Entry from table crmd_orderadm_h not found in table DNOD_NOTIF_S

Is it true that, whenever an entry is created in the crmd_orderadm_h, same entry is reflected in table DNOD_NOTIF_S with reference as field GUID ?
If not, when a entry is created with reference from same GUID in table DNOD_NOTIF_S w.r.t crmd_orderadm_h?

double post, thread closed

Similar Messages

Entry not found in Table T706V

Hi,
When I simulate a trip I get error message "Entry not found in Table T706V Argument JSP IN 0022420080901 is missing".
Where JS is Trip provision copied from 40 Trip Provision. I am not undersatnding what is 00224.
When I try this in IDES , it works with 40 Trip Provision Variant.The same config gives error in other system with trip provision variant JS.
Rgds
PV

The problem was solved by changing expert control view in Travel.
PV

Loaded dump from 12.5.4 to 15.7, Error 622 & Tables/Views not found

Hi all,
I am getting desperate trying to fix that issue. I had to import a dump from an ASE 12.5.4 into a new database on an ASE 15.7. I therefore enabled the compatibility mode server-wide and then proceeded to the load which seems to have performed correctly. The database seems well imported, and I can access most of the tables/views/procedures (from my C# application), but a procedure is giving me troubles.
I am getting this error while executing a given procedure :
Error: 622, Severity: 20, State: 1
Opentable was passed a varno of 52. Object 'temp worktable' in database 'tempdb' already has that session descriptor in use. This occured while opening object id -1245236 in database id 2.
I realised this was caused by a view which is used in this procedure but which is weird is that the error is not thrown when running the SQL code itself, out of the procedure context.
I am using Toad for Sybase as a client, and realised I cannot access the data tab of the concerned view, Toad gives me the same error. So I cannot execute this view while it performs without any trouble on the original server (production server which runs ASE 12.5.4).
I also realised, when trying to execute some pieces of the query individually that I get warnings about unfound tables (and that I should use sp_help to fix the problem). Although, the tables actually exists and I can access their data.
I have tried so many things and still cannot fix this problem. I've used 'upgrade_object', 'sp_recompile' on all tables, 'dbcc reindex' on all tables.
Would you have any idea where the problem could come from? Thank you very much

Thank you for your reply.
Good to know that enabling compatibility mode before or after loading the load doesn't have any effect.
I didn't drop/recreate all the SP and views but I can tell you I recreated a similar view and it causes the same issue.
I had a look at your link yes. I have run 'dbcc upgrade_object' several times already, on the view and the procedures calling the view, and it won't solve anything.
I've seen a similar post about the problem I have when executing the code itself of the view in a "normal" adhoc query (errors saying the tables are not found) : SAP Sybase Forums - ASE - Backup and Recovery - PRoblem after restore - Object does not exist.
Could it be the same problem for me?
Although I've tried splitting the SQL query and executing the parts individually and it works without any trouble. Problem is when the 2 parts of the view are put together. It may be something that was possible with ASE 12.5.4 but not with 15.7 and that compatiblity mode doesn't solve. My view consists of an union a two selects where both have left joins, case when then else, not in and a final group by (adding an order by doesn't help, as I tried).
PS : I don't have access to the production server where the dump is actually from (but I could if it is really necessary)

IDOC for SAP BP Message "Table BAPIADTEL entry to be changed not found in "

Hi Experts,
I have a requirement to update BP Address details using LSMW.
I am usign IDOC Message Type "BUPA_C_CHANGEADDRESS" and Basic Type "BUPA_C_CHANGEADDRESS01" for this requirement.
Using this i am able to update City, PO BOX, Postal Code, Street, region.
However, i am unable to update Tel Number, Extn, Fax Number and Extension.
I have added Structures E1BPADTELX & E1BPADFAXX and "X" to Update them.
When i run LSMW, it updates all except Tel, Fax and their extension.
I get Status 53 message "Table BAPIADTEL entry to be changed not found in target system". I have requirement to change those numbers.
Can someone please tel me how to update those 4 fields ?
ALso how and where this Data are stored in tables?
Under BP Tcode, Under General Tab, it says "Address Independent Communication.
Please help.
TnR

