Entry List issue

Hi,
i have created an entry list element on the sales organization charecteristic from a bw report....i used the below procedure t odo that...
1)Create a form from the input port of query
2)Removed all other fields in the form and created a new field( drop down list)
3)Double click on “ Field” to configure “Control properties” and Select “Dynamic” Radio button” in the Pop Up Window
4)In the pop up window, navigate to the characteristic which is to be used as data service to the “Entry List”
5)Configure Input and output Port assigned values
6)Click on “Action” Tab, select “System action” Radio Button” and select “Submit form” for the “System action” field.
7)Add a table view to the query
But when i see the iview for the first time( only for the first time) iam getting the list of sales organizations in the drop down list...
Is the issue about the query in BW, or the input- output port assigned values, or system action...
Thanks & Regards,
P.Navakanth.

Hi,
you say that the values are displayed for the first time. What happened later? Is the dropdown empty? Did you check the falsh debugging console? - When is the dropdown populated and what happened after poulating?
Best Regards,
Marcel

Similar Messages

  • Flex Table Add Row Issue with Dynamic Entry Lists in Visual Composer

    All,
    Your help would be kindly appreciated in resolving an 'Add Row'-issue within a Flex Table that uses Dynamic Entry Lists in Visual Composer. The issue here is as follows :
    When I use a [Local Dynamic Entry List |http://www.postyourimage.com/view_image.php?img_id=O5hrG2aMxWZ84Mu1211193041]to populate a row field, the initial row and all next rows are emptied upon 'insert row', they loose their selected values and also the entry list values ('pull-down menus') are lost. Please also see [screenshot|http://www.postyourimage.com/view_image.php?img_id=FPLr2cABcgiHRou1211192889].
    The initial row does [show the entry list values |http://www.postyourimage.com/view_image.php?img_id=2HybmEHAuQYs9cg1211192766]from the Local Dynamic Entry List based on the dynamically assigned input value; upon 'insert row' the entry lists are lost. Please also see [screenshot|http://www.postyourimage.com/view_image.php?img_id=FPLr2cABcgiHRou1211192889].
    When using a [Global Dynamic Entry List |http://www.postyourimage.com/view_image.php?img_id=m5p2KYuBb442dTq1211193501]to populate the row fields the Flex-table behaves normally as expected. Unfortunately with a Global Entry List it is not possible to dynamically assign a input value. Please also see [screenshot|http://www.postyourimage.com/view_image.php?img_id=U96V0zENCCyO3gA1211193157].
    Please also see the [issue summary image|http://www.postyourimage.com/view_image.php?img_id=06xti08tIEfely1211195178] I made to visualize the issue.  What I basically would like to know is whether this is a 'known issue' or not, or that it is an issue that can be fixed or whether there is an alternative workaround available ... I'm using Visual Composer 7.0 and the Portal is at SP 13.
    Many thanks,
    Freek

    Hi,
    you should be able to assign a dynamic value with global entry lists as well. If you say @myParam as dynamic value. VC will indicate in red letters, that the field @myParam is unknown. However, it will work, as long as @myParam is known in the form or table where you use the entry list.
    I have never heard of the problem that entry lists are emptied after "insert"-event.
    Kindes Regards,
    Benni

  • Flex Table Add Row Issue with Dynamic Entry Lists

    All,
    Your help would be kindly appreciated in resolving an 'Add Row'-issue within a Flex Table that uses Dynamic Entry Lists in Visual Composer. The issue here is as follows :
    When I use a [Local Dynamic Entry List |http://www.postyourimage.com/view_image.php?img_id=O5hrG2aMxWZ84Mu1211193041]to populate a row field, the initial row and all next rows are emptied upon 'insert row', they loose their selected values and also the entry list values ('pull-down menus') are lost. Please also see [screenshot|http://www.postyourimage.com/view_image.php?img_id=FPLr2cABcgiHRou1211192889].
    The initial row does [show the entry list values |http://www.postyourimage.com/view_image.php?img_id=2HybmEHAuQYs9cg1211192766]from the Local Dynamic Entry List based on the dynamically assigned input value; upon 'insert row' the entry lists are lost. Please also see [screenshot|http://www.postyourimage.com/view_image.php?img_id=FPLr2cABcgiHRou1211192889].
    When using a [Global Dynamic Entry List |http://www.postyourimage.com/view_image.php?img_id=m5p2KYuBb442dTq1211193501]to populate the row fields the Flex-table behaves normally as expected. Unfortunately with a Global Entry List it is not possible to dynamically assign a input value. Please also see [screenshot|http://www.postyourimage.com/view_image.php?img_id=U96V0zENCCyO3gA1211193157].
    Please also see the [issue summary image|http://www.postyourimage.com/view_image.php?img_id=06xti08tIEfely1211195178] I made to visualize the issue.  What I basically would like to know is whether this is a 'known issue' or not, or that it is an issue that can be fixed or whether there is an alternative workaround available ... I'm using Visual Composer 7.0 and the Portal is at SP 13.
    Many thanks,
    Freek

