Entry in iCal 2hrs later than requested

When I receive a meeting request in Mail via the Exchange account, the entry is 2 hrs later than the requested time.

Hi Gavin,
A very similar situation happen to me...
I have verify which time zone were selected, since it was supposed to be the one that computers is using by default in my preferences panel.
But In the preferences panel of ical > Advanced there is an option saying
Turn on Time Zone Support, which I believe is used for people who travels into different countries. If selected, go to the calendar panel in the right-side panel (info one) You can check which time zone is selected...
If it is not, check the Date & Time Preferences, in the main preferences panel.
Well... hope this will help You somehow
Pipa

Similar Messages

Requested end date must be later than requested start date

Hi,
I am getting an error after the creating the support ticket as "Requested end date must be later than requested start date".
Please advise the solution.
Regards,
Rajesh Kumar.R

Hi Raj,
If you look for this message in DEBUG, youu2019ll find, that it is raised in functional module CRM_DATES_SERVICE_IR. That FM is called if your date type equals to constants GC_APPOINTMENT_TYPE-SRV_CUST_BEG (SRV_CUST_BEG) or GC_APPOINTMENT_TYPE-SRV_CUST_END (SRV_CUST_END).
So, I can say that itu2019s some kind of standard check inside CRM core, and you canu2019t turn it off.
And the workaround variants are listed earlier:
-     You can fill the date SRV_CUST_END with some rule as Mohammed has suggested (even with dumb ISM_INFINITE which will put 31.12.9999 and it will be obvious that user didnu2019t change it)
-     You can move to Z* date types, like you said, and checku2019s wonu2019t run
-     And finally, you can try to delete this error message using BADI method CRM_APPT_CHECK_DEPENDENCIES, CRM_APPOINTMENT_BADI (as I remember it runs after this standard check). But I wouldnu2019t recommend doing it, because CRM_DATES_SERVICE_IR could be called not only in this moment and errors could appear in random placesu2026
Best Regards,
Vadim Shmarin

Siri creates reminder one hour later than requested

Hello, dear community. I have recently noticed that Siri creates reminders one hour later than needed (e.g. when asked for 10PM creates it for 11PM (see the screenshot)).
I live in Moscow, Russia, so I believe this has to deal with our new Time zone, which is GMT+4. I have automatic time enabled in settings for Moscow.
I guess this is a nasty bug and would like to help fixing it.

Hi,
I have exactly the same issue.. My time zone is GMT+3 (Jerusalem). iPhone 5, ios7.0.1

Requested end date must be later than requested start date in Service Request

Hello Experts
I am getting this error in the service request when the date displayed in UI is
Requested start date-06.05.2014
Requested End-08.05.2014
I have searched this error in the SCN, many people have posted this error . I have not got any satisfactory answer in the posts. I am attaching screenshot in the post.
I am configuring the service request.Please reply as its urgent
Thanks all of experts in advance

Hello Ashik
I am facing a new problem please help
I am currently working on service request.I am facing a problem in the date management there.In my service request i have 5 statuses .One of my status is "Pending with consumer".I am using duration settings of service request.By duration settings , i am calculating the duration for which its pending with consumer.I am having 2 response profile one is 24*7 and other is having 9 working hours.In the service request from the SLA configuration i am calculating the escalation date & Time .I need to add the pending with consumer duration with the escalation date and time.I am facing a problem , i am explaining whole problem ..
Let say if the pending with consumer duration is 1440 minutes(that is 24 hours) .I am adding the minutes to the escalation date through the date rule.
I am facing problem that if the service profile is 24*7 then there is no problem but if it is having the 9 hours working service profile then after adding the minutes to it the escalation date is changing to 4 days ahead which is wrong.
I need to add only those minutes for which it is pending with consumer in working hours for the 9 hours service profile
I need to dynamically determine the working hours from the duration then add it to escalation dates when the status is changed from pending with consumer.
Please suggest a badi will work or how to do it.Its urgent as i need to give demo.I will appreciate a quick reply.Please reply

Request end must be later than req start date

Request end date must be later than request start date
Any explaination, what configuration I need to carry on to clear the issue
Regards,
Ajay

Hi,
I am also getting same error while I create a new service request. I have assigned the date rule for both start date and end date. Request start date is today's date and end date is today's date+3 days. i can see the dates on screen, but still when I save I am getting Requested end date must be later than requested start date. Please let me know am I missing something here.
Regards,
Reddy

Tasks sync error: "alarm set for later than entry ...