Hello experts, hello to all,
I'm facing with the same task. I have a requirement to update BP postal code using the LSMW.
Identical to Pintoo D I am usign the IDOC Message Type "BUPA_C_CHANGEADDRESS" and the Basic Type "BUPA_C_CHANGEADDRESS01". In the section Field Mapping... I have mapped the Business Partner ID (BUSINESSPARTNER) and the City postal code (POSTL_COD1). In order to update the postal code I set in the Tree-Structure E1BPBUS1006_ADDRESS_X the Field POSTL_COD1 with a constant (= X).
When I try to process the IDoc I get the Error 51:
Data set BUT020 for BP 0000403643 maintained time-dependently,despite inact.time dep.
Additonal I checked the recommenden OSS Note 810634 and the Customizing but everything is OK. Did I mistake during the confuguration of the LSMw project? I cannot find a documentation regarding the IDoc Msg.Type BUPA_C_CHANGEADDRESS.
Kind regards
Ioannis Moutogiorgos

SAP database tables - Column statistics not found for table in DB02 - During import, inconsistent tables were found - Some open conversion requests still exist in the ABAP dictionary.

Hi Experts,
I'm implementing SAP note 1990492 which requires manual implementation. Implementation includes modifying standard tables (i.e. append
the structure FIEU_S_APP_H to table FIEUD_FIDOC_H). After this I've adjusted the table in SE14 (Database Utility). I've done checks in SE14 and it shows the table is consistent.
But during DB02 -> Space folder -> Single table analysis -> Input table name -> Indexes tab -> Upon clicking statistics, there is a warning "Column statistics not found for table".
Our basis team is implementing an Add-On in the development system related to RWD Context Sensitive Help. They cannot proceed due to the following inconsistencies found in the table.
Screenshot error from the activity:
Screenshot from DB02:
I'm an ABAP developer and have no other ideas on what to do. Thanks in Advanced.

Hi All,
We were able to fix the issue through the following:
1. Call transaction
SE14.
2. Enter the name of
the table and choose "Edit".
3. Choose
"Indexes".
4. Select the index
and choose "Choose (F2)".
5. If you choose
"Activate and adjust", the system creates the index again and it is
consistent.
6. Check the object
log of this activation.
7. If an error
occurs, eliminate the cause and reactivate the index.

XML File as Datasource - The table is not found in file

Hi,
I am trying to use a xml file as datasource and want to map those columns to the existing DWH. Actually, it is additional data which should be combined with the existing DWH data. Therefore I am using the fragmentation option.
I did it already on my privat pc and it works, but as soon as I implement it to the DEV environment it doesn' t work at all :( I am getting the following error:
Status: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 64002] The table is not found in file C:\Ist.xml loaded. (HY000)
Could somebody help me??
Thanks

If you changed environments make sure that the XML file actually exists in the location specified at C:\ist.xml.
Also be sure that the information in the properties section of the XML data source match your DEV environment. If you used any session variables be sure that you have also modified those in the DEV environment to reflect the DEV environment.
Did you switch from a same OS environment, i.e.: Linux to Linux or Windows to Windows? Or did you go from a Windows to Linux OS?

Table "StoredProcedure" not found when changing Database location in VS 2005.

<p>I'm having a problem changing the datasource location when generating a report using the report viewer in VS2005. If the table is a stored procedure, I get the message "Table (StoredProcedureName) not found", but if the report references tables rather than a stored procedure the location is changed and the report runs successfully. The same problem was reported in earlier versions of Crystal Reports and was fixed in a service pack, but I couldn't find any documentation on the VS2005 version. </p><p>Does anybody know how to fix this problem? I am using CrystalDecisions.CrystalReports.Engine.dll version 10.2.3600.0 and SQL Server 2000.</p>

Peggy, I wonder if getting the latest SP for CR 10.2 will be better for now. SP 1 can be downloaded from here:
https://smpdl.sap-ag.de/~sapidp/012002523100006007872008E/crvs05sp1.exe
I\Let us know if that does not resolve the issue and we'll take a closer look before going all the way to CR XI.
With regards,
Ludek

