Entourage and hyperlinks

Hoping that someone can help.
I am trying to send an image and hyperlink together from entourage.
Have sent it to my email, in Safari ,but the picture appears but not the hyperlink.
Can send it on to myself in entourage, then both image and hyperlink appear.
is it just a Safari incombatabiliy problem ?.
Any help ?
Thank you .

Why would I reply to my own posting??!!

Similar Messages

CS3 - How can I preserve Links and Hyperlinks in my INDB?

I am still pretty new to ID, so please speak slowly :)
My problem - I create an INDB that consists of several indd chapters. The chapters include numerous Links (to PNG & PSD images) and Hyperlinks both to Text anchors to other chapters within the INDB, as well as to URLs. I have all items saved on my local HD. Once complete, I do "Package for Print", check the Preflight report to make sure all is OK (it is) and then save the new INDB folder in a new location on my local HD. This all seems to work just fine, BUT if I move this packaged INDB folder (such as to a backup drive, or give to another worker that copies it to their HD), upon opening the INDB file, some links and Hyperlinks are broken.
It seems that these broken Links and Hyperlinks are still pointing to the original locations on my HD. But obviously not all are, since most links/hyperlinks DO work fine. The Hyperlinks to Text anchors within other indd chapters seem to typically break. Is there a way to force these to reference the packaged assets within the INDB folder? Seems ID would be smart enough to look there itself!
Also, I was creating some Hyperlinks as "cross referenced" - that is, I created a URL Hyperlink Destination in Chapter 1 indd and then created Hyperlinks pointing to it from other chapter indd in the book. I have learned that these ALWAYS break in the above scenario, so I started creating the URL destination within the same chapter indd and pointing to it there rather than across chapters. But this is just more work to keep re-creating the same URL destination in every indd!
I'll keep running into these problems since I need to share my finished INDB with other CS3 users. I also would like to be able to do a Save As of the INDB when creating a revised, newer version, but I see this also results in the new INDB links/hyperlinks still pointing to the original INDB's assets! Any way to make the Save As update the Links/Hyperlinks in the new INDB?
Thanks greatly for any insight. I can find no help in the Help on these issues!

The title of the post is this
How can I preserve row and column addresses on multiple cells at once in Numbers?
I restated the Question as follows
Can "Preserve Row" an / or "Preserve Column" be set on multiple cells at the same time.
In both cases it is not asked if multiple cells can be set to....
That is a given.
Step back a second... It is like selecting multiple cells and setting the text color of the currently selected cells to red. This can be done. More than one cell at a time modified because they are currently selected.
Whats is being asked is: if more than one cell is selected at the same time can the settings "Preserve Row" an / or "Preserve Column" be applied. No table I put up will help with that question.
YES or NO
If YES how?

Image instead of List Name, and hyperlink the image to view 'All Items.aspx' page

Hi,
I would like remove the Page title for list (i.e., name of the list in view all items.aspx page) , and instead use image and hyperlink the image
to 'All items.aspx" page.
Using developer tool found the element (#PageTitle) and added 'Script Editor' webpart and below css script to it. I am successful in replace the
title to image, however, I am unable to add the HTML tag for hyperlink. Where do I need to add or how do I add? Could anyone help me please??
<style type="text/css">
#pageTitle
background-image: url('http://w2k81368:2116/SiteAssets/Test.jpg');
background-repeat:no-repeat;
text-indent: 100%;
white-space: nowrap;
</style>
Regards,
Sunitha

Hi Sunitha,
According to your description, my understanding is that you want to change the list title to an image.
I recommend to add the code below to the list page:
<script src="http://code.jquery.com/jquery-1.10.2.min.js" type="text/javascript"></script><script type="text/javascript">
$(document).ready(function (){
var s = "<img alt='SP' src='http://w2k81368:2116/SiteAssets/Test.jpg'>";
var $t = $("#DeltaPlaceHolderPageTitleInTitleArea span span a");
$t.html(s);
</script>
After that, the list title will change to the image and it will show allitems.aspx page when clicking the image.
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Problems with Long Interactive PDFs with Extensive Interactivity via Buttons and Hyperlinks