I upgraded the firmware on my E71 to the latest version. Since then syncing my tasks with Outlook 2007 has been a battle. The main problem is that once syncronised and older than 24 hours, I no longer can edit the tass on my mobile; only within Outlook. I get a "alarm set for later than entry starts" error on my E71. I have reformatted the phone, restored the data, deleted all calendar entries in the phone - resync with Outlook, but the problem persist. I also get duplicate entries at time or entries which do not sync in both directions. This messed up most of my tasks. PLEASE HELP.

I do experience the same issue with my TODO in Nokia E72. NOKIA are you listening here?

Nokia E72: "alarm set for later than entry starts"...

Hi,
I have bought recently a E72 nokia.
It replaced my old E50 ...
I have used a lot the "To Do" calendar entry feature to plan some actions on my old E50 Nokia.
I was not well impressed by the E72 "To Do" because if I'd like to re-schedule the ToDo entry I cannot do it and I'm receivieng all the time the "alarm set for later than entry starts" error.
It is crazy because I cannot do anything but just close everything ... abd go to the default screen.
Is this a bug or it is a bad "feature" of the new Nokia E72 ?
How can I re-schedule a "To Do" ?
Is there a different understanding from software point of view between E50 "To Do" and E72 "To Do "?
Thank you for support.

I do experience the same issue with my TODO in Nokia E72. NOKIA are you listening here?

I have managed to sync my iPhone 4 to my btyahoo calendar with caldav. All entries appear on the phone calendar on the correct date, but the time given is always 5 hours later than the (correct) time on the computer. How can I rectify this?

Why do the times for each event or appointment appear on the phone calendar exactly 5 hours later than the correct times entered into the Yahoo calendar on my P.C? Is there a way of rectifying this, either on the Yahoo calendar site, or on the iPhone?

You got the new iphone????? I have same problem. I transferred audiobooks to device to find no audiobooks on device (despite it being in iTunes as if it was). Have you found a solution????? I even tried to change import settings on format transfer but hasn't worked.

How to rid of multiple entries in ical

How the blazes do you you get rid of MULTIPLE entries in ical? I have read many answers and printed off a few to follow them but invariably i get to a point where I am unable to take the next step! I back track and and unable to find a fault of where I went wrong!! Then I have to ask myself WHY? Why on earth am I having to go to such extreme lengths to get rid of the unwanted entries?
Come on now Apple it is you who should be providing the simple logic answer to this?
I decided to give up? just ignore the other entries it easier than going frantic trying (and anyway I am frightened I may throw the macbook in my temper)
bye bye
bob

Hi pvonk
I do know how to delete the odd file but I have things like bank holidays entered 7 or 8 times and Trooping the colour 15 entres Queens jubilee 14 times.
I just want to stop the thing from doing that and if there is a way my question is why do I have to do it? surely apple should fix it or whatever
peardrop

Events are a day late than entered and duplicated

since ios5, events are showing up on the ipad a day later than they did before the uprade. ical on the mac was doing the same mistake before the upgrade. the actual info of the event shows the correct date and time.
i did change the first day of the week to monday (on the mac), in case that gives anyone a clue. changing it back doesn't cure it though.
time support is on - i am located in new zealand - on both ipad and macbook. turning it off doesn't cure the problem.
on the mac, most events are duplicated, sometimes on the same day, but some events are shown on the correct day plus a day later.
one of my main reasons for using an ipad, indeed mac at all, is that it "just works".
sync is now done over icloud.
does anybody know why this is happening? i need to enter new events but can't trust the software not to stuff it up. back to pen and paper...

just thought to check on ical on icloud. same problem, but as with the ipad, no duplications.

Calendar bookings are 1 hr later than we sent

Hello,
We have an problem. Exchange 2010. Outlook 2010. I got below complain from users. Please help me on this.
Also some people are saying the times on their calendar bookings are 1 hr later than I sent out and also what's booked on my calendar, this has resulted in some staff UK and USA missing key meeting in the last 1 week?
Regards

Hi,
Are the calendar bookings 1 hour later in all attendees’ calendars or just some specific calendars? Does the issue only happen to the meeting request that you are the organizer? How about the meeting organized by other users?
If all the problematic meeting request are organized by one specific user, please check the time, time zone and daylight savings time settings respectively in Windows
Control Panel’s Date and Time applet of all computers, OWA settings,
Outlook Options. Make sure that they are the same values.
If all configurations are proper, please create a new calendar invites respectively in OWA and Outlook. Then send it to users to check whether the issue persists.
Thanks,
Winnie Liang
TechNet Community Support

DTM deleted old entries in iCal!

