Entries missing for Condition tables in TADIR

Hi,
I have downloaded certain pricing condition tables from ECC (customizing download). They got generated successfully and were visible as 'Active' in SPRO and ABAP Dictionary (SE11).
When I ran the customizing download again, all the tables had become 'Inactive' in SPRO>Customer Relationship Management>Basic Functions>Pricing>Define Settings for Pricing--> Create Condition Tables.
But at the same time, these tables are appearing as 'Active' in SE11 and condition records are also flowing for them from ECC to CRM.
Having checked the log in Transaction SLG1, there are visibly few errors stating 'Entry not found in TADIR' for some condition tables.
Any pointers to identify the source/cause of this error or how to resolve the same?
Thanks & Regards,
Vartika

Hi Vartika,
The note 457711 will be helpful for you.
Generally these errors on TADIR coversion will not cause any problems on your conditions download..These errors can be ignored.
Please check for inconsistencies between R/3 ad CRM using the note 664815 and correct them. There are reports attached to it for 4 diferent cases.
Thanks
Abishek
Edited by: Abishek Kumar Thiagarajan on Jun 11, 2009 8:58 AM

Similar Messages

  • Archiving Object - Entry missing in Customizing table for object Z*********

    Hello friends,
    We have created a archiving object in transaction AOBJ. However when i enter this object in SARA, we get this error message.
    "Entry missing in Customizing table for object Z******* "
    I have matched my object with few other archiving objects and things looks similar.
    Have you faced this kind of problem..
    thanks
    ashish

    Hi,
    I checked and i can see entry for ZSCS_TRAFO object in AOBJ.
    But when i enter ZSCS_TRAFO, i get this error :
    Entry missing in Customizing table for object ZSCS_TRAFO
    Message no. BA057
    Diagnosis
    A function cannot be executed due to a missing table entry.
    Procedure
    Please create an entry for the archive object ZSCS_TRAFO with the AOBJ transaction.
    However, a few other Z objects works well.
    thanks
    ashish

  • How to solve this "Prefix number: entry missing for system EC5 client 800"

    Hi,
       I am workflow learner, I am having theoretical knowledge on it.
    Now, I started to practice practically in my IDES server.
    I am getting an error message while I am trying to save my standard task with my object type and method and event (which were already created in SWO1).
      My error message details.....
    Prefix number: entry missing for system EC5 client 800
    Message no. 5W023
    Diagnosis
    Tasks, rules, and workflow definitions require an ID that is unique throughout all systems and clients. In this way, you can ensure that you can transport these objects from one system into another at any time (without restrictions). From a technical point of view, the uniqueness of the ID is ensured by what is known as a "prefix number". You can define a separate prefix number for every system and every client in table T78NR.
    System response
    If a prefix number is not defined in the client in which you are currently working, it is not possible to maintain (maintenance terminates).
    Even I tried to create on entry in the table T78NR, but as that is standard table, I am unable to make an entry.
    Hope we have to configure the workflow, I am not having any Basis consultant with me. Can anyone help to cross this problem.
    Thanks and Regards,
    Surender Batlanki.
    Edited by: Surender Batlanki on Oct 15, 2008 2:20 PM

    HI Surender and  Other SAP Work flow gurus
    Surender, u said, that you got the solution.
    As honestly speaking i am new to SAP Workflow. Can u please please guide me the instruction and document if any. I am practising in Test Server machine. I will be really happy that if u all GEMS helps me to get out of it.
    in Prefix number OOW4, system is asking me to enter, the Prefix number, Interval start, Interval End, and Check Sum.
    I entere the same 980 in prefix number, and i dont know what to enter the Interval start and interval end and check sum.
    Also there is some msg coming when i tried to manage some values, " NO Intervals can be reserved for this prefix number" - MSg No: 5W179.
    Please gurus help me.
    Regard
    Guru

