Entries are missing in table HRPY_RGDIR when off-cycle payroll is run.

Hi Experts
             when the offcycle payroll is run with the reason 'Regular on demand', it is not generating entries in table HRPA_RGDIR.As a result of this,the sequence number in RGDIR does not match the sequence number on payroll results.This problem happens only to few employees and the reason is uncertain.
SAP note 1449381 has also been applied to the system, still this problem exists.
Thanks,
Ram.

Thanks Ted.The note has been applied to the system long back and the issue still persists.We are already using the program RPUDIR00 to restore the payroll results directory.This is a workaround and i thought of having a permanent solution for this issue.
Thanks,
Ram.

Similar Messages

  • Debit entries are missing in table J_1ITRNACC

    Dear CIN experts,
    I have very strange problem in case of Capital purchase.
    My excise posting for capital goods is BED       100 Rs.
                                                                  Ecess       2 Rs.
                                                              H.Ecess        1 Rs.
    But at the time of excise posting in J1iex Accounting simulation is            BED   101.5   Cr
                                                                                    On Hold BED     50.0   Db
                                                                                    BED     51.5   Db 
    System is not considering 103 Rs amt for BED.
    After clicking on post system gives above error Debit entries are missing in table J_1ITRNACC.
    Please suggest for this problem.
    Regards,
    Gitesh

    Hi,
    SPRO-Tax on goods movement-India-Specify excise accounts per transactions.
    Check for GRPO & CAPE, whether Dr & Cr accounts are maintained properly or not.
    I think, entry is missing here.
    Regards,
    Piyush

  • OFF-Cycle payroll error Resigned employee

    Hi Experts,
    I have a very typical problem here faced by the employee ;-
    The scenario is this
    Employee resigned during the last year , his payroll area changed to inactive
    The last results available in the cluster for the employee belongs to period somewhere in june 2008 month of resignation
    In the current financial year , company  wants to pay bonus to the employee.
    So the employee was again put in to active payroll area with effective date 01..09.2009  for processing the payroll usiing 0267
    In Infotype 0003 , the run up to date has been updated has 30.09.2009
    in pa03 , the payroll control record has the status has the exit in the Aug-2009 , not yet released in Sep-09
    so ideally , when wwe are processing the off-cycle after the above mentioned steps, it should process the payroll in off-cycle.
    In the simulation it is processing, but coming with a message that                                                                               
    " Payment date of payroll 04.09.2009 later than period end of next payroll  31.08.2009"
    But when we try to finalise the cases it is throwing up the error mentioning the same.
    We are not able to finalise the Off-Cycle payroll for such cases.
    Anyone please can help me in this ?
    Thanks & Regards
    Srijit R Menon

    Hi Sadhu / Sikandar,
    Thanks  for the reply,
    I checked with CYFRM , it is given as 1 only,
    again , for the terminated employees the final run was made in the month they were terminated., in june-08
    And while doing offcycle run does the payroll driver checks the past period resuts, i m not sure
    even if it checks , the offcycle is allowing me in quality system with the same data ,  data in quality & Production is equal, as we have updated our quality system recently by copying the production.
    In Quality its working , and not giving any errors and issues, the pa03 is also in the exit mode of aug-09 , the payment date is given as 04.09.2009 in 0267 . its allowiing me to simullate and final it
    Kindly help

  • Italic fonts are missing in Table in PDF files when we print it out

    We use Adobe reader10 to open one PDF files, fonts in Table are display correctly on screen, but italic fonts are missing in Table in PDF files when we print it out. Any ideas?
    The PDF display correctly when we use Adobe Reader 9 to open it or print it out.

