Entry in J_2iRG1bal

HI,
           What is the purpose of entry in table J_21RG1bal when any way we have to put a zero value entry of stock. what is the basic purpose of doing it?

Dear Komal
Its not 21, its J_2IRG1BAL Table.
Its for the "Initial updation/uploading" of opening balances for receipts/issues with the material form.
This has to be done, very very carefully,as any mistake here, will lead to a total chaos.
Rgds
Sumanth.Gururaj
Consultant/Systems Analyst - SAP SD/MM
Edited by: SUMANTH GURURAJ on Jan 4, 2011 4:26 AM

Similar Messages

  • When J_2IRG1BAL table needs to be updated.

    Dear All,
    We have created a new material (Finished goods). But not sure, when we need to update the table J_2IRG1BAL.
    Please tell me which option I have given is correct.
    1. Immediately after the material creation
    2. After the goods receipt (i.e. Goods receipt updation in J1I5 with RMA classification)
    3. After running a business cycle (Sales order to Invoice)
    Kindly update me on this.
    Also let me know the process for other materials (Semifinished, Capital, Raw materials)
    Regards,
    Mullairaja

    Hi
    Its always better to create the entry in J_2IRG1BAL after creation of the material.
    You have to enter the below details like
    MATNR
    FORM packed or loose
    WERKS
    check this note which will be useful
    Note 951955 - CIN General clarifications for RG1 goods
    regards
    SAP SD

  • Extraction of RG1

    Hii to all ,
    i have a problem regarding RG1 Extratn , if i m uploading stock on 31 march , updating RG1 at 31 march ...and when i have to extract it , whether on 31 march or on 1 april
    .. idealy SAP suggests to extract it on 1 april , but if i m doing so , i m not getting initial upload entry in j216 which is made at 31 march as a stock entry .
    plz guide me

    Hi,
    For getting RG1 opening balance as on 01april, you have to make table entry in J_2IRG1BAL, as opening balance and Material packaging form as "P", if you have updated RG1 op balance thru J1I5, it will not give you op balnce instead it will updated in manufacturing column.
    Which method you have used ?
    Regards,
    Vikas

  • RG1 register- J_2iRG1BAL table values plant wise

    Hi Experts,
    I have a requirement in RG1 report, client is not satisfied with the  standard sap format, so we are intending to develop a Z-report. the steps which i am following as below:
    I have uploaded the J_2iRG1BAL table but requirement is that when i execute J2I6 the balance should be fetched plantwise and same should be updated in report.
    I have checked J_2iRG1BAL where we cannot maintain same material on same date.
    I have  uploaded the opening balance  quantity in J_2IRG1BAL table in OP_CF and OP_FINISH column.
    I am fetching quantity manufactured, quantity sold, relevant excise duties are from J_1irg1 table
    Now the problem is opening balance column is not showing values plantwise , values should get fetched from  J_2IRG1BAL table,if i go to that table , opening balance column is maintained.
    Please suggest me where exactly  to fetch the correct opening balance and closing balance to complete the report
    With regards,
    Hitesh

    Hi Himavanth,
    Thanks for reply.
    As you said i have to update table fields like client, excise group, Entry date, material, packed form P or L & fill the last columns user name, date, time but i cannot maintain it for same material for same date in both plants as date and material is key field in table J_2IRG1BAL.
    and i have found one note 1673612   in this note they have mentined following procedure for RG1.
    How to main opening balance for RG1 material?
            For an RG1 material the initial balance should be maintained  in the table J_2IRG1BAL.
       For a new RG1 material say that is created on 01.03.2012. If the  initial stock that is available is 100 KG and the transactions for   the material say like Receipt/Issue has happened from 22.03.2012,   then the initial balance of 100 KG should be updated in J_2IRG1BAl   table with DATUM 22.03.2012.That is the opening balance should be updated with date on which
       the actual transaction has happened for the material and not on  the material creation date.
      In J_2IRG1BAL table the following fields SHOULD be filled-
    EXGRP
    DATUM
       MATNR
       FORM
       OP CF
       OP FINISH
    OP FN UOM
       Also refer the note- 951955
    please suggest.
    Regards-
    Hitesh

