Entries on non-leading ledger do not appear in BSEG

Dear experts,
We are running on ECC6 with the parallel ledger option (i.e one leading ledger and one non-leading ledger). When posting directly to the non-leading ledger, table FAGLFLEXA and BKPF are populated but not the table BSEG.
Is there an explanation ? Is it normal ? If not can it be corrected ?
Thank you.
Best Regards,
Steven

Did you scroll further down "Not In Notification Center" and see if it's there?

Similar Messages

Posting entry into non leading ledger for already closed books

Hi
We have two ledgers - Leading (as per IGAAP) and Non Leading (IFRS)
Now there is Rs. 54Lacs expenses which are pertaining to March 2010. This expenses are being booked in October 2010
Now as per IFRS, i need to re-instate this amount in March 2010
So i want to pass this entry for IFRS ledger only in fiscal year which is already closed and carry forward
So what should i do now?
Should i open the posting period for March 2010 (last closed fiscal year). Is it possible ?
If i open and post the entries, do i need to carry forward the balances again for IFRS Ledger ?

Hi Meenu,
You need to open the posting period 3 of 2010 and post entry only in the non Leading ledger of IFRS. When you post entry it will automatically be reflected in the current year.
Secondly, the carry forward transaction does no harm even if you run it again..
Regards,
SAPFICO

Cost center not updated when posting in non leading ledger

Hello FI Experts
I have two ledgers - Leading and Non Leading Ledger.
When I posted expense entry it updated both the ledgers and updated cost center value. This updated value i checked in cost center report KSB1.
For Ex: Rs. 1,00,000
Now I posted another expense entry in non leading ledger only. For Ex: Rs.50,000
How ever this entry didn't updated cost center report value. I checked in report KSB1
So I want to know:
1. Are there any cost center reports / profit center reports in controlling module where I can get non leading ledger specific amount in cost centers and profit centers
2. Is it possible to run assesment and distribution cycle, cost reposting and other CO transactions for non leading ledger amount
Deepak

Hi Deepak.
You can verify is the cost center was posted on document running tcode SE16N on the FALGFLEXA table, put the document number to do research.
After you can trying to post the new document through Tcode FB50L choosing or not a legder specific, then verify the document was posted correctly running the Tcodes SKb1 or Se16N with FAGLFLEXA table again.
Also you can check this link Checking the Allocation of General Ledgers to Cost Centres
Kind Regards
Jandoval Nascimento

Non-Leading Ledger and SPL

Hi,
<u>Question 1:</u> Can anyone verify that posting to non-leading ledger do not update SPL?
<u>Question 2:</u> If this is the case, does anyone know if this is going to change in the near future?
Thanking you in advance,
Pavlos

Thanks for the reply. I neglected to say that I had already done ASKB. That did not solve the problem. However, we did discover the problem. We had an error with cross-system depreciation on the non-leading ledger depreciation area. Used OADB and removed and the problem was solved.
Thanks again.

Automatic AP/ AR posting with different amount in Non-Leading Ledger

Dear All,
We have leading ledger for local GAAP and Non leading for IFRS. Is there any configuration/ mechanism to post a AP/ AR document with relevant amount in the Non-Leading Ledger based on the a/cing standards described by relevant standard.
I am aware of autoamtion in posting the documents of depreciation, foreign currency valuation, accrual/ deferrals. I want to know settings for automating the entry in non-leading ledger based on the standard.
Thanks,
Amish.

Hi,
If you want to post additional amounts ,adjustments, modifcations to non leading ledgers you can use FB01L and give your non leading ledger while posting. System post documents only in Non leading ledger.

FC valuation not getting posted to non-leading ledger

Hi Gurus,
I need your help to resolve the following issue. We have a company code with 1st LC as EUR and 2nd LC as USD which is group currency. We have valuation area V1 assigned to the ledger group that has set-up for postings to both leadine (0L) and non-leading ledger (Z1). When I am trying to run FC valuation using transaction FAGL_FC_VAL, the valuation document gets posted to leading ledger only. There is no posting to non-leading ledger. The other ledger tab is missing in the GL view of the document confirming that the posting happened in the leading ledger only.
I have gone over lot of threads in the forum but could not figure out the issue. I would really appreciate if someone can guide me to resolve this issue.
Thanks,
Shalu

