Enterprise Web Filtering solution

We just changed our
network topology so every office directly connects to the internet instead of pushing all traffic through HQ.
We are using an on premise
Websense server, but now that all remote offices directly connect to the internet we want to look for different options.
The Solution needs the ability:
1 – Good reporting for user web activity is a must.
2 - Need to be able to support 500 - 1000 users
3 - Must support Citrix servers
4 - Needs the ability to whitelist sites like our cloud video
conference system(Blue Jeans)
We have 20 offices, and don't
want to put an appliance at every location. 
Thanks for any suggestions
This topic first appeared in the Spiceworks Community

I agree with Stephen/Steve's post.  Get someone to do the design, pre-installation survey, implementation and post-implementation survey.  There are alot of things that can go wrong and there are misconceptions that need to be ironed out.  For example:
There are 50+ offices from 20-600 users.
Ok.  There's no biggie with the statement above.  But it will not "gell" with the statement below:
User should be able to roam everywhere.
Alot of executives believe (incorrectly) that WLAN roaming and mobile/cell phone roaming are synonymous.  This perception needs to be taken with caution.
You have 50+ offices.  Ok, I get this.  Now unless you are going to tell me that the "open space" between each offices will be covered with your WLAN then there's no such thing as "roaming".  You will get the feeling of "roaming" when you are, for example, in an office with wall-to-wall wireless and you walk from one end of the building to the opposite end and you are still continuously on the wireless.  This is possible because your client was able to continuously connect to the same WLAN and the WLAN handed your client from one WAP to another. 

Similar Messages

  • Can Cisco connect be used for small business web filtering?

    I am searching for a web filtering solution for our small church.  The core requirement is to use a hardware-based solution to filter all internet traffic.  Our current wiring looks like this: [ISP router] --> [switch] --> [Open Mesh wireless access points].  Can I connect a Linksys EA2700/3500/4500/6500 between the [ISP router] and the [Switch], disable the Linksys wireless, and use Cisco Connect to filter all the internet traffic?
    More info: We will only have a handful of wired/wireless devices which we have control over.  We expect most of the rest of the traffic to be generally outside our control via personally owned devices connecting thru the public wifi.  Therefore any solution which requires installation of software on individual devices will not work.
    (If there are other threads on this topic I'd be more than happy to read them, I just couldn't find any.)
    Thanks!!

    Hey
    check this article:
    http://www.oracle.com/technology/pub/articles/cunningham-database-xe.html
    Regards

  • Global Web Filtering Options

    I am looking for a global web filtering solution for our business but am having trouble finding a solution that will work acceptably for us globally.
    The problem is that our campany has hundreds of very small offices (mostly only 2-3 users with the odd larger office) located in remote locations all around the world where WAN links are very expensive and slow.
    We use all small office type cisco routers in our remote offices of various types (such as 800 series) and are rolling out WAAS/WAVE solutions to optimise our slow WAN links as much as possible, and all sites have site-to-site VPNs from the routers to our UK-based data centres.
    Currently we use Websense configured on the local routers at a few of our offices with a regional server in places such as the UK for most of Europe, and Mobile for most of the US for example.
    We could expand this to all locations, including Australasia, Middle East, Far East and Africa etc. but due to the remote locations we would need many local servers in many countries as the infrastructure to have just one regional Websense server isn't good enough in these areas and web performance would be too slow to be useable due to the latency to the Websense server location. It simply isn't financially feasible to put in hundreds of servers at lots of 2-3 man offices in the middle of no-where so I've been looking at other options.
    I was hoping a hosted solution would be the answer, but I've looked at WebSense's hosted service and it doen't appear to cover all regions (just has server farms in US/Europe which is no good for Africa etc.) I've also looked at Symantec MessageLabs but this has the same problem as there is no coverage in the Middle East/Asia/Africa etc and it proxies all web traffic so performance at these sites would probably be appaling with the limited bandwidth on top of the latency to the closest MessageLabs servers.
    I've now seen that Cisco have a new IOS Content Filter which uses Trend database servers. This sounded promising as it appears to cache the URL checks on the router making the server location less of an issue. But I'd still like to know where in the world they cover (I've seen reference to only 4 data centres globally). My other concern with this solution is whether it integrates into AD, so we can apply policies based on the user accounts like we do currently with the WebSense solution. The last thing is the price of this solution as it appears to be licensed based on the number of routers rather than the number of users. As our users are so spread out with only 2-3 users per router on average this is likely to mean for us this solution will be ridiculously expensive, can anyone advise if this is the case?
    My question therefore is can anyone advise on a solution for this that will work with our Cisco infrastructure in all our offices without having to purchase lots of servers for remote locations? I've seen that other vendors such as the Astaro Security Gateway have web filtering built into their products without the need for external servers, but I'd prefer to stick with Cisco if at all possible.
    Many thanks for any advice/help anyone can give me in this area.
    Paul

