Entourage won't work after migrating to OS10.9.1

I recently migrated my Office 2008 stuff to OS10.9.1 now running Office 2011 but when I try to open Entourage the error message says that the data in the user folder can't be used to run Entourage. Is there something I need to change in the Microsoft Database Utility window ?

Mail, the application, should not cannot contain any message data assets. The Mail application must sit in the Applications folder, and be usable to every User Account on the Mac, and not just yours (understand you might be the only user, but making a point).
Mail, the folder of data for just your emails, should properly be at Home/Library/Mail.
Let me ask again -- in the Applications folder is there an Icon for Mail, and is it the Icon of a postage stamp, or is it perhaps the Icon of a folder?
However, let me note, that now that I have booted back into Snow Leopard, and used Get Info on the Mail Icon in the Applications folder, it is reported to be 77.5 MB! Looking at it from other boot volume (Leopard) does not see all the elements of its "package" apparently. My apologies.
Now it is time for a different test -- Create a New User Account, and as that New User launch Mail and try setting up one new email account - if POP select to leave messages on the server. See the following if not familiar with adding a new user account:
http://docs.info.apple.com/article.html?path=Mac/10.5/en/8235.html
The reason for doing this is to test the Mail app itself, and not to permanently switch to a new user account. Tell me if the behavior continues in that New User Account with Mail?
Ernie

Similar Messages

  • Mail Clean Install Help: Mail Won't Work After Migrating to 10.6 from 10.4

    I cannot get Mail to open after migrating from 10.4 into 10.6. Mail tries to import my 10.4 folders and messages and then quits unexpectedly. I want to do a clean Mail install to see if I can resolve the problem, but don't know how to do so.
    All advice is greatly appreciated.
    -Brian

    Mail, the application, should not cannot contain any message data assets. The Mail application must sit in the Applications folder, and be usable to every User Account on the Mac, and not just yours (understand you might be the only user, but making a point).
    Mail, the folder of data for just your emails, should properly be at Home/Library/Mail.
    Let me ask again -- in the Applications folder is there an Icon for Mail, and is it the Icon of a postage stamp, or is it perhaps the Icon of a folder?
    However, let me note, that now that I have booted back into Snow Leopard, and used Get Info on the Mail Icon in the Applications folder, it is reported to be 77.5 MB! Looking at it from other boot volume (Leopard) does not see all the elements of its "package" apparently. My apologies.
    Now it is time for a different test -- Create a New User Account, and as that New User launch Mail and try setting up one new email account - if POP select to leave messages on the server. See the following if not familiar with adding a new user account:
    http://docs.info.apple.com/article.html?path=Mac/10.5/en/8235.html
    The reason for doing this is to test the Mail app itself, and not to permanently switch to a new user account. Tell me if the behavior continues in that New User Account with Mail?
    Ernie

  • My itunes won't work after migrating?

    Hello,
    I used migration assistant to transfer over my old computer which was at 10.5.8 update wise and I can't remember what version of itunes I was using.
    Anyway I went to try and use itunes on my new 27" i7 iMac and when I click on the application it says something about it was created by a newer library and can't be opened or something to that effect. I had to create another user account when I did migration assistant as I migrated all my old computer files wirelessly as I didn't have the right Firewire cord.
    My old user name was Pink Tuley and my new one is Tuley. When I log in I log into the Pink Tuley account as that is where all my files are so it is this itunes I am having an issue with (which is where all my songs are etc.). How do I fix this problem?

    All I had to do was update to 10.6.3 and itunes seems to be working fine now.

  • Has anyone got Push mail to work after migration t...

    Has anybody sucessfully got Push mail working after migration from BT Yahoo mail to the new BT Mail server?
    I'm still on the old BT Yahoo mail server and Push mail works fine on my iPhone
    But people have told me that once migrated to the new BT Mail server, Push mail isn't available
    BT tell me that it is, but there's a couple postings on the web saying Push mail won't work
    So, my question is, is there somebody out there who who has been migrated to the new BT Mail server and who can confirm they can still get their @btinternet.com address post-migration to work as Push mail on their iPhone or ipad devices?

    There is no push mail on BTMail. Once you have been migrated to BTMail you will need to have your devices fetch emails. There is apparently no plans to change this.

  • External keypad won't work after installing OS 7.

    External keypad won't work after installing OS 7. I have a "Zagg" keyboard that won't pair now to OS 7,...Why?

    They do work. I have one and mine is working. Have you tried to reset your iPad? HOlding down teh sleep and home keys until it reboots then try pairing again.
    A slightly more drastic thing is to go into the settings and reset all settings. THe downside, you will need to retweak your device but it can help fix keyboard glitches.