I have inherited a project which requires the creation of large interactive pdfs with lots of buttons and hyperlinks. I am having continuing problems with buttons not working and long periods of wasted time as attempted exports fail.
Background:
The largest books range from 264 MB to 411 MB – (764 to 1024 pages). Per book, the maximum number of buttons on each page is 16, linking separate files (subsections) in the book via text anchors. The buttons are created using Master Pages which are set for each file (subsection) in the book. 50% to 60% of the pages in each file (subsection) will also be referenced as 2 hyperlinks. One is the source page hyperlink on each workflow and the second is a listing on the source page as a possible navigation path. I have created hyperlink destinations for each page which is used to generate the source and navigation hyperlinks. With 2 hyperlinks representing 50%-60% of the pages - that means the largest book contains a maximum of 1200 hyperlinks. Each file (subsection) also has it’s own separate TOC and the bookmarks that are created (optionally) during the TOC creation process.   As currenlty formatted, the book is primarily images of workflows which mean 50%-60% of the pages contain pdf images.
Several questions:
1. How do I get my buttons to work consistently? There is nothing worse than working hard and then ending up with faulty product. I have been thinking about combining all the files into 1 document per book. Then I could change the buttons to objects, add a hyperlink over each one and set them for a specific hyperlink destination. Can I do that if the buttons are on Master Pages? Can InDesign handle a document with 1024 pages?    I can't fix the problems in Acrobat later because it would mean 1024 fixes for just 1 button correction.
2. How do I stop InDesign from freezing when exporting these large pdfs? It seems to wait until the final steps to crash which sometimes means a 4-6 hour waste of time per export.
3. Are we making a mistake using pdfs as our workflow images? I'm not pleased with the quality of the images we have and wonder if we switched to another image format if this would improve the results.   Would it be worth the effort and relinking? I have been reading different information on what the preferred source image format is for InDesign. One article I found yesterday says using pdf images is a problem. Another site said the Photoshop, TIF and JPG are preferred but PDFs were also acceptable.
4. Do I need to propose scrapping InDesign as the source of the project? If so, what application can better meet my needs?

Those are the limitations you have to put up with.
Apple doesn't follow the PDF spec. It chooses which PDF features it will support.
As to the version number (v5 or v6 or the new multimedia features in v9), there is different support in different versions of Reader/Acrobat as the product has developed. You just need to post a message to downloaders that they need to view the file in Adobe Reader version X or above to get the best experience.
Other industry standards face the same problem: How can you add new feature like multimedia? You can't always be backwards compatible.

Can't get entourage and ical to sync

Hi,
I've had a macbook for a while but got an iphone 3gs last week and I'm just trying to set it up. My addresses and contacts seem to be syncing to my iphone OK but not my entourage 2004 calendar. I have gone into entourage preferences and ticked all the synch boxes and when I open ical I have an entourage calendar but none of my appointments are on there (the only thing that is are public holidays and birthdays?).
When I tried to sync entourage with ical he just hung so I thought this may be due to number of entourage calendar entries. So I went onto entourage and changed it so that anything over 12 months old is deleted but now I have checked and I still have all my calendar entries on entourage from 2005 so that hasn't worked. How can I delete the old calendar entries?
So as I understand it in order for my calendar to be synced on my iphone it has to go through ical (even though I don't use that on my Macbook). As I can't get entourage to sync my calendar with ical I can't get my calendar onto my iphone at present which is a real pain.
Would I be better looking at mobileme or something similar or do I just need to setup entourage and ical differently?
As you can see I really need some help! All advice very gratefully received.
Cheers
Ergo

BEFORE YOU DO ANYTHING - BACK UP ALL YOUR DATA IN ENTOURAGE.
You can delete everything in iCal by deleting the calendar (Entourage or Personal or temp or whatever Calendar is there). You can delete everything in Address book either by highlighting all the contacts and hitting delete or by deleting the Address Book folder in Address Book.
The key in getting them to sync properly with Entourage is deleting all the preferences in your Library folder under <your user>. Delete anything with Microsoft Entourage in it. I also deleted iCal preferences and Address Book Preferences.
I also found it necessary to go to the Office folder and delete the sync services folder.
Also go to Entourage sync services and turn OFF syncing with iCal and Address Book. Exit Entourage.
Go to your application folder, isync - reset sync history (button at bottom of screen).
Then bring up Entourage, sync services, and reactivate syncing with iCal and Address Book.
Everything should work. I have been struggling with this the last week or two. I've had innumerable exchanges with MS who have said anything with syncing is not their problem it's an apple application. Through these discussion boards I pieced together all of the elements above. But be sure to back up anything you want to keep before you do any of this.
It should work. It did for me (at least last night and all day today). Good luck.

