Enterprise struture - Plant creation without ref. to plant 0001

Dear all
Does anyone knows if I have any impacts if I create the PLANT without copy from plant 0001 from SAP ?
I´m thinking in create directly trhu SPRO > Enterprise Structure > Definition > Logistics u2013 General > Define, copy, delete, check plant > Define Plant , and not use the Copy, delete, check plant.
This procedure do not create trash to other modules like QM for example.
Hope for comments.
Best regards,
Ale

HI,
According to me and according to the best practise of SAP it is recommended to copy from the standard plant.
If you do not copy then all the standard tables will not be copied to the new plant and you have to update one by one to the tables urself which will be a lot more work in the implementation. And you will face a lot of errors also durning the testing which may delay the project as well.
Thanks & Regards,
Kiran

Similar Messages

Problem in creation of any purchasing doc against plant 0001

Hi MM Experts,
I am facing problem in creation of any purchasing doc (i.e: PR or PO) against plant 0001.This is available in the system and assigned to company code. I can create Material master with this plant 0001 and copy to create new plant. But Can't create any pur doc? also in plant list in pur doc showing the rest of the plant except plant 0001.
I m working on ECC 6.0.
Regards,

Dear Sairam/Steve,
I got solution for my problem. The problem is that address number not maintained for 0001 plant.This solution available from the following note. please go thro...
Note 433997 introduced a new logic for the F4 help for plants.
solution proposed in note 433997 :
To maintain the address number of a plant subsequently, startTransaction OX10 for the affected plant ('Change plants') view. Click the 'Address' pushbutton (envelope) or (shiftF5). In the subsequent screen ('Change address'), press Enter or click the 'Copy' pushbutton and save using the 'Save' pushbutton (disk) or (CtrlS).
Then the plant should have an address number and should also be displayed in the search help.
Thank you all
Regards,

Data Loading issue - No local currency found for plant 0001 and sales org

Hi Guru's,
I am trying to load data to 0PLANT_ATTR and I am getting the following error message:
1. No local currency found for plant 0001 and sales organization 0001
2. Plant 1010 : No sales organization found; Local currency cannot be checked
I have also maintained the global setting for currencies in RSA1 for that particular Source System.
Please let me know how to resolve this issue.
Thanks in advance.

Hi,
Refer the lnik and the note mentioned it.
Re: Problem when storing master data 0PLANT_ATTR-Full (i.e. Full Update)
With rgds,
Anil Kumar Sharma .P

Restriction of RFQ creation without PR reference

Dear all,
I want to restrict the RFQ creation without PR reference for certain document type in RFQ say AN.How to do that???
Regards,
Atanu

Hi,
Creation of RFQ without any reference is standard functionality. So restricting it without reference of PR is quite tricky.
I can suggest you to use field selection key.
For example, as standard for document type AN, SAP uses field selection key ANA. You copy this key and create your own new key. In this key you can find field 'PR' under field selection group 'Reference data. item'. Mark this field as required entry. Assign your new key to document type.
Please try this out and let me know how it worked.
Regards,
Sameer

You cannot switch to a movement type without ref. to a PO

I created a PO from a P.Rq. [ from MDO4]
NOW WHEN i TRY TO DO GOODS RECEIPT .....MIGO
i GET "you cannot switch to a movement type without ref. to a PO"
{You have replaced the movement type suggested with another movement type that does not refer to a purchase order.}
I have used the PO as reference that was created from the P.Rq. nothing was edited.(mvt 501 was self proposed in migo)
what does the system want me to here ?
Thx

Hi,
Check in MIGO Transaction, what is the movement type showing GR for Goods Receipt in right side.If it is showing 501 , changed it to 101 Movement type make it Change to Default Values 101. Now you can post GR with respect to PO.
Note:
501 Movement type used for receiving goods without PO
101 Movement type used for receiving goods with respect to PO
Regards,
Biju K

Movement type without ref. to a PO

hi,
i am doing a MIGO when i do all the things it show me an error
"You cannot switch to a movement type without ref. to a PO
Message no. MIGO030
Diagnosis
You have replaced the movement type suggested with another movement type that does not refer to a purchase order.
Procedure
Make sure your entries are correct.
Choose a movement type from the list of possible entries."
please suggest what action i have to take
Regards
Maashish

Dear,
Use MB1C, and movent type 501.
this may help u
Reagrds,
Pardeep Malik

Blocking PO creation without a Purch. Req

Hello Team,
We need to make sure that PO can be created only if there is a Purchase Requisition already created. How do I stop the system from Blocking PO creation without reference to a requisition?
I will appreciate your feedback.
Joel.