  • "Find Form" calendar is not working after migration

    Hi,
    We have migrated from Oracle 9i to 10g.we have one form ''FormA" and "find form" for that FormA.Calendar functionality is present in both FormA and "Find FormA".if we try to use calendar functionality in "Find formA",its giving error like FRM-40104 - No such block calendar,FRM-40105(unable to resolve reference to item claendar.cell1.........),FRM-41045 (cannot find item - invalid id).Actually this scenario is not working after migrating the FORMS application to 'OAS10.1.2' from 'OAS904' .
    In 'OAS904' ,The calendar item is present in the 'FormA' form, the 'calendar.show' hides the "Find FormA" and appears in the FOrmA and uses FormA's calendar item and after selecting the date,the date s applied to the "Find FormA"
    But after migration, the "Find FormA" is not hiding, so its not able to retrieve the calendar properties.Because the calendar is present in "FormA".
    Any problem with pll files like 'qmslib65','qmsolb65',qmsevh65'??
    please help me by providing suggestions.
    Thanks

    qmslib65','qmsolb65',qmsevh65Are these libraries self-written or from some third-party tool?

  • Quicktime won't work after lion upgrade

    quicktime won't work after installing Lion

    I am having the same problem. Anyone else have this problem and find a solution??

  • Printer won't work after installing mountain lion?

    printer won't work after installing mountain lion?

    Assuming you've first checked Software Update to see if there are any updated drivers and it's still not working, you could try resetting the printing system.
    System Preferences>Print & Scan, Control+Click or Right Click on a printer on the left and select 'reset printing system'. All printers will be deleted and need to be added again.

  • Mission Control won't work after sleeping.  Upon Start up it's fine, but after sleeping it won't work by track pad or keyboard.

    Since updating, Mission Control won't work after sleeping.  Upon Start up it's fine, but after sleeping it won't work by trackpad or keyboard. I'm sure I use Mission Control more than most, so it's really irritating for me.

    No, the versions of iPhoto on the iPad and on OS X are totally different.
    What Apple ID are you using for the Mac App Store? Who else has access to that Apple ID, or what possible other Apple IDs could be in use? It's possible you'll need to purchase iPhoto to get the upgrade, though I'd think Software Update should offer you the correct version.

  • Apache won't work after 10.5.2 update

    Apache won't work, after I installed the 10.5.2 update.
    When I type the following in the terminal: sudo apachectl -t
    I get a error:
    /usr/sbin/apachectl: line 81: 711 Segmentation fault $HTTPD $ARGV
    Does anyone know how I can solve this?
    thank you!

    I too had the same problem after the auto update 10.5.2 - specifically the 2008-002 update broke my machine in a number of areas.
    I downloaded the package and ran it, this seems to have mopped up the problems caused my the first run.
    The update is located at:
    http://www.apple.com/downloads/macosx/apple/security_updates/
    Look for 2008-002 (Leopard) it's about 50MB.
    Hope this works for you too.

  • ICloud email won't work after upgrade

    iCloud email won't work after upgrade to Mountain Lion.  Says pop 3 server is timing out. Solutions?

    I'm sorry, as I keep saying... in MAIL I get the message that it cannot cannot to server!? Did you read the initial problem at all! I know exactly where mail is, although, the diagram was wonderful.
    My problem is TWO FOLD.
    The MAIL app doesn't work with iCloud but does work with my POP3 email for my office.
    Second problem is the iCloud on Safari doesn't work as I get the error message as the screenshot above.
    There is NO reason why the @me.com email shouldn't work through the iCloud site, as you can see, there is a also a Mail icon.

  • HT204350 scanner won't work after upgrade

    scanner won't work after upgrade

    Hey srohall,
    Thanks for the question. I understand that you are experiencing issues with your scanner after updating to OS X Mavericks. To troubleshoot this issue, we’ll want to follow the same troubleshooting steps for printers:
    Troubleshooting printer issues in OS X
    http://support.apple.com/kb/ts3147
    Follow these steps until the issue is addressed:
    1. Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
    2. Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
    3. Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
    4. Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
    5. Delete the affected printer, then add the printer again.
    If the issue persists, try these additional steps:
    1. Reset the printing system, then add the printer again.
    2. If the issue still persists, reset the printing system again.  Download and install your printer's drivers. Then, add the printer again.
    3. Contact the printer vendor or visit their website for further assistance.
    Thanks,
    Matt M.