  • Error: Prefix number: entry missing for system REP client 113  Msg no 5W023

    Hi, we're trying to study Workflow based on the manuals we downloaded online.  Upon saving, we encountered the error: Error: Prefix number: entry missing for system REP client 113  Msg no 5W023.
    Here's the diagnosis:
    Diagnosis
    Tasks, rules, and workflow definitions require an ID that is unique throughout all systems and clients. In this way, you can ensure that you can transport these objects from one system into another at any time (without restrictions). From a technical point of view, the uniqueness of the ID is ensured by what is known as a "prefix number". You can define a separate prefix number for every system and every client in table T78NR.
    System Response
    If a prefix number is not defined in the client in which you are currently working, it is not possible to maintain (maintenance terminates).
    Procedure
    Maintain table T78NR in Customizing, and create an entry for the system in question and the current client.
    Hope somebody can help me understand what this is.. thanks so much and appreciate your help..
    Thanks,
    Angela Paula

    Hi Angela,
    Please check if the Prefix number is maintained in SWU3 t-code.
    Go to Maintain Definition Environment -> Maintain Prefix Numbers and check if the prefix number is maintained.
    Hope this helps!
    Regards,
    Saumya

  • Provision account key missing for condition type FRA1 in schema ZIMPOR

    Hi,
    While maintaining the condition value in PO, the below message displayed.
    "Provision account key missing for condition type FRA1 in schema ZIMPOR"
    Thanks and regards
    Murugesan

    Go to
    Spro>MM>Pur>Conditions>Define Price Determination Process>Define Calculation Schema
    here select ZIMP and click control data
    in that maintain "Account key" for FRA1 cond type in the Account key Column..
    (Second column from right side)

  • ABAP table for "Condition table"

    Dears,
    Could you please tell the ABAP table for Condition table.
    My requirement is : I need to check a field e.g. KUNNR, in which all the condition tables KUNNR is been used.
    Thanks
    pinky

    Hi,
    Use t.code se16n, and then provide the sales order number for vbak,
    or vbap take value of field KNUMV (The internal number under which
    the system saves conditions that apply to a sales order header),
    KNUMH (The internal number under which the system saves conditions
    that apply to a sales orde itemr), and go to KONV (for vbak) and KONP
    (for vbap) enter this KNUMV or KNUMH number and execute , you will get
    all item pricing conditions for that sales order.
    For pricing record :- table KONH - Condition (Header)
                     table KONP - Condition (Item)
    with field KNUMH - Condition record number.
    hope this will help.
    regards
    Vivek.

  • Provision account key missing for condition type ZPFV in schema ZUELOC

    Hi
    We have defined the condition type ZPFV for freight value & mentioning the same while creating po and in past we had prepared so many po by using this.
    we hv not change any thing & today we are getting message " Provision account key missing for condition type ZPFV in schema ZUELOC"
    What to do???????
    Thanks
    Ketan Vala

    hi..
    If the accrual is ticked in condition type in M/06, it should have an account key assigned to the condition type in the pricing procedure in M/08.
    Go to your contion type ZPFV and check whether you have checked Accrual or not..
    then go to ur pricing procedure ZUELOC and check the last two colums for your condito type i.e. Account Key and Accrual Key.
    Maintain these..
    try this if it works.
    Thanks...

  • Provision account key missing for condition type FRB1 in schema

    Provision account key missing for condition type FRB1 in schema is the error coming while i enter freight value at PO
    how to set this
    krishna

    Hi Krishna,
       Go to Pricing procedure using M/08 , here against the Freight condition type ( FB1), enter the accrual key ( ex. FRE)and account key ( ex. FR1 or FR2).
    After saving to the customizing request, again create the PO.
    Thanks & Regards,
    Amjad

  • Entry missing in T169V table for Co. code

    Hi Friends,
    We made one new company code & did all the settings. When we are doing MIRO we got one error saying that Co. code is not exist in T169V table.
    Table T169V is for Default Values, Invoice Verification.
    We might have missed some customization, can any body tell where to do.
    I can do it directly from tables also, but not advisable.
    Regards
    Sai Krishna

    hi
    goto
    SM30 here u can get the customizations related to a perticular table
    goto SM30 give table no and click on customizing then click on continue without project
    here system wilkl give u all the customizations for this table
    now if we take ur e.g. of T169v then u have to check for the entry of MM  as the problem is occuring in MIRO
    u have to go to SPRO>mm>LIV>Incoming Invoice>Maintain Default Values for Tax Codes
    hope it clears
    regards
    KI

  • Cut-Off Entries in Z-Condition table during Initial Download

    Hi there,
    I have implemented in our CRM 5.0 / Backend 4.70 a new condition type, access sequence and condition table that uses two Z-fields. The customizing download worked well. I also created an adapter object for the initial download of the condition records. But: When I download the condition records from the Backend to the CRM, the entries of one key-field of the condition table are shortend from "9010" (in the Backend 4.70) to only "9" in CRM!
    What can this be???
    Thanks in advance
    Ralph

    Finally found the error: In structure ZA0CND_MAPT_ACS_REM_CUST I did not refer to the correct key field that I use in the condition table on the R/3. I changed the ZA0CND_MAPT_ACS_REM_CUST, acivated it and then the initial download worked fine!