    George_Guo wrote:
    Why it is OK for Adobe reader9, and not OK for Adobe reader10?
    You could try posting your question on this dedicated Acrobat Print forum: http://acrobatusers.com/forum/printing-prepress

  • "The entry    is missing in table T030"

    Hi,
    I'm trying to close a period but, after all the selections made, when I execute I get this message: "The entry is missing in table T030". I mention that I'm trying to do this in localization for Romania. Maybe somebody could tell me what this message means and what should I do?!
    Thanks, Andreea

    Hi Andrea
    It looks like there is some account determination that is missing. Please recheck using TCode OBYC(relating to MM). Also please provide detailed information as to what transaction was exceuted when you got the error message.
    However do check your automatic posting procedures in OBYC.
    Regards,
    Karthik
    Message was edited by:
            Karthik Coneru

  • Copying is not poss.because an entry is missing in Table TVCPL: L2, VTLA

    HEllo all,
    we just created a new condition type.
    (Re: sales order - new condition type - account assignment)
    Now when I create a new sales order and use this condition type, it is working fine. When I want to deliver the order, it gives me this error message:
    Copying is not poss.because an entry is missing in Table TVCPL: L2
    So now according to other threads in this forum, I went to copy control settings in VTLA. Now I wanted to create entry for Target delivery type L2, but the problem is, there is no target delivery type L2??? It is not in the list.
    What can I do??
    Thanks
    Anne

    Hi Raja,
    that's what I tried to do:
    I created a new entry, entered L2 for target delivery type and OR for source sls doc type.
    When saving I am getting:
    Entry L2   does not exist in TVLK - check your entry
    Thanks
    Anne

  • Copying is not poss.because an entry is missing in Table TVCPL: AF

    Good night,
    When Create outbound delivery with order reference, got an error :
    Copying is not poss.because an entry is missing in Table TVCPL: AF
    Message no. VL473
    go to t-code :VTLA
    want to create target delivery for AF but no selection for AF.
    Order transaction using TAV.
    Guru, guide me please.
    Thank you,

    Hi
    You have to create teh copy control from order to delivery process in VTLA
    You can copy the s tandard one OR to LF and then create copy control for   your new document  types.
    You have to configure at the header and item levels in this tcode. For detailed information, you can put F1 in each field and find out the purpose of each field.
    Reward if this helps.

  • Copying is not poss.because an entry is missing in Table TVCPL: ZO26

    Hi..
    In VL01N - outbound delivery , the following error occurs
    "Copying is not poss.because an entry is missing in Table TVCPL: ZO26 "
    here ZO26 - Sale doc. type
    Plz give me the solution , as soon as possible.
    Regards
    Deepa.

    Dear Friend,
    Please check you document flow settings ..
    What is understood from the error is that your item categories which are determined in the sales order are not relavent for delivery.
    While coping your item categories did you check for coping all the relavent item catwgories detminations.
    Next chech which item categories is determined and copy control settings.
    The problem here is the order documents items are not able to copy into delivery  because of your document flow setting.
    Check the same .You will be able to get the error.
    reward points if helpful,
    regards,
    Amlan Sarkar

  • Copying is not poss.because an entry is missing in Table TVCPL: Z03 Z15 Z25

    At the VL01N transaction itgives out a message of :"Copying is not poss.because an entry is missing in Table TVCPL: Z03 Z15 Z250" . I can't make the delivery even nor pass the initial screen of VL01N. Can anybody help me with brief explanations?
    Thanks in advance.

    Hi Hikmet Akcali,
    Copy Control for Delivery is not maintained in the system for Delivery type Z03 Sales Doc type Z15 and Item category Z250. Thats why you are getting this error.
    Please maintain the copy control settings in VTLA ( copy control sales doc to delivery doc)
    For this go to VTLA ( tcode) and create entry for Target delivery type Z03 and source doc type Z15 , by copying from an existing combination which is most similar to this Dely doc / sales doc combination.
    If this entry already exist then , create the entry for the Item category Z250 in the item level at VTLA. Maintain the settings like copying requirement and other field suitably.
    Save the settings and then create fresh delivery against the order.The error will not pop up.
    Thanks!

  • Copying is not poss.because an entry is missing in Table TVCPL: ZOV2 ZDV2

    Hi,
    I created  sales order and delivery for consignment purpose and for return it I create return sales order again, but at the time delivery creation the system shows me the error:
    "Copying is not poss.because an entry is missing in Table TVCPL: ZOV2 ZDV2"  Message no. VL473
    I checked VTLA and copy sales order type to delivery type with following data:
    Order requirements: 001
    Combination requirement : 051
    Header data: 001
    and copy item category REN as follow:
    order requirements: 101
    Item data: 101
    business data : 2
    but problem still remained. So I want to know how I can fix this error message?

