Entry date not proper in adhoc query

Hi,
Entry date field in action infotype ( in the adhoc query) always returns 00.00.0000. Whereas the standard reports brings the entry date properly (This is from prelq.hiredate). How we can bring the values into this particular field.The feature 'ENTRY' returns DATYP but data is not maintained in IT41. System should bring the hiring action date (0000 start date) as the entry date. We want to use this entry date field in the adhoc query.
Thanks in advance.
Sreeja

Hi Sreeja
Please read the following paragraph of the consulting note 508026 :
"Exception:
If the query is started with a key date selection, the query calls
function module HR_LEAVING_DATE with the key date and not with the start
and end date of the personnel action in which the key date exists. You
can use modification note 562031 to change this system response."
Please also make sure, that the corrections of note 561514 are contained in your system.
I hope that this information be useful for you.
Regards,
Jun

Similar Messages

Text (T) symbol for field kostl not found in adhoc query selection

Dear Freinds,
We have developed a custom infotype , as per our requirement one of the field i have added is the Kostl field ( this i have created exactly the same way in infotype 0001).
I have to devlop a report using ADHOC Query based on this custom infotype , so i have developed a adhoc report ( selecting the logical database PNPCE option as it is not allowing for PNP), when i selecting the required feilds from the Custom infotype i can see for the field KOSTL field doesnt have the symbol(T) against the field . However for another ADHOC report when i am selecting from the infotype 0001 i can see the T symbol for the KOSTL . So i went and check in the custom type structur and transparent table as well , the search help etc is exactly same as that of the which are there for this field in the standard infotype 0001(Kostl). Because i have to display the description of the cost centre along with the kostl field , howeve iam able to get for Pernr descirption , for pernr iam able to see the T symbol against the field Pernr.
Please could any one guide why this field doesnt have the symbol T.
regards
divya.

Why don't you the same data element of the KOSTL.
Eventhough you created your own infotype you can still use the stanadard data element.
If you use the standard datatype you will get those feature avalable
Warm Regards

Credit memo related Data not reflected in BCT Query

Hi Experts ,
If anyone can help me .
Problem : I have loaded data in 0SD_C03 for sales analysis. Everything is alright and all data except Credit Memo related data are showing . During the selection in query the C/D posting + Doc Categ + Net Value forms the output value for Credit memo but it is not showing . The SD doc categ has credit memo records in VBFA table . Now i don't understand why data related to Credit memo is not retrieved in the query . I am using the standard queries and std BCT objects only .If anyone have come across please share your experience .
Theba

Check in your Cube fact table whether you have entries with document category O - for credit memo
If not, ensure cube has the data and your query do not have any exclusion filter dor document category O. Check in PSA also, if not there your extractor is excluding the credit memo records

Data not getting displayed in query

Hi
I have master infoobject with keyfigure units as percentage, and data is loaded and working fine.
data is not getting displayed in query, i am getting the error message, that exception aggregation has to be maintained for 0calday.
how do i resolve the issue
Regards

solved

Service entry without an entry date/not linked to goods receipt/invoice?

Dear Gurus,
I created a service entry against line 10 of PO. When viewing the service entryu2019s u201CAccept. Datau201D tab, there is a document date and a posting date.
When viewing the u201CHistory tab,u201D the created dated is 01/12/11...
When viewing the POu2019s u201CPurchase Order Historyu201D tab, the Service Entry does not have an entry date Additionally, when I go to the u201CGR/IR Assgtu201D view, the service entry is at the very top of the view But the goods receipt and invoice processing document are at the bottom, grouped together, but without the service entry.
Please help as why is it happeing like this?

Dear Gurus,
I m creating service PO and later on doing service entry sheet w.r.t the PO...in service entry sheet, i m entring entry date, posting date and all other relevant informations...and saving the SES and later on releasing it...
after this, I am going to PO history tab, there i m seeing the SES number but entry date field is missing...
May i know the reason?
Pls help...

