Entourage rules won't run automatically

I've crossed the divide and gone to Apple. I get a lot of email and on my pc I kept it all organized as it came in. Now though, with Entourage I can't seem to get the mail rules to run automatically. I have all the rules enabled but they only work if I go to <apply rules> and click on the specific rule. It does nothing if I click on <all rules>. Any suggestions?

Have the rule run correctly in Entourage before and suddenly stopped working? Or, have they never run automatically?

Similar Messages

HFM rule won't run against ECA

I have a very simple rule in HFM v11.1.2 that runs against ECA, but won't execute during normal consolidation, it will only execute by using a force calculate command. Any suggestions to allow this to run during normal consolidation? The data in the 1750_3P account is being populated by rules, not by a posted journal.
Here is the rule:
If pov_scenario = "ACT" and is_base = True and pov_value = "<Entity Curr Adjs>" Then
HS.Clear "A#1750_3P"
End If 'pov_scenario
Thank you,

Hi HTM_Ptc,
What is is_base referring to ? This rule should be run during calculation. Or if it still unsuccessful, would you try using this :
IF strYEar = " " AND strPeriod = " " AND strScenario = " " Then
Select Case Hs.Value.Member
Case "<Entity Curr Adjs>"
...[your clear statement]
End Select
End IF
Thanks,
Anna

Business Rules won't run

in Essbase 9.3 on Enterprise View, Business Rules, Repository view, Projects NONE of my scripts will launch. i can sort of open and but they won't execute. i can copy but i can't run them. i'm dying here because i have got to copy a version to version
so, question 1 is how to get the business rules to work?
and question 2 is what's the code (i know it's really really simple) to copy one version to another
help!

Restarting services is always a good thing to try, Also I recommend logging into My Oracle Support and having a read of doc id - 763345.1
It goes through different options for resolving business rules issues.
One example to copy version is :-
DATACOPY Working TO Final;
You may want to put a FIX around it to restrict what you want to copy.
More information on DATACOPY is available at :- http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/html_esb_techref/calc/datacopy.htm
Cheers
John
http://john-goodwin.blogspot.com/

Script won't run automatically

I use Image Capture to download photos from my camera. I have set it to run an Applescript after download to rename all the downloaded files. The Applescript icon appears briefly in the dock but nothing happens. I have inserted a display dialog at the beginning of the script but it doesn't display. I have wrapped the script in Try/on error, with a display on error, but nothing appears. The script runs perfectly when run manually.
Any suggestions?
AK

The script is begins with "on run" and ends with "end run". It is saved as an application.
When Image Browser starts with a camera connected (in fact it auto-starts because the camera is connected) in the top pane of its dialog box there are two pop-ups, one to select the target directory and the other to select post-processing. The latter has options such as preview, crop, fit ... and "Other". Selecting Other allows you to browse to an application, in my case the saved script. Underneath this pop-up is written "occurs after downloading".
The pictures transfer, the AS icon appears in the dock and bounces a couple of times then goes away again without having done anything. I have just tried it with a couple of pictures, and get the impression that its appearance in the dock was shorter than last time I ran it, when there were 120 pictures in the download folder. This suggests (if true) that it is iterating through the files in the directory.
In case anyone can spot something stupid I'll paste the script below - but it works stand-alone.
AK
click here to open this script in your editor<pre style="font-family: 'Monaco', 'Courier New', Courier, monospace; overflow:auto; color: #222; background: #DDD; padding: 0.2em; font-size: 10px; width:400px">on run
try
set ThePath to "AKMacHD80p_1:Pictures:*IST:Incoming"
set TheFiles to list folder ThePath without invisibles
repeat with ThisFile in TheFiles
set CharList to characters of ThisFile
if item 4 of CharList is "P" then
set item 4 of CharList to "R"
renameFile ThePath & ":" & ThisFile to CharList as string
end if
end repeat
on error BadThing
display dialog BadThing as text
end try
end run</pre>

Why won't Mail.app rules won't migrate, System Tiger to System Leopard?

Hi,
Mail.app rules won't migrate from System Tiger to System Leopard.
Here's what I did:
-- Clean install of System Leopard 10.5.6 onto a new Mac Pro.
-- Used Migration Assistment to move files from System Tiger to System Leopard 10.5.6.
-- Mail.app's rules failed to migrate.
So, I manually finder-copied MessageRules.plist into the proper folder to replace the newly created and empty rules set in System Leopard's mail.app, and afterwards, the rules then showed up in mail's preferences.
However, the "manually migrated" [finder copied] rules won't run.
In order to narrow the scope of the problem, I moved the former System Tiger's mail.app rules to the desktop and allowed mail.app to re-create a new rules plist file, then I created a test rule and it worked.
Questions:
Why won't System Tiger's mail.app rules files migrate to System Leopard, and won't work upon manual migration?
What is the remedy to "properly import" the rules to the new [System Leopard based] mail.app, or to make the manually moved rules plist file work?
For what it's worth I did follow the procedures at
http://discussions.apple.com/thread....9306&tstart=90
in order to make the messages migrate, but that failed to affect the rules.
Thanks much,
Jack

Here's the fix, along with recommendations for Apple programmers.
http://www.macfixitforums.com/ubbthreads.php/topics/463491#Post463491

How do I make the plugin run automatically when a photo is imported?

