Entries in table CDHDR for transaction MM02 missing after upgrade to ECC6.0
Hi,
I am supporting a client who has just performed an upgrade from 4.7 to ECC6.0 on their test system. We try and use transaction MM04 (display material master changes) or MM02 and view changes to the material master but there are no entries.
During the upgrade, the entries for transaction code MM02 in table CDHDR have been lost. Can anybody give me assistance on how to avoid this when performing the production upgrade, or even better, is there any way to get these entries back?
Thank you.
Sharon.
That shouldn't happen - entries shouldn't get lost.
Is there anything in the CDHDR table (by browsing it with SE16)? If not, then something went wrong during the upgrade....
Have there been modifications to the table? Is the the table active in SE11?
Markus
Similar Messages
-
Error "No entry in table T589A for P" while creating new Infotype
HI,
I've created a new infotype (9605). All the tables, structures, screens etc. have been created using transaction PM01 successfully. But upon execution of Infotype from PA30, the infotype screen is displayed with the following error:
"No entry in table T589A for P"
Any input will be highly appreciated.
Thank you,
Farooq.Hi Farooq,
Untill and unless the the field PSYST-IOPER is cleared explicitly in the program MP960500 (in PBO modules), this error should not occur.
Also is this error is coming only for 9605 infotype ? Also is any other info availaible in the error message such as entry in table t589a is not available for which value of OPERA (INS, MOD, DEL, LIS etc) ?
Regards,
Shrinivas -
How to maintain PO Header Text entry in table T166K for different PO Type
Hi,
Can anyone tell me if there is a config transaction ( or path ) to maintain PO Header Text entry in table T166K for different PO Types
Thanks
ShrikantSpro->Material Management->Purchasing->Purchase Order->Texts for Purchase Orders.
There are 4 config setting to do for this.
Read information text.
regards,nishant
please reward if this helps -
How to maintain PO Header Text entry in table T166K for different PO Types
Hi,
Can anyone tell me if there is a config transaction ( or path ) to maintain PO Header Text entry in table T166K for different PO Types
Thanks
ShrikantResolved.
-
No entry in table T551A for key 40 GENR
Hi Guys,
Can anyone please tell me what is the meaning of this error.
"No entry in table T551A for key 40 GENR"
I am getting this error while i m trying to set work schedule rule.
Thanks
Deepali
Edited by: DeepaliHCM on Jan 28, 2010 10:27 AMDWS grouping , PWS grouping are connected to each other and when you create any work schedule it will get feched from different tables .. if there is no relavancy in the primary keys ,,, here it is 40 then it will throw this error
please write down on paper whatever grouping you are maintaning in TM configuration ... and check where revancy is missing
and i think maintaining it on paper for your better reference will not eat your more time -
System error -no entry in table T093 for the chart of depreciation or ccode
When checking Depreciation Areas of Company Codes in overview for experts (transaction SPRO) I first get a warning message inconsistent rounding entries were corrected.
After saving once in the maintenance transaction (as recommended in the help text) I get the following system error: there is no entry in table T093 for the chart of depreciation or company code. I checked table T093 and all entries are in there!
What else I have to correct?
Regards
Cordula Spehhi ,
yours is customizing problem only, check all steps once again in customizing. T093 is initial customizing for asset accounting. just go through below things and check based on this order all customizing.
1. Copy Reference Chart of Accounts Depreciation / Depreciation Areas.
2. Specify Description of Chart of Depreciation (COD).
3. Copy / Delete Depreciation Areas.
4. Creation of 0 Tax Codes for Non-Taxable Transaction.
5. Assign Tax Codes for Non-Taxable Transactions.
6. Assign COD to Company Code.
7. Specify Account Determination.
8. Create Screen Layout Rules.
9. Define Number Intervals.
check one by one and if you find anything missedout do it, i think max you prblm solve, if not give some more details about your problem.
thanks and regards
vk. -
No entry in table T512W for key 40 0NPA
Hi ! all
i have some problem in payroll processing.
i have delimited the wage type 0NPA with end date as 26.11.2008. This wage type was a used for EPF calculation. Now there is change in policy with effect from 25.11.2008. This wage type is no longer a part of EPF calculation. So i delimited the same wef from 26.11.2008. Now am trying to process the salary for period 01.04.2009 to 30.04.2009, i am getting an error
" No entry in table T512W for key 40 0NPA for time 30.04.2009 ".
