into service in ESA?
Hi Sherry,
I like to add some of my thoughts about that discussion. From my point of view ESA is much more than just another BPM or Enterprise BPM. ESA is adresses six key areas and I think all of them are really needed:
- <b>People Productivity</b> as the word itself describes...it's about portals and productivity.
- <b>Embedded Analytics</b> has to integrate transactional and analytical content.
- <b>Service Composition</b> is used for model-driven service composition and services orchestration.
- <b>Service Enablement</b> is about a Enterprise Services Repository filled with business meaningful Enterprise Services and service patterns for enabled objects. Excactly this is where SAP has years of experiences.
- <b>Business Process Platform</b> is about service enablement of all application platform objects and engines. This is the place where "BPM" for core business processes resits.
- <b>Life-Cycle Management</b> has to cover the deployment, configuration, operation and change management for ESA based processes.
Therefore the term "BPM" is located in serveral layers of an ESA approach. On the level of <u>Business Process Platform</u> BPM is providing the choreography for core business preocesses.
At <u>Service Enablement</u> BPM needs to compose out of granular services (I would say "atomic" services)
buiness meaningful services (here we have "molecular" services).
The third level where BPM could be used is <u>Service Composition</u> because exactly this is the place
where serveral Enterprise Services could be combined to a process representation.
To come back to the discussion:
1. The question should be how to indentify business meaningful services which could represent single process steps. ATP check, Credit card check, ... could be examples. In theory this service could be out-tasked, defined more flexible etc. This means that processes needs to be evaluated for Enterprise Service candidates. Afterwards you can check against SAP's Enterprise Services Repository for already existing Enterprise Services. The evalution for enterprise services candidates will be supported by the metodology mentioned by Kaj and David.
2. I think domains in this context should be motivated by business and/or functional areas. Depending on the granularity. For example Order Fulfilment Services, Master Data Services, Search Services... These kind of serices can be combined again to services such as "Search of Master Data" (Search Service + Read Master Data Service) etc. or can be used to generate UI to be used in a ESA application.
Your thoughts?
Very best regards
Wulff -
Functional / semantic description of Enterprise Services in ESW
Hello,
we are trying to use Enterprise Services from within the Banking Services by identifying the needed functionality via the Enterprise Service Workplace and then using it in our integration szenario.
While there are detailled technical descriptions for the service interfaces, we can´t find any functional / semantic description on how exactly the service works (precondition, postcondition, transformation etc.) and how it hast to be invoked.
This leads inevitably to functional errors when calling the service.
I´m not looking for the solution for a specific error, but for proper fuctional / semantic documentation on this services.
Can anyone help?
Greetings and thanks in advance,
Arne Schultz (Hamburg)Hi sudeep,
Please refer to the below article, It is said that
<i>SAP provides some 500 Web services through its Web site. Next year, the vendor plans to release a new version of NetWeaver, called the Business Process Platform, with a repository of built-in Web services</i>
http://www.informationweek.com/story/showArticle.jhtml?articleID=190900725
Regards
Sumit Bhutani -
Error - Unable to execute service and function
Hi all,
I created a sample component with service handlers but it is giving errors Unable to execute service GET_PURGE_LIST and function getPurgeList.
(System Error: The service method 'getPurgeList' is not defined.) Please let me know what changes to be made to fix this
Below are the files I used:
======================
ampfacpurgecontents_resource.htm
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
<title>
ServiceHandlerSample htmlIncludeOrString
</title>
</head>
<body>
<@dynamichtml custom_finish_layout_init@>
<$include super.custom_finish_layout_init$>
if (navBuilder)
if (isLoggedIn)
navBuilder.addChildNodeTo('MY_CONTENT', 'item', 'id==GET_PURGE_LIST',
'label=='+'Show Purge List',
'url==<$HttpCgiPath$>?IdcService=GET_PURGE_LIST');
<@end@>
</body></html>
===============================================
Services
======
servicehandlersample_service.htm
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
<title>
ServiceHandlerSample service
</title>
</head>
<body>
<@table ServiceHandlerSample_Services@>
<table border=1><caption><strong>Scripts For Custom Services</strong></caption>
<tr>
<td>Name</td><td>Attributes</td><td>Actions</td>
</tr>
<tr>
<td>GET_PURGE_LIST</td>
<td>DocService
0
PUTRGE_LIST_PAGE
null
null<br>
null</td>
<td>3:getPurgeList:GET_LIST:0:null</td>
</tr>
</table>
<@end@>
</body></html>
======================
service handler
============
servicehandlers_handlers.htm
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
<title>
ServiceHandlerSample htmlIncludeOrString
</title>
</head>
<body>
<@table SampleServiceHandlers@>
<table border=1><caption><strong>ServiceHandlers</strong></caption>
<tr>
<td>serviceName</td><td>handler</td><td>searchOrder</td>
</tr>
<tr>
<td>DocService</td>
<td>com.ameriprise.ServiceHandlerSample.getPurgeList</td>
