Entourage - Appointments change when changing time zone

Hello There,
When changing the time zone in Entourage all the appointments already entered do change as well.
E.g. the appointment is 8 am. After changing the time zone by 4 hours, the appointment changes to 4 am
I don't know why that is as it does not make any sense at all. Just because you change the time zone while travelling the time of your appointments don't change.
What can I do to avoid he undesired change of appointments.
Thanks

Hi Tom!
Don't change the timezone in Entourage once you have it set. Instead, change your Mac's timezone using the Date & Time System Preferences pane.
The default timezone in Entourage is your reference point for new appointments only. For example, if you create an appointment at 9 a.m. CST, it's still going to occur at 9 a.m. CST even though you're really at 7 a.m. PST by your clock. If you intend to schedule an appointment that will occur while you're traveling schedule it for the time in your Entourage default timezone.
Hope this helps! bill
1 GHz Powerbook G4 Mac OS X (10.4.7)

Similar Messages

  • The impact of changing SAP system time zone.

    Hello gurus,
    We are in the company located in UTC+8 Time Zone. but during the system installation, the setting in SAP (tcode:STZAC) of the system time zone is CET, which is, not correct, and cause some issues: such as, when we try to send mail via SAP smtp, the sent time in the mail is always wrong.
    We tried to modify it to UTC+8, but since we already go live for several months, there're lots of application data in the system. Before that we need to make sure that this change will not affect the current implementation.
    Do you experts know the impact or risk of changing the system time zone after going live?
    Regards,
    Charlie

    Lets look at this from a logic perspective,  if your system is CET and you are moving to UTC+8 you are going a few hours ahead... so basically you'll find a gap in time in between the documents but you wont find any time conflict. So based on that it should be safe. You certainly need to check your jobs and make sure all necesary jobs will run so you can reschedule them if skipped by the time change (I guess).
    Regards
    Juan

  • Can external users change their language, time zone, and locale settings?

    Hi,
    We’re migrating our hosts from WebEx cloud to our on-prem solution right now (CWMS 1.5.1.323.A).
    We’ve learned that CWMS 1.5 does not provide an online address book where hosts could customize language, time zone, and locale settings for their external attendees.
    Do external users have any chance at all to change their language, time zone and locale settings individually?
    Thank you,
    Helge

    Hi Dejan,
    "external users" are those participants, who do not have an LDAP account in our deployment, since they are not intendet to act as hosts: our stakeholders, partners, customers, clients.
    It looks, as if these people would stick to the systems' default language / time zone / locale.
    We are wondering if there might be a CWMS-component like this:
    https://artcom.webex.com/cmp0307l/webcomponents/widget/preference.do?serviceType=MC&siteurl=artcom&target=Page&backUrl=%2Fmw0307l%2Fmywebex%2Fdefault.do%3Fsiteurl%3Dartcom%26service%3D1
    to allow those "extenal" participants to make their adjustments.
    Thank you,
    Helge

  • IPhone Date & Time keeps changing to "Cupertino"  time zone

    Hi
    Every time i change my Time Zone in Settings>General>Date & Time to "London,United Kingdom" it correctly changes to "London" but if i exit Settings and navigate back to Time Zone settings it has changed to "Cupertino".
    This effects World Clocks and other apps which is most annoying.
    I have firmware 2.0(5A345) installed on the iPhone. Is there a way to upgrade this? Will i lose all my current data if i do a firmware upgrade? Will it even fix the issue?
    Please help, there are currently 2 options I have. Find a fix or move to Cupertino so that my iPhone displays the correct time.
    Is there a less drastic option?
    Thanks in advance!

    If i do that it states that i am running the current version. Maybe because it is a revision and not a proper update.
    My twin brother also has the the version that you have (54347).
    Apparently it updates the firmware when you do a "Restore" through itunes but that will wipe the phone clean of everything. I don't mind doing this as long as i can transfer my backed-up content but if i do a "Restore from backup" to tranfer all my settings etc i have a feeling it will revert it back to the firmware that the iphone was running when it was backed up. Hope that makes sense!
    Thanks

  • Changing BO Server Time Zone

    Hello,
    When we refresh report and displa last refresh date in it, the date/time displayed is GMT. We want to display US EST. We want to do this as server level as opposed to having each user change it from their preferences.
    Our BO server OS is Linux and our Linux team has changed the BO server box time zone to US EST, But we still see GMT. We are on BO XI R3 SP2 FP2.5 and web server is Netweaver. BO and web server are installed on the same box.
    What are we missing?
    Thanks,
    Nikhil

    What is the time zone set on the Web and App servers?
    If you go InfoView and CMC preferences, you should see the Time Zone field. What is the value in that?
    In the Web and App server if it is set to EST, make sure you have time zone set to Default - Local to web server in CMC and Infoview preferences.

  • Capture Time Changed by System Time Zone?

