Entries in the smartform are repeating !!
Hi,
I tried to develop a smartform for printing sales order header (vbak) details.
The entries are repeating in the output. for example, for "2 orders, 4 entries" , for 3 orders, 9 entries".....
Please let me know what could be the wrong in the form.
Regards,
Naveen
Hello Naveen,
I think u have given the itab in table lines as well as loop.
If it is the case remove any one of it loop or table line entry!!
Regards,
Subbu
Similar Messages
-
HT1386 When I sync outlook for mac 2011 calendar to iPhone the dates are repeated?
When I sync outlook for mac 2011 calendar to iPhone the dates are repeated?
OK, I think I figured it out, with Apple's iCloud instructions and a little help from campus tech support. This only applies to people using Outlook with Microsoft Exchange.
Enable iCloud on your computer (running Lion) and your iPhone. http://www.apple.com/icloud/setup/mac.html
Then go to your iPhone's Mail icon, click on Add Account > Microsoft Exchange and enter your login info.
Doing this transferred my work email and calendar to my phone wirelessly. -
The problem seems to have started since I enabled iCloud and the two Apple devices keep beautifully in synch. I've probably just got some setting wrong but I'm a bit lost and would appreciate some help.
If I put a "new" calandar event in Outlook and then synch this does show up on the Apple devices so the problem is just one way ... if I add something on one of the Apple devices I don't get it to show-up in Outlook.
Many, many thanks for any help from London.Thank you for being patient with a "beginner" :-) I have now realized that I had no understanding of how iCloud would affect things.
Calendar: On the iPhone I have set the default calendar to "From my PC" and now things are working ok. I have done the same on the iPad and this is also working ok. I accept that to keep things in sync I have to connect (by USB) to the PC but this is ok.
Contacts: I was about to make the equivalent changes regarding Contacts and have done so on the iPhone only to find that there is no "From my PC" on the iPad.
Any suggestions/help would be much appreciated.
Would I be better off just getting rid of iCloud and going back to USB sync every now and then. This used to be fine for me. Perhaps I have been making things difficult by mixing iCloud with a non-iCloud device (the W7 PC).
Anyway, once again, many thanks for your patience.
Steve -
I cannot make an in-app purchase of gems in War of Clans. I keep getting the message that I "cannot connect to ITunes store." I have followed the help message in the in-game settings a number of times, to no avail. I can connect to the Store in every other area of my IPad. Suggestions please? Thanks!
Kaitlyn255 wrote:
I've been trying to complete an in-app purchase within the game "Nemo's Reef"
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
B1PO2R3SO line items are repeated
Good day,
When a purchase order (B1.2005_PO) containing 5 lines is sent from B1 to an R3 SO (ORDERS05) the IDOC is created and processed without an error, however the line items within the IDOC are repeated twice.
After downloading the message from the control center message log it can be seen that all the lines are contained at the following path:
/b1im:B1IMessage/b1im:Body/b1im:Payload/BOM/BO/Document_Lines/row
which is correct, however the same path is repeated a second time and again contains all 5 lines.
As a result, when the IDOC is created the E1EDP01 segment is repeated 10 times.
Please help! How would one trace the cause of this error? PL6 is installed, could it be that the upgrade was not completed correctly?
Thank you,
HenrouxHi Felipe,
Thanks for the information. I've reinstalled & upgraded and it has fixed the problem. I wasn't sure where the cause of the problem was.
It is a relief to know a bit more of the cause since one never knows when an error wil reoccur!
Regards,
Henroux -
Hi,
Actually my requirement is to send the smartform through email using medium external send..If the email Id of the recipient is not present then the smarform has to be sent through fax using medium external send.So I have changed the value of nast-nacha from 5 to 2 and added the following code to my program.
ls_control_param-device = 'TELEFAX'.
ls_control_param-preview = 'X'.
ls_control_param-no_dialog = 'X'.
ls_control_param-getotf = 'X'.
ls_composer_param-tdtitle = 'Advance shipment notification'.
ls_composer_param-tdtelenum = lv_telfx.
ls_composer_param-tdteleland = lv_land1.
ls_composer_param-tdschedule = 'IMM'.
ls_composer_param-tdsenddate = sy-datum.
ls_composer_param-tdsendtime = sy-timlo.