External Table error: KUP-04043: table column not found in external source

I am trying to get the syntaxc correct for an external table.
I keep getting this error:
ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-04043: table column not found in external source: SITE
29913. 00000 - "error in executing %s callout"
*Cause: The execution of the specified callout caused an error.
*Action: Examine the error messages take appropriate action.
Data looks like: (some of one of many files, where the character field widths are variable)
ZZ,ANYOLDDATA,77777,25002000,201103,12,555.555,11.222
ZZ,ANYOLDDATA,77777,25002300,201103,34,602.162,8.777
ZZ,ANYOLDDATA,77777,25002400,201103,12,319.127,9.666
ZZ,OTHERDATA,77121,55069600,201103,34,25.544,1.332
ZZ,OTHERDATAS,77122,55069600,201103,22, 1.011,0.293
External table def I have:
CREATE TABLE MY_INPUT (
FIRST_CODE VARCHAR2(10),
SECOND_CODE VARCHAR2(20),
MY_NUMBER VARCHAR2(20),
THIRD_CODE VARCHAR2(20),
YEARMO VARCHAR2(6),
N NUMBER,
MEAN NUMBER,
SD NUMBER
ORGANIZATION EXTERNAL (
TYPE ORACLE_LOADER
DEFAULT DIRECTORY INPUT_DIR
ACCESS PARAMETERS (
RECORDS DELIMITED BY newline
BADFILE INPUT_LOGDIR:'bad.bad'
LOGFILE INPUT_LOGDIR:'log.log'
DISCARDFILE INPUT_LOGDIR:'discards.log'
fields terminated by ',' LRTRIM
MISSING FIELD VALUES ARE NULL
REJECT ROWS WITH ALL NULL FIELDS
( THIRD_CODE,N,MEAN,SD) )
LOCATION ( 'myfile.rpt')
NOPARALLEL
REJECT LIMIT UNLIMITED;
I have the directories INPUT_DIR and INPUT_LOGDIR defined, and read/write access granted to the user who creates the table and tried to query from it.
I have tried various combinations of VARCHAR2 lengths and NUMBER vs VARCHAR2 for some of the numeric fields.
I am not getting any Bad, Log or Discard files.
I can do a GET from the SQL prompt, and see the data:
SQL> GET 'C:\temp\input_dir'myfile.rpt'
and I see the data.
Windows 7
Oracle 11.2
I am not positive of the newline record delimiter - these files are generated by an automated system. Probably generated on a UNIX machine.
Any suggestions on what to try would be helpful.
KUP-04043 error message says to check the syntax .. .I am running out of thigns to check.
Thank you - Karen

And the get ( I created the sanitized file, so we have a real working, failing, santiized example):
SQL> get c:\Inputfiles\myfile.rpt
1 ZZ,ANYOLDDATA,77777,25002000,201103,12,555.555,11.222
2 ZZ,ANYOLDDATA,77777,25002300,201103,34,602.162,8.777
3 ZZ,ANYOLDDATA,77777,25002400,201103,12,319.127,9.666
4 ZZ,OTHERDATA,77121,55069600,201103,34,25.544,1.332
5* ZZ,OTHERDATAS,77122,55069600,201103,22, 1.011,0.293
So the full series is:
CREATE DIRECTORY INPUT_DIR AS 'C:\InputFiles';
-- grant READ and WRITE
GRANT READ ON DIRECTORY INPUT_DIR TO ILQC;
GRANT WRITE ON DIRECTORY INPUT_DIR TO ILQC;
-- As SYS, create the bad/log/discard directory:
CREATE DIRECTORY LOGDIR AS 'C:\InputFiles\Logs';
-- grant READ and WRITE
GRANT READ ON DIRECTORY LOGDIR TO ILQC;
GRANT WRITE ON DIRECTORY LOGDIR TO ILQC;
CREATE TABLE MY_INPUT (
FIRST_CODE VARCHAR2(10),
SECOND_CODE VARCHAR2(20),
MY_NUMBER VARCHAR2(20),
THIRD_CODE VARCHAR2(20),
YEARMO VARCHAR2(6),
N NUMBER,
MEAN NUMBER,
SD NUMBER
ORGANIZATION EXTERNAL (
TYPE ORACLE_LOADER
DEFAULT DIRECTORY INPUT_DIR
ACCESS PARAMETERS (
RECORDS DELIMITED BY newline
BADFILE INPUT_LOGDIR:'bad.bad'
LOGFILE INPUT_LOGDIR:'log.log'
DISCARDFILE INPUT_LOGDIR:'discards.log'
fields terminated by ',' LRTRIM
MISSING FIELD VALUES ARE NULL
REJECT ROWS WITH ALL NULL FIELDS
( THIRD_CODE,N,MEAN,SD) )
LOCATION ( 'myfile.rpt')
NOPARALLEL
REJECT LIMIT UNLIMITED;
SELECT * FROM my_input;
and GET is as above.