    Hi Paul,
    IOS Content filtering is licensed on a per router basis, you are right. So, probably that would not scale for you.
    Cisco has other solutions with Web Filtering and Ironport engines. The challenge in your setup is that each remote site would need to "call" to a central web filtering location that will be making the decision on allowing or no. Or you would need a service that scales well on a per contintent basis. There are some new Cisco web filtering options that could scale with servers almost everywhere in the world. But I don't think you can get a consice answer from this forum about your potential choices here.
    You local Cisco team will be able to provide you with these options. You are welcome to give them my email if they need to talk to me internally.
    I hope it helps a little.
    PK

  • Implementing the Enterprise Support in Solution Manager

    Hi Experts,
    Can anybody tell me what are the pre requisites to implement Enterprise support in solution manager?
    Also let me know what are steps involved in implementing the enterprise support.
    Thanks in Advance
    Hari

    Hello Hari,
    In order to implement Enterprise Support your organization should registered as a Value Added Reseller(VAR) with SAP. You can get all the required documentation under https://websmp104.sap-ag.de/solutionmanager --> Information for VARs, ASPs and AHPs which is in the left hand side of the page. However, you need to have a S-user ID of the VAR.
    The following are the steps need to perform in implementing the Enterprise Support firmly known as Service Desk for VARs.
    1. SAP Solution Manager basic settings (IMG)
      a) Initial Configuration Part I
      b) Maintain Profile Parameters
      c) Maintain Logical Systems
      d) Maintain SAP Customer Numbers
      e) Initial Configuration Part II
         1) Activate BC Set
             a) Activate Service Desk BC Set
             b) Activate Issue Monitoring BC set
             c) Set-up Maintainance optimizer
             d) Change online Documentation Settings
             e) Activate Solution Manager Services
             f) Activate integration with change request Managemnt
             g) Define service desk connection in Solution Manager
       2)Get components for SAP Service Market place
            a) Get SAP Components
       3) Get Service Desk Screen Profile
           a)generate Business Partener Screen
       4)Copy By price list
           a)activate Service Desk BC Set
           b)Activate Issue Monitoring BC set
           c)Set-up Maintainance optimizer
          f) Business Add-In for RFC Connections with several SAP customers
          g) Business Add-In for RFC Connection of Several SAP Cust. no.
          h) Set-Up SAP Support Connection for Customers
          i) Assign S-user for SAP Support Portal functionality
          j) Schedule Background Jobs
          k) Set-Up System Landscape
          l) Create Key Users
          m) Create Message Processor
    2. Multiple SAP Customer Numbers
          a) Business Add-In for RFC Connections with several SAP customer numbers
          b) Set-Up SAP Support Connection for Customers
    3. Data transfer from SAP
          a) Data Transfer from SAP
    4. Create u201COrganizationu201D Business Partner
    5. Service Provider function (IMG)
          a) Business Add-In for RFC Connections with several SAP customer numbers
          b) Business Add-In for Text Authorization Check
          c) Activate BC Set for Service Provider
          d) Activate Text Types
          e) Adjust Service Desk Roles for Service Provider Menu
    6. Service Provider: Value-Added Reseller (VAR)
          a) Business Add-In to Process Actions (Post-Processing Framework)
         b) Activate BC Sets for Configuration
         c) Create Hierarchy and Product Category
         d) Set-Up Subcategories
         e) Create Business Partner as Person Automatically
         f) Set-Up Automatic Confirmation of Messages
        g) Maintain Business Partner Call Times
        h) Set-Up Incident Management Work Center
    7. Work Center (Web UI)
        a) Activate Solution Manager Services
        b) Assign Work Center Roles to Users
    Hope it helps.
    Regards,
    Satish.