CALL FUNCTION lf_fm_name
EXPORTING
archive_index = toa_dara
archive_parameters = arc_params
control_parameters = ls_control_param
mail_appl_obj =
mail_recipient = lv_recipient
mail_sender = lv_sender
output_options = ls_composer_param
user_settings = ' '
vttkvb = vttkvb
IS_DLV_DELNOTE = LS_DLV_DELNOTE
is_nast = nast
IMPORTING
document_output_info = document_output_info
job_output_info = ls_return
job_output_options = job_output_options
TABLES xvttp = xvttp
xvtts = xvtts
xvtsp = xvtsp
EXCEPTIONS formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
While debugging i am not finding any error in the program.But in SOST transaction,it is not showing any entry for the smartform o/p which is sent through fax.
Could anyone give me a proper solution for this?Hi,
All the configuration is done in SCOT transaction to send the smartform through fax.The issue is I am able to send the smartform through fax.I am able to see that in SOST transaction.But the output is coming in abap list format.It should come in OTF format.What can be done for this?
Regards,
Hema -
Loading my RPDs into the subject area of the BI answers
Hi,
I have created my own RPds (repository files with it's own data model) and have updated the nqsconfig.ini with the following 2 entries
Star = eam_predictive_mileage_cost.rpd, DEFAULT;
Star = eam_cost_period_avg.rpd;
However when I restart the BI server and the presentation server, it only loads the schema associated with the first entry and does not load the schema associated with the second entry in the "Subject ARea" when I log in to the Oracle BI presentation server.How can I get my schema associated with the second entry (i.e eam_cost_period_avg.rpd) to load in the subject area of the Oracle BI Answers??.
ThanksHi,
actually, this is an OBI limitation ... only one repository can be served at a time.
OBI serves the repository marked as "DEFAULT", despite of its order in config file.
Joan. -
Entries in the .plist files.
I have two apps that share the same code base. I created multiple targets for them. So, for the two targets, I have two .plist files.
I am getting ready to set some of the entries that the apps need. I see that some of the entries for the Key are not available to one of them - in particular, UIPrerenderedIcon and RequiredDeviceCapabilities.
Is this normal? In my testing I see that the icon for one of these apps has the conventional Shine and the one for which I see the Key UIPrerenderedIcon, the Shine is absent.
Thanks in advance.The names are different in the two .plist files:
* Icon already includes gloss effect [YES | NO]
* Required device capabilities [Array of capabilities]
and
* UIPrerendededIcon [YES | NO]
* UIRequiredDeviceCapabilities [Array of capabilities]
But then, at the end, things are working.... -
Records are repeatedly loading for RDA DataSource
Hi
Iam trying to load the data for custom datasource into DSO . This datasource is real time enabled one .
Eventhough there is no new records are created in ECC system , the real time datasource getting the same number of old reocrds dailiy . I mean , the records are repeatedly loading into the DSO object .
Why the records are repeatedly loading into the DSO object for real time datasource .
Please let me know
Regards
mohammedHi,
In RSO2 click on a'GENERIC DELTA' and select the Time stamp and give the lower limit and upper limit
and if you are loading the data into DSO then select the radio button is "New Status of changed record"
if you are loading the data into CUBE then select the radio button is "Additive Delta".
