Entries not in table EBAN

Hello friends,
I have a unusual scenario . I am using a SELECT statement in a function module it gets backs 3 records for the LIFNR and EKORG . When I look into the table and use the same selection criteria it does not return any values . How can this be possible ?
Any thoughts about this .
Thanks,

HI Hari,
What entries you are giving for LIFNR. If lets say it is 35670 then just use 0000035670 and see what the result is.
Reward points if useful.
Regards,
Atish

Similar Messages

Workflow entry not in table SWD_HEADER

Hi Guys,
After transporting a Worflow from Dev to QA, I noticed that the workflow entry is not getting entered in the table SWD_HEADER. Would anyone know why this is happening and how to overcome this ?
Regards,
Satish

What is the status of the Transport Request. Have the transport being released properly?
Thanks
Arghadip

Entry not in table T059C

Hello Experts,
I am trying to use extended withholding tax. I get error message "entry IN J1 CO does not exist in T059C". what to do ?
Thanks
Balakiran

Hi,
In the following path maintain withholding tax type J1 and recipient type CO.
SPRO>>Financial Accounting (New)>>Financial Accounting Basic Settings (New)>>Withholding Tax>>Extended Withholding Tax>>Basic Settings>>Check Recipient Types.
Hope this helps.
Thanks and Regards,
Anit

Table entries not getting displayed in desired format

Hi All,
In my adobe layout I created a table . I used data format Align Right and align middle for the table entries. In the Output some entries of the table are not displaying in align right and align middle.
Output:In the below output the first row data is not in desired format .
Thanks in Advance,
Suneel.Uggina.

That is pretty to much information to help you.
You need to share your technical setting. How did you create the table? Subforms, Table-assistent... what are the values in? Format, what happens when you also pass more than 1 digit to the numbers in the first row, does it show up correct?
So please share more details and explain exact what you have tried to fix the issue. The community is able to help you, but not meant to suggest enaything you could have done.
~Florian

Getting idoc error - Entry in outbound table not found- in outbound scenari

hi,
while generating idoc for outbound idoc to file scenario - i am getting error
"Entry in outbound table not found" (29 - error in ALE service)
Diagnosis
No partner profile (outbound parameter) could be found using the following key:
/C100/KU//WP_EAN////
This refers to the key fields in table EDP13:
RCVPRN Partner number
RCVPRT Partner type
RCVPFC Partner function
MESTYP Logical message
MESTYP Message code
but already entry has been maintained in partner profiles for the corresponding message.
same setup is working for other message types. pls let me know what might be the problem

Hi,
Check whether partner name is correct or not in WE20/outbound parameters undoer Logical System.
Regards,
Sreenivas.

Custom Table Entry not in Sync between Different Environment

Hi All,
we have different environment like Dev System, Quality system, performance testing system etc... these are all environment customs table entry not in syn .. Table entry should be syn. How to make it syn all the entry between all environment without do any manual work. Kindly help on this.
Thanks

Hello Mohammed,
It depends on what type of tables you are referring to. If you have a table of type 'Customizing', you have to transport your table entries across different environments and they will be in Sync.
If you are referring to tables of type 'Master Data', they have to be maintained in all environments.
Table of type 'Transaction Data' by default have different records based on your day to day transactions.
You cannot have all custom tables with same data in all environments. Hope this helps.
Rgds,
Vijay.

Entry in outbound table not found

i am using we19 trying to do standard outbound processing for idoc mbgmcr02
i use receiver Port internal and partner abc01
         sender Port -
and partner abc02
in we20 is set up partner
abc01   type ls   in outbound parameter area i see mbgmcr
now in 19 when is use as receiver partner abc01 i get the following error
entry in outbound table not found
/abc01/ls//mbgmcr   message no 400   id E0
can anyone direct me to what i am doing wrong?????????????????/

Hi Janice,
See these..
http://help.sap.com/saphelp_erp2005vp/helpdata/en/71/9bbdde2f66454bb9771170369bae81/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/2d/f371e4d24a11d289810000e8216438/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/dc/6b80c243d711d1893e0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/f0/08ef0d06b111d286e2080009b98822/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm
cheers,
Prashanth

Entry in inbound table not found

There is a typical problem here. R3 is recieving IDOCs from other (SRM) systems.
But the sender's(SRM) partner name is not there in R3. The present IDOCs are getting failed with status 56 and message " Entry in inbound table not found" Please help me out..

Sending partner (number) is not there...so U cannot have partner profile..

Entry in outbound table not found, Error message no. EO400

I have created Partner profile and include message in partner profile. when i have generated IDOc (we60), that time, it is given error ( Entry in outbound table not found---- Error Msg no. EO400).
Please suggest me solution for the same.
Kunjan shah

Hi Kundan,
can u be more specifidc about ur requirement.So that i can help u out.What all the configs u have done and what is method ur using for generationg outbound idoc.
Regards,
nagaraj

Entry in outbound table not found E0 400

Hi all,
    Can anyone please help me with the below error which i am facing in ALE IDOCS.
status 29: Entry in outbound table not found E0 400
I am unable to see my port name in the created IDOC and the basic type is incorrectly called.
may I know what settings need to be verified.
Thanks in advance.