PDF and Hyperlinks in SRM-MDM Catalog

Hello friends,
I have done all the prerequisites that are needed in datamanager to upload the PDF's and Hyperlinks but the problem is whenever i see my catalog's search UI in that I am unable to see all the PDF links and even hyperlinks.
Please do suggest........
Regards Dollar Man

Hello Dollar man,
On the MDM Console, right click on the Repository -> Properties -> PDF -> Allow invalid PDFs -> Yes .
Give points if it is aHelpful answer
Regards,
Chinmoy

An hour ago, I accidentally deleted a "Bookmarks" folder, and all of subfolders and hyperlinks. The lost items are not in "Trash." Are they still retrievable? JAW

An hour ago, I accidentally deleted a Bookmarks folder, and all of subfolders and hyperlinks. The lost items are not in "Trash." Are they still retrievable? JAW

They don't go into the Trash. Unless you have a backup prior to the deletion time it's gone.

We created a pdf document with comments and hyperlinks. On iPad, comments/hyperlinks disappear.

Using Acrobat Pro 9, we created a pdf with comments and hyperlinks to be shared with a large community on the iPad, through a server. Once the document is opened on the iPad, all the comments and hyperlinks disappear. Are we missing a tool on the iPad or is there a different way to create this file? Thank you.

Is everyone on the iPad using the latest version of Adobe Reader mobile for iOS (10.6 at the moment)? You can see all the comments (including drawing markups) as well as view the notes attached to text markup with this version.

Table of Contents links and hyperlinks lose accuracy in FP past 5 pages?

I've come up dry searching for any mention of this bug
anywhere.
We've got Word documents that have a table of contents (TOC
created dynamically in word, using the standard "Heading" style
method.) When we convert these to Flashpaper SWFs, about 50% of the
TOC links don't work - they go sort of nearby spots in the
document, but bring you to a spot off by half a page or more. The
links to spots in the first 4-5 pages work ok, but TOC links that
go deeper into the doc - from 5 to 20 pages in - those are off by a
half page to a page. The working TOC links in Word or in PDF
versions of the doc take you directly to the right spot.
The "outline" option in flashpaper also fails - the outline
links past 5 pages or so are innacurate just like the in-document
links.
According the the (scanty) documentation for Flashpaper,
Heading/Outlines, etc. are supposed to work fine and get converted
into the SWF.
I've already tried creating fresh example files, to make sure
it isn't a problem with sloppy Word formatting, extra Headings,
etc. - no dice. I still get TOC and outline links that fail to work
in many cases. They mostly fail for things that jump to spots after
5-6 pages into the doc. But if I convert these same docs to PDFs,
the PDF bookmarks and TOC links and hyperlinks work perfectly.
We've also tried using Hyperlinks in Word to create "pretend"
Table of Contents (not dynamic, but we're desperate), and we find
that those hyperlinks that go past 5 or 6 pages into the 20 page
doc lose their acuracy also - they are a half to a full page off.
We already tried the method of saving the word docs as HTML
then converting to FP(suggested within this board) but that did not
improve things.
Thanks in advance.
- Chris

We solved our issue. In our case we have Word 2007, but our
client is still on Word 2003 so our Word document was originally
created in Word 2007 and then converted by Word 2007 into the Word
2003 format. It appears that we were having these problems because
we were running Flashpaper on the coverted Word document. A
document converted this way is internally different than a document
created by the Word 2003 application.
To fix the problem we downloaded the Word 2003 application,
created a new Word 2003 document, copy and pasted the contents of
the converted Word document into the document created on Word 2003,
and then ran Flashpaper on the new Word 2003 document. Problem
solved.

HT4864 I am using Entourage and followed all the instructions above and still getting IMAP Server error. Error msg:Security failure. Data decryption error.

I am using Entourage and followed all the instructions above and still getting IMAP Server error. Error msg:Security failure. Data decryption error.

Equipment/Functional Location Attachments and Hyperlinks Batch Upload

Hi,
We would like to upload File attachments or create Hyperlinks for a reference object in batch - an equipment using transaction IE02 or a functional location IL02. We have already tried creating an LSMW for this however attachments and hyperlinks are deactivated using the LSMW functionality.
Could you kindly advice?