  • Error in creating Table Maintenance for TABLES: J_2IRG1BAL ,Dump error show

    Dear Gurus
    I have Created one Table Maintenance for TABLES: J_2IRG1BAL ,
    1) I have take function group as same as table name like J_2IRG1BAL
    3) Authorization Group  &NC&
    4) Authorization object S_TABU_DIS
    5) Function group  J_2IRG1BAL
    6) Package J1I5
    7) Maintenance type one step.
    8) Maint. Screen No.    Overview screen 2009.
    9) Recording routine STD recording routines .
    I have assign screen single screen 1 but it will not take the screen so ill put screen 2009 ,the system will not not accept the screen but I proposed to Save and activate the table maintenance generator  and created and save the function group ,the table is ready to save the entries
    We have to go to SM30 then put 4-5 entries ,after that a dump error shows
    Which i have attachéd in this mail kindly help me out
    Its effect in production server.
    I have found that the error is given below I have mentioned all the details
    Kindly read this 
    I have created function group J_2IRG1BAL and  assign Package J1I5 and function group,J1I5 is already a Function group so problem occurs a dump error message displays
    Kindly give me the right solution all the Clients are effected
    110,100 150,250 these all are effected development clients
    300 is prod client this is also affected  because I have created a table maintenance generator and send the req to production .
    *Dump Error Shows in Production*
    Runtime Errors         SYNTAX_ERROR
    Date and Time          11.12.2008 09:26:30
    What happened?                                                                               
    |    Error in ABAP application program.                                                                               
    Error analysis
    In program "SAPLJ1I5 ", the following syntax error occurred:
    "The program "SAPLJ1I5" is not Unicode-compatible, according to its pro"
    "gram attributes."
    The current ABAP program "SAPLSVIM" had to be terminated because one of the
    statements could not be executed.
    This is probably due to an error in the ABAP program.
    In program "SAPLJ1I5 ", the following syntax error occurred
    in the Include "SAPLJ1I5 " in line 0:
    "The program "SAPLJ1I5" is not Unicode-compatible, according to its pro"
    "gram attributes."
    rigger Location of Runtime Error                                                                 |
    Program                                 SAPLSVIM
    Include                                 LSVIMU01
    Row                                     107
    Module type                             (FUNCTION)
    |    Module Name                             VIEW_MAINTENANCE 
    Author and last person to change the Include are:
    Author "TTLABAP2 "
    Last changed by "TTLABAP2 "                 
    105
    Initialisierung des Abgleichsmandanten zum View                     *
    106
    >>>>>
    vim_default_upgr_clnt-viewname = x_header-viewname.
    108
    vim_default_upgr_clnt-client   = client_for_upgrade.
    109
    PERFORM vim_set_global_field_value IN PROGRAM (fpool)
    |  110|            USING 'VIM_DEFAULT_UPGR_CLNT' 'C' vim_default_upgr_clnt rc.

