Entries in Infotype PA0041
Hi,
When an employee is Reinstated from Suspension will Last Hire Date will be changed in Infotype 41, if not under what circumstance will this field be different from original hire date.
How to check whether an infotype will be affected by a dynamic action?
thanks,
sriram
First
1. you have to test what is happening in your system
2. Go to SM30 T588Z and check PA0000 whether any Dy actions has been configured or not
Similar Messages
-
Any tool to upload data to Fast entry (pa42) infotype
Hi all,
is there any tool like LSMW to upload data for Fast entry actions infotype?
Regards,Hi dear Kavitha,
U can use S-CAT and BDC for that.
BDC u can record at transaction code SHDB.
Make a template for the same and uplaod.
(ABAPer Help is required fopr BDC though its a small task if u understand the same) -
Runtime error while updating entries of infotype usin HR_INFOTYPE_OPERATION
Hi,
I uploading entries of customized infotype using HR_INFOTYPE_OPERATION function module.
It is giving me run-time error as,
ShrtText
An exception that could not be caught occurred.
What happened?
The exception 'CX_HRPA_VIOLATED_PRECONDITION' was raised but was not caught at
any stage in the
call hierarchy.
Since exceptions represent error situations, and since the system could
not react adequately to this error, the current program,
'CL_HRPA_INFOTYPE_FACTORY======CP', had to
be terminated.Hi,
Refer to this link..Re: CX_HRPA_VIOLATED_PRECONDITION using HR_INFOTYPE_OPERATION to insert rec -
Duplicate entries in Infotype 0000 :- Delete problem
Hi,
There is a scenario where duplicate entries have been entered by mistake in infotype 0000 for a same action XE with same dates.
If I am trying to delete one of them it's giving me an error "Action XE that changed the status was found . Data
Inconsistency".
Please let me know how can I delete one of them manually.
I can do it through a program by direct table delete but don't want to do that.
Thanks
Umangdon't know if this would work.. but you can give it a try.. ensure nobodyelse is in PA30.. change the time constraint for 0000.. delete the unwanted record & change the Time Constraint back..
Regards,
Suresh Datti -
Hi All,
I want to configure fast entry (PA71) for infotype 0007.
I have created an entry in T588R. But for T588Q, I couln't find any fast entry standard screen for this infotype.
Please help!!!
Thanks,
BhaskarHello friend,
I think this link will be helpful for you,
Re: PA71 - Fast Entry for Time Date, how to add 0007 for Fast Entry
If your problem still persists revert back to me i will help you.
Thanks,
Sri Hari. -
Jobs are not in F4 entry in infotype 0001
Hi all,
When i am doing F4 in 0001 infotype, all jobs list in infotype 0001 are not comming but all jobs are in table T513
how can these jobs will come through F4
regards
rjHI
SM30, T77S0.
PLOGI PRELU BTCI Integration: PA update online or batch -
Error while creating entry in infotype in PA30
I am not getting initial screen after entering person number and infotype and clicking create button.
I am getting screen with proper header as I want and "Initialisierungsdynpro" on the screen instead of
infotype........
Please give solutionHi Ray, I had the same problem but I can't resolve it. Can you explain me in more detail how to set to initial screen 2000 and 3000?
I had this problem when I create e new subscreen. Help me please, thanks. -
How to create Infotype entry in table T777D
Hi All,
We have undergone Upgrade from 4.6C to ECC 6.0.
Now we get an error while maintaining certain data infotype 0122 does not exists.
I looked at the entries in table T777D in both the system. In older system the entry is there but not in the new system.
When i tried creating the entry in this table the error comes 'Module pool program MP012200 is not present'. This program was there in 4.6C but is not there in ECC 6.0.
How do we genrate this program or how do we create the entry for this infotype to correct the error.
Is there any customizing settings that is required?
Please advice.
Regards,
Vidya.Look at OSS [Note 546167 - Termination in PA10: Infotype 0122 does not exist|https://service.sap.com/sap/support/notes/546167]
>Symptom
>
>When you edit the master data (transaction PA10) after you upgrade Release 4.6C to Release 4.70 or higher, a termination occurs and an error message is issued informing you that infotype 0122 does not exist.
>
>Other terms
>
>No entry in table T777D
>
>Solution
>
>In the 'Infotype attributes (Customizing)' view (extended table maintenance for view V_T582A), delete the entry for infotype 0122.
>In the 'Infotypes - country-specific settings' view (extended table maintenance for view V_T582L), delete the entry for infotype 0122.