Regards,
Yerrabelli. -
After soak test update, I get error messages repeatedly. The majority are "unfortunately, messaging has stopped", but you can replace messaging with "android os", or any other process, as it happens with more than just messaging. I have had numerous people call and ask why I didn't reply to their texts...and I look, but have not received any new texts. YES, I have restarted phone. I have cleared data as well as cache on all apps. I have downloaded the vzw messaging app, which seems silly, since it happens with several different processes and apps, but all to no avail. I am missing texts from my employer, from my family. This did happen, but rarely, before this "soak test". It is now Kitkat version 19.6.3.obake_verizon.en.US. THIS is when I started having problems...like 50 times a day kind of problems! I have seen hundreds of posts all over the internet over the past 3 days. Does no one know how to fix this??? Shouldn't there be a way to revert phone to a pre-update state? and no, hard reset did NOT work!!!! I have been with verizon for well over 15 years, but I have not upgraded my lines and will not in July either. This is ridiculous. It's not like my games aren't working, it is my messaging and "android os"...my lifeline at work!
kristinaf333,
Oh no, I am sorry to hear your messages are not working since the software update. I greatlly appreciate doing all that troubleshooting to try and get the messaging application back in business. I know how much I rely on my messages so I can understand the urgency to get this resolved. Have you had a resolution ticket opened since you started experiencing issues with your messages? Does this happen with all contacts or just some? Please provide additional information to ensure we get to the bottom of this for you.
KarenC_VZW
Follow us on Twitter @VZWSupport -
Under Options, Applications there are multiple entries for the same item. (Adobe Acrobat) . Three show Adobe Acrobat Reader 9.3 and the other shows (ask) or (save file) with no ability to select Acrobat Reader . Is there a way to edit this list to remove the duplicates and
the incorrect entry? Adobe installed a very quick update today.They are all different. Hover your mouse pointer over each of the "Content Type" descriptions and you should see a "tooltip" to see that each has a different description.
You need to update your plugins. It is important to keep them updated due to continuing security fixes and improvements in those plug-ins:
* Adobe Shockwave for Director Netscape plug-in, version 11.5 (you '''<u>may</u>''' need to update)
* Shockwave Flash 10.1 r53
* Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers
#Check your plugin versions: http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Shockwave for Director'''
#*NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
#*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place so you can find it).
#*When the download is complete, exit Firefox (File > Exit)
#*locate and double-click in the installer you just downloaded, let the install complete.
#*Restart Firefox and check your plugins again.
#*'''<u>Download link and more information</u>''': http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
#'''Update Shockwave Flash'''
#*Use Firefox to Download and SAVE to your hard drive from the link in article below
#*SAVE to your Desktop so you can find it
#*After download completes, close Firefox
#*Click on the file you just downloaded and install
#**Note: Vista and Win7 users may need to right-click the installer downloaded and choose "Run as Administrator"
#**Note: Most browsers other than IE will also get updated with this one download
#**Note: To update IE, same procedure '''<u>but use IE</u>''' to go: http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_ax.exe
#*After installation, restart Firefox and check your version again.
#*'''<u>Download link and other information</u>''': https://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash
#* Also see: http://support.mozilla.com/en-US/kb/Installing+the+Flash+plugin
#* Also see (if needed): http://kb2.adobe.com/cps/191/tn_19166.html#main_Uninstall
#'''Update Java:'''
#* Download and update instructions: https://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox -
Can I labled the same song to more than one albums? As you know, some songs are repeated in different albums.
You can make a copy of an existing song, then change the album, artwork and track number details. You cannot make the same physical file show up in two different albums.
tt2 -
Hi all,
i am facing problem while generating Test Result word document after successful execution of TestStand.
The Problem is :
i want to add rows Formatted as table headings, table headings are repeated when a table spans more than one page(marked as Red).
Example:
Page No. 1
| Test case Number | Test Step number |
| 100 | 100 |
Page No. 2
| Test case Number | Test Step number |
| 200 | 300 |
Test Result word document should generate with Table headings(marked as Red) in every pages of the document, but i am not getting as per above example.
Please through light on this.
Regards,
Susa.Hi Santiago,
Thank you very much for your valuable reply.
i want to generate MS-word report for TestStand after successful testing using MS-word2000.
