Entityexception was unhandled by user code
using System;
using System.Collections.Generic;
using System.Linq;
using System.Web;
using System.Web.Mvc;
using MvcDemo.Models;
namespace MvcDemo.Controllers
public class EmployeeController : Controller
public ActionResult Details( int id )
EmployeeContext employeeContext = new EmployeeContext();
Employee employee = employeeContext.Employees.Single(emp => emp.EmployeeId == id); //when i debugg this project then this error line occurred at this line
return View(employee);
i try to retrive data from the table and by id column
Well you need to find out what the error is and post it, because otherwise, only Harry Houdini can pull that rabbit out of the hat for you.
Harry would put a try/catch around the code and catch the exception and pull the rabbit out by its ears.
Similar Messages
-
InvalidOperationException was unhandled by user code
Hi,
I'm trying to validate the date format of the command using these codes. But I'm with the captioned error? Any advice for it?
protected void gv_upd_rec(object sender, GridViewUpdateEventArgs e)
int rIndex = e.RowIndex;
OracleConnection conn = new OracleConnection("Data Source=XE;User ID=my_schema;Password=wsabc;");
OracleDataReader reader;
string start_date = gv1.Rows[rIndex].Cells[1].Text;
string end_date = gv1.Rows[rIndex].Cells[2].Text;
try
OracleCommand cmd = new OracleCommand("select to_date(:start_date,'dd/Mon/rr'),to_date(:end_date,'dd/Mon/rr') from dual", conn);
cmd.Parameters.AddWithValue("start_date", OracleType.VarChar).Value = start_date;
cmd.Parameters.AddWithValue("end_date", OracleType.VarChar).Value = end_date;
reader = cmd.ExecuteReader();
catch (OracleException ex)
ClientScript.RegisterClientScriptBlock(Page.GetType(), "alert", "alert('Invalid date format is entered: " + ex.Message + ".');", true);
return;
finally
}Hi,
You're using Microsoft's data provider, not Oracle's, so a Microsoft forum may be a better place to post your problem.
However, I did try this, and it worked fine for me:
using (OracleConnection con = new OracleConnection("user id=scott;password=tiger;data source=orcl"))
con.Open();
using (OracleCommand cmd = new OracleCommand("", con))
cmd.CommandText = "select to_date(:start_date,'dd/Mon/rr'),to_date(:end_date,'dd/Mon/rr') from dual";
cmd.Parameters.AddWithValue("start_date", OracleType.VarChar).Value = "01/JAN/02";
cmd.Parameters.AddWithValue("end_date", OracleType.VarChar).Value = "01/JAN/08";
OracleDataReader reader = cmd.ExecuteReader();
Console.WriteLine(cmd.ExecuteScalar().ToString());
}OUTPUT
======
1/1/2002 12:00:00 AM
I'm not sure why you're calling both ExecuteReader() and ExecuteScalar(), I assume that's just for debugging purposes?
Greg -
ArgumentException was unhandled by user code
Hi,
I am a new user of ODP.net and Oracle. I have a stored procedure whose in parameter is UDT. It is a table of type Object. I need to know what would be its equivalent in .Net?
E.g.
create or replace
TYPE TEMP_OBJ AS OBJECT (
a_id number,
Name varchar2(256),
flag char(1),
user varchar2(256) )
create or replace
type ACTUALONE is table of TEMP_OBJ
procedure submit_proc
(i_actual in actualone,
o_status out number,
o_err_message out varchar2);
How do I map my oracle fields with the C#.Net. What do I do to execute the above stored procedure i.e. "submit_proc" from my .Net code? I want a code or explanation on how to ride on this beast.837779 wrote:
Hi Alex,
I do not intend to do this stuffs from UI. The link that you have sent me would have been of gr8 help if I had to do it by UI. I want to code my entire requirement and I cannot add the server in the .Net as I do have the tns entries in my .ora file and I am not even allowed to do that. So please if you can send in some code that can explain me the solution to my problem.You should at least read through the walkthrough Alex provided you even if it involves UI elements. It includes the information you are looking for in the "Generating Custom Classes for User-Defined Types" section. -
DirectoryNotFoundException was unhandled by user code
I have taken over a pre-existing application from the previous developer. I was able to successfully compile the application, but when I attempt to debug the application I receive the error message below:
Does anyone have an idea what this is referring to and how to resolve it?