String not found in Table

I get a String not found in table on one of the Tabs in the properties area of many of my steps in TestStand. I had this error once before and it was due to the switch exec not being installed. I have downloaded the NISwitch and installed it yet I still have the error. Any ideas?

Hello Marc,
The Sequence Editor looks for those strings in the following INI file:
C:\TestStand\Components\NI\Language\English\TestStandStrings.ini
This INI file should have all the keys corresponding to the Switching tab under the [SEQUENCE_PROP_DLG] section. I am attaching the INI file that you can use instead of yours. You do NOT need to have Switch Executive installed for this INI to have the Switching keys. They all should come by default. This INI file didn't contain these keys in TestStand 2.0 since the Switching part was added in TestStand 2.0.1. The only reason for you getting the "String not found in table" error (that I can think of) is if somehow you are using the INI file for TestStand 2.0 instead of the new for
TestStand 2.0.1.
I think that using the attached INI file will solve your problem.
Regards,
Carlos Leon
Applications Engineer
National Instruments
Attachments:
TestStandStrings.ini ‏413 KB

How to force BI Server to pick from the Agg table and not the Fact table?

Hi All,
I have 3 tables as the Sources in the Key measures. 2 are fact tables and the other one is the agg table.
E.g.
Fact 1 at A,B,C,D and E level
Fact 2 at A,B,C level
Agg at A,B,C level which contains the measures from the Fact1 and Fact2
So when I select the measures from the Agg which are coming from Fact1 the Agg table get fired and when I select measures from Agg which are coming from Fact2, the Fact2 table gets fired in the SQL Query.
Now my question here is there anyway to tell BI Server that when I select Fact2 measures fire the Agg table and not the Fact2 table. The reason being the Agg and Fact2 tables are at the same level.
But I need to keep the Agg table as it is one level higher than the Fact1 tables.
Any pointers would be helpful.

hi,
you explain us your situation really good.but you forgot to tell us the most import,the measures in aggregate table and the aggregated dimensions.
meaning,you have 7 measures aggregated in some levels of your dimensions tables?if yes,there is no possibility Bi goes anywhere else..(by choosing only these measures and the defined levels at your dimensions..)
One more thing,if you choose a combination of your 2 fact data sources,bi goes?where???
hope i helped...
http://greekoraclebi.blogspot.com/

Table Driver Not Found message during initial boot up - What is this?

Every since upgrading to 10,5 when I boot or change accounts I get the message, "Table Driver Not Found". I am not sure what program this is but there is what looks like the letter A and an art stand? I press ok and never see it again unless I log off or reboot.
Any clue?

Did you mean "Tablet Driver Not Found"... oh you did in the title!
So, did you ever have a Wacom Tablet or anything installed before?
Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons

Internal error: Entry in COKA-Buffer not found

Hi,
In FB50 I was trying to post the following entries:
760100 (expense/cost element) Dr.     1000
100000 (petty cash account)                         1000
When posting (ctrl+s) the following error appears "Internal error: Entry in COKA-Buffer not found". At this point system stops the transaction and exits from that t.code. On expanding the error the following is displayed :
"Internal error: Entry in COKA-Buffer not found
Message no. KC051
Diagnosis
The system could not find the entry with the following key in the COKA float:
Object number = AO00000000000000108166
Cost element   = 760100
Origin group   =
System Response
An internal error has occurred. Processing stopped.
Procedure
Notify your system administrator."
We checked the table COKA and the above mentioned object no. was not found. So how is the system displaying this particular Object nu.?
Can someone please help to solve this problem?

