Entries in SMQ1 and RSA7

hi,
I have few delta queues running very fine in system.But I am bit
confused about tcodes smq1 and rsa7.If i am not wrong after running all jobs
( i.e. fetching data into BW ) entries in quesue must show 0.But it is not happening.
When will they become 0 or they never show as zero.
Thanks,
Prasanna N.

HI,
If it is production system before upgrade get an outage of about 20 to 30 min and run Collective run jobs and move the delta queues from LBWQ to RSA7 and then to BI. As you are pulling the deltas during outage no posting will be there and you can leave the system for basis for outage.
It is mandatory to clean up the queues before giving the system for upgrade as during upgarde there may be possibility of queues being corrupted saying change in structures and it may raise issues during upgrade open queues are available.
Hence clean up the queue during outage ie lock all users for posting and do the activities.
Thanks,
Arun

Similar Messages

  • System refresh - SMQ1 and RSA7

    Could someone please explain what I should do with SMQ1 and RSA7 after a system copy?
    I assume I would delete all queues which are pointing to old sid.?
    thanks
    Jexun Wikdfire

    Hi,
    SMQ1 : outbound queue for qRFC Monitor. this transaction is used  to monitor the status of the LUWs in the outbound queue and restart any hanging queues manually.
    For the details please see the link below..
    http://help.sap.com/saphelp_nw2004s/helpdata/en/76/e12041c877f623e10000000a155106/frameset.htm
    RSA7: In R3 it's show the delta queues for all data sources in the same source system.
    For like  Data sources in R/3 will have their delta queues in R/3 and hence these will be displayed in RSA7 in R/3.
    The main purpose to use RSA7 is to maintain the BW delta queue, it will generally show the status and the data source having the delta mode active .
    You have to first  check the data source in the delta mode which are not getting populated in the RSA7 t-code .
    Check the following link for the details..
    http://help.sap.com/saphelp_nw04/helpdata/en/6f/66bca6ae43744283d74f1e456ff6c0/content.htm
    Regards
    Bhuban

  • Difference between SMQ1 and RSA7 in CRM system?

    We all know that in R3 systems and for LO Cookpit applications, SMQ1 can display outbound queue which usually contains the updated records on R3 systems for LO Cookpit application data and then after scheduled V3 job, these updated records on R3 systems can be moved from the outbound queue (SMQ1) to Delta queue (RSA7) and wait for BW Delta extraction.
    However in CRM systems, there should be no such scheduled V3 job, does that mean SMQ1 = RSA7 in CRM systems, or in other words, both T-Codes or the Outbound queue (SMQ1) and the Delta queue (RSA7) show the same updated records and wait for BW extraction?
    Anyone's answer is greatly appreciated!

    Hi
    RSA7 will hold the delta records nothing but delta queue.But in SMQ1 is used to delete the entries(data) in the delta Queue.
    Thanks
    Ajay

  • Not getting entries in SMQ1 and SMQ2

    Hi,
    I have implemented the concepts said in the below said blog.
    /people/community.user/blog/2006/11/04/how-to-serialize-idoc-xml-messages-fed-into-xi
    Still I'm not getting the entries in SMQ1 (R/3) and SMQ1(XI) systems.
    Can any one tell me the problem in my case?
    Regards,
    Thiyagu

    Hi,
    >>>How to bring entries in SMQ1(ERP)? Currently I could see Queue name
    as SAP_ALE_MYNAME in WE05(in help dialog box).
    what can I suggest...
    you wouldn't happen to have one of those:
    www.sap-press.com/product.cfm?account=&product=H1935
    queued IDOCs described in both ways XI - ERP and ERP - XI
    with screenshots in my book
    but basicalls you just need to specify queue name in WE20
    and in receiver adapter case additionally queue processing in IDOC channel
    that's all there is
    >>>And I am using qRFC for this scenario.So, how can i see entries in SM58?
    this was just to check if you actually configured if correctly and we're
    talking about the same thing
    Regards,
    Michal Krawczyk