SAP checks the IDoc control record for outbound IDoc against EDP13 (outbound partner profile table). EDP13 is updated when you create outbound partner profile parameter in WE20
Check if you have created the partner profile outbound parameter in WE20 correctly to match your outbound IDoc control record.
SAP checks partner number, port, partner function of the receiver along with message type, message code and message function. They all should match between WE20 outbound partner profile parameter for your message type and the IDoc control record (EDIDC) segment.
This is the SAP code that throws the error message you mentioned
read table q_edidc index 1.
select single * from edp13
                  where rcvprn eq q_edidc-rcvprn
                  and   rcvprt eq q_edidc-rcvprt
                  and   rcvpfc eq q_edidc-rcvpfc
                  and   mestyp eq q_edidc-mestyp
                  and   mescod eq q_edidc-mescod
                  and   mesfct eq q_edidc-mesfct
                  and   test   eq q_edidc-test.
if sy-subrc ne 0.
    concatenate q_edidc-rcvprn '/' q_edidc-rcvprt '/' q_edidc-rcvpfc '/'
                q_edidc-mestyp '/' q_edidc-mescod '/' q_edidc-mesfct '/'
                q_edidc-test into text.
    condense text no-gaps.
    message a400(E0) with text(50).
endif.

Entry in outbound table not found in PFAC

Good day all.
I'm facing an error "Entry in outbound table not found" when I try to create assignment PFAC (Responsibility Rules).
Any body have an answer to solve this issue?

Are you trying to do something related to IDOC/Partner profile related responsibilities?.

Error : Entry 4 not in table EMSEG (system error) in MIGO

Hi All,
I am getting the below error while cancelling the material document in MIGO.
Error : Entry 4 not in table EMSEG (system error)
Please provide any information on the same issue.
Thanks & Regards,
Ashish Dholi

you can only know it after you have read, justified and implemented the notes.
That is your work, it cannot be made by anyone here.
In general, if OSS notes are supposed to fix program errors, then it will usually not harm to implement them, you will get it anyway with the next hotpackage.
if your issue is caused by a program error, then there is no workaround to applying a OSS note to get your issue fixed.

IDOC Error - Entry in outbound table not found - Status 37

Hello,
we try to generate the IDOC in a Test Tool WE19. I always get the same error "Entry in outbound table not found" - Status 37. I tried already many config changes (Partner, Ports, Distribution Modell...).
The thing is that the IDOC should be sent on external system (non-SAP System) but also the IDOC should be write to file. The external system should later on catch the IDOC and process the data.
I suppose the problem is the fact that we send it to external non-SAP System. I add as Port Data and the source where the IDOC shoud be generated. The Partner that I choose is logical system. However I dont specify the RFC Connection because the file should only be saved and not send directly on the external system. Is it possible or maybe I need to specify the IP-Adress of the external system?
When it works I need to generate the IDOC as service management IW32. I try it with TA IORD. I get the message "rejected". Probably because of the error in the test tool WE19.
I am already fighting on it for many hours...
Thank you in advance
Michael

Hi
In we 19
Receiver
Port: A port created in R/3 referencing RFC dest pointing to XI.
Partner no: LS of XI (CLNT100)
Partner Type: LS
Sender
Partner no: LS of R/3 (RD1CLNT500)
Partner Type: LS
Message Type is DESADV
Basic DELVRY05
and i am sending blank idoc for testing.
Regards
Monika

IDOC error : Entry in inbound table not found

Hello all...
Iam gettin IDCO error when im processing inbound IDOC
(basic type :FIDCCP02 and message type:FIDCC2) like..
<b>"Entry in inbound table not found..."</b>
<b>in diagnosis:
Noinbound partner profile could be found with the following key:
    /XXXHUB/LS/LS/FIDCC2//// ..</b>
but:
I maintianed XXXHUB in logical system ( tcodeSALE )    and
in WE20 i maaintianed the parner profile in partner type LS with partner number XXXHUB   and also added message type FIDCC2 with process code FID2 ...
what else need to do/configure?....
let me know if u need more info...thnaks..

Thanks guys...for your answers...
there was some problem with message variant i assigned in the inbound parameters of sending system( XXXHUB)in the partner profile..( we20)...now i removed it...it is working fine..
so what's the problem if I assign the message varaint.do i have to declare the message variant anywhere?....
one more thing...
iam receiving idoc from XXXHUB to my DEV client200...i want to make clear which parameters(inbound/outbound) i have to maintain in WE20
for sender : XXXHUB (parter type LS).... inbound or outbound? ( i maintained both)
for recipient :DEV200 ... inbound or outbound?(i maintained inbound)..
Thnaks....

Status 29: Error in ALE service : Entry in outbound table not found

IDoc: 0000000003560240 Status 29: Error in ALE service
Entry in outbound table not found
No partner profile (outbound parameter) could be found using the following key:
/0000000000/LS//YHROT_XXM_IN////
This refers to the key fields in table EDP13:
RCVPRN Partner number
RCVPRT Partner type
RCVPFC Partner function
MESTYP Logical message
MESTYP Message code
MESCOD Message function
TEST Test indicator
Procedure
Please check the EDI partner profiles.
But The IDOC befor this and after this is successfully run.
And even after reprocessing also it is giving same error.
After checking Contorl record, we found that there is no data in receipant Info in Partner Tab.
What would be the issue.
Please suggest.
Thanks & Regards,
Monika

Hi ,
Thanks for your reply.
We are using one custom message type.
I would like to give you example of exact scenario.
Suppose my IDOC has large amount of segments then ,
It is dividing as
1st IDOC : Control record ....header and data segments
2nd IDOC : only data segment
3rd IDOc : only data segment
4th IDOC : data segment and Trailer.
In this way, I am getting all my 4 IDOCs in error.
What should be d reason?
your help will be grateful.
Hi Everyone,
any update?
Edited by: Monika.Dhumal on Feb 14, 2012 11:49 AM

Entries not in table EBAN

Similar Messages

Maybe you are looking for