I am trying to write a new plugin where the metadata will be automatically added to the photo when I import the photo in the Lightroom.
How do I make the plugin run automatically when a photo is imported?
Thanks for your help!
Regards,
Prosenjit

psaha84 wrote:
What I want is, when I import a photo in Lightroom the plugin will run and assign the metadata.
As John said, there is no mechanism to receive notification of import. The likely recourse is continuous polling (unless you get very creative..).
You can try optimizing. e.g.: every second (or less), see if the count has changed, if it's gone up, something's been imported, if not then probably not (check anyway once in a while..).
psaha84 wrote:
How do I save the custom metadata with the image file?
Lightroom 5 has the limitation, plugin cannot link the custom metadata fields to XMP file or save them with image file.
So, is there any alternative way to save the custom metadata?
Yeah: Lightroom won't save custom metadata in xmp, nor read it if it's there, so you are pretty much on your own - you can save in a file, but if you save as non-standard sidecar Lr won't attend to it like it will jpg or xmp sidecar. For that reason it's often better to save in a separate dedicated location. You can save in image file itself, e.g. using exiftool if raw file, but that would make me nervous, and of course you'd have to have the logic to read it somewhere too..
Good luck,
Rob

HT1776 Mac won't sleep automatically

Despite attending to all of the issues mentioned in this article, my machine won't sleep automatically. However, I've found that using SleepNow (http://www.dragonone.com/products/macosx/pleasesleep/) works like a charm. Apple should do something similar.

Wow thank you. I have been struggling with my macbook for about a year with this issue. Even after complete reinstall of the system, on new hard drives etc. nothing seemed to work. It drove me nuts coming back to my computer 2 hours later to find it completely dead because the computer would. not. sleep. ever!
This free simple tool took about 15 seconds to get on and running, and problem gone. Thanks so much.
Apple get on this...

Report is run automatically before submit process

Hi,
I am navigating from logon page to my 1 page where I have my search criteria for my report. Unfortunately the query is run automatically. It should wait till I will fill in my criteria and then press submit button to see the results.
Could you please tell me what shoudl be done to don't trigger my report when navigating from logon to 1 page?
Regards,
Beny

Here you have my query:
select transaction_id AS "Transaction ID",
to_char(insert_tms,'DD-MM-YYYY HH24:MI:SS') AS "Insert Date/Time",
to_char(start_tms,'DD-MM-YYYY HH24:MI:SS') AS "Start Date/Time",
to_char(end_tms,'DD-MM-YYYY HH24:MI:SS') AS "End Date/Time"
from table(trans_rep_sql2tab(:P5_DB_SCHEMA,:P1_OWNER_NM,:P1_TABLE_NM,:P1_TRANS, to_date(:P1_START_TMS,'DD-MM-YYYY HH24:MI:SS'), to_date(:P1_END_TMS,'DD-MM-YYYY HH24:MI:SS')));
All parameters coming from 1 region that contains search criteria.
I understood that I can put in DISPLAY CONDITION if not null :P1_TRANS, but then if I won't put any value into this textbox I will never see my region 2 and no results from my query that can get rows even if textbox 1 is empty?

Run automatically several software metering

Hi,
I have 289 Rules in my software metering.
I want to run automatically this reports "Computers that have run a specific metered software program" with each of my rules of software metering.
I'm a dummies in SCCM Repports and SQL, can you help me please ?
Thank You
PS : Sorry for my English

You could also create a custom report that will use a SQL cursor (http://technet.microsoft.com/en-us/library/ms180169.aspx) that enumerates all metering rules first and then runs
the report you mentioned for each metering rule found.
Torsten Meringer | http://www.mssccmfaq.de

De authorizing a computer that won't run QT

How do you deauthorize a computer that won't run quicktime, causing itunes not to launch?
Or better yet, how do you fix quicktime so it works, allowing itunes to run in the first place.

Thanks for your reply!
My OS is posted along with my original post... XP pro... But is at the SB2 with all the latest updates via automatic updates. I can't seem to properly uninstall quicktime, as it gives me an error, and re installing gives an error as well, but I don't have those errors readily available to post at this time.
Running QT itself provides no error information. It simply doesn't run! When launched, I get an hourglass for a few moments, and it's done! That's it.
I had downloaded the latest at the time the other posting was made. I'll try again with the latest. I Don't expect any improvement.
Perhaps I'll use your recommendation and deauthorize all, and re authorize those that still work. I'll likely need to reformat and install everything on this system to get it working again as it looks.