    Hi,
    you should be able to assign a dynamic value with global entry lists as well. If you say @myParam as dynamic value. VC will indicate in red letters, that the field @myParam is unknown. However, it will work, as long as @myParam is known in the form or table where you use the entry list.
    I have never heard of the problem that entry lists are emptied after "insert"-event.
    Kindes Regards,
    Benni

  • LOCK Entry List

    Hi Experts!
    Is it OK if SM12's "LOCK Entry List" looks like as follows:
    Some tables are appearing at least twice ore more with the lock mode E.
    Is it acceptable.
    Please give me a hint, is it possible that such a scenario may cause
    an error output
    Some of the selected &1 are being processed
    *see se91
    Error Type: E
    Id: C$
    Message Number: 162
    Thanks
    sas erdem
    011     Thealy     21:19:47     E     CCIHT_ACH     01100000000000000153354####################     1     0
    011     Thealy     21:19:47     E     CCIHT_IP     01100000000000000153325####################     1     0
    011     Thealy     21:19:47     E     CCIHT_IPEVA     01100000000000000153326####################     1     0
    011     Thealy     21:19:47     E     ESTDF     01100000000000000153354####################     1     0
    011     Thealy     21:26:00     E     CCIHT_IAL     01100000000000000153354####################     1     1
    011     Thealy     21:26:00     E     CCIHT_IHVA     01100000000000000153354####################     1     1
    011     Thealy     21:26:00     E     CCIHT_IP     01100000000000000153354####################     2     1
    011     Thealy     21:26:00     S     KSSKX     011100YXE_RET_MAL_0010  O0000000000000015355700000000000000004348     0     3
    011     Thealy     21:26:00     S     KSSKX     011100YXE_RET_MAL_0089    O0000000000000015355800000000000000004349     0     3
    011     Thealy     00:38:27     E     CCIHT_IP     01100000000000000153325####################     1     0
    011     Thealy     00:38:27     E     CCIHT_IP     01100000000000000153354####################     1     0
    011     Thealy     00:38:27     E     CCIHT_IP     01100000000000000153358####################     1     0
    011     Thealy     00:38:27     E     CCIHT_IPEVA     01100000000000000153326####################     1     0
    011     Thealy     00:38:27     E     CCIHT_IPEVA     01100000000000000153375####################     1     0
    011     Thealy     01:16:56     E     CCIHT_ACH     01100000000000000153015####################     1     1
    011     Thealy     01:16:56     E     CCIHT_IAL     01100000000000000153015####################     1     1
    011     Thealy     01:16:56     E     CCIHT_IHVA     01100000000000000153015####################     1     1
    011     Thealy     01:16:56     E     CCIHT_IP     01100000000000000153015####################     2     1
    011     Thealy     01:16:56     E     CCIHT_IPEVA     01100000000000000153016####################     2     1
    011     Thealy     01:16:56     E     CCIHT_IPEVA     01100000000000000153017####################     2     1
    011     Thealy     01:16:56     E     CCIHT_IPEVA     01100000000000000153018####################     2     1
    011     Thealy     01:16:56     E     ESTDF     01100000000000000153015####################     1     1

    There can be 2 entries in SM12 for same table. But if you check the record which is locked, it will be different.
    There can be row level locks on tables.
    If you are trying to edit the 'record' of a table listed in SM12, which is locked, then it should give an error.
    Try accessing some other record of the same table, it should not cause any issue.