Hi Shankar
Thanks for your reply. Yes, the non-leading ledger is active and has been assigned properly to the ledger group. The set-up is working fine for all company codes except one company code. In our set-up, for all company codes, we are using a valuation area V1 with always evaluate as valuation menthod and CC curency as currency type and Group currency as additional currency. We were having some valuation issues with one company code with existing set-up as Local currency 1 was different from LC2. In order to fix that issue, I created new valuation area V3 with same valuation method and currency type but no additional currency. The ledger group and assignemnts were same. The original issue with curency valuation got resolved but the new issue appeared that the posting is happening only in the leading ledger and nothing for this company code is getting posted to non-leading ledger while running transaction FAGL_FC_VAL.
If I manually force the currency in F-02 in this company code, the posting does happen to the non-leading ledger. The issue is with automatic postings only using area V3.
Please help.
Thanks,
Shalu

How to post a acquisition entry in Dep area 30 (for Non Leading ledger)

How to post a acquisition entry in Dep area 30 (for Non Leading ledger N1)
In our scenario, following configuring is being set up:
1 Book depreciation IAS/IFRS 1 0L
30 LOCAL 3 N1
51 Property Tax 0
60 DELTA 6 N1

Hi Saurabh,
Create a new custom transaction type by coping existing TTYPE 100 and restrict the transaction type which allow posting for dep.area 30 and do posting in FB01L by selecting ledger group.
Regards,
Mukthar

Ledger Group field NOT showing in FB03 after activating Non- Leading ledger

Dear All Experts,
I have activated non leading ledger for my company code and posted the document successfully from FB60. Now coming to FB03 I can see the document in Local Currency and Group Currency - USD but the Ledger Group field still shows complete blank. As I guess it MUST show 1F ( Non Leadig Ledger ) which is my non leading ledger.
Where I missed the configurtation step ? If anybody has gone through the same issue please guide or provide some inputs.
Regards,
Revati Joshi.

Non-leading ledger use t codes FB01L and FB50L
The reason that the Ledger Group 0L is being used it´s because the Accouting Principle of your Valuation Area.
What you have to do is you need to create a new Ledger Group and assgn it to your valutaion area.
Then you assign this accounting principle to the valution area.
Then assign the accounting principle to no Ledger Group.
Please see the customizing path:
Define new Ledger Group:
Financial Accounting (New)>Financial Accounting Global Settings (New)>Ledgers>Ledger>Define Ledgers for General Ledger Accounting (dont active your new ledger as leading ledger. leave the standard as the leading )
Assign Accounting Principle to none New Gl Group:
Financial Accounting (New)>General Ledger Accounting (New)>Periodic Processing>Valuate>Check Assignment of Accounting Principle to Ledger Group
Assign your Valuation Area to the accounting principel just assigned to none NewGL Group:
Financial Accounting (New)>General Ledger Accounting (New)>Periodic Processing>Valuate>Assign Valuation Areas and Accounting Principles
Now you have more then one Ledger Group in you client (which is not being used for nothing) and you have a valuation area that is linked to a Accounting Principle that is linked to no Ledger Group.
Go ahead now and execute the FAGLF101. You will see that the standard will not try to inform leading ledger in the Group of Ledger.
I found this solutiong debbuging the standard. Took me quite a bit to discover.
The problem was in SPRO->Financial Accounting(New)->General Ledger Accounting(New)->Periodic Processing->Valuate->Check Assignment of Accounting Principle to Ledger Group. In "Target Ledger Group" field, the ledger "0L" were configured in BRAP and GAAP. So, the system automatically assigned the ledger "0L" when performing FAGLF101.

Depriciation Not Posted in Non Leading Ledger

Dear All,
I run the depriciation using AFAB. Now Depriciation is posted and it is displayed in leading ledger when I execute report using FAGLL03 for that particular depriciation ledger. but after selection of non leading ledger in FAGLL03 for that same depriciation ledger transaction were not displayed.
what configuration steps are missing, please guide me.
Thanks & Regards,
Mahendra Gupta

Hi
go to bellow link
http://www.sapficoconsultant.com/SAP%20New%20GL%20configuration.pdf
Thanks,
Raviteja

Leading and non leading ledger balances do not match in FAGLB03

Hi,
Balance for period 5 as per FAGLB03 for leading ledger (0L) is say $104.
The same balance as per nonleading ledger is $176.
I checked in FAGLF03 and no difference exists there.
The issue is only with period 5, the other periods display the balance right.
There is some balance from period 6 that adds up in the credit line items balance and thats the reason for difference.
Please suggest.
Regards,
Soujanya.