This is an indian salary senario.
Kindly suggest the solution.
regards
Sanjay PetkarHi ! partha
Thanks for the reply.
I tried what you said
in SM30 modified V_512W_D for 0NPA and removed tick from cummulation item 11(EPF)
and processed the paybill i am till getting the same error.
I missed to mentioned that, i created the new wage type copy of the 0NPA as NPBS. As NPA is to be paid to employees but this should not be taken for EPF calculation. so i am using the new code for NPA and discontinue 0NPA.
Kindly suggest solution to overcome this problem
Regards
Sanjay Petkar -
How to add column in table control for transaction APPCREATE
Hi All,
How can i add the additional column in table control for transaction APPCREATE.
There is structure PT1045_EXT present behind table control. But not found any customer exit or badi to display on screen.
Please help...You can add new columns
If you add new columns in tr. PHAP_CATALOG -
IndVal of wage type 1BA0: No entry in table T7INA9 for key 40TL101BA0A on 2
Hi,
I have configure allowance grouping,wage type model,Pay scale type,Pay scale Level, employee group,Employee subgroup,Level.After that I hire one employee useing "T-CODE PA40".But same time system has giving following error message :- "IndVal of wage type 1BA0: No entry in table T7INA9 for key 40TL101BA0A on 20070824" so I am unable to update infotype 8.Please give me reply as early as possiable.
Regards
Subhedar B.table t510
MANDT MOLGA TRFAR TRFGB TRFKZ TRFGR TRFST LGART ENDDA BEGDA BETRG
100 IQ 01 01 1 GRADE 13 1 31.12.9999 01.01.2012 0.00
100 IQ 01 01 3 GRADE 13 1 31.12.9999 01.01.2012 0.00
t511
MANDT 100
MOLGA IQ
LGART 1019
ENDDA 31.12.9999
BEGDA 01.01.1992
ABTYZ 1
WKTYZ 11
OPKEN
ZEINH 030
KOMBI 2
BTMIN 0
BTMAX 0
ADSUM X
MODNA TARIF
MODSP
RUTYP
RUDIV 0
ADDJN
MOD01 1
MOD02
MOD03 A
ANMIN 0.00
ANMAX 0.00
V_511_B
Wage Type 1019 Bonus Percentage 01.01.1992 31.12.9999
EE Subgroup grouping Personal subarea
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9
1 1 1 -
Problem with No entry in table T591B for 0015 08 E101
Hi all,
This is our first year using SAP and we're approaching our first Year End and so want to make the E Wage Types available for us in IT0015, E121 is already OK and I can enter data in IT0015 for that WT no problem. I've added WT E101 to the 0015 Additional Payments in the IMG and it shows as being allowed for IT0015, this has created entries in the Permissability, etc. in the IMG and I've updated permisability for the ESG to allow for all ESG / PS, etc. - so all looks fine when I work through the steps for Additional Payments in the IMG, but when I try to save E101 in IT0015 I get a message about 'No entry in table T591B for 0015 08 E101' .
When I look at this table it's called 'WT dependent retroactive accounting trigger' and I've not seen it before despite setting up many Wage Types and I can see E121 is in this table but E101 isn't - but I can't see how I can add or copy anything in this table - there are no options. So I'm assuming this is usually auto updated by creating an entry in another table but I have no idea how to find where and can't find any documentation or other forum messages for this table.
Has anyone else come accross this before or know anything about this table - has anyone else had trouble when wanting to allow E Wage Types to be used for Year End adjustments?
Thanks in advance for any advice anyone can give me
NyreeOlnly wt configured to be permissibled on a few infotypes (e.g. 0014, 0015, 0267) would need to be configured in V_T591B. The purpose of this is to control whether these wt are allowed to be changed after payroll is already run for the ee.
All you need to do is maintain this entry through view V_T591B - add entry for wt 'E101' for infotype 0015 / country '08'. The indicator (V5591B-ABWRU) can be '' (allow change to wt after proll is run), 'X' (warning if change after proll is run), 'E' (hard-error if change after payroll is run) .