Thanks,
KennyHi Kenny,
Which kind of project did you debug?
>>An unhandled exception of type 'System.IO.DirectoryNotFoundException' occurred in mscorlib.dll
Additional information: Could not find a part of the path...
Generally the error message means that it would be related to the resources management.
Reference:
http://stackoverflow.com/questions/4216396/system-io-directorynotfoundexception-after-deleting-an-empty-folder-and-recreati
https://social.msdn.microsoft.com/Forums/vstudio/en-US/6eacf70d-f229-4cc1-8868-fba98008455a/c-systemiodirectorynotfoundexception-after-deleting-an-empty-folder-and-recreating-it?forum=csharpgeneral
Maybe you could click "View Detail" to get more information in your side, but I doubt that it would be not the VS IDE issue.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Unhandled exception when code runs for the first time,but works fine the second
Hi All,
I have the following code snippet
private void RGL_Click(object sender, RibbonControlEventArgs e)
Word._Document oDoc;
oDoc = Globals.ThisAddIn.Application.ActiveDocument;
object start = oDoc.Content.Start;
object end = oDoc.Content.End;
oDoc.Range(ref start, ref end).LanguageID = WdLanguageID.wdEnglishCanadian;
oDoc.Range(ref start, ref end).NoProofing = 0;
Microsoft.Office.Interop.Word.ReadabilityStatistic DocStats;
DocStats = oDoc.ReadabilityStatistics[10];------>exception occurs here when code runs first time
MessageBox.Show(DocStats.Name + " " + DocStats.Value);
When I copy paste a document and click on the button it raises a COM exception but if I click continue and click on the button again, the correct grade level score is displayed.Cant figure out why this is happening.Thanks for the answer Eugene, this exception never shows up if I type something and click on the rgl button , but if i open a huge document that is already in Canadian english and click on this ribbon it gives me the following exception
System.Runtime.InteropServices.COMException was unhandled by user code
HelpLink=wdmain11.chm#36966
HResult=-2146824090
Message=Command failed
Source=Microsoft Word
ErrorCode=-2146824090
StackTrace:
at Microsoft.Office.Interop.Word.ReadabilityStatistics.get_Item(Object& Index)
at UsabilityMapping_V01.Ribbon1.RGL_Click(Object sender, RibbonControlEventArgs e) in <my path> 1211
at Microsoft.Office.Tools.Ribbon.RibbonPropertyStorage.ControlActionRaise(IRibbonControl control)
at Microsoft.Office.Tools.Ribbon.RibbonPropertyStorage.ButtonClickCallback(RibbonComponentImpl component, Object[] args)
at Microsoft.Office.Tools.Ribbon.RibbonManagerImpl.Invoke(RibbonComponentCallback callback, Object[] args)
at Microsoft.Office.Tools.Ribbon.RibbonMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at Microsoft.Office.Tools.Ribbon.RibbonManagerImpl.System.Reflection.IReflect.InvokeMember(String name, BindingFlags invokeAttr, Binder binder, Object target, Object[] args, ParameterModifier[] modifiers, CultureInfo culture, String[]
namedParameters)
InnerException: -
We are using Sharepoint 2010 and Infopath 2010. In my form, I have a Managed Metadata field that I need to test for a Null value. I found, with the help of this forum's participatns, that a [field]_Changed event for one MMD field runs multiple
time because of the underlying XML elements (Terms, TermInfo, TermName, TermId). So I'm trying to figure out how to test the XML to see when the TermName has a value. By doing this, I hope to limit when the additional code in my form runs, i.e.
I'll only trigger it when TermName is not null.