Hi friends,
we are having the same problem with PA objects in FI transactions. Object PA in COKA is different from object PA in COEP when we are posting.
Internal Error: KC051 Buffer not found.
Issue transactions are: F-02, FBB1, F110,... but curiously transaction F-01 works OK...
Any suggestions please? We don't know what we can do... we've checked all sustitutions and validations FI/CO but we don't find anything.
Thank you in advance.
Regards.

Table type not defined for table control "T_CONTROL" (Custom table)

Hi All,
I m facing a problem in ITS mobile service.
The Table control designed by me in R/3 (Module pool program) is
not getting displayed in ITS mobile page.
It is giving me an error "Table type not defined for table control "T_CONTROL" (Custom table) ".
Can you please let me how this issue can be resolved.
With Regards,
Mahesh

CONTROLS: table_ctr TYPE TABLEVIEW USING SCREEN '0010'.
try using this....
Regards
Vasu

CMR JDEV9032 TABLE VIEW NOT FOUND

Hello,
I'm breaking my head on the following:
I created two entity beans (A and B). Both are CMP EJB's.
In EJB terms : A has the field (id, name), B also.
In the deployment descriptor I set a CMR relationship from A to many B's. This is just like the example of the EMP DEPT. The only difference is that there are no tables mappped yet of the EJB's A and B. They are to be generated at deployment time by the oc4j instance.
This goes correctly. The tables are created (no intermediate tables are created), direct foreign keys (I'm using oc4j 904 pre to do this).
So the idea is to work from EJB's and not to worry about the database.
Since I'm using a CMR (so local interfaces are used), I created a Session Facade, so that I can try to create entity (read records) through a sample client (generated by JDeveloper 9032).
I can create individual ejbs (==records), I see them in the database. But the moment I try to relate the objects (either by doing a B.setA(LocalA) on the B-entity or by adding to the collection A.getBees().add(LocalB)) it goes wrong.
None of these work. I get a table or view not found exception. This is strange, since I can see at deployment that two tables are generated, exaclty like I expected. But setting the relationship is very hard !!!!!!
My question is: who can help me on this ? I found some examples on otn.oracle.com, but they NEVER described the situation where you want to set the relationship.
Now I'm working for a customer and the deadline is reaching. JDeveloper 9032 is the developerplatform. The embedded OC4J shipped with JDeveloper has a bug (Datasource not closed), that's why I'm using the OC4J 904 pre, since the bug is fixed in this release. Of course a Oracle 9i database is used.
Hope to hear from you soon.

Dear Debu,
The only things I set in the orion-ejb-jar.xml is that datasource name and the table name. I can create instances of the A and B EJB's. Setting the relation between A and B seems to result in the message "Table or View not found".
Furthermore If I try to do:
(on Entity A).
(This code is declared in a SessionFacade EJB which is used to set the relation();
public void connect( Long idA, Long idB){
LocalA a = LocalAHome.findByPrimaryKey(new Long(idA));
LocalB b = LocalBHome.findByPrimaryKey(new Long(idB));
// now b is filled.
a.getBees().add(b); // Exception is thrown.
The Exception is an Illegal State Exception.
My Question is Why ?
Regards,
Rokesh Jankie

Table AFVG not found

Hi experts,
This is the first time I am working on PP side of BW extractions and here is the issue I am facing. Please share your experiences.
For Extractor 2LIS_04_P_ARBPL, in LBWE under Maintain Structure view, I see 3 tables AFKO, AFPO and AFVG. (I took these table names from Com Structure MCAFKO etc.). Out of the 3 tables, I found the first 2 in SE11 but table AFVG is not found though. Instead there is AFVV which is very close. Please let me know if there is another way of finding table details from extract structure/com structure. Thanks in advance.

Hi,
AFVG mentioned in LBWE is a structure. There are lot of other Structures that start with AFVG. Check out the field of the structure and find out the tables/programs/ Function modules using Where used list in SE11.
Check out this thread -
How to find source table
Regards,
Geeta
Edited by: PGeeta on Oct 13, 2011 10:20 AM

Entry from table crmd_orderadm_h not found in table DNOD_NOTIF_S

Similar Messages

Maybe you are looking for