  • My iphone won't work after fatal error occurred installing iOS5.1 have followed allsteps to reconfigure software onto windows still no phone just a usb and itunes picture on screen

    my iphone won't work after fatal error occurred installing iOS5.1 have followed allsteps to reconfigure software onto windows still no phone just a usb and itunes picture on screen

    Connect the phone directly to the computer, not a hub.
    Disconnect all other USB devices except keyboard and mouse.
    Disable your firewall
    Disable your antivirus
    In iTunes if it recognizes the phone click "Restore"
    If it doesn't recognize the phone:
    Disconnect the phone from the phone end, leave the USB cable plugged into the computer
    Hold the HOME and SLEEP buttons until the screen turns black, excactly 10 seconds, then release the SLEEP but continue holding the HOME (If an Apple logo appears you have held SLEEP too long; do it over)
    While holding HOME connect the cable to the phone
    As soon as iTunes recognizes the phone release the HOME button and it should restore.
    If neither procedure works note the exact error message and post it.

  • Firmware update won't work after you've tried the Narf/Blanka method?

    Many ppl have reported that their Firmware update won't work after they've tried the Narf/Blanka method for Dualbooting Windows. [For some reason, it doesn't).
    Formatting the startup, reinstall etc WILL work ... because of what our friend says here : http://discussions.apple.com/message.jspa?messageID=2076211#2076211
    Fortunately, it isn't necessary To Reformat etc... (at least for the firmware update) Apparently, as long you boot from a different Disk to the one you've 'messed with' - such as , say, an external FW Drive, the Firmware updater works.
    Had the same problems, same reasons on a 20". Booting from external FW Drive made it happen for me.
    May someone be helped by this e-missive....

    Sorry: the above is (partly) wrong ... - it'll get you past the firmware update but won't get you past the Boot Camp Assistant ... - it wants to see a single partition No matter what ...
    [Just for that, I'm gonna see if I can mess with the 'can't do this on an external drive' requirement ... by moving an external to internal then back out again grin)
    best of luck...

  • My airport won't work after sleep

    I have a powerbook G4. I have used it flawlessly for years between two locations, closing it up to sleep and opening up at the new location. It would find the airport base stations and connect perfectly. Now when I open it up, airport does not automatically connect and in fact does not show any of my neighbors' wifi hot spots. I use the airport utility and it finds nothing. Turning my airport on and off won't work either. In order for airport to work, I must reboot each time.
    Any suggestions?
    Powerbook g4 1GHz   Mac OS X (10.4.8)  

    If after installing Security Update 2007-004 on OS10.3.9 and after waking from Sleep you experience a kernel panic notification (black pane) to reboot with the power button ......... do the following:
    Reboot .... then apply /App/Utilities/Disk Utility/Repair Permissions .... shut down .... Reboot while holding down Command-Option-P-R keys together until the computer chimes three(3) individual times ... release keys to complete reboot .... Repair Permissions again ... click the soft Restart .... Sleep the computer then wake it up .... the kernel panic pane should be gone.
    P.S. If after the above you still have Airport issues (you probably have the Airport "b" card), go to /System/Library/Extensions and delete to Trash all BUT the latest Airport Extension (check by DATE, not the version number). To permanently remove the AP2.kext, you must use Admin. password.
    DIXIE
    15"iMacG4/800/60GHD/768MB-12"PB/867/60GHD/1.12GB-G3/400/1GB   Mac OS X (10.3.9)   AE network

Maybe you are looking for

  • Sales orders asignment to Production order

    Hi,     I need the following requirement,     I have 4 sales orders which has different delivery date. I want to have a single production order for these 4 sales orders (I am using strategy 40 and collective requirement option in MRP 4 view), My requ

  • Playing sounds one at a time

    I'm making ebooks, designing in InDesign, exporting as PDF, opening the PDF in Acrobat and embedding sounds. In the resulting files if I click on one sound, say a three minute mp2 song, and then click on the next sound, the first one is still playing

  • How to Install oracle 8i on Windows Vista Ultimate

    Hii, I want to install oracle 8i in my laptop. I am using Vista Ultimate OS. I am getting a java runtime error. why is it happening ?

  • Cannot get Photoshop Elements 10 Trial to Install - Windows 7 64-bit

    Hi, I cannot get Photoshop Elements 10 Trial to Install - Windows 7 64-bit.  I downloaded the trail of Photoshop CS6 just fine.  I am trying to download the trial of Photoshop Elements 10.  I get the adobe installer window and I login in and select m

  • AR Aging Report does not change with Posting, Due, and Document selections

    It appears to me that when you run the AR Aging report with the same date ranges in each of the date selection fields, Posting, Due and Doument, you do not get a different display of aging buckets.  Does this report always display data based on Due D