Just to test for null/empty (before doing anything that calls the addtional code) when I run this code, it completes correctly but always shows a message box:
Dim strTest As String = Me.CreateNavigator.SelectSingleNode("/pr:properties/p:properties/documentManagement/ns2:h2b59c4ae4144c01973b1d8571d217ad", Me.NamespaceManager).InnerXml
If String.IsNullOrEmpty(strTest) Then
Else
MessageBox.Show("This is the value of the States InnerXML " & strTest)
End If
But when I run this code, I get a "NullReferenceException was not handled by user code. Object reference not set to an instance of an object" at the "Dim strTest..." line:
Dim strTest As String = Me.CreateNavigator.SelectSingleNode("/pr:properties/p:properties/documentManagement/ns2:h2b59c4ae4144c01973b1d8571d217ad/pc:Terms/pc:TermInfo/pc:TermName", Me.NamespaceManager).InnerXml
If String.IsNullOrEmpty(strTest) Then
Else
MessageBox.Show("This is the value of the States InnerXML " & strTest)
End If
Can any one explain why drilling down like this gives me this error? And can you tell me how to get around it so I can limit how many times the code in my Infopath form needs to run?
Thanks in advance. Carol.Never mind, I think I've got it figured out. When I do it this way, I get to the If Not...Nothing at the correct time. Thanks for sending me down the correct path, Scott. Carol.:
Dim
firstStr As
String =
String.Empty
Dim xNav
As XPathNavigator = MainDataSource.CreateNavigator()
Dim xFirst
As XPathNavigator = xNav.SelectSingleNode("/pr:properties/p:properties/documentManagement/ns2:h2b59c4ae4144c01973b1d8571d217ad/pc:Terms/pc:TermInfo/pc:TermName",
Me.NamespaceManager)
If
Not xFirst
Is
Nothing
Then
Dim strxFirst
As
String = xFirst.InnerXml
MessageBox.Show(
"Value of InnerXML " & strxFirst)
Else
MessageBox.Show(
"Empty or Null")
End
If -
ExternalException was unhandled : A generic error occurred in GDI+.
I am try to save this bitmap as jpg file for every 5 sec. It works fine at another application, before I move this method to another app. The error message shows ExternalException was unhandled : A generic error occurred in GDI+. I do not know if
it is write permission issure or anything else. Since I use same computer and try to save at same file path, the error message keep going. I think I need help.
The error code:
public void captureScreen()
bmpScreenshot = new Bitmap(Screen.PrimaryScreen.Bounds.Width, Screen.PrimaryScreen.Bounds.Height);
Debug.WriteLine("width:{0}, height:{1}", Screen.PrimaryScreen.Bounds.Width, Screen.PrimaryScreen.Bounds.Height);
gfxScreenshot = Graphics.FromImage(bmpScreenshot);
gfxScreenshot.CopyFromScreen(Screen.PrimaryScreen.Bounds.X, Screen.PrimaryScreen.Bounds.Y, 0, 0, Screen.PrimaryScreen.Bounds.Size, CopyPixelOperation.SourceCopy);
//Save the screenshot to the specified path that the user has chosen
i++;
string i1 = Convert.ToString(i);
string name = "good" + i1 + ".jpg";
ImageCodecInfo jpg = GetEncoder(ImageFormat.Jpeg);
System.Drawing.Imaging.Encoder myEncoder = System.Drawing.Imaging.Encoder.Quality;
EncoderParameters myEncoderParameters = new EncoderParameters(1);
EncoderParameter myEncoderParameter = new EncoderParameter(myEncoder,
50L);
myEncoderParameters.Param[0] = myEncoderParameter;
bmpScreenshot.Save(name, jpg,
myEncoderParameters);
Bitmap bitmap = new Bitmap(name);
System.Drawing.Image image = (System.Drawing.Image)bitmap;
The error shows here:
bmpScreenshot.Save(name, jpg,
myEncoderParameters);
And Only alow me save one jpg, then pop up errorHi
Since I can't reproduce your issue with some
undefined code.
Just take a look at from
Graphics.FromImage Method
in MSDN document.
You should always call the Dispose method to release the
Graphics and related resources created by the
FromImage method. Please try and test it again.
If still can't resolve, please post the complete code. Thanks.
Have a nice day!