No records for 2LIS_04_P_COMP, posting date & entry date not in same month

Hi All,
I m unable to get records in rsa3 for my DS 2LIS_04_P_COMP if my entry date and posting date of production order is not same or not in same month.
Please suggest.
Niraj

Hi,
It depends up on your Delta relevant field either it is Changed on or Time Stamp. What is ur delta field?
Regards,
Suman

Data not available in BEx query

Dear All,
I have loaded data and it was showing proper data. Queries are based on MultiProvider.
But now data is showing in MultiProvider but not in BEx queries. I have deleted all the data and re loaded but not working.
Plz help ASAP.
Regards,
SS

Yes and filters are working fine.
When i debugged the issue, i found that this is becaus eof Nav attributes. If i am removing Nav attributes from the query it is working fine.
Strangely, the same attributes are switched on in another MultiProvider and queries from that MultiProvider is working fine.
Plz help ASAP.

Remote system monitoring entry- data not relayed to Central system

Hello Folks,
I am trying to establish a central monitoring system for our client. I am trying to test it in the DEV environment first.
The central system is a Solution manager system (Dual stack- ABAPJAVA). I am trying to bring in monitoring data from the ECC development environment (ABAPJAVA).
First of, i created to RFC connections in Solution manager system, one for data collection and the other for analysis. I have maintained the host address of the ECC system as target.
Then i have created a remote system entry in Transaction RZ21--> technical infrastructure entered the 2 RFC names and have executed the function.
At this point i am only trying to bring in ABAP stack monitoring data form the ECC system so i have not generated the CSNCONF file.
Now when i look in Solution manager RZ20-->CCMS monitoring templates, i can't see any data for the the ECC system.
I guess i am doing something wrong. Am i looking in the wrong monitor set?
As additional information: Solution manager (SMD) and ECC (ECD) use different transport domains / transport groups. I dont know if this makes a difference.
Can some one please help.
Regards,
Prashant

Hi Prashant,
if I understand correctly your system shows only MTEs from R/3 Stack, not from the OS side, pls check your SAPOSCOL. Are the data in OS06 in your remote system correct and do you see the current data, refredhed all 10 seconds?
To check your environment, pls do the following:
in th efirst step check in RZ21 > in the Topology part the System Overview for your system connection to your back end system. Are the Read Destination Data RFC and the Destination Analysis RFC correct and works the authority chek fine?
In the second step pls check in RZ21 > in the Agents for Remotey SAP Systems part; are there registered your remote ccms agents correctly and works the connection test.
Stop the agents and in your RZ20 monitor pls enter STAT in your command field. Are there displayed for your MTE nodes the read RFC destinations?
Start the agents and and in your RZ20 monitor pls enter STAT in your command field. Are there displayed for your MTE nodes the CCMS Agent RFC destinations?
To rebuild the Monitor in the CEN system you could try to reset the node of your remote system in the warm up status > go in the remote system to RZ1 > go to local segments > change to edit > select your segments > reset segment in "WARMUP" status.
In the CEN system you coul try to go to the edit mode for the Agents for Remot SAP Systems > select your remote system and push the button Reinitialize Agents
In the back end system you can try to delete all MTEs in RZ21 > menu Technical Infrastructure > Reorgenize Segment Table > select the options with "ALL" in the CEN and the remote system to reorgenize all data.
Could you pls post for the missing MTEs a screenshot on the one side from the CEN system and on the other side from the remote system...
and last but not least you could try the following for missing OS MTEs
delete ALALERTS, ALMTTREE and ALPERFHI in /usr/sap/ccms/<SID>_<SNR> and check in the agents folder all trace and log files for errors.