I keep my old entries in iCal as sort of a diary. A short while ago I started looking for something from a couple of years ago (on my computer), and discovered that everything that was over a year old was gone!. I was not aware of the archive feature of iCal prior to that time, so just figured I could restore everything from a backup. No go -- don't know how long the data had been missing. So, I manually recreated what I could from my computer at work, and archived it for safekeeping. Last evening I synced my BB Curve again, and now the data from older than 10 years is gone (my data went back to 1993). I had purposefully done an archive just before syncing for that very reason, so I was able to restore.
Does anybody know why this is happening? And what to do to correct it? I know I can archive each time I want to sync, but that seems a hassle. Don't really care if the info is on my BB or not, but most assuredly do NOT want it deleted from my iCal. The data is very important to me.

in iCal preferences>advanced tab...you can select to delete (or not) events and items....see if any of these are checked.
4.6.1.305 hybrid
Mac Pro 2X2.8 Quad SL

Only receiving repeat entries in iCal on iPhone 3GS v5.1.1 since iMac went down for service

Yesterday I took my iMac in for service. Today I was checkingl entries in iCal in my iPhone 3GS v5.1.1 and all entries were missing except those that were Repeat entries. I tried to go to iCloud to check iCal but iCloud didn't recognize my account and password and said I had to creat a new account.
What is up?

I had this same exact issue while traveling in Italy and France (I returned yesterday 17-October).
Before leaving, I verified by phone w/At&T that I had all necessary features to use my phone overseas. They said yes I did have all necessary features to use my phone overseas. They did offer me their AT&T World Traveler plan for $5.99/month but I declined since I would not use this feature enough to justify the monthly cost. They said my phone would still work overseas, but my per minute usage rate would be slightly higher. ...HOWEVER, I could not connect with any of the available networks while overseas (same results/messages as you).
I just spoke w/At&T again. Now they say I did not have the necessary feature to use my phone overseas. This is what I found out:
1. You can sign up online for the World Traveler $5.99/month plan. This will allow you to use your phone overseas.
2. If you do not want the $5.99/month plan, you need to have the Expanded International Roaming feature activated on your phone. If it is activated, you will see it on your online account under "International Features". Be aware, the rates will be higher for all services (I believe they told to make sure "Data Roaming" is turned off, otherwise I will be charged $20.00/minute for internet access")
3. If you have had your phone less than 90 days, and you want to activate Expanded International Roaming, you must call AT&T and ask to speak with International customer service. According to my recent phone call with AT&T, this is the only department that can activate the services (@ less than 90 days).
I'm still not confident this issue is resolved, but I will find out next time I travel outside the United States.

I can't make any entries in Calendar further ahead than February. Why?

I can't make any entries in Calendar further ahead than February. If I try to make an entry in March the Calendar shuts down. Why?

Try removing any all-day events from the calendar for the 1st April 2013 e.g. if you are syncing the calendar from somewhere else (e.g. Outlook on a PC or iCal/Calendar on a Mac) then change it to a timed event instead of all-day (if you don't sync your calendar from anywhere then try going into list view, go to 1st April and change any 'all day' events to times e.g. change Easter Monday to start at something like 4am) - it seems that there is a problem with all day events on that date which is when the clocks change due to daylight saving on the day before.

On LOGIN: 01422 exact fetch returns more than requested number of rows

hi -- When logging into an application (as any valid user) I get the above error message (01422 - exact fetch returns more than requested number of rows) on page submit. However, when I go into DEBUG mode (where there are also prompts for username and password) I don't get the error message --I'm logged into the app just fine.
Any idea what this is about? I don't know query APEX is trying to execute;
it certainly doesn't make sense to me that it works while in DEBUG mode.
Note: this is an app in development that's been sitting dormant for 6 months due
to lack of funding. The login worked 6 months ago, but now know. Don't know if
that's helpful information...
Thanks,
Carol

hi Scott -- Your question made me think to examine not only the login process,
but other processes I'd added to the page -- and that's where the problem was!
(My brain is a bit rusty on the APEX re-entry process).
Thanks for the spark :)
Carol

Entry in iCal 2hrs later than requested

Similar Messages

Maybe you are looking for