Rgds. -
No entry in table T503 for "D"
Hello Experts,
while trying to hire an employee on the IDES server, the message "No entry in table T503 for (EEgroup) " ... i checked the T503 table (T503K, and V_T503Z via TCode SM30) ... and found my EE groups and subgroups !! (as assigned through IMG) ... but still I get the same error message and i don't know why.
FYI : I was told that the IDES server is not configurable !! that is , I may not find the expected results that i make on IMG (I may create EEgroups and subgroups, assign them, but still I may not find them as expected!!)
Note:
when I choose an employee group (while hiring) and then i try to select EE subgroups, the status bar says that "No Values Found" though i had assigned EEsubgroups to the EEgroups!!
please tell me what is going on, i am really confused !!
Thanks in advance.Hi,
1. Create the Emp Group if required through SM30 table T501. If not atleast check your EG.
2. Create the ESG if required thorugh SM30 table T503K. If already created check your ESG here.
3. For the combination of your EG and ESG make sure that country 99 (other countries) is ticked in V_T503Z via SM30.
4. Maintain the Employee attributes in V_503_C via SM30
In case if your EG or ESG is 01 then make sure that it is ZERO ONE and not O(letter) ONE.
hope this helps.
Ajay -
No entry in table T001P for key - PT60
Hi Folks,
I´ve got the same error people have reported since some time in this forum, but I didn't find a clear reason or way to fix the issue.
The error "No entry in table T001P for key" is displayed for only 1 employee during time evaluation.I've checked table T001P, IT 0001, IT 0007, and everything seems tom be OK. I have other employee in same Work Schedule and other guy with same information in IT0001, but only this guy has the issue.
In other thread someone put "Make a blank entry in table and this fixes the issue", but it's not clear in how to do it or why this fixes the issue.
Thanks for any help.
(rewarded with points)HI,
Check IT 2006 and IT0001. A valid record must exist in IT 0001 for the last 2006 record. Check BEGDA of IT2006 and review that is greater than BEGDA and lesser than ENDDA of any valid record in IT0001
If this is not happening, then RPTIME program returns empty values in table T001P and this causes the "no entry in table" message.
Regards, -
No entry in table T71ADM10 for key 'X'
Hello,
While uploading data from R/3, I get this error message:
'No entry in table T71ADM10 for key "X"'
But when I look in the R/3 table T71ADM10, then I am able to find entries for the key 'X'.
Additionaly in the BI DataSource Monitor, if I click the 'Maintain PSA' button, all records are shown as updated successfully. No erronous records are returned.
Under the 'Details' tab, 'Extraction' shows error; but 'Transfer' and 'Processing' Steps are shown successful.
Please advice.
Thanks & Regards,
Labanya.Hello Labanya,
As you telling data is available in PSA . So there is need to do update from fro PSA. So Just select that request number goto RSA1--> PSA. Then find your Request number. Check whether it has with red mark. Then right click on mouse and select "start the update immediately". And check whether you are getting same error or not.
Thanks,
Abha -
Hi,
The HR IDOCs are ending in error in our production system with the error:
No entry in table T527X for E
Message no. RP301
Diagnosis
The entry values must be stored in table T527X. The " E" value(s) are not in this table.
When the IDOC is reprocessed manually or by the standard program, the IDOC has OK status.
The error just started from today and we do not know as to what is causing this error.
I have checked in the FM that is processing the IDOC and I could not find nay reference to the table T527X or that message number.
Can anyone please help?
Regards,
ArchanaThe IDOC is being processed by a custom Function module but this program was modified
and the changes were moved to the system last week.
If IDOC was getting processes Successfully till last week, Customization done recently is the Culprit
I am thinking about the complexity of the Standard Function (which almost processes all
types of HR master data and how developer must have managed to write Custom code for all of this.
Quite Complex I think.
The main change was that in some updation BDC is now used to update the screens
directly and then PA41 tcode is being called. Do you think this might cause the issue?
But then it works in reprocessing - strange.
In some places, the standard function module is used (code not changed for this) -HR_MASTER_MAINTAIN -
(i think).
Well what all I can say is track the error message while running the IDOC for first time and
that will only give you the solution.