  • BI upgrade and RSA7 queue

    We are upgrading our BI 3.5 to BW 7.3 with Unicode Conversion now. I am aware before the upgrade, queue in RSA7 should be empty to ensure delta works after the upgrade.
    We have a very long BW downtime windows, like say 3 days,  due to BW DB size, the problem is we have a VERY LIMITED downtime window, like say 6 hours, for our ECC transaction system. We can not lock users & suspend background jobs in ECC for 3 days to prevent data from being filled into RSA7.  Is there a way to solve this problem so delta still work after BI upgrade?
    TIA,
    James

    There is no need to lock R/3 ECC users. before upgrage extract data from R/3 . after upgrading BW , activate all infosource & tranfer rules. Whenever Upgrade activity is over in BW , extract data from ECC( R/3).
    We will stop BW for 3 days, during those 3  days I believe there will be more data was pulled into RSA7 queue, that will cause a delta issue after BW upgrade.
    If there are any entries in LBWQ and RSA7 it will not allow upgrade to move forward.
    We are upgrading BI, not ECC. If there are entries in LBWQ & RSA7 in ECC, how does this stop BI upgrade? Thinking about we even disconnect the network between ECC & BI, we still can upgrade BI if we do not take delta into account.
    1) just run the V3 jobs which gets data from SMQ1 and LBWQ to RSA7.
    2)Cancel the V3 job in ECC system.
    3) Run your delta IP's which picks data from RSA7 to BI system.
    This sound reasonable and I am happy with this.
    I am the Basis and I need ask BW consultant to have a look at this approach.

  • SMQ1 and SMQ2 queues stuck

    Hi All,
    We are using ISU and CRM system for Retail business, Always work flows and lot of business transactions will perform in those systems and replications will happen in both systems.
    Due to this reason lot of entries are present in SMQ1, SMQ2 and SM58 will present. We are continuously monitoring though some times some entries are are found in sysfail status. due to this lot of entries are piled up and queues becomes very high amount.
    As a work around, If we unlock the queue ( sysfail entry ) two to three times the entry will go and the remaining entries will start move.
    Currently our requirement is can we do this kind of this as automated ? I mean as per conditions it will unlock the queues automatically ?
    Please suggest me in this case.
    Thanks in advance.
    Pavan.

    Hi Dustin,
    Thanks for your reply. I had gone through the mentioned notes and say about it is not recommended to use regular basis. Here our requirement is need to check the sysfail entries in the queue. Need to unlock the queue twice or thrice to re-process the entry. If any data issue our CRM middle ware team can handle.
    The major purpose is to unlock the queue entries which can re-process automatically without manual correction.
    I like to proceed with Deepanshu suggestion to check with ABAPer. before that I need to check with our CRM middle ware team to get the list of error which can process through unlocking the queue.
    Will keep you posted the updates. Thanks a lot for your time and response.
    Thanks,
    Pavan.

  • G/L Account mentioned on line level does not get hit in Journal entry on GRPO and AP Invoice in SAP B1 9.0 PL - 11

    Hi,
    G/L Account mentioned on line level does not get hit in Journal entry on GRPO and AP Invoice in SAP B1 9.0 PL - 11
    I am creating an independent AP Invoice, there are two issues:
    1. On line level G/L Account field is not open for selection
    2. I have then selected and updated the account on Form Settings. Same account gets updated on line level.
         In Journal Entry selected G/L account on line level shall be hitted. But it does not put any effect on JE. Accounting is set by Warehouse. It picks up accounts from warehouse only.
    Need help its urgent.
    Thanks in advance.

    Invoice is Item Type.
    G/L Accounts are set by Warehouse. But if explicitly we are want to change the account on line level in that case, it is not getting reflected in Journal entry. On AR Invoice same scenario works perfectly. On line level I can change the accounts explicitly and have the effect on Journal entries.
    Issue seems to be on AP side only.
    As required please find attached the screen shots.
    JEwith mapped GL Account on Warehouse
    JEwith different GL Account on line Level via Form Settings
    Thanks & Regards
    Sonil

  • Icloud calendar is no longer syncing to outlook although it previously did. If I make a calendar entry in outlook and hit the iCloud refresh, it does sync to my iphone, ipad. However if I make a calendar entry on my iphone or ipad it won't sync to Outlook

    icloud calendar is no longer syncing TO outlook although it previously did. If I make a calendar entry in outlook and hit the iCloud refresh, it DOES sync to my iphone, ipad. However if I make a calendar entry on my iphone or ipad it won't sync TO Outlook. Sync has been working up successfully both ways until this last week. Any ideas?

    icloud calendar is no longer syncing TO outlook although it previously did. If I make a calendar entry in outlook and hit the iCloud refresh, it DOES sync to my iphone, ipad. However if I make a calendar entry on my iphone or ipad it won't sync TO Outlook. Sync has been working up successfully both ways until this last week. Any ideas?