Data Not Found in a Query

Hi guys,
I have built a Query on a Multiprovider which is based on a Remote Cube and Basic Cube. I can see Data for my filters via ListCube in both Multi Provider and Remote Cube.
The Query is showing Data when Restrict to Value Range [First Value, Last Value] for a Characteristic. It is not showing data when the Restriction is deleted.
Any Suggessions over this strange Problem ?
If the question is not clear please let me know.
I went to RSRT and compared the SQL Query and found
that it is not picking up this dimension table , "/BIC/DBCS_CMR13" "D3"
and SID Table "/BIC/SPCMRBG" "S2".
How can i resolve this issue.
<b>SQL Query showing results</b>
CREATE OR REPLACE VIEW "/BI0/0300129574" AS
SELECT
/*+ STAR_TRANSFORMATION FACT(F) */
"DU"."SID_0CURRENCY" AS "S____004"
,"D1"."SID_PCMRFNL1" AS "S____197"
,"DT"."SID_0FISCPER3" AS "S____047"
,"D4"."SID_PCMRTOD" AS "S____215"
,"H1"."PRED" AS "S____207"
, COUNT( * ) AS "1ROWCOUNT"
, SUM ( "H1"."FACTOR" * "F"."/BIC/PCMRLFIG" ) AS "PCMRLFIG"
FROM
"/BIC/FBCS_CMR1" "F"
, "/BIC/DBCS_CMR1U" "DU"
, "/BIC/DBCS_CMR12" "D2"
, "/BIC/DBCS_CMR11" "D1"
, "/BIC/DBCS_CMR1T" "DT"
, "/BIC/DBCS_CMR14" "D4"
, "/BIC/DBCS_CMR1P" "DP"
, "/BI0/SFISCYEAR" "S1"
, "/BIC/DBCS_CMR13" "D3"
, "/BIC/SPCMRBG" "S2"
, "/BIC/DBCS_CMR18" "D8"
, "/BI0/0300129573" "H1"
WHERE
"F"."KEY_BCS_CMR1U"
= "DU"."DIMID"
AND "F"."KEY_BCS_CMR12"
= "D2"."DIMID"
AND "F"."KEY_BCS_CMR11"
= "D1"."DIMID"
AND "F"."KEY_BCS_CMR1T"
= "DT"."DIMID"
AND "F"."KEY_BCS_CMR14"
= "D4"."DIMID"
AND "F"."KEY_BCS_CMR1P"
= "DP"."DIMID"
AND "DT"."SID_0FISCYEAR"
= "S1"."SID"
AND "F"."KEY_BCS_CMR13"
= "D3"."DIMID"
AND "D3"."SID_PCMRBG"
= "S2"."SID"
AND "F"."KEY_BCS_CMR18"
= "D8"."DIMID"
AND "D2"."SID_PCMRCNC"
= "H1"."SUCC"
AND
"DP"."SID_0CHNGID"