Test report contains Actual values, Expected values and Pass/Fail status.
In my program i have customized all fields i can able to generate test report which contains Verification engineer name , test mode, test date, start time, end time Actual values, Expected values and Pass/Fail status.etc....
To put all values of test case number, Test step number, Actual values, Expected values and Pass/Fail status in to table for each time, i will
insert a row into table every time values arrives, once the table exceedes its page size it moves to the next page, next page should start with table row header but it start with values of above said parameters.
so i'm not able to repeat table row header for each page.
Please find the attached file for your reference.
Attched file expected.doc : This file contains what i wanted to generate MS-word report. Here table row header "Test Case Number and Test Step Number " is repeated in second page.
Attached file Actual output from source code.doc : This report generated from the source code. Here table row header "Test Case Number and Test Step Number" is not repeated in second page.
Do you know any property to set "repeat as header row at the top of each page" using MS-word ActiveX in CVI/Labwindows.
i think this information is sufficient for you,
Still if you need some information please ask me.
Thanks
Susa.
Attachments:
Actual output from source code.doc 25 KB
expected.doc 26 KB -
Smartforms : Repeation of data on the smartforms, but in ABAP is correct.
Hi all,
I am fetching the data on the smartforms by ABAP program, but when it is comming on the smartforms, it is repeat.
In the ABAP program, i have a internal table which is contain the some fields, and in the smartforms, i am using the table ->Program lines ->Text to show the data. so how am i correct it.?
Regards,Hi,
I have a internal table with data as:
doc no ref. no posting_key amount
1002 po/0012 31 15000
1002 po/0012 40 1000
1002 po/0012 50 500
and i have a four variable as: netamt, grsamt, tdsamt & othamt.
then i have a condition as :
IF WA_FINAL-BSCHL = '31'.
NETAMT = WA_FINAL-DMBTR.
ENDIF.
IF WA_FINAL-BSCHL = '40'.
GRSAMT = WA_FINAL-DMBTR.
ENDIF.
IF WA_FINAL-BSCHL = '50'.
TDSAMT = WA_FINAL-DMBTR.
ENDIF.
READ TABLE T_FINAL INTO WA_FINAL
WITH KEY BELNR = WA_FINAL-BELNR.
OTHAMT = WA_FINAL-DMBTR.
alter this conditon i want to show the data on the smartforms as:
srno. docno refno netamt(net amt) grsamt(gross amt) tdsamt(tds amt) othamt (other amt)
Regards, -
You are not authorized to read entries in the cash journal
Error while trying to access Cash journal " You are not authorized to read entries in the cash journal ".
Hi Holger,
May be they might have restricted to change password. See <a href="http://www.sap-basis-abap.com/bc/restrict-role-to-unlock-lock-change-password.htm">this</a> for more details.
Maybe you are looking for
-
upgraded-to-windows-8.1-new-window-is-losing-focus-after- 10 seconds As you are working in one window the focus just switches to the desktop and the mouse position is reset to the top right corner. Even if you are using the MAC. It is so frustrating
-
I know this is crazy, but I have a nagging curiosity about this: I have the 300 MHz Blueberry iBook. I know there is no video out on these things. But I know that there is a 20-pin display data connector inside. Is it theoretically possible to splice
-
Hi, I called someone tonight and on accident forwarded my calls to them, how do I UNfoward my calls back to my Iphone? This is URGENT, the person will not return and calls !!!!
-
How do you scroll in Safari??!!
As I was typing another message in this forum with my iPad, I realized that I could not scroll back up or down if the post was longer than the 10 lines that fill this compose box. All you can do is swish the page up or down,, but really need some way
-
About Flash Media Live Encoder
Please teach Flash Media Live Encoder. Are you preserved only in the local though provide the recording function in FME? It will be able to record directly in FMS. Does the recorded image preserve the image from the camera directly or is what has flo