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Crystal Report 11 error "AccessViolationException was unhandled" on windows
We have migrated VB code to VS 2010. We are using Crystal Report 11 with Visual Studio 2010, Crystal report is working fine with other Windows OS but not working in Windows 7 OS it throws an error "AccessViolationException was unhandled". We are using Crystal Report viewer, the error stops at the viewer control and gives the above error. Please let me know what is the solution for this
Note: All admin rights has been given to systemOnly version of CR runtime supported in VS 2010 is Cr for VS 2010:
http://downloads.businessobjects.com/akdlm/cr4vs2010/CRforVS_13_0_1.exe
Thank you
Don -
Setting the User Code for RICOH Aficio MP C 4000
Hi guys, initially I had trouble setting my office network printer. But the thread at http://discussions.apple.com/thread.jspa?threadID=2235451 helped a lot. Now I am still stuck as the office uses "user codes" for each of the staff but when I tried to set it up, i couldn't punch in any numbers as only 4 options were presented ie nos from 1001-1004.
I might be wrong but it seems to me that the user codes could be hardcoded in a text file somewhere. Question is how do I do that?
Thanksso ive read and done everything on this feed. i also noticed that this question was marked at answered but it doesnt seem like the answer should be to hook into another printer.
im trying to print to my office printer, Ricoh aficio mp c5000, and im so close i can taste it but i must be missing something.
ive called applecare, ricoh, downloaded wayyy too many drivers, done everything in this feed and still nothing... well not exactly.
when i hit print the printer wakes up and makes noise but it doesnt pickup any paper or actually print. i can hear things startup and start spinning but nothing prints.
i know that for all the pc's that work on this printer, have to print in black and white or otherwise enter a Valid Access for color. I dont even see the option of valid access in the print settings.
also
i saw an option of finisher, option tray, upper internal tray, and internal shift tray. would those settings play a part as to why im not printing (using the Ricoh Aficio MP C5000 PXL driver)
Please help -
Is there any safe way to change a user code? The problem is that user 'ABC' was given a license in one company. Then, another company was created with user 'abc'. The license was not allocated to this new user because of the uppercase/lowercase difference. However, we cannot create user 'ABC' in the new company because user codes are not case-sensitive in general. Is there any way to delete a user from OUSR or rename the user code? Or allocate the license for 'ABC' in company A to 'abc' in company B? Thanks for the help.
Hi Brian.......
Its not at all possible when the particular code is in use. Infact any of the codes can not be renamed once it is used.
But in order to achieve this you can lock these ABC and abc user codes and can create a new user in both the DBs and can share the same license..........
Regards,
Rahul -
Printing at Ricoh C3501 with user code
My MBP running below printer drivers for printing to Ricoh C3501 with user code.
foomatic-rip-4.0.6.230.dmg
gplgs-8.71.dmg
pxlmono-1.9.dmg
RicohUserCodes.command
As Matt Broughton recommanded before upgrade. The printing worked fine.
After upgrade to Yosemite, my MBP can no longer print on Ricoh c3501. Checking the printing queue, the print job is gone, but, actually, the doc is not printed.
This was happen if I select color print but using grayscale user code, but this time I select grayscale printing and using grayscale user code and still could not print as my MBP did before iOS upgrade.
After checking my colleagues, all the Mac in my company upgrading to Yosemite have the same printing problem.
Please help out what else I can do to fix the issue.
Thank you.
BillHi Bill,
This video helped me out with my printing problem and maybe it will help you with yours. Printer/Scanner Help With Yosemite
-crazy -
TypeInitializationException was unhandled
Hello,
I was able to successfully compile this program, but received this error message when trying to debug.
Can anyone provide any help or advice on how to best go about resolving this?
KennyHi Kenny,
It showed the exception window since we enabled the exception thrown under Debug->Exception window.
But the real issue would be related to your project code.