= 0
)) AND ((
"S1"."FISCYEAR"
= '2006'
)) AND ((
"DP"."SID_0RECORDTP"
= 0
)) AND ((
"DP"."SID_0REQUID"
<= 5284
)) AND ((
"S2"."/BIC/PCMRBG"
BETWEEN ' ' AND 'ERRM'
)) AND ((
"D8"."SID_PORU"
= 332
)))) AND ((((
"DT"."SID_0FISCPER3"
= 10
)) AND ((
"D4"."SID_PCMRTOD"
= 265
AND
"H1"."SUCC"
<> 2000008999
GROUP BY
"DU"."SID_0CURRENCY"
,"H1"."PRED"
,"D1"."SID_PCMRFNL1"
,"DT"."SID_0FISCPER3"
,"D4"."SID_PCMRTOD"
<b>SQL Query not showing results</b>
CREATE OR REPLACE VIEW "/BI0/0300129258" AS
SELECT
/*+ STAR_TRANSFORMATION FACT(F) */
"DU"."SID_0CURRENCY" AS "S____004"
,"D1"."SID_PCMRFNL1" AS "S____197"
,"DT"."SID_0FISCPER3" AS "S____047"
,"D4"."SID_PCMRTOD" AS "S____215"
,"H1"."PRED" AS "S____207"
, COUNT( * ) AS "1ROWCOUNT"
, SUM ( "H1"."FACTOR" * "F"."/BIC/PCMRLFIG" ) AS "PCMRLFIG"
FROM
"/BIC/FBCS_CMR1" "F"
, "/BIC/DBCS_CMR1U" "DU"
, "/BIC/DBCS_CMR12" "D2"
, "/BIC/DBCS_CMR11" "D1"
, "/BIC/DBCS_CMR1T" "DT"
, "/BIC/DBCS_CMR14" "D4"
, "/BIC/DBCS_CMR1P" "DP"
, "/BI0/SFISCYEAR" "S1"
, "/BIC/DBCS_CMR18" "D8"
, "/BI0/0300129257" "H1"
WHERE
"F"."KEY_BCS_CMR1U"
= "DU"."DIMID"
AND "F"."KEY_BCS_CMR12"
= "D2"."DIMID"
AND "F"."KEY_BCS_CMR11"
= "D1"."DIMID"
AND "F"."KEY_BCS_CMR1T"
= "DT"."DIMID"
AND "F"."KEY_BCS_CMR14"
= "D4"."DIMID"
AND "F"."KEY_BCS_CMR1P"
= "DP"."DIMID"
AND "DT"."SID_0FISCYEAR"
= "S1"."SID"
AND "F"."KEY_BCS_CMR18"
= "D8"."DIMID"
AND "D2"."SID_PCMRCNC"
= "H1"."SUCC"
AND
"DP"."SID_0CHNGID"
= 0
)) AND ((
"S1"."FISCYEAR"
= '2006'
)) AND ((
"DP"."SID_0RECORDTP"
= 0
)) AND ((
"DP"."SID_0REQUID"
<= 5284
)) AND ((
"D8"."SID_PORU"
= 332
)))) AND ((((
"DT"."SID_0FISCPER3"
= 10
)) AND ((
"D4"."SID_PCMRTOD"
= 265
AND
"H1"."SUCC"
<> 2000008999
GROUP BY
"DU"."SID_0CURRENCY"
,"H1"."PRED"
,"D1"."SID_PCMRFNL1"
,"DT"."SID_0FISCPER3"
,"D4"."SID_PCMRTOD"