  • Generation of Alerts for errors in SMQ1 and SMQ2

    Dear Experts,
    When messages get stuck in queue (SMQ1 / SMQ2) due to some error, we donu2019t get any alert notification (E Mail) from system. Normally we get below mentioned errors in SMQ1 or SMQ2.
    1. Permanent error in BPE processing.
    2. Error while accessing table.
    Can you please suggest how do we generate alert notifications for the above errors in SMQ1 and SMQ2.
    Thanks
    Dhwani Kamdar

    If u have CCMS configured for your landscape, then it could be possible. Else its not possible in my opinion.
    http://help.sap.com/saphelp_nw04/helpdata/en/8b/ceea3b31aac554e10000000a114084/frameset.htm
    Regards,
    Prateek

  • Duplicate entries in REGUH and REGUP table

    Dear All
    Whenever we make payment in SAP either through FBZ5 or APP or any other payment transactions, SAP updates 2 tables REGUH and REGUP tables.
    I believe SAP allows to make full payment for given invoice only once.
    We are seeing some duplicate entries in REGUH and REGUP table for the given Payment document and Invoice.
    Does anybody faced similar kind of issue
    Regards
    Madhan D

    I have been facing same kind of problem but in REGUP table, in Payment programe I have make cheque formart in smartform and made Z copy of payment program ZRFFOUS_C, I have also not find out the solution yet, it might be the issue of Z programe or SAP. I am using the ECC5.
    I have to control this issue during printing cheque and delete duplicate entry. but still REGUP table have the duplicate entry.
    if you find some solution please share with me
    Regards

  • Need to log entries in CDPOS and CDHDR

    We have a custom table and would like to log entries in CDPOS and CDHDR for any changes. Is there any methos or setting where by this can be done?

    at the data element level, you should check the checkbox CHANGE DOCUMENT. This appears on  FURTHER characteristics tab of any data element.
    if this is checked,all the changes will be logged automatically.
    regards
    srikanth
    Message was edited by: Srikanth Kidambi

  • I want to type "0800" or "20.00"; Pages automatically "corrects" the entries to: "800" and "20." !  How can I turn this automatic correcting OFF?

    In my business it is critical that I be able to enter numbers in the format I choose.  I want to type "0800" or "20.00"; Pages automatically "corrects" the entries to: "800" and "20." !  How can I turn this automatic correcting OFF?  I am a relatively new user of Pages and cannot find a means of turning the autocorrect OFF.or of setting the number formatting rules.

    Pages v5.5.2 does not change 0800, or 20.00 when entered as body text for me. There is nothing in substitution, or Pages preferences settings that can effect these values.
    However, when typed in a Pages table cell with the wrong data format, mischief does occur. In order to preserve 0800, select the Cell tab on the format panel, and set the cell data format to Text, or a custom data format. To preserve 20.00, you must set that cell data format to either Automatic with 2 decimals, or Number with 2 decimals.

  • Purpose of Entry/Check Table and Currency Quantity Fields...!

    Hi......!,
    I want to know what is the purpose of this   Entry/Check Table and Currency Quantity Fields, while creating a table in DDIC .
    give me a clear explanation .....!
    best answers would be rewarded.
    thanks
    prasad

    Hi Prasad,
    All the Modules in SAP are inter related,
    So their Tables also must be related and must be valid
    and they are related to foreign key relation ships
    and also we can provide the list of input values using search helps
    to know what the search helps and check tables are assigned to the particular  field they provided the tab
    In the currency fields or quanitiy fields we only enter the amount but not the units,
    so the units are assigned if we provide the reference field and table , and so that tab is provided to check what are reference fields and tables and also to assign new fields
    hope I am clear
    Reward if helpful
    prasanth

  • Role of SMQ1 and SMQ2

    Hi,
    What is the use of SMQ1 and SMQ2 in the LO.
    can some one please elaborate.