Why my Mac won't connect automaticly to Wifi from boot or when waking from sleep?

Hi!
I have 2TB Time Capsule with bridged WiFi.
When I reboot or wake up my MBP from sleeping it won't connect automaticly to my Home WiFi network. I allways need to connect by hand. This problem has been in the Os X Lion and Os X Mountain Lion.
Any other WiFi networks don't have this problem, only with Time Capsule.
Time Capsule has 7.6.1 software and also older software's had this exact same problem
My MBP is:
2.3GHz Intel Core i5
8GB 1333 Mhz DDR3
And the WiFi chip is:
Card Type: AirPort Extreme (0x14E4, 0xD6)
Firmware Version: Broadcom BCM43xx 1.0 (5.106.98.81.20)
Does anybody else run in to this kind of problem?
Oh and everything else with WiFi is working normally (Phones, iPad's etc even PC's =) )

I was having this same issue with a brand new 2012 MacBook Air after updating to Mountain Lion and using an AirPort Extreme. Most times waking from sleep would result in a lockup as the system would continously try to find my network (the WiFi menu would just keep cycling). After going to 10.8.1 it still continued so I started looking at other possibilities. I noticed that the security setting on my AirPort Extreme (current generation) was set to WPA/WPA2. I changed it to WPA2 and the problem so far (2 days in a row) has gone away.

Class LED project won't run

Hi Everyone,
I am in an introductory electronics class in college and we had to draw a schematic of a simple LED board from a solder practice kit. I had already bought the student version of Multisim, so I thought I would use it to draw the circuit. I would like to simulate the circuit with the software, but do not understand why I can't make it operate like the physical board. I can't even get any of the LED's to light up on the simulation. I think that by the end of the next few semesters I will be able to figure it out, but right now I don't have a clue.
There were a couple of parts that were slightly different, because the student version didn't have the components.
The assembly instructions called for:
(4) 100 ohm 1/4w Resistor
(1) 1 K ohm 1/4w Resistor
(1) 2.2 K ohm 1/4w Resistor
(1) 10 K ohm 1/4w Resistor
(1) 330 K ohm 1/4w Resistor
(1)100 ohm 1/2w Resistor
(1) 1 uF Capacitor
(1) .01 uF Capacitor
(1) 1N4001 Diode
(1) 1N4735 Zener Diode
(1) PN2222 Transistor
(1) 555 IC
(2) 74LS107 IC
(1) 9 V batery
(2) Green LED
(2) Red LED
A couple of things that I chose for components that were different were the 100 ohm resistor was suppose to be 1/2w instead of 1/4w, could not see any place to change that. I used a 555_Timer_Rated from the list of 555s. I used a 10 nF Capacitor instead of a .01 uF because it wasn't listed. Also instead of the 74LS107, I used a 74LS107D, which appeared to be a surface mount version from what I could make out from the data sheets I found on them. The one diode that I used was a 1N4001GP and the Zener that I used was a 1N4735A.
The LEDs are suppose to flash in sequence and turn off in sequence. The physical board I used to draw this with worked fine.
I don't have to show a working simulation for my class, I just want to know why it won't run. I retraced all of the connections, but I still might have messed up somewhere.
Any help on this would be greatly appreciated.
Thank you
Attachments:
AssemblyAndMeasureCurcuit1.ms10 ‏214 KB

I have examined the circuit you submitted; A bit hard to understand since the circuit is draw in a none formal way; All the same I note the following:
GND on IC1 is not connected; run electrical rule check to spot such problems;
CLR lines on IC1 and IC2 are unconnected;
In a practical circuit such pins take on a value of logic 1;
In this case the simulation is taking a value of logic 0, I suspect.
Connect manually to Vcc to put them on logical 1;
IC1 pin 3 (1J) goes correcttly to IC2 pin 11 (2K);
But pin 2 (~1Q) should go to IC2 pin 8 (2J);
But you have taken yours from IC1 pin 7 (~2Q);
Going by the previous stage connections i.e. for
IC2: 2Q --> 1J; ~2Q --> 1K; 1Q --> 2J (IC1); ~1Q --> 2K (IC1);
For IC1: 2Q --> 1J; ~2Q --> 1K; it follows that 1Q (IC1)--> 2J (IC2); ~1Q (IC1) --> 2K (IC1);
With the above changes the circuits seems to work i.e. flashing LED. I have cleaned up the circuit to remove a lot of lines and connected the GND on IC2 and CLR lines on IC1 and IC2. I have also put in an oscilloscope so that you can observe the waveform on LED4. The circuit is attached. Thanks.
JSJD
Attachments:
AssemblyAndMeasureCurcuit2.ms10 ‏233 KB

Old Flash in new Firefox won't run, no warnings.