Hi,
I guess you are trying to attach the Hyperlink and documents for individual objects through the generic object services(GOS).If thats the case the standard Generic object services does not support background process and hence the unavailability of the same in LSMW.
However you can create a separate custom program to create attachments to individual objects using the class and Methods associated with Generic object services (GOS).
The Method that you would need to use is "CL_BINARY_RELATION=>CREATE_LINK" associated to class "CL_BINARY_RELATION ". There are sample codes available in ABAP development forum to do exactly the same.
Regards
Narasimhan

Pop up windows and hyperlinks on websites - Virus???

I hope someone can help me with this pretty fast since I can't figure out how to fix it anywhere, and it slows down my working progress.. I recently started to get a whole bunch of pop up windows (usually when I click on a "search" window, for instance google) and hyperlinks on random words on the web-side I'm on (it can be any word on youtube, facebook, everything that usually are not a link). I've seen more people talk about macdefender etc, but I can't find this anywhere on my mac, so could it be anything else? And what should I do..?

mdscardigno wrote:
I ran Adware Medic and it did not find any adware. The problem still persists.
That is either because your problem isn't actually due to adware, or you've got some adware I've never seen, and thus have never incorporated into AdwareMedic's signatures.
First, take a look here at some alternate, non-adware-related solutions to the problem:
http://www.adwaremedic.com/kb/unsolved.php
If none of that helps, you may have new adware. In that case, take a system snapshot with AdwareMedic and submit it. I'll take a look and see what I can find.
(Fair disclosure: I may receive compensation from links to my site and software, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

If I use my iPad2 to present presentations created in MS Powerpoint, will I retain the embedded videos and hyperlinks that were created in the original presentation

I want to use my iPad2 to make presentations created in MS Powerpoint. These have embedded videos, animations and hyperlinks. Will these all work in the spreadsheet if I use Keynote on my iPad to display and present them.

I have another problem.
I have deleted all apps from my iPhone 4s and then I have changed my
Apple ID's country information from Poland to United States.
After that, I have downloaded all deleted apps.
But only few are in 'Purchased' section on iPhone!
I guess only these, I have downloaded using USA App Store, not Polish.
I am getting frustrated, because I have got too many problems with iOS
and it doesn't look it will get better... Please help me ASAP! Thanks!

Lines jump/scroll up/down in Entourage and Excel (MS 2008)

In Entourage and Excel (since the last MS Office 2008 update I believe), the tope line jumps or scrolls up (out of view), then back down into view. WhenI try to scroll up to see top line, it jitters in and out of site (up/down). It is hard to type on or work with the first line in an email message or an Excell worksheet. Also, when i move the cursor vertically (mid window), it also jitters up/down.
I do not recall exactly when this started, but it may have been when I agreed to update MS Office from a prompt a while back. Funny thing is I never recall MS Office having 'updates' before (I surely could be wrong on that!)
The jittering is driving me batty. I have rebooted system to no avail.
I'm running iMac OS 10.6.5, Intel Core 2 Duo, 2.16GHz, 3GB memory
MS Office 2008 (Entourage ver. 12.2.4, Excel ver. 12.2.5)
Entourage "Version 12.2.4 (100205) Latest Installed Update: 12.2.5"
Excel "Version 12.2.5 (100505 Latest Installed Update: 12.2.5"
Thank You

In Entourage and Excel (since the last MS Office 2008 update I believe), the tope line jumps or scrolls up (out of view), then back down into view. WhenI try to scroll up to see top line, it jitters in and out of site (up/down). It is hard to type on or work with the first line in an email message or an Excell worksheet. Also, when i move the cursor vertically (mid window), it also jitters up/down.
I do not recall exactly when this started, but it may have been when I agreed to update MS Office from a prompt a while back. Funny thing is I never recall MS Office having 'updates' before (I surely could be wrong on that!)
The jittering is driving me batty. I have rebooted system to no avail.
I'm running iMac OS 10.6.5, Intel Core 2 Duo, 2.16GHz, 3GB memory
MS Office 2008 (Entourage ver. 12.2.4, Excel ver. 12.2.5)
Entourage "Version 12.2.4 (100205) Latest Installed Update: 12.2.5"
Excel "Version 12.2.5 (100505 Latest Installed Update: 12.2.5"
Thank You

I inadvertently selected Entourage and emptied trash. How can I retrieve or re-install Entourage? Ned

I inadvertently selected Entourage and emptied trash. How can I retrieve or re-install Entourage? Ned

http://answers.microsoft.com/en-us/Search/Search?SearchTerm=entourage&CurrentSco pe.ForumName=mac&CurrentScope.Filter=&askingquestion=False

Entourage and hyperlinks

Similar Messages

Maybe you are looking for