Entries in  BSID for customerA is more than for Customer B.

Hi SDNers,
In case of CustomerA, no of entries fetched from BSID is 246709 .
Because of this a standard piece of  code takes a looong time to execute.
In case of Customer B, no of entries fetched from BSID is just 512.
Because of this less entries standard code executes faster.
Please suggest if some things can be deleted or cleaned up for this customer A from the table BSID.
What should be the steps taken to reduce the time of execution.
since this is a standard code, i cannot  make changes too.
Please suggest.
How can we clear up so many entries from BSID?
Can archiving be done?
or deletion?
what steps needs to be done to reduce the entries for CustomerA in table BSID.
Please suggest.
Regards,
SuryaD.
Edited by: SuryaD on Dec 8, 2009 7:27 PM

This would be a basis related job of deleting.
No, it's not, unless you have performed clearing as Rob suggested.  You will need your FI configurator (or someone who knows how to perform the IMG step) to specify the clearing criteria by customer account number range.  Be sure that the criteria are accurate for your business needs so the documents clear properly.  Then you will run one of the SAPF124* programs to clear the documents on a regular basis.
You can't archive open items.  Once the items are cleared and moved to BSAD though, you can archive them IF they meet the criteria (as specified in SARA).  There is a post-processing step to remove the secondary index table entries.  You may or may not elect to run this as well.  Without a good archive imaging system, we elect to NOT run the secondary index clean up - this allows the main entries to be deleted but auditors, accountants, and reports can still generate some details and have some visibility in the FBL*N transactions.

Similar Messages

  • SU01 user as reseller for more than one customer?

    Hi,
        We have a requirement where internet user act as a reseller and can place order for more than one customer in ISA R/3 edition. In the XCM configuration i have selected the user as R3_SU01UserStandalone and then followed the activity given in the SAP Document:
    http://help.sap.com/saphelp_crm40/helpdata/en/03/f6ce51eb8e4dbe82b9ca75e5c74fe6/frameset.htm
    Can anyone provide a solution what other steps i need to follow for this issue.
    Thanks
    Ankit

    Dear Shankar
    You have not specified whether the scenario is MTO or MTS.  If it is MTO, stock will be allocated against sale order as and when MFBF is done.  If it is MTS, then go to OMJJ, select Movement Type and give 292 and execute.  Now select "Field selection (Enjoy)" tab on your left and there maintain the option as Required Entry for the field "KDAUF" and save.
    Now go to MB1A, give movement type 292 with special stock W, plant and storage location and execute so that the system will ask for sold to party code.  Give the sold to party code and enter material code, stock to be reserved and save.
    If you see in MMBE now, those stocks will be displayed as special stock.
    thanks
    G. Lakshmipathi

  • How to use the same credit card for more than one customer master

    Hi,
    this is a question for consultants at least a little familiar with SAP business partner, Customer-vendor-intergration cvi, contract accounting:
    My customer wants to store the same credit card with more than one customer. Arguments are that family members or partners may mutually agree to use the same credit card for their distinct purchases.
    I never tried with amazon or the likes but I know that SAP validates the uniqueness of credit cards.
    I found 6 code line where the message (V/)005 "Payment card &1 &2 is already assigned to customer &3" prohibits duplicate assignment.
    Even if I create a couple of enhancements to suppress the error, I don't know how the system will work.
    The customer does not like the idea of using alternative payer.
    Did you ever face the same problem and how did you solve it?
    Much Thanks in advance
    Best regards
    Clemens

    thanks

  • How can I search for files with more than one keyword?

    I´ve created some keywords, and some files in my folder are tagged with two, three or more keywords.
    Is there a way to search for files using more than one keyword on the search field?
    Thanks!

    Use the Find command (menu Edit) and in criteria at the right side is a plus sign to add another criteria and set it to your custom wishes.
    make a choice in results and you should be OK

  • Can i assign one customer to more than one company code how?

    can i assign one customer to more than one company code how?

    Hi
    First Create the Customer Centrally in XD01 and then extend the same Customer in FD01 for the required company codes.
    Regards
    Venkat

  • Do you have customer with more than 100 users ?

    Hello
    We think to place business One to a One hundred users customer.
    Do you know if it will works fine ? Do you have an existing customer with more than 100 users ?
    Thanks for answers.
    Julien

    Julien,
    The number is users is just one component in detemining if SAP B1 would work well.  If the transaction volume is low-medium then it should not be a problem.
    I have implemented a couple of 100+ user installations and they are still using B1 after 3 years.
    Minimizing the number of Alerts also helps in better system performance in case of such large installations.
    Regards
    Suda

  • Assign the same credit card to more than one customer master

    Hi,
    this is a question for consultants at least a little familiar with SAP business partner, Customer-vendor-intergration cvi, contract accounting:
    My customer wants to store the same credit card with more than one customer. Arguments are that family members or partners may mutually agree to use the same credit card for their distinct purchases.
    I never tried with amazon or the likes but I know that SAP validates the uniqueness of credit cards.
    I found 6 code line where the message (V/)005 "Payment card &1 &2 is already assigned to customer &3" prohibits duplicate assignment.
    Even if I create a couple of enhancements to suppress the error, I don't know how the system will work.
    The customer does not like the idea of using alternative payer.
    Did you ever face the same problem and how did you solve it?
    Much Thanks in advance
    Best regards
    Clemens

    Thank you Rafael,
    as I said "The customer does not like the idea of using alternative payer."
    I know this would be the correct way but the customer rules - so I try to evaluate a solution.
    Regards
    Clemens

  • How do I print more than one custom-size photo on a page in PSE 10?