Opened my laptop using a current version of FF but with Flash 11.9. Viewed one of my pages with Flash content and.... nothing, just an empty div. No warnings that Flash was out of date, etc. So if I have this right FF won't run out of date Flash for security reasons. Fine. I've always seen warnings in these cases. But apparently if Flash is old enough FF just doesn't bother. Visitors have no idea what is happening. It just looks bad.
Is this correct? What is the recommended way of dealing with this from a developer's viewpoint?

We strongly recommend that users always run the latest version of Flash Player. Running an old version puts users at risk for malware infection. The vast majority of users are opted in to background update and are kept updated automatically, but there are users that for whatever reason have chosen to stick with an old, vulnerable version of Flash Player. While this is a bad idea, people are certainly free to do it. The upside is that the affected population that you're describing is pretty small.
The upgrade story will actually get better over time. The latest versions of both Google Chrome and Internet Explorer include Flash Player as a built-in component, distributed with the browser. Users are always updated with the latest version of Flash, and new updates are delivered inline via the Chrome updater or Windows Update respectively. Mozilla has spent a few years talking about how Flash needs to go away, while the other browser vendors have been investing in modernized plug-in interfaces and improvements in plug-in security, and unfortunately the prioritization is showing in the user experience. We're hopeful that Windows 10 will pick up the majority of the WinXP and Vista stragglers as well as many of the Win7 - Win8.1 users, which means that the whole Flash update problem for a very large population of people will be solved in IE once people upgrade.
It's hard to say what's at the root of the specific issue you're describing. With the major browsers on 4 or 6 week major update cycles (we publish monthly to ensure we can catch and address any new injections in the browsers that might come up in nightly/beta versions before they hit the general population, and to align with Microsoft patch tuesday), so you're talking something like 18 months worth of changes between the Firefox version you're running and the version of Flash that you're running. Everything at Mozilla gets done with bugs, and we'd definitely encourage you to file a bug on the user experience that you're seeing. They've been operating from a reactive place lately, and some of the changes that impact Flash definitely appear to be a little slapdash. It's ultimately good for them to hear from the developer community and not just me all the time, but feel free to add me to the CC: list in the bug.
We ultimately have no control over the longevity of a particular build of Flash -- there are way too many external variables -- and we're also investing a huge amount of effort in proactive security work (and it's been our top engineering priority for years). So each build usually includes large numbers of changes designed to either harden the player or address responsibly disclosed issues from researchers, the larger security and computer science communities and whatever the latest auditing and testing tools we can get our hands on are. The continuous stream of innovation and ingenuity in the offense space is impressive, but keeps us pretty busy. Browser-side changes can easily break older versions of the plug-in, and running an old version is just a bad idea.
So we've really streamlined the installation process to keep people on current versions, and Windows 10 will hopefully be a massive shift away from older, more vulnerable versions of Windows. The landscape is so different than it was even 4-5 years ago.. the days of running anything for years (or months) in your browser are long gone. The pace isn't going to slow down anytime soon, either.

Really Wrong! Finder AND all Apps won't run on MB Pro 20-day old Laptop

Finder won't launch automatically (dock icon indicates it's NOT running even though there are folders and files on the desktop that are click-able (and thats as far as they go), and every single app I try to start warns "You can't open the application (Null) because it may be damaged or incomplete." My first idea was to launch Onyx to do a thorough clean-up/tune-up, but it won't launch either.
I would appreciate and advice or suggestions of action to get things back on track.
PS this MacBook Pro 17" is only 20 days old at most.
H E L P! I need to get some work done today! Please help.

Start up holding down the shift key until you get to the gray screen with the gear. It will boot into safe mode, excluding all third-party extensions. It will also run a file consistency check, so it takes a while to boot.
Have you done anything to change permissions or run any of the "maintenance" routines in Onyx?
If it doesn't boot into safe mode, try booting from the install DVD and check the disk with Disk Utility. The installer will start and after you select the language, you will have access to the menus. Disk Utility is in the Utilities menu.

Firefox won't run why not?

Today is 9/8/10 this morning I used Firefox and it worked fine but later this evening no matter what I try Firefox won't run. I have yet to try deleting Firefox and re-installing it I would like to avoid this so I dont loose my history or my favorites

A possible cause is security software (firewall) that blocks or restricts Firefox without informing you about that, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox.
See [[Server not found]] and [[Firewalls]] and http://kb.mozillazine.org/Firewalls

Entourage rules won't run automatically

Similar Messages

Maybe you are looking for