    Hi,
    SMQ1 u2013 qRFC Monitor for the outbound queue You use this transaction to monitor the status of the LUWs in the outbound queue and restart any hanging queues manually.
    SMQ2 u2013 qRFC Monitor for the inbound queue. You use this transaction to monitor the status of the LUWs in the outbound queue.
    Check it
    http://help.sap.com/saphelp_nw04/helpdata/en/76/e12041c877f623e10000000a155106/content.htm
    Thanks
    Reddy

  • Purging the cache entries accordingto table and SA

    Hi Gurus,
    I have few questions on Cache purging
    1>How many types of purging.
    2>Is it possible to purge the cache based on tables i.e.(if entries are generated on table A only that entries should purge in cache manager).
    3>Is it possible to purge the cache based on Subject Areas i.e.(if entries generated on subject area A only that entries should purge in cache manager).
    4>supose in cache manager there are 100 entries and i want to purge only selected entries i.e.(if i want to purge 25th, 50th and 75th,100th entries ) how i can achieve this.
    Regards,

    The same you can get it from Helpfile
    To purge the cache manually with the Cache Manager facility
    Use the Administration Tool to open a repository in online mode.
    Select Manage > Cache to open the Cache Manager dialog box.
    Select Cache or Physical mode by selecting the appropriate tab in the left pane.
    Navigate the explorer tree to display the associated cache entries in the right pane.
    Select the cache entries to purge, and then select Edit > Purge to remove them.
    In Cache mode, select the entries to purge from those displayed in the right pane.
    In Physical mode, select the database, catalog, schema or tables to purge from the explorer tree in the left pane.
    In Cache mode, you can purge:
    One or more selected cache entries associated with the open repository.
    One or more selected cache entries associated with a specified business model.
    One or more selected cache entries associated with a specified user within a business model.
    In Physical mode, you can purge:
    All cache entries for all tables associated with one or more selected databases.
    All cache entries for all tables associated with one or more selected catalogs.
    All cache entries for all tables associated with one or more selected schemas.
    All cache entries associated with one or more selected tables.
    SAPurgeCacheByQuery. Purges a cache entry that exactly matches a specified query. For example, using the following query, you would have a query cache entry that retrieves the names of all employees earning more than $100,000:
    select lastname, firstname from employee where salary > 100000;
    The following call purges the cache entry associated with this query:
    Call SAPurgeCacheByQuery('select lastname, firstname from employee where salary > 100000' );
    SAPurgeCacheByTable. Purges all cache entries associated with a specified physical table name (fully qualified) for the repository to which the client has connected.
    This function takes up to four parameters representing the four components (database, catalog, schema and table name proper) of a fully qualified physical table name. For example, you might have a table with the fully qualified name of DBName.CatName.SchName.TabName. To purge the cache entries associated with this table in the physical layer of the Oracle BI repository, execute the following call in a script:
    Call SAPurgeCacheByTable( 'DBName', 'CatName', 'SchName', 'TabName' );
    NOTE: Wild cards are not supported by the Oracle BI Server for this function. Additionally, DBName and TabName cannot be null. If either one is null, you will receive an error message.
    SAPurgeAllCache. Purges all cache entries. The following is an example of this call:
    Call SAPurgeAllCache();
    SAPurgeCacheByDatabase. Purges all cache entries associated with a specific physical database name. A record is returned as a result of calling any of the ODBC procedures to purge the cache. This function takes one parameter that represents the physical database name and the parameter cannot be null. The following shows the syntax of this call:
    Call SAPurgeCacheByDatabase( 'DBName' );
    For Q4:
    SAGetSharedRequestKey. An ODBC procedure that takes a logical SQL statement from the Oracle BI Presentation Services and returns a request key value.
    The following shows the syntax of this procedure:
    SAGetSharedRequestKey('sql-string-literal)
    Pls mark if helps

Maybe you are looking for