Is seems to be referring to a different infoobjcet ( S1 and S2 in both options seem to refer to different SID tables - one is FISCYEAR and the other is the /BIC/SPCMRBG )
Is there any difference in the infoobjects in the query ? and also execute the query ( both versions ) in RSRT searching for Multiprovider explain...
Arun

Infotype Data Not showing in Infoset Query

Hi All
We have a custom infotype created and now added to a query infoset. The fields appear available for query, but show no output in the results. Any ideas ?

Apologies - I should really check the date parameters first

Data not coming to the query

Hi Experts,
I have a multiprovider build on a DSO. My query is build on the multiprovider.
Query requirement - to see the customers having no work excluding the date range provided by the user.
I have 2 variables: A & B.
This works as explained below:
Suppose the user entered the range - 03/27/2010 - 03/28/2010
then,
the variable A will get the data from 01/01/1900 to 03/27/2010 and
the variable B will get the data from 03/28/2010 to sy-datum (till date).
have both the variables as user exit.
I can see the data in the ODS & multiprovider, but when I execute the report, I cannot see any data...NO APPLICABLE DATA FOUND.
Can anyone plz help?
Preet

This is what I've written in the code:
DATA : diffdate type datum,
      g_date type datum.
if I_VNAM = ' CMUCREAL'.
IF I_STEP = 2.
    clear: l_s_range, v_mm, v_year, l_fiscper.
READ TABLE i_t_var_range into wg_t_var_range WITH KEY vnam = ' CMINMCRD'.
        if sy-subrc eq 0.
       l_s_range-sign = 'I'.
       l_s_range-opt = 'BT'.
       l_s_range-low = '19000101'.
       diffdate = wg_t_var_range-low .
       diffdate = diffdate - 1.
       g_date = diffdate.
       l_s_range-high = g_date.
       append l_s_range to e_t_range.
     ENDIF.
    endif.
ENDIF.
    if i_vnam = ' CMUCREAH'.
      iF I_STEP = 2.
        clear: l_s_range, v_mm, v_year, l_fiscper.
READ TABLE i_t_var_range into wg_t_var_range WITH KEY vnam = 'CMINMCRD'.
        if sy-subrc eq 0.
       l_s_range-sign = 'I'.
       l_s_range-opt = 'BT'.
       diffdate = wg_t_var_range-high .
       diffdate = diffdate + 1.
       g_date = diffdate.
       l_s_range-low = g_date.
       l_s_range-high = sy-datum.
      append l_s_range to e_t_range.
endif.
endif.
endif.

Order by most recent date not working in CAML Query

Hi,
I am trying to pull items from an announcements list and I would like the results sorted by most recent first, but it is coming back as least recent first. Can someone tell me what is wrong with the query? I even tried "Modified" and I get the
same result. Thanks.
         SPList oList = SPContext.Current.Site.OpenWeb("ts/hse").Lists["near misses"];
           SPQuery spQuery = new SPQuery();
           spQuery.Query = "<Query><OrderBy><FieldRef Name='Created' Type='DateTime' IncludeTimeValue='TRUE' Ascending='False' /></OrderBy></Query>";
           spQuery.RowLimit = 3;
           SPListItemCollection spListItemCollection = oList.GetItems(spQuery);
Sherazad

Hi,
I did a test in my environment as the capture below. It works properly.
I suggest you try the code in another list and test whether it works.
Feel free to reply with the test result.
Thanks
Patrick Liang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Patrick Liang
TechNet Community Support

Employee Entry Date in ad-hoc query

I have maintained dates in IT0041 - datetype 01, IT 0016 KONDT and also IT0000 has Hiring date with Emp Status 3 active.
The entry feature is also active. When i test the Function module, it brings the correct date.
However, when i run ad hoc query the output does not bring Entry Date . The values output for all employees is 00.00.0000. Can someone please guide how to resolve this error.
Thanks in advance
JG

Hey,
Check this Entry date not proper in adhoc query
Hope its helpful.
Regards,
Manoj.

Blank entry in adhoc query

Hi All,
Im have created a data source with table joins T001W and T134M.
Filed MANDT has been maintained when the join condition has been established at Data source level.
Adhoc query in business rule identifies the deficiency. But some filed in the result has blank entry.
Attached the screen shot for your reference.
Can you please let me know, how to fix the blank entry issue.
Thanks
Ashok S

Hello Ashok,
In this case, you have foundation and plug-in in both systems. I assume you have set data source and business rules in GRC system, am I right?
If this is the case, you might have several problems as before SP 10 for GRC 10.0, backwards compatibility was not implemented yet. It means that you must follow SAP note 1352498 in order to synchronize your systems.
If this is not the case, have you checked these values in SCU3 in ECC system?
Best Regards,
Fernando

SSRS pulls data from ESSBASE cube, data not showing

Dear Experts,
We are connecting SSRS 2012 to Essbase 11.1.3 to pull data from the cube, and having some issues with some members data not showing in the query designer and report, while some have no problem. And we couldn't find a pattern on which members won't show. We are wondering if this is a known issue and if there is a way to solve the problem.
Thanks very much.
Grace

Hi ,
Check the following:-
1 Check whether you have made the joins properly.
2 Check data at multiprovider level .
3 is data available for reporting in both the cubes
Regards
Rahul

Entry date not proper in adhoc query

Similar Messages

Maybe you are looking for