  • Hyperion Enterprise web error message

    Hi,
    I am using Hyperion Enterprise 6.5 version, When i tried to enable web version of Hyperion enterprise web by browsing http:\\localhost\Heweb from the server
    Server Error in '/HEWeb' Application.
    Module not found:he.hecontainer
    Object variable or With block variable not set.
    Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
    Exception Details: System.NullReferenceException: Object variable or With block variable not set.
    Source Error:
    Line 338:     ' Get the application list
    Line 339:
    Line 340: vtStatusCode = Application("EntAppObject").EnumAppsForLogon(vtAppListXML, vtStatusDesc)
    Line 341:
    Line 342: Dim domXML
    Source File: C:\Program Files (x86)\Hyperion Solutions\Hyperion Enterprise\HEWeb\LogonMain.aspx Line: 340
    Stack Trace:
    [NullReferenceException: Object variable or With block variable not set.]
    Microsoft.VisualBasic.CompilerServices.Container..ctor(Object Instance) +765074
    Microsoft.VisualBasic.CompilerServices.NewLateBinding.LateGet(Object Instance, Type Type, String MemberName, Object[] Arguments, String[] ArgumentNames, Type[] TypeArguments, Boolean[] CopyBack) +538
    ASP.logonmain_aspx.__Render__control1(HtmlTextWriter __w, Control parameterContainer) in C:\Program Files (x86)\Hyperion Solutions\Hyperion Enterprise\HEWeb\LogonMain.aspx:340
    System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +115
    System.Web.UI.Page.Render(HtmlTextWriter writer) +38
    System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +4240
    Version Information: Microsoft .NET Framework Version:2.0.50727.3615; ASP.NET Version:2.0.50727.3601