Hi,
There are two alternative solutions you can think of -
1) Set up the related authorization key in OMET and assign this key to your buyer with parameter EFB; or
20 Define the ''error'' release strategy if PO is created without reference to PR. In this particular case, the user exit shall be activated to append the CEKKO communication structure to include MRP Controller as part of the release strategy structure.
Cheers,
HT

Pricing in outbound delivery without ref to sales order

Hello,
I am creating a delivery without ref to sales order. I need to do pricing in the delivery for the material sold.
1 ) I have never done the above. can someone tell what are the config steps for the same and what is the t code to create condition records (is it same as VK11 ).
2 ) secondly I need to carry the pricing in the delivery to the proform invoice created with ref to delivery. How to do the same.
regards
Pamela

Hi
1 ) I have never done the above. can someone tell what are the config steps for the same and what is the t code to create
condition records (is it same as VK11 ).
Yes You need to maintain Condition Records Through VK11 only
2 ) secondly I need to carry the pricing in the delivery to the proform invoice created with ref to delivery. How to do the same.
But i am not why you required pricing procedure in delivery , but most the cases Delivery level we required Freight Charges
At the time of Pro-forma Invoice system will pick the pricing procedure and you can check
if you still want pricing procedure in Delivery level , assign Pricing procedure to Delivery Type
Menu Path: SPRO> Logistics Execution>Shipping>Basic Shipping Functions>Pricing--->Define Pricing Procedures for Delivery
Regards,
Prasanna

Block in delivery without ref to sales order

Hi,
I want to make a delivery without ref to sales order. But I want to block it after saving it. How to do that ?
Can I assign a block at schedule line category level. Will that block the delivery ? Will this be an item block if this is possible !
regards
Sachin

Hello Sachin,
I want to make a delivery without ref to sales order. But I want to block it after saving it. How to do that ?
Use TCode VL02NO
Can I assign a block at schedule line category level. Will that block the delivery ? Will this be an item block if this is possible !
Delivery block at schedule line category level will not block deliver doc, whereas, it will not allow you to create delivery doc with reference to that sales order with delivery block.
Now for your requirement, to block a delivery doc for further processing. Maintain or select appropriate Reason for Rejection in Delivery Doc Item.
Regards
JP

No company code found for plant 0001 and sales organization 0001

Hi BW Experts,
I am using the datasource 0PLANT_ATTR.While loading the data, i am getting the warning message as "No company code found for plant 0001 and sales organization 0001". I have replicated all the Currencies by using the "Global Settings".Do i need to do any settings in BW Side.
Please help on this Issue.
Thanks,
Ram

Hi Ram,
It is not pertaining to the Currency translations or any?
The warning message is because:
In the 0PLANT there is 0comp_code as attribute; while loading the data from 0PLANT_ATTR datasource there for that particular PLANT "0001" and Sales Org "0001" system couldnt find the 0comp_code.
As it is not maintained in the R/3 system.
This is why the warning messages are coming out..
Hope you understood...
Regards,
Ravi Kanth

Automated vendor block on creation without user inputs

Hi All,
I want to block the vendor in creation without user inputs:
Not in T-code mk01<extras<blocked data, and definiately not after creating the vendor and using t-code MK05.
How i can change a field in table LFA1 while creating the vendor.
the field that i want to set is LFA1-SPERM (for all purchasing Org).
Please suggest if you have any ideas how this can be done.
Thanks,
Mamta

Hi,
Not sure your issue was solved already.
However, if not resolved already try this
create an explicit enhancement in include MF02KFV0
ENHANCEMENT 3 ZFI_VENDOR_CREATE.
IF SY-TCODE = 'MK01''.
LFA1-SPERM = `X`.
ENDIF.
ENDENHANCEMENT.
Enhancement Spot :ES_MF02KFV0
Program: MF02KFV0
Enhancement Implementation type: Dynamic Enhancement Point
Enhancement Implementation POint: \IC:MF02KFV0\EX:VERBUCHUNGSAUFRUF_02\EI
Regards
Raja

Material creation without specifying plant

can i create a material without specifying a plant or storage location?is it possible.?what are differnt types of stocks in gr.

Dear Kunal,
You would need to give plant for plant relevant views. However, you would not need to give plant for views like Basic Data which is valid for entire organization.
Different Stocks:
1. Unrestricted Use of Stock
2. Quality Inspection Stock
3. Blocked Stock
Special stocks and special procurement types are divided into the following areas:
· Consignment
· Subcontracting
· Stock transfer using stock transport order
· Third-party processing
· Returnable transport packaging
· Pipeline handling
· Sales order stock
· Project stock
Regards,
Naveen.