    Hi All,
       In Lightroom 1.4, changing the system time in Windows XP changes the capture time!
       This seems crazy...I take photos in different time zones, and have the camera set correctly in that timezone (or adjust it to be correct in Lightroom). I'd rather not change my system timezone to "Bangkok" to correctly see data for photos from Thailand.
       Anyone have a solution or workaround? Is this fixed in LR 2?
    Thanks!
       Alex

    This post seems to explain a lot.
    http://www.lightroomforums.net/index.php?topic=359.msg13336#msg13336
    So I'm stuck having Lightroom adjust times based on the timezone of my OS? Or is there a workaround?...maybe saving and re-importing metadata? (Can't get this to work either, even using some complex procedure I found using Exiftools and a batch file...)
    I can understand the capture time relying on the OS for timezone at the time of import, but Lightroom should not continuously adjust it every time you view...
    Thanks,
       Alex

  • How can I change the default time zone in ICloud?

    I'm in the UK but the only ICloud time zone I'm offered is the Pacific.  I'd be grateful for suggestions on how to sync my calendar in the week view with BST. At present the nearest I can get is the Azores.
    Thanks.

    Log into icloud.com, in the  account setting click onto the timezone.
    click onto the map close to your home town.
    Press the button below the map for a full list of time zones at the same meridian/longitude and select the closest city.
    Regards
    Léonie

  • Creating appointments in a different time zone with accuracy

    I have my computer setup to set the date and time automatically. I also have iCal set to my current time zone. How do you create appointments for times in a different time zone with accuracy while you are in your current time zone?
    For example, when I prepare for a business trip, I set my agenda in iCal while I'm at home. All of these appointments show up in my current time zone. When I get to my destination the times for my appointments are incorrect. I live in New York, but have a meeting in LA. The meeting is at 8:00 am PST. When I'm home, I set the appointment for 8:00 am, but by default, it is EST. When I get to LA, even if u change the time zone settings, the appointment shows up as 5:00 am PST. Do I need to set the appointment for 5:00 am while I'm at home in New York to take into account the time difference? Seems confusing and difficult to manage on a continual basis.
    Any suggestions?
    Mac

    To elaborate further - what the current iOS manual says about times zones is:
    _*When Time Zone Support is on, Calendar displays event dates and times in the time zone of the city you selected. When Time Zone Support is off, Calendar displays events in the time zone of your current location as determined by the network time.*_
    Does that mean with time zone support off that when you move from one time zone to another and your phone readjusts its time setting that the appointment times are changed also or does it mean that the assumption is made that the event time is to be left as is. I believe it is the latter, but the description makes it sound to me like the opposite.
    I do know that if one has time zone support enabled and you are in FL with an appointment with a California time zone enabled the time shown for the event will be 3 hours later. The description seems to say the opposite, but that was my experience in the past. In addition if time zone support is enabled and you change time zones, the time shown for the appointment will be changed.
    For me at least a much clearer descrpition of what time zone support does is needed.
    +*We need a checkbox that says adjust appointment time to correspond with time zone you are in in comparison to zone of event, and a checkbox that says:absolutely don't change the times I enter for events.*+
    Message was edited by: waldhaus1

  • Get date from Oracle when local time zone is different from Oracle time zon

    Hi!
    Local machine time zone= +2
    Oracle time zone= +1
    I set date to Oracle using java.sql.Date.
    From application I save date at 00:30 clock and send e.g. 28.06.2002, but in Oracle date is save as 27.06.2002 01:00 (hour=01 , I suppose that is because java.sql.Date hasn't time the Oracle set it time = time zone=+1) And when I get date from Oracle I get incorrect date. In SQL I don't use date masks. Maybe solution is to use java.sql.Timestamp object (when save date to Oracle) instead of java.sql.Date?
    But if I save date at e.g. 01:00 clock and send e.g. 28:06.2002 in Oracle, date is save as 28.06.2002 01:00 and when I read from Oracle I get correct date.
    Thank you.

    Hi!
    Local machine time zone= +2
    Oracle time zone= +1
    I set date to Oracle using java.sql.Date.
    From application I save date at 00:30 clock and send
    e.g. 28.06.2002, but in Oracle date is save as
    27.06.2002 01:00 (hour=01 , I suppose that is because
    java.sql.Date hasn't time the Oracle set it time =
    time zone=+1) Presumably you are using setTimestamp() to store the value. If you are explicitly using a varchar (string) then you will have to correct the timezone your self.
    And when I get date from Oracle I get
    incorrect date. In SQL I don't use date masks. Maybe
    solution is to use java.sql.Timestamp object (when
    save date to Oracle) instead of java.sql.Date?The method setDate/getDate store a 'date' which is not the same as a 'date and time' for which setTimestamp/getTimestamp are used.
    But if I save date at e.g. 01:00 clock and send e.g.
    28:06.2002 in Oracle, date is save as 28.06.2002
    01:00 and when I read from Oracle I get correct date.
    Thank you.