    Hi Rakesh,
    1.) Please confirm you followed the steps below during your HEWEB initialization process? (The first time you enable HEWEB - the applications added need a long time to cache depending on their complexity.)
    *How to Prevent Hyperion Entperise Web Components from Timing out and Dropping from Memory on HEWEB Server [ID 1134663.1]*
    Modified 03-AUG-2010 Type HOWTO Status PUBLISHED
    Applies to:
    Hyperion Enterprise - Version: 6.5.0.0.00 and later [Release: 6.5 and later ]
    Information in this document applies to any platform.
    Goal:
    What steps are required to prevent an application loaded into HEWEB from timing out and dropping from memory thus requiring users to wait for the application to re-load whilst the connect?
    Solution:
    In order to use Hyperion Enterprise Web (HEWEB) and Hyperion Smartview for Enterprise (HSE) the application you wish to connect to needs to be Enabled for HEWEB on the designated HEWEB server.
    To enable an Application for HEWEB the designated HEWEB Server needs to have Microsoft Internet Information Server (MIIS) and ASP.NET installed.
    If the HWEB component has never been installed, the Enterprise Installer needs to be run selecting the HEWEB option on the Install component list. Once selected and run the install. This will install the required version of HEWEB and ASP.NET.
    If the HEWEB server has been installed, in order to Web Enable the application(s) required follow the steps below:
    1.Login to Enterprise as a user with Admin Rights.
    2. Enter the Application Module from the Enterprise Desktop.
    3. Choose the Navigate menu followed by Server Administration.
    4. In the Web Server pane select the Enabled check box.
    Set the Web Server URL to read http://YOUR SERVERNAME.
    Set the Session Manager, task Server and Web Application Controller to be just the server name.
    Set the upload location to be a suitable folder on the server in which to store dataload files.
    5. If using Hyperion Enterprise Reporting Web (HERW) as well as HEWEB:
    Set the Server name for your HERW server in the Hyperion Enterprise Reporting Web Server.
    6. Leave the number of connections set to 12.
    7. Once these parameters are all set. Hit Apply.
    Depending on your application size and complexity of your metadata, after a delay, three processes will start up and consume memory and CPU. These are HeAppController.EXE, HeDataController.EXE and HeAppMgr.EXE. The time taken is a function of application metadata complexity and NOT the amount of data within the application.
    Once the HeAppController.EXE has settles to 0% CPU utilization and the process memory usage has stopped increasing the application has loaded into HEWEB and should be visible in the list of applications when you hit the link http://YOURSERVERNAME/HeWeb/default.asp from a browser.
    If the application takes a very long time to load, the amount of time can be reduced with no adverse affect by editing the Applicationname.ini located in the application folder to include the line ENABLECACHEFORSMARTVIEW=”0” towards the end of the file.
    After some time these 3 processes, HeAppController.EXE, HeDataController.EXE and HeAppMgr.EXE will drop from memory and if the line WEBAUTOSTART=1 is set in your server Hypent.ini file, these processes will re-load when a user hits the HEWEB server via a browser or makes a Smartview Connection attempt.
    Note if the load process for your application takes a long time, the first users to hit the server will have to wait while the processes re-load.
    This can cause user confusion and lead users to think the server is down!
    To prevent these processes dropping from memory perform the following steps on your HEWEB server:
    1. From the Start Run command run INETMGR to bring up Microsoft Internet Information Manager Console.
    2. Identify the Default Application Pool in the left hand pane by drilling down into Application Pools.
    3. Right Click on the Default Application Pool and select properties.
    4. Find the re-cycling TAG and edit the value in Recycle work processes in minutes to a long period i.e. 28800 (20 days).
    5. Find the Performance Tag.
    6. DESELECT, Shutdown worker processes after being idle for (time in minutes).
    7. Exit from the Web pools setting and close down INETMGR.
    8. From the start button re-set IIS services by issuing the command IISRESET from the run box.
    9. IIS will now re-start and then once initially called the process for HEWEB should not remain in memory for the duration of the period specified.
    Note: Be wary of taking back-ups while the webserver connection are held open. It is advised that the internal Enterprise back-ups are used which will not be affected by the HEWEB process remaining active.
    2.) In your previous post you mentioned that you followed all of the installation steps required for installing HE 6.5.1. Could you please confirm that this was a new installation? Or was this an upgrade from an older version?
    Let me know how you get on.
    G'Luck,
    -David

  • New Web Filtering in iOS7

    Apple have introduced the Web Filtering option in iOS7, but there is little informaiton out there explaining how this works.  Apart from being able to turn it on, and add whitelist or blacklist sites - is there any more?  How does Apple determine what content is blocked?  Are there categories?  Can we see them?  Can we control them?
    Without a bit more information on this feature and how it operates it's hard to trust it.
    Does anyone have any more information on this feature?