Hi all,
Any ideas please??
In other words from my previous posts:
1. Earlier this year (around February) the non leading ledger's (Fiscal Year Variant - K4) was changed in accordance to leading ledger's FYV - YY which is April to March (year dependent).
2. So, the periods in FAGLB03 are divided based on calender months for non leading ledger (X1).
3. As the periods in leading ledger(0L) are year dependent the open and close dates are different than the calender months.
4. That's how calender month(or old K4's fiscal period of X1) August, has 2 0L's fiscal periods i.e. 5 and 6 (5th period closing date was 27.08.2011) and the 6th period start date is 28.08.2011
5. For X1 - non leading ledger when I drill down on the balance of 8th calender month i.e. August , it shows some balance from period 6, where it should not. It should only give us the results of period 5.
6. The results were right for periods 2, 3 and 4 in accordance to 0L's year dependent results. Wondering what went wrong in period 5.
As this is a month end closing issue, would appreciate any clues fast.
Regards,
Soujanya.

Profti Center Determination for Non Leading Ledger

Hi,
We are on ECC6, EHP4. We have activated non leadgin ledger and I am facing issue in asset accounting transaction type for Write up, I have created for Non leading ledger (IFRS) . Following is the issue.
I have created the transaction type "Z71" and attached it to the "IFRS " depreication area. Whenever I post the write up entry and process it from "ASKB" with transaction type "Z71"I get the error "Balancing Field Profit Center in line item 001 not filled." Whenever I use transaction type which posts to both the ledger, entry gets posted correctly without any error.
What could be the issue, am I missing sometihing in configuration?
Please advise
Regards
Shailesh

Dear shilesh,
were you maintain profit center in Define document splitting characteristics for general leadger account
Pls reply me
Thanks & Regards
shankar

Document splitting with non leading ledger activation

Hi experts,
Thanks for your advance help. we have activated document splitting in my company code pofit center is deriving proprly. for below entry.
1 31       503402     Vinayaka International Ltd.     4100     3,000.00-     0.00
2 40       53080043     ELECT.CHRGS-NON PLT     4100     2,000.00     0.00 4206
3 40       53080043     ELECT.CHRGS-NON PLT     4100     1,000.00     0.00 4207
system is deriving profit center like below.
000001 31 16011002     SUNDRY CREDITORS     2,000.00-     INR   4207
000002 40   53080019     BAD DEBTS WRITTEN OF     1,000.00     INR   4207
000003 40   53080043     ELECT.CHRGS-NON PLT     1,000.00     INR   4206
000004 50   19910001     INTER BRCH/DIVN A/C     1,000.00-     INR   4206
000005 40   19910001     INTER BRCH/DIVN A/C     1,000.00     INR   4207
in the same way i have activated document splitting in another company code with non leading ledger activation. and posting same transation
1 31       503402     Vinayaka International Ltd.     4100     3,000.00-     0.00
2 40       53080043     ELECT.CHRGS-NON PLT     4100     2,000.00     0.00 4206
3 40       53080043     ELECT.CHRGS-NON PLT     4100     1,000.00     0.00 4207
system is not deriving pofit center and it is giving the below error.
Balancing field "Profit Center" in line item 001 not filled
please advise any configration i have missed out.
any quaries please please let me know.
Regards

Hi Venkat,
Even in the first transaction, the profit center has not been determined by document splitting
if the profit center was derived by document splitting we would have seen 2 items for sundry creditors in the GL view
So check your document splitting settings for the corresponding document type, and transaction variant
the account category which includes vendor's recon accounts should be included in "item categories to be edited" list
Regards
Sach!n

Profir center determination in non leading ledger in tcode ABAA

Hello experts,
We are working on ECC6.0 and parallel ledger is already activiated. To post the unplanned depreciation only in the non leading ledger, I have created new transaction type and attched it to non leading dpereciation area. After entring through transaction code ABAA, when I run ASKB to post the entry in the financial books, I get the profit cetner determination error. Entry is as under:
Depreciation A/c ..........Dr
To Accumualted Depreciation Account.
Now for depreication account being expense account and having cost element system is asking for the profit center (cost center).
My question is, how can I guide the system to determine the profit center from cost center mentioned in asset master data?
Please advise.
Shailesh

Dear sir,
Please check your seetings in T.code ACSET. Whether KOSTL as a account assignment object defined or not. If not then please make the entry, by doing so system will check the cost center in asset master and will pick the profit center maintained accordingly.
As well check account assignment type as a 02 Depreciation Run
I hope this may help and solve the issue.
Regards,
Pankaj A Bhalerao.