Reference:
http://stackoverflow.com/questions/4110168/c-sharp-error-when-i-try-to-compile
http://stackoverflow.com/questions/5179156/system-typeinitializationexception-was-unhandled
Like above two cases, you would look at the detailed inner exception to find out where the real problem is.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Need help with Connect 4 game, IndexOutOfRangeException was unhandled
Hi! I've been struggling with this for a while now, the issue is that as soon i move a game piece to the field i get this errorats "IndexOutOfRangeException was unhandled" and i don't know why since my intention with the code was to use for loops
look through the 2D array thats based on two constants: BOARDSIZEx = 9 and BOARDSIZEy = 6. Instead of traditional 7*6 connect 4 grid i made it 9 squares wide due to having pieces on the side to drag and drop.
Here's the code for my checkwin:
public bool checkWin(Piece[,] pieceArray, bool movebool)
bool found = false;
//Horizontal
for (int i = 0; i < BOARDSIZEx - 3; i++)
for (int j = 0; j < BOARDSIZEy; j++)
if ((pieceArray[i, j] != null)
&& (pieceArray[i, j] == pieceArray[i, j + 1])
&& (pieceArray[i, j] == pieceArray[i, j + 2])
&& (pieceArray[i, j] == pieceArray[i, j + 3]))
if (pieceArray[i, j].IsStarter != movebool)
found = true;
goto Done; //interesting way of getting out of nested for loop
//for more on goto: http://stackoverflow.com/questions/324831/breaking-out-of-a-nested-loop
//Vertikal
for (int i = 0; i < BOARDSIZEx; i++)
for (int j = 0; j < BOARDSIZEy - 3; j++)
if ((pieceArray[i, j] != null)
&& (pieceArray[i, j] == pieceArray[i + 1, j]) && (pieceArray[i, j] == pieceArray[i + 2, j])
&& (pieceArray[i, j] == pieceArray[i + 3, j]))
if (pieceArray[i, j].IsStarter != movebool)
found = true;
goto Done; //interesting way of getting out of nested for loop
//for more on goto: http://stackoverflow.com/questions/324831/breaking-out-of-a-nested-loop
//Diagonal, Lower left to upper right
for (int i = 0; i < BOARDSIZEx - 3; i++)
for (int j = 0; j < BOARDSIZEy - 3; j++)
if ((pieceArray[i, j] != null)
&& (pieceArray[i, j] == pieceArray[i + 1, j +1])
&& (pieceArray[i, j] == pieceArray[i + 2, j + 2])
&& (pieceArray[i, j] == pieceArray[i + 3, j + 3]))
if (pieceArray[i, j].IsStarter != movebool)
found = true;
goto Done; //interesting way of getting out of nested for loop
//for more on goto: http://stackoverflow.com/questions/324831/breaking-out-of-a-nested-loop
//Diagonal, upper left to lower right
for (int i = 0; i >= BOARDSIZEx; i--)
for (int j = 0; j < BOARDSIZEy - 3; j++)
if ((pieceArray[i, j] != null)
&& (pieceArray[i, j] == pieceArray[i - 1, j + 1])
&& (pieceArray[i, j] == pieceArray[i - 2, j + 2])
&& (pieceArray[i, j] == pieceArray[i - 3, j +3]))
if (pieceArray[i, j].IsStarter != movebool)
found = true;
goto Done; //interesting way of getting out of nested for loop
//for more on goto: http://stackoverflow.com/questions/324831/breaking-out-of-a-nested-loop
Done:
return !found;
It's at the vertical check that the error occurs and also my checkwin doesnt seem to respond to the call in the game.cs code.
//check for win
bool moveBool = true; //returns yes or no depending on whether both players have moved their pieces
if (move % 2 == 0) moveBool = false;
bool win = rules.checkWin(pieceArray, moveBool);
//The game is won!
if (win)
string winningPlayerName = player1.Name; //creating a new player instance, just for shortening the code below
if (moveBool == false) winningPlayerName = player2.Name; //if it was player 2 who won, the name changes
message = winningPlayerName + " has won the game!\n\n"; //The name of the player
Board.PrintMove(message); //Print the message
if (moveBool == true) player1.Score += 1; else player2.Score += 1; //update score for the players
//The player's labels get their update texts (score)
Board.UpdateLabels(player1, player2);
//Here, depending on what one wants to do, the board is reset etc.
else
move++; //draw is updated
And here's a picture on how it looks like at the moment.
Thanks in Advance!