  • Position of items in a region changes when changing region display point

    Hi all,
    I encounter a strange behaviour of items when changing the display point of a reports region from default (Page Template Body (3)) to anything else.
    If set to Body (3), my items are correctly displayed above the report, but else they are displayed below.
    Changing the sequence numbers does not affect this.
    To clarify what I mean I created a sample application:
    http://apex.oracle.com/pls/otn/f?p=16478:1
    Is there any possiblity to influence whether items in a reports region are displayed below or above the report table? - I did not find anything...
    TIA,
    Felix

    If you read the description of those other regions you'll clearly see "items below region content" rather than "items above region content", like the page template body region #3.
    This is one limitation of the ApEx region templates that some would like to see improved - meaning, allowing for more flexibility.
    Earl

  • IMac recognizes old time zone, when auto time zone is on

    Just moved from Japan to Texas.  iMac thinks it's still in Japan, Zama-shi to be exact.  That was my old town.  I'm using a local ISP cable internet.  I'm pretty sure it's not a coincidence that my new ISP would have it's server in Japan.  Does anyone know how to fix this.

    Have you tried choosing a texan Time Zone?
    Sys Prefs>International>Formats>Region, what is set there?
    Open Terminal and type in...
    date
    Hit enter, what does it report?
    Thu Feb 21 16:13:20 PST 2013
    Then try...
    date -u
    Fri Feb 22 00:13:49 GMT 2013

  • Fontface changes when changing html of text

    I have a textfield nested in a symbol and am using an Adobe web font (droid-sans). When I change the text inside the textbox with something like the following:
    sym.getSymbol("captionButton").$("textBox").html("Hide Captions");
    the fontFace APPEARS to go to some other sans font and seems bold from that point forward. Do I need to reset all the css properties of the fontface every time I change html text in a textbox. And if so, could someone tell me the correct sytax, given the action above?
    Thanks.

    You mean I have to break it again ;-) OK, I'll try to find a previous version. OK, I commented out the css setting on init and the css settings when the caption button is clicked.
    whoops. looks like a bad upload. I'll try again in a few minutes.
    OK, uploaded. Sorry I had to include some assets just so it would load but it's all in a zip file. Ironically, downloading it to test it, it doesn't change to bold but it does seem to change fontfamily so the concept is the same.
    https://www.dropbox.com/s/wzr5s3nb12uccu4/sample.zip

  • What are the things to be changed when changing page name, model, jws, etc?

    Hi Everyone,
    My jdev version is 11.1.2.3.0.
    I have developed one ADF application with one page and it is working fine.
    Now i need to change my page name so i modified and it is also working fine.
    But while deploying it gives error like model-viewcontroller already exists because previous application without changes is already there in server.
    without disturbing the previous application i need to deploy this changed application as a new application to the web logic server.
    For that what are all the changes i need to perform and where to perform?
    Please give suggestions.
    Thanks.

    You only need to change the webroot and the application name (you may try with the same application name, but I', not sure it works then).
    When you then deploy the server take the ear a new application.
    Timo

  • Why do my video timings, specially in the parts where there are titles get changed when changing the format in a file converter?

    Hi, i am currently working on a project in NSTC format but seem to have a technical problem. I have exported it (in wmv.) but i want to convert it to MP4 (iPod) and DVD format. Now, I have tried to convert the video with many pieces of software and they all seem to change my timings (e.g a title is shown before it should). This doesnt happen in the .wmv file but it seems to happen on both DVD and NSTC. Am I doing something wrong in premiere or is it another problem?
    Thanks in advance

    I am not sure that I am following. You have a Sequence in PrP, and have your Titles positioned and their Duration set, as you need. (I'm assuming Lower Thirds, or similar). Your preview verifies that everything is proper and satisfactory. Then, when you Export to certain formats, the Titles have "moved," so that they no longer accompany the proper visual from, say Video Track 1. Is that correct? If so, I am sorry to say that I have no idea how that could happen. I just want to get clarification on the exact problem, and will consider what could be afoot. Also, others will likely benefit from a bit more info.
    Good luck,
    Hunt

  • Automatic batch change when change in stock happened.

    hi dudes,
    i am having the requirement like when ever change in stock for a material after GR or GI, the batch number should be changed for whole quantity.
    plz respond asap with an advice.
    thanks and regards
    Robert.

    Get a Z program developed which gets trigerred when a Batch GR or GI is happened, this Z program should create a new batch, copy the characteristics of the old batch, and do a batch to batch transfer of stock for that material from old batch to new batch.
    Or to post a GR and GI you mean when GR is done to the same batch.
    Get a Z transaction for GR and GI with the link to the above scenario.

Maybe you are looking for