Entries Should come by default in XD01

Hi Gurus...
Can we do the setting like when we will create the Customer in XD01 some entries should come by default for the Fields in XD01 like Reconcillation A/c # 6458321, Payment term field- Check, Sort Key # 006 & Cash management Group # Z9.
Please give me the solution....
Thanks in Advance
I will really Appreciate....
Thanks
Amol Gawai

Thanks Sai....
This requirement is for only specific sales area & for other sales area there is no default entries.
The situation is we have more than one company codes & sales org. , Distrubtion channel & Division
I want the default entries only for one Sales Area.and for other Areas & Company codes it should be normal means no default Entries.
Will it be possible with this Tcode-SHDO ?
Again Thanks
For Correct Solution , I Will definately rewards the points
Thanks
Amol Gawai

Similar Messages

In Table Maintaince G/L Text should come by default with G/L Acc.--Ple

Hi Guruu2019s
I created Ztable with 3 fields G/L Acc, G/L Acc text and another Zfield.
I created a TABLE MAINTAINCE for this. Here we need, after entering the G/L A/C in table maintaince-- G/L Text should come by default. Please suggest a way do these.

Hi,
You need to write the code in the EVENTS. these are avilable in the table maintanence. you can use event 05(create), here give the Perform name and click on the code button there you can write the logic to bring the short text and move that text to your Ztable field.
look at the link to create the events --> /people/sudheer.junnuthula2/blog/2007/07/31/events-in-table-maintenance-generator
Thanks
Sudheer

Interdivision entry should come automatically in SAP

Hi Gurus,
We have four business areas under one company code 1000 . Since the bank limits are merged and common , realisation from customers and payment to vendors are received or paid from bank accounts of Business area 6100.
The team of Accounts at head office passes entries in Business Area 6100 since payment is received or payment is made from bank accounts of head office. They pass entry through inter division , if realisation from customer or payment to vendor pertains to other business areas.
Since , this is mirror accunting , these converse entries in other business areas should be passed through system autmatically.
Pl advise how i can cofigure it.
Regards,
Samar

Hi,
If you have a strong business case for New GL, then go ahead, else I would suggest you continue with what you are doing.
The business area issue can be resolved by periodically executing the business area adjustment run, which will balance out the business areas. This is a periodic activity, so do not expect online reporting. Whenever, there is a need to execute business area balance sheets for reporting/audit purposes, execute the run.
You do this from here:
Subsequent Business Area Adjustment u2013 Calculate
Accounting -> Financial accounting -> General ledger -> Periodic processing -> Closing -> Reclassify -> Balance Sheet Readjustment -> Calculate F.5D
Subsequent Business Area Adjustment u2013 Post
Accounting -> Financial accounting -> General ledger -> Periodic processing -> Closing -> Reclassify -> Balance Sheet Readjustment -> Post F.5E
cheers.

Housebank field should come as default in invoice by substitution

Dear Gurus,
I want to make the house bank field to be defaulted at Invoice. I am trying with substitution. But I am not able to get the housebank field as the substitutable field.
Anybody can help me out in this issue. I am able to get the account ID as substitutable field where I select the call point as 2 (Line item). But I am not able to get the house bank field.
Thanks in advance.
Regards,
venkata Reddy.Mudda

Hey Yoav,
I thought that was not your question
Anyway, how things are going in Edge?
Regards,
Eli

Billing type should pickup by default while doing the Stock transfer invoic

Dear Guru's,
For stock transfer Process when I am creating billing with reference to delivery Billing type ZF2 do not come by default. where I need to do the setting for this.
System through the error saying that: 100000245 000000 Delivery type ZNL cannot be invoiced with billing type F2 if i have select the invoice type ZF@ manually it is coming. i want the ZF2 invoice type should come by default.
Regards,
Pratap

In your delivery type config ZNL, check which Order type is mentioned in the field 'Default Order type'. If you copied from standard, it should be DL.
But whatever order type it is, then goto VOV8 for that order type and make the Delivery related Billing type and Intercompany Billing type as ZF2. Then it will come as default.
Hope this helps

A new Snapshot should come with a default name.