  • How to create a dynamic entry list for an input field in VC(ce 7.1)

    Hello all,
    I have an Input field, i need to create a Dynamic Entry List for it in VC(ce 7.1).
    How can this be done.
    Thanks in Advance.
    Thanks and Regards,
    Santhosh Guptha N

    Hi Santhosh,
    You can define Dynamic entry list for Drop down list and combo box but not for input field.
    [Refer this|http://help.sap.com/saphelp_nwce10/helpdata/en/2a/28249060dd4dbc872f6266f4557364/frameset.htm] for defining entry list.
    Let me know if it helped.
    Regards,
    Dharmi

  • Changing the Entry list title in Combo box

    Hi,
      i want to give title for the entry list displayed in Combo box.but itz displaying some default title "Extended value selector".is there anyway to remove this? please help me.
    Thanks,
    Priya

    Hi Shai,
         Thanks for ur reply.please let me know if there is a way to do that.
    Regards,
    Priya

  • Distribution List issue

    Hello,
    Since our upgrade to GW 8 users can no longer administer Distribution Lists. I have created a new test list and made myself administrator to verify this. I can add the members to the list but when I save and close they are not added to the list. We are running 8.02 with most current build (91941)on agents and clients. Do I need to run some kind of PO repair?
    Thanks in advance.

    Hmm, weird although I'm have a weird dist list issue also in that some are disappearing from users' address books. Sometimes they'll show back up if I refresh the address book from the system book but often not. I'll submit a new post on that one; it's possible they're related.
    >>> csupers<[email protected]> 1/24/2011 7:06 AM >>>
    These are all regular c/s connections, very few of our users (maybe 10)
    using caching. We had implemented this before we went to 8 and it was
    working fine, now it's broke.
    David Hickok;2066477 Wrote:
    > How are they trying to administer them? If your users are in caching
    > mode, they need to use to address book applet. Otherwise, you'll
    > experience the problem you described.
    >
    > >>> csupers<[email protected]> 12/1/2010 8:06 AM >>>
    >
    > Hello,
    >
    > Since our upgrade to GW 8 users can no longer administer Distribution
    > Lists. I have created a new test list and made myself administrator to
    > verify this. I can add the members to the list but when I save and
    > close
    > they are not added to the list. We are running 8.02 with most current
    > build (91941)on agents and clients. Do I need to run some kind of PO
    > repair?
    >
    > Thanks in advance.
    >
    >
    > --
    > csupers
    > ------------------------------------------------------------------------
    > csupers's Profile: 'View Profile: csupers - NOVELL FORUMS'
    > (http://forums.novell.com/member.php?userid=1482)
    > View this thread: 'Distribution List issue'
    > (http://forums.novell.com/showthread.php?t=427148)
    csupers
    csupers's Profile: http://forums.novell.com/member.php?userid=1482
    View this thread: http://forums.novell.com/showthread.php?t=427148

  • Dynamic entry list used in a table column

    On a form, we noticed a dynamic entry list will limit which values a user may enter by validating against the entry list values.  We need to have the same validation occur when a dynamic entry list is used in a table column. Has anyone had success in getting the dynamic entry list to validate the cell values in a table column?

    Hey Dan,
    You are right.... Its a bug... we are also using VC CE 7.1 SP 05....
    When I try in form (with combo box) its working fine...I mean its giving error saying "Character string "4" does not exist in the allowed set of values and its not forwarding any values...
    but when I use it in table, its not giving any error.
    I saw some demos where it was working fine... but those are older sp versions of CE 7.1...
    Try to contact SAP VC team on this....
    PradeeP
    Edited by: pradeep bondla on Oct 6, 2010 12:06 AM

  • Dynamic entry list in Dropdown List Box

    Hi All,
    I need to create a dropdown box in a form whose input is connected to the output of a bapi/query. I want the values of a field in the bapi to the elements of the entry list.
    Can anyone tell me how to create the entry list dynamically?
    Thanks,
    Sruti

    Hi,
    Create Drop-Down List in VC
    Go throgh this links...
    http://help.sap.com/saphelp_nw04s/helpdata/en/96/c33a3382914f6d8aeba11413e3e356/frameset.htm
    Web blog
    /people/thomas.jung/blog/2006/05/26/visual-composer-value-help-data-service
    Referece Guide
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9326072e-0c01-0010-bc97-f72e93338101
    and
    http://help.sap.com/saphelp_nw04s/helpdata/en/bf/39becc90824d4d999eb05336345e5e/frameset.htm
    Senthil K.