Process Order Creation without Standard Cost

Hello All,
I need a functionality.. If standard cost is not released for a period , system should not allow me to create a process order in the certain period.
Is any standard configurations allow me to achieve this????
Thanks & regards
Mahesh
Message was edited by:
Maheshbabu M G

Mahesh,
Standard SAP allows creation of order without Std cost estimate. Only in REM you could make it give error.
However I suggest you could implement the exit PPCO0006.
In this the function module EXIT_SAPLCOZF_003 contains the import parameter CAUFVD_IMP which has material number (MATNR) and plant (WERKS). Pass these to table MBEW and get the value of STPRS (std cost). If this value is 0 then give the error.
Hope this is useful....if so reward points and close this thread.
Regards
Ram

Purchase Order Creation without account assignment

Hi All,
Is it possible to create a purchase order without assigning account assignment category?
If yes kindly provide the configuration steps?
Regards
Krishna

Hi ,
Purchase orders can be created without account assignments . For stock material which are comes under valuation are purchased without reference to account assignment , automatic account determination is requied here . For each material type and plant combination you have to make quantity and value update .
Regards
Raga

Material creation without user intervention

i have to create a material without user intervention. i am using BAPI_MATERIAL_SAVEDATA for this. it is not showing any error. but the return is having the message 'No description found'. how to transfer the description to this bapi.
this is the code i am trying:
DATA: mnum like zmara01-mno,
       mat_data like BAPIMATHEAD,
       plantx_data like BAPI_MARCX,
       salesx_data like BAPI_MVKEX,
       sale_data like bapi_mvke,
       plant_data like bapi_marc,
       mate_data like bapi_makt,
       E1BP_MAKT like E1BP_MAKT,
       cli_data like bapi_mara.
DATA: E_RETURN LIKE BAPIRET2.
data: MATERIALDESCRIPTION like BAPI_MAKT
                  occurs 0 with header line.
*data: m(18) type c.
CALL FUNCTION 'NUMBER_GET_NEXT'
        EXPORTING
          NR_RANGE_NR                  = '01'
          OBJECT                       = 'ZMNUMBER'
         QUANTITY                      = '1'
       IMPORTING
         NUMBER                        = mnum.
message i003(zmsg) with mnum.
mat_data-material = mnum.
mat_data-ind_sector = 'I'.
mat_data-matl_type = 'DIEN'.
mat_data-basic_view = 'X'.
cli_data-base_uom = 'EA'.
cli_data-base_uom_iso = 'X'.
sale_data-sales_org = 'EISO'.
sale_data-distr_chan = 'SR'.
salesx_data-sales_org = 'EISO'.
salesx_data-distr_chan = 'SR'.
plant_data-plant = 'EIHO'.
plantx_data-plant = 'EIHO'.
CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
EXPORTING
    HEADDATA                   = mat_data
   CLIENTDATA                 = cli_data
CLIENTDATAX                =
   PLANTDATA                  = plant_data
   PLANTDATAX                 = plantx_data
FORECASTPARAMETERS         =
FORECASTPARAMETERSX        =
PLANNINGDATA               =
PLANNINGDATAX              =
STORAGELOCATIONDATA        =
STORAGELOCATIONDATAX       =
VALUATIONDATA              =
VALUATIONDATAX             =
WAREHOUSENUMBERDATA        =
WAREHOUSENUMBERDATAX       =
   SALESDATA                  = sale_data
   SALESDATAX                 = salesx_data
STORAGETYPEDATA            =
STORAGETYPEDATAX           =
FLAG_ONLINE                = ' '
FLAG_CAD_CALL              = ' '
NO_DEQUEUE                 = ' '
IMPORTING
   RETURN                     = E_RETURN
TABLES
   MATERIALDESCRIPTION        = MATERIALDESCRIPTION
UNITSOFMEASURE             =
UNITSOFMEASUREX            =
INTERNATIONALARTNOS        =
MATERIALLONGTEXT           =
TAXCLASSIFICATIONS         =
RETURNMESSAGES             =
PRTDATA                    =
PRTDATAX                   =
EXTENSIONIN                =
EXTENSIONINX               =
loop at materialdescription.
message I004(I) with materialdescription-matl_desc.
endloop .
MESSAGE I004(I) WITH E_RETURN-TYPE.
    if sy-subrc = 0.
     message i005(zmsg).
    elseif sy-subrc <> 0.
     message e006(zmsg).
    endif.
i am trying to give direct entries to test it . please help in this issue immediately.

Hi dear,
welcome on board!
If you want an answer immediately I think you have to post your question in a more appropriate forum...
take a look to https://www.sdn.sap.com/sdn/collaboration.sdn and choose one of the available forums !
Good luck!
Roberto

Enterprise struture - Plant creation without ref. to plant 0001

Similar Messages

Maybe you are looking for