    I have send you all the details regarding the table maintenance generator
    error is shown below
                                           I have Created one Table Maintenance for TABLES: J_2IRG1BAL ,
    1) I have take function group as same as table name like J_2IRG1BAL
    3) Authorization Group  &NC&
    4) Authorization object S_TABU_DIS
    5) Function group  J_2IRG1BAL
    6) Package J1I5
    7) Maintenance type one step.
    8) Maint. Screen No.    Overview screen 2009.
    9) Recording routine STD recording routines .
    I have assign screen single screen 1 but it will not take the screen so ill put screen 2009 ,the system will not not accept the screen but I proposed to Save and activate the table maintenance generator  and created and save the function group ,the table is ready to save the entries
    We have to go to SM30 then put 4-5 entries ,after that a dump error shows
    Which i have attachéd in this mail kindly help me out
    Its effect in production server.
    I have found that the error is given below I have mentioned all the details
    Kindly read this 
    I have created function group J_2IRG1BAL and  assign Package J1I5 and function group,J1I5 is already a Function group so problem occurs a dump error message displays
    Kindly give me the right solution all the Clients are effected
    110,100 150,250 these all are effected development clients
    300 is prod client this is also affected  because I have created a table maintenance generator and send the req to production .
                                                                                    Runtime Errors         SYNTAX_ERROR
    Date and Time          11.12.2008 09:26:30
    ShrtText
    Syntax error in program "SAPLJ1I5 ".
    What happened?
    Error in ABAP application program.
    The current ABAP program "SAPLSVIM" had to be terminated because one of the
    statements could not be executed.
    This is probably due to an error in the ABAP program.
    In program "SAPLJ1I5 ", the following syntax error occurred
    in the Include "SAPLJ1I5 " in line 0:
    "The program "SAPLJ1I5" is not Unicode-compatible, according to its pro"
    "gram attributes."
    Author and last person to change the Include are:
    Author "TTLABAP2 "
    Last changed by "TTLABAP2 "
    Error analysis
    In program "SAPLJ1I5 ", the following syntax error occurred:
    "The program "SAPLJ1I5" is not Unicode-compatible, according to its pro"
    "gram attributes."
    Trigger Location of Runtime Error
    Program                                 SAPLSVIM
    Include                                 LSVIMU01
    Row                                     107
    Module type                             (FUNCTION)
    Module Name                             VIEW_MAINTENANCE
    Source Code Extract
    Line
    SourceCde
    77
    TRANSPORTING NO FIELDS.
    78
    IF sy-subrc NE 0.
    79
    SELECT SINGLE * FROM tfdir WHERE funcname EQ <function_name>.
    80
    IF sy-subrc NE 0.
    81
    RAISE no_editor_function.
    82
    ELSE.
    83
    length = strlen( function_name1 ).
    84
    ASSIGN function_name1(length) TO <function_name>.
    85
    SELECT SINGLE * FROM tfdir WHERE funcname EQ <function_name>.
    86
    IF sy-subrc NE 0.
    87
    RAISE no_database_function.
    88
    ENDIF.
    89
    ENDIF.
    90
    INSERT x_header-viewname INTO alr_checked_views INDEX sy-tabix.
    91
    ELSE.
    92
    length = strlen( function_name1 ).
    93
    ASSIGN function_name1(length) TO <function_name>.
    94
    ENDIF.
    95
    96
    Initialisierung der RFC-Destination zum View                        *
    97
    98
    FPOOL+4 = X_HEADER-AREA.
    99
    fpool   = x_header-fpoolname.
    100
    vim_default_rfc_dest-viewname = x_header-viewname.
    101
    vim_default_rfc_dest-rfcdest  = rfc_destination_for_upgrade.
    102
    PERFORM vim_set_global_field_value IN PROGRAM (fpool)
    103
    USING 'VIM_DEFAULT_RFC_DEST' 'C' vim_default_rfc_dest rc.
    104
    105
    Initialisierung des Abgleichsmandanten zum View                     *
    106
    >>>>>
    vim_default_upgr_clnt-viewname = x_header-viewname.
    108
    vim_default_upgr_clnt-client   = client_for_upgrade.
    109
    PERFORM vim_set_global_field_value IN PROGRAM (fpool)
    110
    USING 'VIM_DEFAULT_UPGR_CLNT' 'C' vim_default_upgr_clnt rc.
    111
    112
    set flag if complex selection conditions in sellist                  *
    113
    114
    IF complex_selconds_used NE space.
    115
    READ TABLE dba_sellist INDEX 1.
    116
    IF sy-subrc EQ 0 AND dba_sellist-cond_kind EQ space.
    117
    dba_sellist-cond_kind = 'C'. MODIFY dba_sellist INDEX 1.
    118
    ENDIF.
    119
    ENDIF.
    120
    121
    direkter Vergleich: Flagge setzen usw.                              *
    122
    123
    IF view_action EQ vim_direct_upgrade.
    124
    view_action = aendern.
    125
    PERFORM vim_set_global_field_value IN PROGRAM (fpool)
    126
    USING 'VIM_SPECIAL_MODE' 'C' vim_direct_upgrade rc.

  • Regarding entering data in Table J_2IRG1BAL

    Hi SAP Gurus,
    While I tried to enter data into table J_2IRG1BAL through  Menu->Utilities->Table->contents->Create Entries
    The following Error is displayed .
    error : Create data processing function module
    Message no. SV023
    Diagnosis
    You have called the function for editing view contents. The function modules needed for the maintenance functionality of this view are not available in the system.
    Procedure
    The data processing function module must be re-generated.
    Contact the system administration.
    Plz Help!
    Reagrds Pavan.

    Hi Pavan,
    Have a look at this OSS Notes
    I thnk u need to regenrate the function module using SAP Note .Chk the following whether it will be useful or not.
    Note 316683 - V_T778Q: Create data processing function module
    Note 849858 - OT: Create data processing function module error -T558E.
    Try a search for OSS Notes in Service market place with messages which u have got.
    Regards,
    Lakshman.