Regards
Shital -
Entries in table BWOM_SETTINGS for PARAM_NAME = 'OBJSELSIZE '
Hello All,
The entries in table BWOM_SETTINGS for PARAM_NAME = 'OBJSELSIZE ' in our ECC system were as follows originally:
OLTPSOURCE = ''
PARAM_NAME = 'OBJSELSIZE '
PARAM_VALUE = 'X'
At that point we started using delta extarctor 0PM_OM_OPA_2 and it had a very poor performance.
SAP asked us to implement note 1040072.
As a result of applying that note, the BWOM_SETTINGS table has 2 entries for PARAM_NAME = OBJSELSIZE.
1. OLTPSOURCE = ''
PARAM_NAME = 'OBJSELSIZE '
PARAM_VALUE = 'X'
2. OLTPSOURCE = '0PM_OM_OPA_2'
PARAM_NAME = 'OBJSELSIZE '
PARAM_VALUE = 'X'
Things were fine until we added more init selections to another CO extractor, 0CO_OM_OPA_6.
0CO_OM_OPA_6 deltas were taking around 2 hours for original init selections:
Fiscal year / period 2007001 2007012
Fiscal year / period 2008001 2020012
Controlling Area 3000
Recently we added more init selections and now selections are :
Fiscal year / period 2007001 2007012
Fiscal year / period 2007001 2020012
Fiscal year / period 2008001 2020012
Controlling Area 3000
Controlling Area 4000
Controlling Area 5000
The extraction is now taking unacceptably long time, about 15 hours.
I am not sure if it is because adding more inits.
I have a feeling the entries in BWOM_SETTINGS for OBJSELSIZE are incorrect.
According to note 836740 should they be as below?
OLTPSOURCE = '0CO_OM_OPA_6'
PARAM_NAME = 'OBJSELSIZE '
PARAM_VALUE = 'X'
OLTPSOURCE = '0PM_OM_OPA_2'
PARAM_NAME = 'OBJSELSIZE'
PARAM_VALUE= 'X'"
One more question. If we change the BWOM_SETTINGS entries to as above, will that affect other CO extractors?
For instance, we use 0CO_OM_CCA_9 very widely and it runs very fast currently. I just want to make sure we dont mess up its performance by modifying the entries in BWOM_SETTINGS. May be add one more entry in BWOM_SETTINGS for 0CO_OM_CCA_9 too?
Sorry about the lengthy post.
Any help is greatly appreciated.
Thank you.As stated in [OSS Note 836740 - Delta extractors CO: OBJSELSIZE DataSource specific|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=836740], there should be parameter OBJSELSIZE entries, with a value of X for the following CO DataSources:
0CO_OM_CCA_9
0CO_OM_OPA_6
0CO_OM_ABC_7
0CO_OM_WBS_6
0CO_OM_NAE_2
0CO_OM_NTW_2
0OC_OM_NWA_2
The independent entry, where the DataSource is blank, should also be prsent for the OBJSELSIZE parameter with a value of X. [OSS Note 1040072 - 0PM_OM_OPA_2: Poor performance|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1040072] shows that it's also needed for the 0PM_OM_OPA_2 DataSource.
Your entries for 0CO_OM_OPA6 and 0PM_OM_OPA_2 are correct. You should add 0CO_OM_CCA_9 and any other DataSource in the list above. If they're not listed, they are supposed to be taken care of by the independent entry (DataSource is blank).
Maybe you are looking for
-
Plan cost in Co03 - Itemization
Hi all, I enter Co03 and Go to Cost - Cost Itemization - Plan Cost. This Plan Cost is constance after i TECO this order. So I want to know Where does SAP store this Constance Plan Cost (PLAN COST after Teco) ? Best Regard,
-
How to check the EHP level installed in Collection Management
Dear all, How do I know under what EHP my Collections & Dispute Management modules are running?. Another question I want to ask: which EHP contains standard reports to analyse worklists? Thirdly, which is the latest EHP that should be activated to ru
-
I am trying to add this effect and can't locate it.
-
Unable to download OS X Mountain Lion
iTunes have taken my money via the normal channels as like purchasing any APP but i'm unable to download the mountain lion, is this a common issue? I do see the download button which would suggest that the purchasing system is okay. Thank you in adva
-
If someone who holds a UK itunes account wants to send gift amount to a friend with an Australian account, can it be done?