Regards -
Fast Entry Screen for infotype
Dear Freinds,
I want to have Fast entry for infotype 0008 . Could any one let me know whether Fast entry is possible for 0008. I can see there is fast entry for 0014 and 0015. If possible for infotype 008
can you please let me know how to do . I have tried in the SM 30 using the table T588Q but what
what is the Selection Report i have to use.
Thanks & regards
madhuriHi MAdhuri,
You can change the entry screen for fast entry,
in Img
Personnel Management-. Personnel Administration-> Customizing User INterfaces-> Fast entry Actions-> Change screen for Fast entry
Warm REgards,
KPAil Kaushal -
Hi Experts,
we are using portal 7.3 version,Our requirement is addition
of a new field “Leave Details” in the LTA screen with dropdown values from Infotype
2001 subtype ITEL. From the current calendar year in ESS.The new field should
be available only for the claim type LTA claim or claim against advance.
please find the below screen shot and details.
Current View
Component: HRESS_CLMS_WD_EMCR
Personalization: 4370750342A6297CC184E2B07FE6D13E
Window: W_CLM_DYN_UI
View: V_CLMS_DETAIL
Application Component: PY-XX-RS
Kindly help me how to add this field and in which method can i implement code.
Thank you in advance
Regards,
VanithaHi Shankar Reddy,
Business requirement is the new field should display the list entry in Infotype 2001 for the calendar year as selection option for employee. they would like to know ITEL subtype claim,
Example.employee no: EE#9941
As per screen shot you may see for EE#9941 there are 2 Leave requests.
So in the leave details the selection drop down menu option or any other way should be display 2 lines.
Regards,
Vanitha -
ALE: Missing infotype 0002 in Idoc Creation
Dear experts,
I need your help regarding ALE configuration. Currently IT02 is included in the customer distribution model for HRMD_A message type but everytime we create a change in an employee that triggers the change pointer it doesn't capture the changes for IT02. I can only see IT0, IT1, and IT3 but IT02 is also in the filter? do you have any ideas how can I troubleshoot this scenario? thanks in advance!
Regards,
MikeDear Krishna,
Hope you are doing good.
I know its very late in getting into this conversation. Since I am also experiencing the same issue, i need some inputs from you.
The error you posted on the top is same what i am getting when I am doing data transfers from SAP HR to E-Rec systems. Our iDoc is working file in Development server but not in Quality server. I am experiencing the same errors what you have mentioned above.
When i checked the error, this error has occurred in subroutine read_namtb for structure of infotype.
Proceedure is to Check the entry for infotype in table T777D (structure, IDoc segment,
expanded structure) and the corresponding structures.
As you have resolved this issue before, can you please suggest what needs to be maintained in the tables such as T777D, T777E, and T777Z.
Appreciate your valuable inputs on this.
Thank you. -
Automatic updation of amount of wage type in infotype 0008 for all live emp
Hi,
Please note that I want to upadate one wage type (9001 - bonus) amount from Rs.2000 to Rs.1950 in infotype 0008 for all the live employees.
If I do the following way -
Payroll: India -- > Reimbursements, Allowances and Perks --> Maintain Pay Scale Groups and Levels
then the new value appears only for new entry in Infotype 0008.
Please advice
Warm Regards
S J Rajamyou can try through fast entry screen and update the amount in infotype.
-
Hi,
While saving infotype 8 , a user exit gets called which calls infotype 7 for new entry. Infotype 7 is modified with with subscreens from Infotype 107.
While calling infotype 7 via infotype 8 , the fields on the subscreen of infotype 7 are not enabled , how these can be enabled for entry.
Although i can assign value to subscreen field , i can not make it editable . Any idea how the subscreen field can be enabled ? (in loop at screen . i don't get the subscreen name)
Also when i run infotype 7 independently , the all subscreen fields are enabled.
Do reply.
Thanks.Hi,
To make the field editable you need to change the Configuration using SPRO. The infotype 0107 is secondary infotype. If you need to update the Infotype 0107, you need pass along with Primary infotypes for ex Infotype 7 etc.
Hope this will be helpful.
Raja T -
Balance gets reverted in Infotype 2006 (Absence Quota)
Scenario:
staff has a balance of 36 availale with him and has entry in Infotype 2001 (for dates 13/12/2010 - 17/12/2010 - ).i..e, 5 week days
Now if the staff takes another leave on next working day i.e., 20/12/2010, system needs to deduct the weekend in between, ie. 18/19/2010
For this purpose i have written a code, where follwoing peace of cdoe is creaeting an abrupt situation.
i'm using the follwoing code.
[code]
REFRESH ABSENCE1.
in itab_pa2001 i get the original records from the system so need to get existing recrod from system
and limit the itab_pa2001 to only the week end record
THIS IS WORKING
LOOP AT ITAB_PA2001.