  • RG1 Table - CIN ( Table - J_2IRG1BAL )

    Dear All,
    Can you please inform me meaning of 2 fields in the table J_2IRG1BAL?
    OP_CF & OP_FINISH
    From the name, it appears both are opening stocks in qunatity. If it is so, what is the difference between these two? The Data populated for these 2 fields is also different.
    I am sure SAP would not provide 2 fields for the same purpose.
    Regards
    Nikhil

    Initial RG1 Updation:
    The sequence is like this:
    1. In SE16, enter Table name: J_2IRG1BAL, and click on Create. Enter the material Number and 'P' in Material form (Loose/Pack indicator) and click 'Save'. This step is to be done only for the first time.
    2. Do your Initial Stock entry in MB1C, movement type 561
    2. Go to J1I5, select Posting Date, Document Year and 'ROP in Classification (Receipt from outside under any other provision). Click on Create icon (Register entry)
    4. Go to J2I5 and extract the RG1 Register. You must get a green checkmark.
    5. After doing the PFI, go to J1I5, select Posting Date, Document Year and Classification 'IDH' (For domestic sales) or 'IDE' if the first removal is for Export Sale. Based on the accounting document generated during PGI (MB03) the RG1 Register gets updated with the removal for Outbound Delivery.
    6. Reextract the RG1 register in J2I5. You must get a green checkmark.For the RG1 Register printout, go to J2I6, select the option, 'Script Form' and hit 'Execute.
    All this was in OSS Note: 373001.
    Regards
    Rajesh Banka

  • Error : J_2IRG1BAL, Create data processing Function module

    Sap Experts,
    when i go to se11 in which have given table name: J_2IRG1BAL, than i gone menu bar click on utilities select the table contents
    click on create entries button.
    1) Error Message : Create data processing function module
    2) This table Relevant to RG1 Updation
    3) Due to this error I am not able to upload the opening stock of finished material manuaaly
    4) What are the actions need to be done to rectify the above error.
    Regards,
    Prabhakar

    Hi
    Ask your ABAPER to create the maintainence view of the table
    regards
    Sanil Bhandari

  • On Android 4.2.2 on a Nexus7 tablet - No Firefox button and most text entry fields do not work at all

    I installed Firefox 19.0.2 and appears to be ok, but I don't see a Firefox button anywhere, so I cannot access any of the functions that it controls, such as bookmarks, which is why I installed it!
    The ASUS Nexus 7 tablet shows up as a supported platform.
    I set it as the default link browser, but quickly realized that I could not enter text into any data entry fields, so I reset the default back to Chrome, which works fine for that.
    I installed Firefox because bookmarks in Chrome are very lame, but I can't use bookmarks at all in Firefox, so again Chrome wins.
    Any suggestions, before I uninstall it?

    I am now a Democrat supporter. dccc.org does accept text input from my mobile.
    The forum problem I mentioned earlier is apparently a known issue but only affecting legacy phones.

  • Options - Text Editor - C/C++ missing intellisense entry. Intellisense not working

    Options -> Text Editor -> C/C++ missing intellisense entry.  Intellisense not working.    Solutions to turn options for the editor off and on are not working.  The intellisense entry is present for other languages,
    such as C#, but not C/C++.
    By not working, I mean the intellisense right click menu items are grayed out, and intellisense files are not produced.

    Hi JerroldBrody,
    Thank you for posting in MSDN forum.
    >>I mean the intellisense right click menu items are grayed out, and intellisense files are not produced.
    Based on your issue, could you please share me a screen shot about the intellisense right click menu items are grayed out?
    Generally, I know that it is default that we can enable the intellisense for C/C++ by going to the TOOLS->Options -> Text Editor -> C/C++ ->Advanced-> IntelliSense like the following screen shot.
    So please try to check if you set Disable Intellisense property as False in the VS IDE.
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • My new icloud acct on my imac is duplicating entries in calendar from my ipad; how do I get rid of the duplicates and how do I get one calendar to be the main one to start with

    I've just installed Mavericks on my iMac and now my calendar has duplicate and now sometimes tripled events by syncing with my ipad mini regardless of whether the item already existed in the iMac calendar already. How do I remove the duplicates? It was being able to sync calendars and contacts which was one of my reasons for moving from Snow Leopard to Mavericks and now it's a mess.