Student at the University of Borås, Swedenfor (int i = 0; i < BOARDSIZEx; i++) // If BOARDSizex is the number of elements in the first dimension...
for (int j = 0; j < BOARDSIZEy - 3; j++)
if ((pieceArray[i, j] != null)
&& (pieceArray[i, j] == pieceArray[i + 1, j]) && (pieceArray[i, j] == pieceArray[i + 2, j])
&& (pieceArray[i, j] == pieceArray[i + 3, j])) // Then [i + anything, j] will be out of range.
You probably meant to add the one, two, or three to the j rather than the i. -
Asadmin admin user code and password
I'm trying to lear j2ee using System Application Server Platform Edition 8. I try to use asadmin tool and it requieres me the admin user code with the respective password, and I don't remember if it was set during setup, neither I have read in any place what it is. Can anybody help me?
Thanks in advance.Thanks!!!!, while I was waiting for an answer, I browsed the topics and voila, found the topic you are referring at now.
-
i was installed a fresh SAP B1 in my pc for testing purpose but when i try to log in,the system ask for user code and password to log in the system.
do anyone mind to tell me what is user code and password to fresh log in?
thanks.Here is the note contents:
How to find the current SAP Business One version
Symptom
How to determine which SAP Business One version, Service Pack and Patch is currently used.
Other terms
Version, help, about, search, find, Patch, PL, Service Pack, SP, Enhancement Package, EhP, SAP Business One
Reason and Prerequisites
Consulting
Solution
In order to find out which version of SAP Business One is currently used, follow the steps below:
1. Upper menu -> Help -> About.
The version, Service Pack and Patch Level are displayed in blue on the 'Version' line.
The numbers in brackets correspond to the version build which appears in the table. (see also point 2 below).
'SP' stands for 'Service Pack'.
'PL' stands for 'Patch Level'.
1. The version build can also be found by running the query below in the query manager (Reports -> Query Generator -> Click on 'Execute' -> Click on the pencil icon in the upper left corner and then in the text box to activate it -> copy and paste the query below, then click on 'Execute'):
SELECT T0.Version FROM CINF T0
Please note that the result of the query will not provide the Service Pack or Patch Level information.
From your desktop
Goto the short cut of the Business One icon
Right click
Select Properties
Click on 'Find Target'
this will open the Business One folder in windows explorer.
Go to the exe file.
Right click
Select Properties
Go to 'Version' tab
Check the file version to find the SAP Business One version
Under 'Other Version Information' -> 'Item Name' you can check
The Cluster ID, it will be A, B or C.
( Please check the Release Matrix on the SAP Service Market Place to know to which countries correspond which letter. Sevice.sap.com -> SAP Channel Partner Portal -> SAP Business One -> Product Availability -> Release Matrix)
Click on Service Pack to find the Service Pack
Click on Special build Description to find the Patch Level
let me know if you have questions
rgds,
Maybe you are looking for
-
How to count intials in a table
I have a table (4 columns) used as a roster for fundraising. The table rows (1st Col) are dates eg; 4-Mar, 11-Mar etc. Columns 2-4 contain a members initials that are rostered for that date. (See below) What i would like is to be able to have a separ
-
How to deactivate part appriser//PMS processess
Hi experts, I am unable to complete entire pms process. Im struck at end of mid year rating process. In our system there is no concept of part appriser. But some how system is showing the part appriser button as push button. I can t able to save or c
-
So out of nowhere my computer gets all these strange problems... Headache
Recently, after having my computer problem-free for quite some time now since the day I bought it, I'm starting to have problems with my Mac. Out of nowhere really, I'm getting several seemingly random problems I'll just go ahead and list: - iTunes w
-
Add new key figs or characteristics and "Repair full request"
Hi Gurus, here are my questions 1.If I add new key figs or characteristics(which are not Key fields) to ODS and Cube containing tons of data, Will the transport for structure changes fail due to presence of data? 2.The extractor to the ODS which intu
-
HT4995 Lost my friends in latitude on my ipad 2 & iPhone 3G
Lost my friends on google latitude . Now I just loop back to the App Store .