When you create a snapshot, it should have a default name already typed in (highlighted for over-typing - of course). It would be nice if the snapshot carried the same name as the latest "History" entry, for example.
-Joe

Is this another Mac/PC disparity for LR?
Don
Don Ricklin, MacBook 1.83Ghz Duo 2 Core running 10.4.8 & Win XP, Pentax *ist D
http://donricklin.blogspot.com/

Quotation screen by default tab "Sales" should come

Dear Experts,
In transaction VA21 ( Quotation) by default in main screen tab item overview is coming but i want first tab SALES should come as by default like normal sales order
how can i achieve this ???
Thanks

Hi Hanumant,
When you go to VA01 --> Enter your QT and sales area --> dont press simple "Enter" --> Press "Sales" Tab
It will directly take you on Sales Tab.
Regards,
MT

In recrutiment in letters default data and time should come

Dear Group
Here i am have a problem that my client whats interview date and time should be disployed in letters.
But for this i want to enhance 2 fields in costome infotype but the abapr is saying that this cannot be done .because these r not appearing in pb50and pb60.so kindly tell me any way so how can i get the date and time displayed

see in so10 we have maintained letters but in interview invitation letter interview date and time should come.so for this we r maintaing in custom infotye9xxx so it has to pick that time and date from this infotye and it should display in this letter .

Calendar Entries change to Device Default rather than associated e-mail address when upgraded

Hi,
I upgraded my Curve 8330 software to the latest. Once this was done, I noticed my calendar entries are now showing Device Default in the Send To field. When I try to sync with my Outlook Calendar (2007), it won't sync these particular entries. In actual fact, the same entries that are in my calendar (that were sync'd prior to upgrade) contain many of the entries that were associated with the e-mail address. So, I got duplicate entries on my device.
I tried going the route of doing a 1 way sync from my device to Outlook, but it, it wasn't recognizing the Device Default entries. And I can't go the route of a 1 way sync from Outlook to my Device since I have since made many changes on my device.
What can I do to get the Device Default calendar entries to sync (even 1 way sync) to my Outlook calendar? I have hundreds of entries and I don't want to have to redo all of this each time I upgrade. (Not even sure why my calendar entries flipped like this on my Curve to give me this problem in the first place).

Hi and welcome to the forums!
1. Take a look at options-advanced options-default services. The CICAL (calendar) and CMIME (messaging) should the email address originally associated with your BB.
2. Entries in the device default will not sync with Outlook.
3. Read this KB article paying particular attention to Cause 3. http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB16063&sliceId=SAL_Pub...
Post back with any questons.
IrwinII
Please remember to "Accept as Solution" the post which solved your thread. If I or someone else have helped you, please tell us you "Like" what we had to say at the bottom right of the post.

Payment Terms should come from vendor master data

When we create a new contract (ME31K) Z0NQ for the vendor XYZ by default the payment terms that the contract retrieve is 1131, but in master data (XK03) for vendor XYZ I have payment terms 1011 defined.
I already checked it in Purchase organization and CCode level.
Please advise. Thanks!

It should come from vendor master only butmake sure that you are creating cintract based onthe RFQ or some use exit is avtive for that.

Vendor debit balance should come in sundry debtor balance

Hi, Gurus
My problem is that my client wants that if a vendor has debit balance than it should be treated as sundry debtor (Current Asset) and balance should come in sundry debtor reco. GL, similarly if a Customer has credit balance than it should be treated as sundry creditor (Current liability) and it should come in to sundry creditor balance.SAP provides overall debit/credit balance of Reco. Gl, my requirement is per vendor/customer wise i,e if Mr. X is a vendor and he has credit balance of say Rs.1000/- than its ok but another vendor say Mr. Y has debit balance of Rs. 7000/- than it should come in sundry debtor GL, what SAP is doing it will show debit balance in sundry creditor Reco. GL.
Please help me and provide appropriate solution.
Thanks & Regards
Anuraj