    Email?...just click on my Accout....or directly to [email protected]
    Yes, we want to offer a service for customers that include a very secure server thats hosted on hosteurope.de included is a workspace for 5000min Video and a safe dedicated bandwidth up and down. Firstly there is no need to invest in new hardware or network infrastructure. The second is the security thing, we dont want the people to handle around with their open ports to the internet, because thats a huge risk for sensitive production enviromets because that might be an open door for hacker. You cannot ensure that there are always competent Admins onside.
    Also the access to the server is hardly to handle with a standard DSL-Connection. What is if 10 users want to watch the same clip? Do you have a upload of min 10mbit?
    And: Dontyou need a management of the users?? The Integrationsample has just none. I think thats recommendend for a review application. Appart from that you can just upload 10clips!?
    Another point is the fact we love in FCsvr, updated features and bugfixes do not need to install a new version locally. So we did a lot of thinking, an come to the conclusion that thats the best. So, in case of that services we cannot offer that for free. Je decided to charge a annual fee.
    The online sample of RevApp is just to try a bit around, till end of november we want to include much more features.
    I am curious about that what eZ will release and how they handle the local istallation and the usermanagement...
    We are also very interested in People who have a critical look on our solution an help us to improve. Ideas of future features are also very welcome.
    So no offence at all, hope more people give us a feedback like you.
    Greetings Jan

  • Web Start & Enterprise Web Start Server

    Hi all
    I looked around Solaris Web Start thing and it looks great to me. But there are still too many things I don't understand. I already browsed Sun sites but did not succeed to get clear status of the whole situation.
    First, let me explain what I would like to do. I want to remotely install several Sun machines (with both Solaris and my own applications) from a unique graphical interface. For example, I sit in front of any PC with a browser and just go to the installation URL. That's it.
    At first sight, I thought Sun Enterprise Web Start Server would be the solution. But, I've only found that page: http://www.sun.com/servers/sw/webstart/ and the download link is broken. Anyone knows where it has gone? And does it answer to my needs?
    I see this other possibility: to use Web Start Wizards. It is Java software and it is said that it can be used to install software remotely. My question is: does it rely on Java Web Start? If not, how does it work?

    Hi Sebgrel,
    I've the some problem. I'm looking for a GUI for customized jumpstart installations but the only link that I've found is the same link you have. When in the page http://www.sun.com/servers/sw/webstart I click on "Download Sun Enterprise Web Start Server Now!" the corrispondent page "http://sunsolve2.sun.com/fcs/WSS/index.html" not exists. I sent an email to SunSolve Support Team web master ([email protected]).
    Following you can see the complete email history (starting from the bottom):
    =======================================
    -----Original Message-----
    From: <myuser>
    Sent: gioved� 30 dicembre 2004 9.50
    To: 'SunSolve Support Team'
    Subject: RE: Sun.com Email - Broken Link Report: Broken link (PR#1382) (SSO#18339)
    Hi SunSolve Support Team,
    as you can read following, you have been addressed to the resepective team the analysis of the link broken at 3 of dicember. But at this time the error is still present. Can you speed up the fixing of the error or give me another way to download ?
    Many thanks,
    Regards
    EV
    <mailto: myuser>
    -----Original Message-----
    From: SunSolve Support Team [mailto:[email protected]]
    Sent: venerd� 3 dicembre 2004 20.34
    To: <myuser>
    Cc: [email protected]; [email protected]
    Subject: Re: Sun.com Email - Broken Link Report: Broken link (PR#1382) (SSO#18339)
    Hi Enrico,
    sunsolve2 is a un-supported server, surely there is a mistake in the document
    and it has been addressed to the resepective team.
    Regards,
    SunSolve Support
    >>
    User : myuser (No Phone #)
    URL : http://www.sun.com/servers/sw/webstart/
    Server : www.sun.com
    Type : Broken Link Report
    I wish to notify that at the text "Download Sun Enterprise Web Start Server
    Now!" in the URL above, the corresponding link
    (http://sunsolve2.sun.com/fcs/WSS/index.html) is broken.
    Do you have another link?
    Thanks,
    Regards.
    EV
    ========================================
    Now I'm still wait for an answer since 30 of Dec 2004.
    If they will answer me, I will notify you
    Regards,
    Enrico

  • Enterprise web service for CREMAS

    Is there an SAP delivered Enterprise web service to create vendor data in ECC ?

