Entry does not exists in check table -- Validation

Hi friends..,
I am able to create new entries in my table with INSERT statement through a function module.
But, the problem is..,
I am having one key field in my table, and T1(another table) is check table for this.
So while creating the entries through SE11, its giving error message like ENTRY DOES NOT EXISTS IN CHECK TABLE. But the same entry i am able map through my function module..!
Any extra settings reuired for this..?
Or.,
Am i need to write validation code?
Thanks,
Naveen.I

Hi...Rama chary..,
I am having separate function modules to do this..!
So here I can't to update two table at time.
My function module updating a table field with out checking it wrt its check table..!
Even i write code to check table , it will not meet the functionality of SE11 error..!??
so what can i do..?
Thanks,
Naveen.I

Similar Messages

Entry SE01 1890 does not exists in T005G(Table)

Hi,
We are getting Bdoc error "Entry SE01 1890 does not exists in T005G(Table)" in CRM system.We are using CRM 7 and ECC 6.
Please help me in resolving this issue.
Thanks,
Rahul

Hi,
Thanks for the reply.
We are getting this error in BDOC monitoring.Similarly we haev more errors related to same error like" Entry SE01 1880 does not exists in T005G(Table)".
.Actually when i check this table city code 1880 is mentioned under region 18 in the country key SE.
Please help me

Error Entry does not exist in J_1BNFITMRULE (check entry) Nfe 10 Incomig

Bom dia pessoal.
Ao tentar executar um dos passos no cenário de compras normais, (Assign Purchase Order), o seguinte erro ocorreu
Entry does not exist in J_1BNFITMRULE (check entry).
Detalhe: Para o mesmo pedido ja havia sido efetuada 3 entradas via monitor sem qualquer erro.
Qualquer ajuda será muito bem vinda.
At
Pedro L Nobrega
Pessoal
Ja descobri o que aconteceu, na categoria de nota fiscal, retiraram tipo de item da categoria que estava sendo utilizada.
(Projeto global).... acontece.
Para evitar este tipo de problema novamente criei uma categoria especifica para o Incoming. (Compras Normais.)
Erro corrigido.
Abs
Pedro L Nobrega
Edited by: Pedro Luiz Nobrega on Jan 25, 2012 3:56 PM

Resolvido
Criamos uma categoria especifica para nfe incoming (Compras Normais), para que não ocorra novamente o erro,
a nota que estava sendo utilizada tinha na configuração tipo de item que foi retirado o gerou o erro.
Grato
Pedro L Nobrega

Transaction type does not exist. Check entries

Hello all,
EBP 5.0, CCM 1.0, unicode
When I try to log on different language than English and try to shop system is displaying two messages
Internal number range is missing for transaction type. Inform syst. admin
Transaction type does not exist. Check entries
And I cannot see link for Procurement Catalog.
All my customizing up to now was in English, due to the fact that SAP did not provide translation to Croatian (Latin-2 language).
Also catalog call-up has locale "en" for the calling of catalog from EBP.
Please give hint where I can start with debugging.
Gordan

Hello Yann,
main problem, language files for CCM and EBP are not suppied from SAP yet. MY BC told me that they installed Croatian language in WAS, so system should behave as language is intalled fully and represent text in English when there is no translation.
I cannot test other things because EBP will not go into the catalog due to the missing internal numbering for the transaction type. I checked BUS2121 in transaction types but nothing to be found.
I was thinking that those two problems are related but this is not true. First I have to solve number range that check the catalog. Only common between those two problems is logon language.
I even forced our special characters by entering them as UNICODE code and I can see them via catalog manager in english, but only for catalog items. Characteristics and product category names do not follow UNICODE specification.
Confused
Gordan

[nQSError: 59014] The requested column does not exist in this table.

Hi
As you know this error has been discussed in other threads.. the difference in mine is that not only the time series measures but all the columns are giving me the error...none of the columns are being displayed... The rpd has no consistency errors. can anyone suggest what may be going on?
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 59014] The requested column does not exist in this table. (HY000)
SQL Issued: SELECT column1 saw_0 FROM Paint3 ORDER BY saw_0
Thank you
mm58

I guess you have the column in RPD, and it is available for queries.
are you using any time measures? if so check you chronological keys.