<td>100</td>
</tr>
</table>
<@end@>
</body></html>
======================================================
ServiceHandlerSample.hda
<?hda version="10.1.3.3.3 (080807)" jcharset=UTF8 encoding=utf-8?>
@Properties LocalData
version=2013_09_25(build 1)
blFieldTypes=
ComponentName=ServiceHandlerSample
hasPreferenceData=false
blDateFormat=M/d/yy {h:mm[:ss] {aa}[zzz]}!mAM,PM!tAsia/Calcutta
@end
@ResultSet ResourceDefinition
4
type
filename
tables
loadOrder
resource
resources/servicehandlersample_resource.htm
null
1
resource
resources/servicehandlers_handlers.htm
SampleServiceHandlers
1
service
resources/servicehandlersample_service.htm
ServiceHandlerSample_Services
1
template
templates/servicehandlersample_template.hda
null
1
@end
@ResultSet Filters
4
type
location
parameter
loadOrder
@end
@ResultSet MergeRules
4
fromTable
toTable
column
loadOrder
ServiceHandlerSample_Templates
IntradocTemplates
name
10
SampleServiceHandlers
ServiceHandlers
null
1
@end
@ResultSet ClassAliases
3
classname
location
loadOrder
@end
========================
Java Class
package com.ameriprise.ServiceHandlerSample;
import java.util.*;
import java.io.*;
import java.net.*;
import intradoc.common.*;
import intradoc.data.*;
import intradoc.shared.*;
import intradoc.server.*;
public class GetPurgedList extends ServiceHandler {
public void getPurgeList() throws ServiceException, DataException
DataResultSet fullStockData = new DataResultSet(new String[] {"Sample Content",
"11111", "123", "Sept-25-13" });
String resultSetName = m_currentAction.getParamAt(0);
m_binder.addResultSet(resultSetName, fullStockData);
============================================================
Template
servicehandlersample_template.hda
<?hda version="10.1.3.3.3 (080807)" jcharset=UTF8 encoding=utf-8?>
@Properties LocalData
blFieldTypes=
blDateFormat=M/d/yy {h:mm[:ss] {aa}[zzz]}!mAM,PM!tAsia/Calcutta
@end
@ResultSet ServiceHandlerSample_Templates
5
name
class
formtype
filename
description
PUTRGE_LIST_PAGE
Document
null
purge_list_page.htm
null
@endHi Ashok,
In your servicehandlersample_service.htm the Service Class should be your package name and not DocService. Here is how it should be:
<@table ServiceHandlerSample_Services@>
<table border=1><caption><strong>Scripts For Custom Services</strong></caption>
<tr>
<td>Name</td><td>Attributes</td><td>Actions</td>
</tr>
<tr>
<td>GET_PURGE_LIST</td>
<td>com.ameriprise.ServiceHandlerSample
0
PUTRGE_LIST_PAGE
null
null<br>
null</td>
<td>3:getPurgeList:GET_LIST:0:null</td>
</tr>
</table>
<@end@>
HTH
- Anand -
Enterprise Service for Business Partner on ERP
Hello,
I'm searching for an Enterprise Service for the generic business partner which was introduced in ERP. The application Real Estate Management works with this BP and I can't find a service for that.
I know that there are ES for the objects Employee, Supplier and Customer, but on ERP is as well the object business partner.
Hopefully someone can support me.
Best regards,
YvesGot a reply. The ES for the business object: Business Partner will come with EhP4.
Cheers,
Yves -
Enterprise Services and webMethods
I have an environment utilising webMethods as the integration tool for SAP-nonSAP integrations.
My question relates to the future roadmap for enterprise services (ESB and enterprise services repository and registry). Do I utilise SAP PI 7.1 as the enterprise services bus or utilse the webMethods environment?
The reason why I am leaning towards SAP PI is that most of the enterprise services which will be exposed will be from the SAP environment. How would SAP PI manage the existing integrations that use webMethods and how much work would be involved in exposing these are services?
From a BPM and BAM perspective, would the PI enterprise services environment be able to monitor and interrogate the webMethods processes?Hi,
Since you would need to wet your hands by playing with webservice and PI. Please consider the following links.
SOAP scenario
/people/siva.maranani/blog/2005/09/03/invoke-webservices-using-sapxi
https://weblogs.sdn.sap.com/pub/wlg/1334 [original link is broken] [original link is broken] [original link is broken]
https://weblogs.sdn.sap.com/pub/wlg/2131 [original link is broken] [original link is broken] [original link is broken]
https://weblogs.sdn.sap.com/pub/wlg/1442 [original link is broken] [original link is broken] [original link is broken]
Regards
joel
Edited by: joel trinidade on Mar 25, 2009 10:41 AM
Edited by: joel trinidade on Mar 25, 2009 10:43 AM
Maybe you are looking for
-
Manual for creation of new Plant in SAP
Hi Members, I need to test in quality finance related activities, creation of Profit center, Cost center, Standard Heirarchy, etc.. Does anyone help me with the manual for role of Finance guy in creation of new Plant.. Rgrds, Ravi
-
hey guyz my ipod touch 4g is not green battery symbol while charging or syncing on home screen nor it get charge?? plz give me some suggestion
-
I purchased book from I tunes and I want to conver PDF and print some pages. Does anyone know about anything?
-
TS1702 Help on security questions on App Store?
When I go to download an app of App Store it tells me to make it more secure and it comes up with security questions. When I select question nothin appears and it is stopping me from my iPad. Could anybody help me?
-
I cannot install any software. Every time any installer runs, specifically from Apple, it starts to install, then immediately stops. I check the log and I get the same message every time, with the only difference being whatever software I was attempt