    Dear Umesh,
    Unfortunately my experience is bound only to axis2, but i think there will be not big differences on what you want to do.
    As i know there are two ways, by-value and by-ref,(and an other one combining the two previous) to make an attachment. The first one is:
    a) by-value solution
    <?xml blablabla?>
    <root>
    <my_elem1 name='xyz'>
    <type>car</type>
    <image>101010101010101010101001010101010100101</image>
    </myelem1>
    <root/>
    This can be made with 'hand'... Meaning what you should do is this(client side):
                    OMFactory fac = OMAbstractFactory.getOMFactory();
              OMNamespace omNs = fac.createOMNamespace("http://you.com","xsd");
              OMElement method = fac.createOMElement("my_elem1", omNs);
                    OMElement value1 = fac.createOMElement("image", null);//<image>  ....    </image>
              value1.addChild(fac.createOMText(value1, ImageData ));//                   /\ server side:
    public void myserviceMethod(OMElement payload){
                  OMElement oe1=payload.getFirstChildWithName(new QName("http://you.com","image"));
                  DataBase.store(   oe1.getText()    );//this is the binary stream(10101010101010101010)
    }b,c) I don't think it make sense(at this point) to describe the other two because i thing they will confuse toy and they wont help you find a solution to your problem(its better start with the first one).

  • Web Filtering Proxy Suggestions

    I'm looking into web-filtering & monitoring software to run in a small business (5 -10 users). Either for use on OS X Server or separate mac machine. Only basic requirements are online-updatable web site classifications and time controls. Anybody currently use anything which I can add to my list, in case I miss something?
    Thanks
    -david
    PS. I'm also looking at hardware based solutions for larger businesses (20-50 users) but this is maybe off-topic for an Apple forum... however...

    dfelicia wrote:Surely more than I need, but this is tempting me: http://www.amazon.com/gp/product/B006TO … B006TODPPS
    The price seems a bit high to me. I "only" paid around  $350 for my Core i3-540 system including a Lian Li PC-Q07B Mini-ITX case, 4GB G.Skill DDR3 ECO Ram and a 500GB 2,5" harddrive.

  • Web filtering/monitoring

    Dear All,
    We have one customer they need web filtering and monitoring product. Please advice me what can be the best solution. They have around 300 users. Can we give them iron port or ASA.
    Your consideration in this regard will highly be commendable.
    Thanks & Regards,
    Malik

    Can you get away with whitelisting just the IP addresses and/or websites that your users need to visit? If so, you can probably use just your ASA. Otherwise you're going to want a good web filtering/proxy solution. Check out IronPort, Webwasher, Blue Coat, SurfControl, or even Squid (open source.)
    You can also tie the ASA directly into a filtering product like WebSense, check out the ASA documentation.
    When deploying a web filtering product you can either go "inline" or transparent by using WCCP redirection, but I'd suggest against it, since it breaks normal web browser behavior. Better option is to use WPAD (web proxy auto-detect) and have your browsers point-to and/or be explicitly configured to use the proxy.

  • ISA570 - SPAM and Web Filtering Only

    I want to use my new IAS570 for SPAM and Web filtering but not as a firewall or VPN endpoint at this time.  I want to contune to use my existing firewall for the other 2 services.  Is it possible to do this and does the ISA570 need an external IP address in order to leverage the other functions?

    Steve,
    I believe you can accomplish what you are wanting by enabling Routing Mode (Networking -> Routing -> Routing Mode).  Routing mode basically turns off NAT on the device but allows the other security functions to still continue working.  So for example, this would be your configuration to add the ISA.
    Placement
    Internet -> Current Firewall -> ISA -> Network Switch(s) -> Workstations/Servers
    Example configs
    Current Firewall
    Outside IP - 1.1.1.1 /24
    Inside IP - 10.0.0.1 /24
    ISA
    WAN1 IP - 10.0.0.2 /24
    WAN Gateway - 10.0.0.1
    LAN IP - 10.1.0.1 /24
    Workstation/Server Gateway - 10.1.0.1
    Additional Configuration
    ISA
    Networking -> Routing -> Routing Mode
    Enable
    Firewall -> Access Control -> ACL Rules
    Add ACL Rule to Permit Any Any and ensure it's at the top of the list
    Security -> Dashboard
    Disable everything except SPAM and Web Filtering
    The ISA doesn't require you to configure an External IP on it.  You just need to ensure it has Internet Access to it can continue to get updates for the services you are utilizing.
    Shawn Eftink
    CCNA/CCDA
    Please rate all helpful posts and mark correct answers to assist others searching for solutions in the community.