    I recently upgraded from Photoshop Elements 6 to Photoshop Elements 10.  I make greeting cards, and on PSE 6 I was able to print two custom-size (6-1/2” x 5”) cards on each 8-1/2” x 11” sheet of photo paper.  The option to print more than one custom-size card on a single sheet of paper is not available in PSE 10.  I want to know how I can print more than one custom-size card (or photo) on a page in PSE 10?

    In Editor:
    File>Print>#4 Select type of print>picture package

  • Can I run my creative cloud for teams on more than one computer?

    Can I run my creative cloud for teams on more than one computer?

    Hi Nick,
    We would like to inform you that you can install and activate the subscription on 2 machines, however, you cannot use both of them at the same time.
    Kindly check the point 1.1 from the below mentioned link.
    http://wwwimages.adobe.com/content/dam/Adobe/en/legal/servicetou/Software_Terms-en_US-2015 0407_2200.pdf
    Thanks,
    Atul Saini

  • Create pagination for table contain more than 2 PK

    Guys;
    Is there any way to use the wizard for creating FORM PAGINATION for tables having more than 2 PK??
    Regards;

    Hi dimitri;
    after the user login & start using this form thiswhat should happen to these 3 PKs:
    -1st PK will be a unique number for the questions.
    -2nd PK should be the ID for each survey ( created as global variable in Zero Page ).
    -3rd PK will be the division for this user (also created as a global variable in ZERO PAGE)..so this is the only field which will nt be changed while the user is logged..
    i tried to use the 1st 2 PKs...& set the last one to get a default value..it worked in the begining but gave me the 1st record for each Survey but my problem that i couldnt navigate to the 2nd record..& after that once i log out & relogin it willnt give me anything.
    Regards;
    ehammad

  • Lync BToE - USB HeartBeat is not passed from Lync for long duration (more than 20 seconds)

    Lync BToE - USB HeartBeat is not passed from Lync for long duration (more than 20 seconds)

    Hi,
    Did the issue happen only for you or for multiple users?
    Make sure phone update to the latest firmware.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • IPhone calendar faile to search for future events more than 1 year

    Dear guys,
    I can't search for future events more than 1 year later.
    Is it a common scenario?
    Many thanks!

    Dear guys,
    I can't search for future events more than 1 year later.
    Is it a common scenario?
    Many thanks!

  • Can the iPhone 4 with iOS5, have more than one custom voicemail greeting?

    Is it possible to put more than one custom greeting on the iPhone 4 with iOS 5?  I sometimes would like certain people to know where I am or what I'm doing so they may take the opportunity to join me without me answering the phone each time it rings when I'm hosting a seminar or teaching a class. I would like to record a couple of responses that I could pick from, but don't know if that is possible.  Thanks!

    iPhone and carriers do not natively support this. You have to use a third party application from the App Store to take advantage of this feature, which is possible via an application such as YouMail. It's free in the app store. I'm sure there are others like that available as well.

  • ORA-00494: enqueue [CF] held for too long (more than 900 seconds)

    Hi ,
    I am getting this error , the database is in no archive mode and there is frequent log switch.
    However following few metalink notes I have set the hidden parameters like
    killcontrolfile_enqueue_blocker=false
    killenqueue_blocker=1
    I wanted to reduce the frequece log switch how to reduce it.
    ORA-00494: enqueue [CF] held for too long (more than 900 seconds) by 'inst 1

    One way is to make the size of the redo logs bigger and another way is to do some less work :)
    Changing Redo Log File SizesEach Redo Log File member in a Group must be identical in size. If you need to make your Redo Log Files larger, use the following steps.
    1. Use the V$LOG view to identify the current active Redo Log Group.
    SQL> SELECT group#, status FROM v$log;
    GROUP# STATUS
    1 INACTIVE
    2 INACTIVE
    3 CURRENT
    4 INACTIVE
    2. Drop one or more of the inactive Redo Log Groups keeping at least two current On-line Redo Log Groups.
    3. Use operating system commands to delete the files that stored the dropped Redo Log Files.
    4. Recreate the groups with larger file sizes. Continue this sequence until all groups have been resized.
    Edited by: TSharma on Jan 17, 2013 11:52 AM

  • Vector or ArrayList  use for dropdown with more than 1000 entries

    Hi Friends
    I am having more than 1000 entries of different TimeZone's which i need to display in a dropdown list.
    i am not able to decide whether i need to use a Vector or Arraylist for storing these values.
    please let me know which one will be best suited to use in case the list entry is more than 1000 characters.
    waiting for a positive reply from your side.
    Thanks & Regards
    Vikeng

    A JComboBox can be constructed from a Vector (rather than any other sort of List) without having to implement your own ComboBoxModel. (JList is similar).
    I agree with kajbj - a control like this with a thousand entries is rather poor interface design. One exception might be if the entries are sorted in some way, and you "jump" to the appropriate place in the list as the user types.

Maybe you are looking for