The requested column does not exist in this table

Hi All,
I am getting the following error:
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 59014] The requested column does not exist in this table. (HY000)
SQL Issued: SELECT "Customers - Dim".CITY FROM MVDEMO ORDER BY 1
When I tried viewing data online I am able to view the data in the physical Layer. Also I tried connecting thru ODBC Client and issued the same SQL (above) and it returns the data.
I am using Oralce BIEE 10.1.3.2.1 version.
Please let me know if any faced this kinda issue and how to resolve this.
Thank you.

Check your column mapping in the BMM layer in your Customers - Dim logical table. Does the CITY column point to a physical table column?

Shipping type in delivery (Entry does not exist)

i am trying to post good issue in the delivery and i have Shipping type field as mandatory but when i try to post good issue with a value in the Shipping type the system says Entry does not exist(check your entry). Kindly help.
Regards,
Shahzad

Dear Mr. Khero.
You should atleast share your solution with other members as well. Knowledge sharing is a good thing and we are all here for this purpose.
Hope you do understand.
Best Regards,
AI. (Your great Friend - You remember???)

Error in ALV : Field Does not exists in Output table .

Hi All,
In my ALV report, program get dumped and showing error when i tried to put a col named Distribution channel ion the alv.
I have put the Distribution cannel field in the IT_FInal table , but still getting folwong errors :
Error : Field Symbol is not been assigned.
As Instructed i have passed I_INTERFACE_CHECK = 'X'.
By this i am getting detail error that :
Field Distribution channel does not exists in Output table & Heading for List is missing .
But i have maintained the distribition channel in IT_Final table
Please suggest wheather we have to define dis channel in any other place.
Thanks in advance.
Can any one help me regrarding this.
Thanks in advance.

Hello,
You have to populate the same in the fieldcatalog as well, i think you have not maintained this field there.
BR,
Suhas
PS: Also make it a point to follow-up on your previous post: [Error in ALV : Field Symbol not been assigned.|Error in ALV : Field Symbol not been assigned.]

CI_P0002 does not exist. Check name

Hello Experts,
I am trying to enhance IT0002.But i am getting below error:-
CI_P0002 does not exist. Check name
WHat could be the problem.Please let me know soon.
Thanks,
Viru

Hello,
Go to transction SE11 and type PA0002, and inside that you will find CI_0002 and click on that which will allow you to create the structure.
Try and let me know if you face any problem.
Best Regards,
JR

GR for Order (MVT 101) - Error - Table entry does not exist

I am getting error while posting GR for production order via MVT 101.
After resolving errors on G/L account and cost element, now this is the only error that I can't seem to resolve:
Check table TFBEFU_CR: entry 10 does not exist
Message no. M7001
Using SE16 I tried to check for this table, but system says it is not active in dictionary.
Please help.

Hi
Please, kindly check the note 183647 - Error message M7001.
As indicated in it, please, maintain the customizing entry in transaction OPK9 for your valuation area and re-test the system behaviour afterwards.
Regards,
Mauro

Table RSEG: entry does not exist while trying to take print of credit note.

Hello Friends,
Requesting you help on following issue.
My client want to take printout of credit/debit memo.
I've copied output type REKL and created new output type. Have attached form and have done other required settings for calling that new output type while creating credit memo.
Now, will trying to take printout using t-code : MR90, an error is appearing which says " Table RSEG: entry 10104653 2009 2 does not exist" - Message no. M8100.
As such i'm not able to take print out of same.
Please help me in this regards
Regards
Pragnesh
9819240550

Hi ,
Hey thanks a ton for your prompt reply.
I've tried with year 2008 but then t-code : MR90 is not able to pick any records from print.
If i put in 2009 in t-code : MR90 then it shows a record for print, but as i click on print preview or try to get print of said document, then it give this error.
Please help
Regards
Pragnesh

Value does not exist in VIQMEL table due to ILOA-ILOAN field

Hello All,
I am trying to check a PCR/OCR Notification but it seems Notification does not exist.
The notification number is not there in VIQMEL table.
VIQMEL takes reference of 3 tables - QMEL, QMIH and ILOA.
I checked QMIH table for this notification and found a field ILOAN. The ILOAN number given in table QMIH is not there in ILOA table.
Can you explain what could be the possible reason of empty ILOAN field?
Also if you could explain the significance of field ILOAN and how this number is generated?
Thanks & Regards
Devraj

There was an issue of value range of notification..