  • Overly restrictive Web filtering

    During the day, I'm connected to the Internet behind a very restrictive content filtering appliance. I'd like the ability to simply check my .Mac email and my GMail accounts during lunch, but those sites are blocked.
    What I'm envisioning is using a Web browser at my office (MSIE or Firefox) to connect to a server at my home on port 80 or 443. (Obviously, I'd like my home server to require some kind of authentication to prevent abuse, etc.) My home server would fetch content on my behalf from these other services on whatever ports are necessary (probably 80, 443, etc.) and funnel them back to me.
    I think the answer to my question lies in running my own proxy server at home, but I'm not sure of what my options are. Has anybody out there done something similar to his? I'm hoping for some starting points at the very least.... Thanks!

    Can you get away with whitelisting just the IP addresses and/or websites that your users need to visit? If so, you can probably use just your ASA. Otherwise you're going to want a good web filtering/proxy solution. Check out IronPort, Webwasher, Blue Coat, SurfControl, or even Squid (open source.)
    You can also tie the ASA directly into a filtering product like WebSense, check out the ASA documentation.
    When deploying a web filtering product you can either go "inline" or transparent by using WCCP redirection, but I'd suggest against it, since it breaks normal web browser behavior. Better option is to use WPAD (web proxy auto-detect) and have your browsers point-to and/or be explicitly configured to use the proxy.

  • Implementation of Enterprise Portal on Solution Manager 7.0 /ECC 6.0

    Hello  EP Experts
    Need your help to implement Enterprise Portal on Sulution Manager.   As we know Solution Manager/ECC has Java Stack, and since it has JAVA Stack Currently BI is working and its been using.  Since, BI is there my undrestanding is part of Netweaver is installed on the Box.  So, my Question is;
    1. Is it possible to activiate or implement Enterprise Portal on Solution Manager/ECC with the available resources?
    2. If yes, how to do this? What are the additional contents to be installed
    Please provide me the detailed information regarding this. 
    Thank You
    Aftab

    Hi,
    the enterprise portal is deployed /installed on the Web AS Java - not on solution manager. BI installation comes together with a portal installation. It's also possible to have a WebAS Java without enterprise portal but not in case of BI.
    Regards
    Anja

  • How can I set my WebI filters to Null and not Null

    Folks,
    I have created a report in WebI and now I am to set up some filters as Null and some Not Null.
    How can I set my WebI filters to Null and not Null?
    Regards,
    Bashir Awan

    Hi,
    As you said you could do it at the report level and also at the universe level.
    One more way is to create the filters in the universe levele and add them in thequery filter.
    Ex: in the filter you need to write :
    Column1 is null and and column 2 is not null etc.
    Hope this will help.
    If this did't  solve your problem then please explain it in detail.
    Cheers,
    Ravichandra K

  • Installation Iplanet 4.1 Enterprise Web Server on Linux RedHat 7.1

    I am trying to install IPlanet 4.1 Enterprise Web Server on Linux RedHat 7.1.
    After unloading the software from CDROM to a temp directory, and run ./setup, I get the following error:
    eroor while loading shared libraries; libncurses.so.4: cannot load shared object file : no such file or directory.
    Has anyone know how to resolve it??. Thanks.
    regards,
    Benny Tan

    I have answered for this topic previously for another thread. Please follow the URL to see the answer.
    http://forum.java.sun.com/thread.jsp?thread=257294&forum=14&message=968185

Maybe you are looking for