  • Condition class and calculation type missing for conditions downloaded from

    Hi All,
      I have downloaded all the condition types from R/3 using dnl custcndall
    I have even downloaded the following using r3as
    dnl_cust_cnd
    dnl_cust_prc
    dnl_cust_price
    But I have noticed that for the downloaded condition types, condition class and calculation types are missing. Please suggest.

    I have faced the same issue recently.
    The solution is in adapter object DNL_CUST_CNDALL for table T685 and other tables for T685 in that objet put the filters for condition type
    for ex: KSCHL eq PR00
    This sure will work.
    But you have to set this filter for all tables T685*
    Thanks
    Sarabjeet

  • Planning file entries missing for some materials in MD21.

    Hi gurus,
    when i check the MD21, i found that some materails are not having planning file entries i.e netch and netpl indicator .and because of this we found that these materials are not being in planning.
    From my understanding these planning file entries were updated when the material was created.
    I am not sure how these entries are missing. Please can any one help me find out the root cause for the same.
    Thanks in advance.
    Naveen.A

    Dear,
    Please note MRP has to be activated for plant level before creating materials in OMDU. Then only created materials will have planning file entries.
    You can run planning file entries consistency check in background before the MRP run to create/delete the planning file entreies automatically from MDRE/MDAB transactions...This will be useful to avoid the re-planning of the materials ( if planning file entry is not deleted after MRP run) and also to plan material (if planning file entry is not created).
    Regards,
    R.Brahmankar

  • Entry missing in the table

    Hi all,
          I am simply entering values in the table every 100ms.
    For first 10 mins the entries comes at constant speed i.e 10 values per sec. but after that the values starts decreasing,
    though slowly.every 10 mins the no of samples goes down by one.
    I have attached a vi, In it a table is given which is not connected to anything, In that i have generated the output.
    I think the loop execution time in increasing , can u help me in that?
    My only aim is that, to get reading in the table every 100ms exact.
    Regards,
    Shrek
    Solved!
    Go to Solution.
    Attachments:
    Untitled 3.vi ‏92 KB

    Hi shrek,
    2 points:
    1) at the moment you don't get values exactly every 100ms as the attachment shows (simply changed format for timestring)
    2) to maintain exact timing you shouldn't build big arrays as you do with your table! The bigger the table the more LabView has to copy from one memory block the the next...
    Message Edited by GerdW on 08-24-2009 03:27 PM
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome
    Attachments:
    Untitled 3.vi ‏92 KB

  • Outbound Connection Pool Entry Missing for DBAdapter in Clustered Weblogic Congfiguration

    Hi ,
    When I created an outbound connection pool entry in DBAdapter through weblogic console in a clustered environment ( 1-Admin server and 2-managed servers) and updated DB adapter, I indentified that connection entry is updated in only in plan.xml of one managed server and for other managed server it is not updated. Due to this we are unable to access Datasources for some requests from application.
    As a work around if we update plan.xml file of other managed server manually with required connection entry and update DB Adapter we are able to find the connection entry for both the managed servers.
    Apart from work around is there any other solution for this issue so that I can add a DB adapter connection entry through console which will update both plan.xml files.
    Thanks & Regards,
    Venkat

    I can suggest you to keep the Plan.xml file in shared drive that is accessible from all the server nodes,this will reduce the manual work.
    Regards
    Albin I
    http://www.albinsblog.com/

  • Entries missing in ERTPCOMPCODE Table

    Hi Experts,
    We have created RTP Components, but the entries are not showing up in Table ERTPCOMPCODE.
    Any help would be appreciated.

    Did you generate the components?
    Transaction EEDM_CMP03, then generate.
    Also after transporting you need to generate them in the system where you imported them to.

Maybe you are looking for