Action &OBJECT_ID& does not exist - when Filtering Table

Hey Everyone,
I am trying to implement filtering on a table (not alv).. i have followed the example in DEMO_TABLE.
- have put the method in WDDOMODIFYVIEW, bound the filtervalue of each column, and implememented a toggle button to show and hide filter row and gave it a filtering function.. - basically exactly like DEMO_TABLE.
but, when i enter a filter value.. i get this error.
The following error text was processed in the system LXA : Action &OBJECT_ID& does not exist
The error occurred on the application server vmsaple07_LXA_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: IF_WDR_RR_CONTROLLER~GET_ACTION of program SAPLWDR_RUNTIME_REPOSITORY
Method: GET_ACTION_INTERNAL of program CL_WDR_CONTROLLER=============CP
Also, something else thats not right is.. if i put an action under ONFILTER of the table.. The filter row appears when i am on Workbench... BUT when i test the application on the browser, the filter row doesnt appear!.. it did appear once, but its not appearing anymore.
Thanks...

hey, i figured it out.. My problem was in this part of WDDOMODIFYVIEW...
Set or cancel the table's filter action
IF l_is_filter_on = abap_true.
l_table->set_on_filter( 'FILTER' ).
ELSE.
l_table->set_on_filter( '' ).
ENDIF.
You must pass the name of filtering action in the above code.. Just create an action(like below), and pass the action name to the - l_table->set_on_filter( 'FILTER' ) - in WDDOMODIFYVIEW.
method ONACTIONFILTER.
wd_this->table_method_hndl->apply_filter( ).
endmethod.
Edited by: imatari on Jul 24, 2010 7:25 PM

Error :Extract Structure does not exist for the table YFSP03A .

Hi Could you please help me to solve the above mentioned problem?
I have a requirement where i have to generate the Data Source ' 3FI_SL_FS_SI ' using the table YFSP03A .
Using the Tcode: BW03MAST i tried to assign FI-SL to the ledger but it throwed me an error that extract structure does not exit for the table YFSP03A .The reason being that i didnot create an extract structure for the table.So i tried to create it using the Tcode: BW01,but i did not have authorisation for the Transaction and BI team also could not generate as even they were not authorized to generate extract Structures.
So, Please are there any other ways to generate Extract structure for the table so that i can generate the Data source? Or is there any other means of generating the Data Source? And i couldnot access the other Tcodes viz :FAGLBW03, FAGLBW01, FAGLBW02.

Hi Bharath,
Goto SE11, put the name of your extract structure in Data type and click display, check the version of the structure. if it is inactive then goto RSA6 and activate your DS.
After activation try to retransport.
Regards,
Durgesh.
Edited by: Durgesh Gandewar on Jul 25, 2011 3:13 PM

Field does not exists Error - INSTALLATION TABLE

We have applied ML MP9 on system database for our eRecruit Instance. We are getting a "Field does not exists" (for eg., INSTALLATION.GL) error for the components which refers to INSTALLATION table.
The error gets resolved if we introduce a .value in PeopleCode.
Note: Our Dev Instance is working fine which has ML MP9 applied on it.
Please find the PeopleBooks Comments for the .value Property:
Considerations Using INSTALLATION or OPTIONS Tables
When using the INSTALLATION or OPTIONS table, you cannot use the Value property. You must use the old style format, not the field object format. For example, the following code is invalid:
If %Page = Page.GP_RUN_TYPE And
INSTALLATION.TL.Value = "N" Then
&RS2.HideAllRows();
Thanks & Regards
Sudha

Hello,
You have to populate the same in the fieldcatalog as well, i think you have not maintained this field there.
BR,
Suhas
PS: Also make it a point to follow-up on your previous post: [Error in ALV : Field Symbol not been assigned.|Error in ALV : Field Symbol not been assigned.]

Entry does not exists in check table -- Validation

Similar Messages

Maybe you are looking for