  • Measuring Point Entry List

    Hi,
    I need the transaction code to entry measuring point entry list.
    I created in IK31 and created Entry list name:as XXXX.
    But In which Transaction i enter the readings of different equipments Measuring points?
    Plz help me.
    Regards,
    Chitra.

    Hi,
    There are three options to craete measuring entry sheet.
    1.Equipment Measuring Entry sheet.
    2.Function location Measuring Entry sheet.
    3.General Measuring Entry sheet.
    For entring measrement documents u can use IK34.
    Ramesh

  • Drop-Down Dynamic entry list

    Hi,
    I use a drop-down list in a form view and I would like to use a dynamic entry list from a characteristic (0SALESORG) of a bi query. But the obtained list is empty.
    I am in BI 70 SP 10.
    Regards
    Jacques

    Hi Jacques,
    as Mario mentioned check the permissions. Visual Composer is a tool with "Zero Programming", but you need data services resp. services for doing sth. in backend resp. the business logic. There are several services from the SAP available, but these services can not cover all your requirements.
    In my case I wrote an ABAP RFC for displaying the master data. This service also enables to search for certain master data of an infoobject (you can search with * in texts) and language depended. I need this RFC for one of our products.
    As I wrote in my first blog, the combination of ABAP RFCs (Java Webservices) and VC is a powerful tool to realize business application in a fast way. I think SAP is on a good way to eSOA.
    Best Regards,
    Marcel

  • Java Web service and dynamic entry list

    Hello,
    In my VC mode, I have a combo box with a dynamic entry list. This entry list call a web service function which the source is :
    public EntryListBean[] getEntryList() {
              EntryListBean[] liste = new EntryListBean[2];
              liste[0] = new EntryListBean();
                    liste[0].setText("1");
              liste[0].setValue("Liste 1");
              liste[1] = new EntryListBean();
                    liste[2].setText("2");
              liste[1].setValue("Liste 2");
              return liste;
    In output port, i have:
    VALUE -
    > @value
    TEXT    -
    > @text
    When i test this function with 'Test Data Service', it work but when i deploy the model, there is nothing in the combo box. Do you have the same problem ?
    I have installed NWDW v7.0 SP9 with Visual Composer patch 2.
    Regards

    Hi Francois,
    Did u try using dynamic entry list with a BAPI. Is that working fine?
    Actually, I faced the same problem. I used a drop-down list, in which dynamic entry list works fine in case of a BAPI and appears blank in case of a webservice. I applied the latest patch files mentioned in a SAP note. People in forum asked me to do that. Its mentioned in the note that, "Dynamic entry list with webservice bug is fixed in the released patch file". But even after applying the latest patch files, it did not work for me. So, i think this bug is yet to be fixed.
    Regards,
    Kavitha.

  • Dynamic Entry List in VC

    Hi All,
    I am using VC7 SP09.Is it possible to create dynamic entry list in Visual composer for BAPI/JDBC system?
    Regards,
    Hema

    Hema,
    dynamic entry list for BAPI is supported in sp09, but for jdbc systems its supported as of sp13.
    prachi

  • Entry List: I need input dynamic

    I need that the vale input for a Dynamic entry list are anohter field. When I select this field in the Dynamic entry List, they show a message: "this.diagram" is null
    I can compile but they not running.
    How can I assign the input value form anhoter filed?
    Thank you.

    Hi.
    If I understand correctly - you are trying to dynamically provide values in a control based on the change of values in another control.
    An option to achieve this is to create several controls of the same and bind their vaules dynamically, however only display the one you need when a condition is met. A way of achieving this is to set the gaurd conditions for your trigger control to prefill dynamically when met thus reducing unncessary calls or prefills of values.
    Hope this helps.

  • Dynamic Entry List

    Hi,
    I want to use "dynamic entry list" to populate my drop down lists in VC screens. I need to do this through web services.
    when i populate my drop down lists by using a BAPI, its working fine. Where as while using a web service system, its showing blank output. The web service when tested without mapping to drop-down list is showing output in VC.
    Have any of you tried this before?Please post your experinece/ new ideas.
    Thanks in advance,
    Kavitha.

    Hi Kavitha,
    we are facing a similar problem with BI Queries.
    If you use SP10 this note might help:
         Note 1009081 - dynamic entry list does not work for BI Queries
    It is a problem error in flex compiler introduced in NW04S SPS10, it works fine in SPS9 and before.
    Regards,
    Lars

Maybe you are looking for