CALL FUNCTION 'BAPI_ABSENCE_GETDETAILEDLIST'
EXPORTING
EMPLOYEENUMBER = ITAB_PA2001-PERNR
TIMEINTERVALLOW = ITAB_PA2001-BEGDA
TIMEINTERVALHIGH = ITAB_PA2001-ENDDA
IMPORTING
RETURN = RETURN
TABLES
ABSENCE = ABSENCE1.
IF RETURN-TYPE NE 'E' OR RETURN-TYPE NE 'A'
OR RETURN-TYPE NE 'W'.
LOOP AT ABSENCE1.
ENDLOOP.
DELETE ITAB_PA2001 WHERE
BEGDA = ABSENCE1-VALIDBEGIN
AND ENDDA = ABSENCE1-VALIDEND.
ENDIF.
REFRESH ABSENCE1.
ENDLOOP.
REFRESH ABSENCE1.
CLEAR ABSENCE1.
now itab_pa2001 only having the week end record follwoign code creates it
LOOP AT ITAB_PA2001.
STATUS = 'TRUE'.
CALL FUNCTION 'BAPI_ABSENCE_CREATE'
EXPORTING
EMPLOYEENUMBER = ITAB_PA2001-PERNR
VALIDITYBEGIN = ITAB_PA2001-BEGDA
VALIDITYEND = ITAB_PA2001-ENDDA
ABSENCETYPE = ITAB_PA2001-SUBTY
IMPORTING
RETURN = RETURN.
IF RETURN-TYPE EQ 'E' OR RETURN-TYPE EQ 'A' OR RETURN-TYPE EQ 'W'.
WRITE : RETURN-MESSAGE.
NEW-LINE.
ENDIF.
ENDLOOP. [code]
what happens
Balance before was 36
now it is 36 - 5 + 2 = 33.
i.e., 36 - days of old entry + days of new entry.
is using 'BAPI_ABSENCE_GETDETAILEDLIST' and 'BAPI_ABSENCE_CREATE' incorrect.Found the solution
can not use
'BAPI_ABSENCE_GETDETAILEDLIST'
and
'BAPI_ABSENCE_CREATE' in sequence
as the internal table p2001 called in 'BAPI_ABSENCE_GETDETAILEDLIST' does not get refreshed fro the next call to 'BAPI_ABSENCE_CREATE' as they are in the same function group.
using "BAPI_PTMGRATTABS_MNGCREATION" instead of 'BAPI_ABSENCE_CREATE'.
bilal -
How to upload data in infotype 0025 (Appraisals)
I want to make an upload program for infotype 0025 (Appraisals). The program will upload the data in 'Potentials' but I cannot make a recording work in it. Each time the system posts the data into next row and recording does not work since the line number is fixed in recording. There is no + sign to add a row at the top. Can someone please tell me a way to do this or if there is a Function Module that can upload data into infotype 0025.
ThanksDear Sohaib,
This upload could not be performed by BDC recording. You will have to make use of around four Appraisal BAPI's to create an entry in Infotype 25(Appraisals). I had the same scenario of uploading appraisal data here at NBP(National Bank of Pakistan). Here is the link for the article i wrote,covering this topic in depth,along with the complete solution:
http://scn.sap.com/docs/DOC-32084
If you like this article,kindly flag it as a 'Correct Answer.
Regards,
Fahad
Maybe you are looking for
-
Hp LaserJet CM1415fnw major driver problem
hello everyone, I have a HP laserjet CM1415fnv that has a major driver issue under Windows 8.1 64-bit. The printer just stopped working and I found that I could not even remove the printer from Devices and printers without causing an issue. If
-
How do I update and sync a new Iphone without adding an old Iphones Info?
I used to have an I phone 3 that was backed up on my laptop. I then got a new Iphone 4 and have never synced or updated it in a year(I know that sounds crazy lol). I want to sync and back up the info on my newer Iphone 4 without adding what was on my
-
Problem with services hierarchy and purchase order
Hi I'm in Srm 7 EHP8(classic scenario) and i have a problem with services hierarchies: I create a Purchase requisition in ECC with the next structure: 1.Hier 1.1 Serv1 1.2 Serv2 1.3 Serv3 Then I upload this PR to SRM(I activated the BBP_EXTLOCALPO_BA
-
itunes is saying that my iphone is in restore mode and that i need to restore my phone in order to use it. i just wanted to update my phone, what do i do?
-
Hello, I got the data from database and then put it in to the vector to show it in JTree, so i passed the vector from JTree's Constructor, it shows me the leaf as it should do. Is there any way that i pass something to JTree and it automatically make