    Dear,
    Table TVCPL is the table which is used for copy control so the error says maintain it properly and as per message
    there is error of Copy control Between Document ZOV2 to ZDV2 so I would suggest following step,
    1)Check the Item Cat.(REN) is define for delivery (ZDV2) check it out if Item Cat. (REN) determination is done in Delivery
       That is the only thing which will be missing, if stil problem exist then
    2) Do set Copy Control altogether again just copy it between RE TO LR and rename as ZOV2 and ZDV2 and retry ur process.
    AND IF U ARE DOING CONSIGNMENT PROCESS THEN LET ME KNOW AS IT REQUIRE DIFFERENT SETTING.
    Regards
    AJIT K SINGH
    HAPPY TO HELP U

  • Registry entries are missing, re-install Itunes

    When I start Itunes, I get a message stating that the registry entries are missing and to reinstall Itunes. My Itunes player still works...if I reinstall Itunes, what happens to purchased music? will they recover automatically or do I have to manually find .m4p files?
    thanks

    When I start Itunes, I get a message stating that the registry entries are missing and to reinstall Itunes.
    Hi Scott!
    could you let us know precisely what that error message was saying? sometimes it's easiest to send us a screenshot of the error message box. there's instructions on how to do that given here:
    Hudgie, "Taking screenshots to help with problems.", 12:04pm Apr 19, 2005 CDT
    love, b

  • Entry VEHICLE missing in table COM_SE_BUSOBJ

    Hi Experts,
    I’m facing an issue in SAP VMS (Vehicle Management System). If I click on the “Find” option in VELO transaction then list of vehicles will be displayed but system throwing following error” Entry VEHICLE missing in table COM_SE_BUSOBJ”
    Plz help me to solve.
    Thanks in advance!
    Regards,
    Naga

    Hi Naga,
    You have to maintain business object VEHICLE in customizing table COM_SE_BUSOBJ:
    SPRO -> SAP Netweaver -> Application Server -> System administration -> Search engine service -> Define business objects for search engine service
    Maintain record:
    Business object: VEHICLE
    Object type: 1
    You have to enter the Index-ID for SES, see F1-help.
    Regards
    Joachim

  • Copying is not poss.because an entry is missing in Table TVCPL: ZOR3

    Copying is not poss.because an entry is missing in Table TVCPL: ZOR3
    Message no. VL473
    Murli

    hi
    maintain copy control for sales documents to delivery documents in VTLA
    zor3 to lf as target
    regards]

  • Database entries are missing

    I have multisim V9. several of the database entries are missing. Some were there before and are not there now. Could the database be corrupted? How can I restore the database? I tried to re install, several entries returned , but not all. Whole "families" are missing.

    Hi,
    If you have a database where some families are missing while others are available, this indicates a corrupt database.  You should reinstall but make sure you delete the Multisim install folder, the Add and Remove program utility does not remove your old corrupt database.
    Tien P.
    National Instruments

  • Issue when running acutal Off-cycle payroll in India!

    Dear experts!
    I have an urgent issue when running ACTUAL off-cycle payroll in India as below: "Payroll already performed once in future".
    In testing mode, everything is fine. I have tried to check payroll result in pc_payresult and pu01, and Infotype 3. All of them show the last payroll in 31.07.2011. But now I run off-cycle payroll on 20.08.2011, this error is displayed. So I cannot run actual payroll for them.
    Please help me! I am really appreciated.
    Regards!
    Woody.

    Hello
    Normally this error message reflects an inconsistency in the payroll
    directory cluster, that you can view via RPUDIR00. What you can do to
    restore the consistency is to run the report RPUDIR00 for this pernr
    with the following parameters on the selection screen:
    Payroll for country                           
    Personnel number             
    Compare directory            
    Payroll results structure   
    detailed log                
    Save new directory             X          <  this will write the new directory.  If you want to test first, do not select this parameter.
    Afterwards it should be possible to run payroll for this employee.
    Thanks and Kind Regards
    Ramana

Maybe you are looking for