    Crista70, What is happening is you now have 2 calendars with the entries in them. If you go into View, then Show Calendar List, you will see all your calendars. Uncheck the ones listed as "From My Mac" or uncheck the ones listed as "iCloud" and they will no longer show as duplicates. Personally, I prefer unchecking the "From My Mac" calendars so that my calendars are all synced across the devices.

  • How to delete the entries in the given field box

    Hi Every One,
    How can I delete the entries which I have given in example SE37 box.
    When I press Backspace button the entries which I have given will appear so I want to delete these entries.
    With Regards,
    Venkat

    Hi,
    Goto ==> Customize Local Layout (Alt + F12) , then Options ====> LocalData=======> Clear History
    This process should clear your history.

  • ICal only displays a single line for entries in month view.

    This means I can't see what my diary entries refer to.  Can I change it to show two lines or the full entry, as iCal did in Snow Leopard?

    Hi Guys, thanks for getting back to me.
    the problem is purely about design view display and not about coding.
    Below is how CS4 displays borders with two lines which I find difficult to decipher:
    Then below is Macromedia DM 8 and this how I want the borders to look, with single lines to display the tables.
    This may just be the way Abobe have decided to display tables in design view and there may not be any option to change it but if you know any way to change it I would be most greatful.
    Thanks again.
    G

  • I'm not able to create a iphoto calendar with the correct birthday entries.

    Hello,
    I use the latest Iphoto version and OS X 10.9.
    I tried to create a calendar in iphoto that includes all birthday information of my family. Unfortunately I'm not able to do this.
    I tried two differnt ways to get the information into the calendar.
    First of all I' tried to use the option of the calendar to get the information of my contacts and it partly worked. Some dates were missing and I was not able to modify or add additional birthdays in the calendar. I checked my contacts and the information was there but not shown in the Iphoto Calendar.
    Therefore I have to get the information into the calendar in a different way. For that I created a new calendar in ICal and created for each Birthday entries.
    I select the option in the Iphoto calendar to show the new calendar in iPhoto. But the result was worse than with the first solution. Only few entries was shown in the calender.
    Do anybody have an idea how can I solve this issue.
    Thank you in advanced,
    Philipp

    First of all I' tried to use the option of the calendar to get the information of my contacts and it partly worked. Some dates were missing and I was not able to modify or add additional birthdays in the calendar. I checked my contacts and the information was there but not shown in the Iphoto Calendar.
    Do the birthdays (from Contacts) show correctly in the Calendar app? Sometimes there is a formatting problem with the date string in the Contacts. If the Birthdays do not show correctly in the Calendar.app, try to delete them from Contacs and enter them again, and check, if they now are showing correctly in Calendar. Quit both Contacts and Calendar.
    Then restart iPhoto, and in the "Settings" for your Photo Calendar disable the Birthdays option, and then turn it on again.
    Any changes you do to the birthdays in Contacts may only appear in iPhoto Calendars after Calendar or Contacts wrote their databases, and iPhoto will read these databases, when you enable the "Birthdays" option. Toggling this option on and off will ensure, that the new Contacs info will be read.
    -- Léonie

  • Is there a way to add event details using a calendar object vs. those dumb field entry boxes?

    I have switched from PC to Mac over a year and a half ago, and have been plagued with the "dumb" date entry boxes in iCal and now Reminders on the mac. For one, they don't show you the DAY OF WEEK for an event, it assumes you are parked on that day, but of course reality sets in and causes constant date changes for events. Picking a date in the future would be much more helpful if Apple followed some usability norms in iCal. For instance, if you are booking a flight online, those helpful little calendar objects pop up, and further, they are smart about "end dates and times" for events, knowing it can't be earlier than the start date. Apple iCal unfortunately always thinks you are creating an ALL DAY event, and when you change the start time, it creates the end time for the next day. Not very smart. Or is it me that is not very smart for constantly hawking every little data entry field for correctness. Why, oh why dear lord has Apple not given some usability attention to iCal on the mac??? At least match the interface of the iPhone with a nice little slot machine rolling control.
    Is there an add in?
    Is there hope that Apple will ever fix its lagging Mail and iCal apps on the Mac?
    Please advise. Or just offer a kind word of consolation if there is no hope for a better interface.

    In the future, Swing related questions should be posted in the Swing forum.
    The code you posted is of little use since it uses custom classes so we can't see the behaviour of your code.
    In general if you add a component to a Container at run time then you just use
    container.revalidate()
    This will invoke the LayoutManager and repaint the components in the container based on the new layout.

Maybe you are looking for