Post SKF only to New GL -Non leading ledger

Hi New GL experts,
We have an issue with SKF ( Statistical key figures) in New GL.
The below 2 options are considered:
1. Entry from KP46 ( CO Module) - Flowing to Leading and Non leading ledger. But the period is wrongly derived in Non leading ledger.
2. Entry from FAGLSKF1 ( New GL) - Posts to both Leading / Non leading ledger ( with correct periods) - But does not flow to Controlling.
Is there any way to post the SKF to Non leading ledger only ? or to CO module only without updating to Leading / Non leading ledger ?
Thanks in advance for your help.
Siva

Hi Siva
Option 1 - If you deactivate the "Integrated Planning" in CO Version 0 OKEQ and also in GL Planning, the Plan data in CO wont auto update to New GL at all..
You need to then manually push the plan data into New GL using a special T code.. You can find the T code in the SPRO where you set up GL planning
Option 2
FAGLSKF1 does not update controlling, as designed.. So, maintain your SKFs independently in FI and CO
Option 3
Try to raise it to SAP if the period in Non Leading Ledger is wrong.. Ideally, the period you enter in KP46 should convert to the Non Leading Ledger period as per the Fiscal yr variant of Non leading Ledger
Br, Ajay M

Difference in ABST2 in non leading ledger for 2nd LC AA and 2nd LC GL

Hi,
While executing ABST2 there is difference in our non leading ledger ,we have recently created new dep. area 33 which updates the values in 2nd LC AA for non leading ledger but value in 2nd LC GL is different from what we have in Asset for non leading ledger Z1 .
When we check in FAGLL03 for Z1 ledger we came to know that Asset balance is updated from Local currency and GL values are updated from 2nd Local currency ,but in 2nd Local currency system has not post any entry and due to this there is difference.
We want the same value in non leading ledger Z1 for 2nd LC AA and 2nd LC GL.
Please let me know if there is any specefic settings required for the same.
We have mantain dep area 34 also as per SAP Note 1433535 but still there is difference in ABST2.
Thanks
Akshata

Hello Akshata,
If you want to setup a scenario in Fixed Asset Accounting, where
you post different valuations (local GAAP / IFRS) to a different ledger
group in G/L for parallel valuation, then you have to use (in total) 3
depreciation areas in the following way. For each additional "valuation"
for which you have additional ledgers defined in G/L, and for which you
want to get different values as those posted in area 01, you need also
two additional depreciation areas (1 real and and 1 derived area) in
asset accounting.
Please consider a correct definition of a parallel ledger scenario
is as follow: this is an example only
                           Posting to G/L         Ledger
Area 01 HGB                        1                   0L    > STATUTORY
Area XX IAS                          3                   LG    > (IAS)
Area YY (IAS - HGB)             5 or 6              LG    > (IAS)
Acquisition/transf/retirement postings in area 01 go to all ledgers
independently of your setting in OADB. And, if any difference occurs
between area 01 an area XX this is posted trough the derived area YY
(posting indicator 6).
This is the parallel ledger scenario logic and how the techinal
solution to this requirement was developped.
You can find more documentation about the so-called "Ledger Scenario" in
Asset Accounting for the purpose of parallel valuation in the SAP Help
Portal. You may find these links helpful:
a) Parallel Accounting in Asset Accounting
http://help.sap.com/erp2005_ehp_04/helpdata/EN/91/09f5400e517e7fe1000000
0a1550b0/content.htm
b) Parallel Valuation
http://help.sap.com/saphelp_erp60_sp/helpdata/en/4f/71ea61448011d189f000
00e81ddfac/content.htm
c) Making Settings for Parallel Ledgers in FI-AA
     > this one documents my above explanation
http://help.sap.com/erp2005_ehp_04/helpdata/EN/0d/de3d83c78b48a28a44ad92
14239d57/content.htm
d) Example: Parallel Accounting and the Derived Depreciation Area
     > this one describes how the derived area acts in the scenario
http://help.sap.com/erp2005_ehp_04/helpdata/EN/37/ebad814b3347e9bc5182c0
56d5bbd8/content.htm
kind regards
Ray

Entries on non-leading ledger do not appear in BSEG

Similar Messages

Maybe you are looking for