Hi ,
you need to perform closing operations for Accounts Recievable /Payable to achieve your client requirement.
Please read below SAP help.
Customers in Credit and Vendors in Debit
A credit balance on a customer account should be displayed as a payable; conversely, a debit balance on a vendor account should be displayed as a receivable. If such a situation arises, the program makes the appropriate adjustment postings automatically.
To do this, the system determines the total for each account and reconciliation account. This guarantees that special G/L transactions, for example down payments and bills of exchange are displayed separately from the payables and receivables. Accounts with the same consolidation company ID are considered together.
The receivables account in the figure above identifies a credit balance of $2000 for Customer 3. This payable is to be displayed in the balance sheet under the item "Other payables". You therefore transfer the amount to the account of that name. The receivables account is adjusted by a posting to the adjustment account.
Prerequisites
Since you cannot post to the reconciliation accounts directly, the system makes adjustment postings for you. You should display the reconciliation account and the adjustment account under the same balance sheet item. The system posts the offsetting entry to a G/L account, under which the payable (or receivable) is now displayed in the balance sheet. You must have defined the account numbers for the adjustment accounts and the accounts for the offsetting entries in the system already. The posting keys are already defined in the standard system.
To define the account numbers, select the activity Define adjustment acts for reclassifying payabl./receivables in the Accounts Receivable and Accounts Payable Implementation Guide.
Regards,
Lakshmu

I have the current Mac Pro the entry level with the default specification and i feel some slow performance when applying after effects on my videos using final cut pro and also rendering a video takes long time ? what upgrades do you guys suggest?

i have the current Mac Pro the entry level with the default configuration and i feel lack of performance when applying after effects on my videos using final cut pro and also rendering a video takes long time ? what upgrades do you guys suggest i could do on my Mac Pro ?

256GB SSD it shipped with will run low and one of the things to watch.
Default memory is 12GB also something to think about.
D500 and FCP-X 10.1+
http://macperformanceguide.com/index_topics.html#MacPro2013Performance
Five models of 2013 Mac Pro running Resolve, FCPX, After Effects, Photoshop, and Aperture

Purchase Org, Company code bydefault should come

Hi Friends,
Here the client wants the company code and purchasing Organisation should be bydefault at the time of PO/PR creation stage. Here we have 4 company codes and 4 purchasing organisations available in the server. For a specific company code, the users demand that for them their Company code and Purchasing Organization should come as bydefault when they create PO or PR.
Please advice how to do the settings so that the users should not select these 2 fields at the time of PO/PR creation.
Thanks & Regards
Satya

Hello Satyabrata,
In ME21n/ME51n goto Personal settings tab in that choose Default Values where we can enter CoCode, Purch.Org, & Purch group & save it.
So whenever PO or PR is created the default values will be what we entered in the personal settings.
I think this will be helpful if so pls reward.
Rgds,
Bala.

Forwarding Agent should come automatically in Sales order

Hi Experts,
My user's requirement is Forwarding agent should come automatically in Sales order at partners tab.
Can you please suggest what configuration do ineed to do,
To get this Forwarding agent automatically in sales order level.
Regards,
Sunina

Hi Sunaina,
create a vendor with XK01 with the required Forwardng Agent. At the time of creating customer master record assing this FA. Now at the time of sales order creation this FA is defaulted automatically.
Incase you have multiple FA's then also you assign all of them to customer master partner tab with partner function FA.
During sales it will give you a pop up to select the required FA.
Make sure that partner function FA (or incase if you have created a new also) this is assigned to the account group of customer master you are using.
I hope this answers your query.
regards
sadhu kishore

Does User Messaging Service come by default in SOA Suite?

Does User Messaging Service come by default in SOA Suite?

Yes, UMS is a feature available as part of SOA suite installation.
You should be able to see the UMS related configuration features in the EM Console.
Please visit the following link for more information.
Configuring Oracle User Messaging Service
Thanks,
Wajid
Middleware Integration - YouTube

Entries Should come by default in XD01

Similar Messages

Maybe you are looking for