Entry missing in Integration Engine (sxmb_moni)

Dear all,
We have a Synchronous scenario from SAP ECC --PI -- Database.
A synchronous outbound proxy is trigeered at EC to send some data to PI and from PI to Database.
We are not able to find an entry in PI-SXMB_MONI.Where as , wer are able to see a enty in Adapter Engine, but when we try to view the messages, it says "Content of message deleted to save memory"
On the whole, we don't see any entry in sxmb_mnoi, but we have entries in RWB for the request and response flows. And as such there is no error for this interface in PI.
What could be the reason for this. Kindly share your thoughts.
Regards,
Younus

Any chance this didnt helped: Display Adapter Synchronous Message Content in RWB of PI 7.1
Similar setting needs to be done for lower versions in VA!
Regards,
Abhishek.

Similar Messages

How to find the IDOC for the archived message in integration engine

Hello experts
In my outbound scenario (Idoc to file), I have a message id got processed from integration engine (SXMB_MONI) but failed in adapter engine (RWB) on 1week back, The same message archive in SXMB_MONI but i found same message in adapter engine.
My question is how to find the archive message IDOC num
We can't find in adapter engine it will show only (sender service, receiver service and interface date and time as well and receiver structure in message content tab) but not idoc no,
Kindly provide the solution for the issue, Is there any alternative to find the idoc?
I can search with partner in sap side but i can get lot of idoc's
Thanks & Regards
Rajashekar

> We can't find in adapter engine it will show only (sender service, receiver service and interface date and time as well and receiver structure in message content tab) but not idoc no,
>
> I can search with partner in sap side but i can get lot of idoc's
Hi,
If solution given by experts in above replies doesn't work then you can try below method.
What you can do is, take some unique values from message content tab (which came in some specific segment from IDOC)
Now in R3 use tcode WE09 and set the dates when this was processed. Set other filter criteria as much as possible e.g. direction, idoc basic type, port, partner etc and at the bottom you can "Fast search mode" their you give the segment name and it's value.
This will help you get you IDOC.
Regards,
Sarvesh

Entry missing in sxmb_moni

Hi,
My interface recived meeages through http and uses a BPM for some other synchronous calls in the flow.
We were testing negative test cases and asked the sender system to send a wrongly formatted message.
but the problem now is that a message that was sent by a third party to XI entered the BPM and i can see the entry in the transaction 'sxmb_moni_bpe' but where it failed (as expected) but when i try to see the corresponding entry in transaction 'sxmb_moni' i'm not able to.
It looks like the message hit the BPE but not the IE !
However this did not happen in the test environment. Could any one who has a suggestion or experienced similar cases help ?

Hi Bharath,
Please check both LOGGING & LOGGING_SYNC parameters configuration on both TEST and PROduction environments
baiscally these 2 or LOGGING_PROPAGATION parameter used to perform logging/tracing fuctionality globally of IE.
Parameter LOGGING or LOGGING_SYNC (category RUNTIME) to activate logging of asynchronous or synchronous messages locally for the whole Integration Engine. This means that all service calls of all pipelines of this Integration Engine are logged.
Parameter LOGGING_PROPAGATION (category RUNTIME) to activate logging globally. This means that message processing is logged until it is complete on all involved Integration Engines.
And also, check how these 2 parameters are configured TRACE_LEVEL, TRACE_LEVEL_PROPAGATION for category RUNTIME in both the environments.
Regards
Sekhar

How to retrive the old messages in sxmb_moni (integration engine)

Hi Expert,
We were trying to call RFC and send some messages through XI. Due to some connection issue the message was failed in integration engine(MONI). As this messages had failed last week. We are not able to see the messages in MONI.
Now we wanted to get the payload of the messages which had failed.
Can you please suggest how can we see those messages and get the payload which is now not visible in MONI.
Thanks in advance.
Thanks,
Nutan Champia.

Hi All,
Thanks for your response. I am able to see some messages in the mentioned table but I am not able to open those messages in MONI with the message id given in the table SXMSPMAST2 (SXMSPMAST) and SXMSPHIST to get the payload. (I have given date selection critaria as 1st of Nov 2011 till date). As this is very important for us would you please help us.
Hi Venkata Ramesh,
So if I have correctly understood you, then you mean to say that these messages which is not visible in moni we can not retrive the payload.
Would you please help me to understand where can we see the settings to mention the number of days for which these messages should appear in MONI. (So that we can increase or can see the current settings for our project)
Thanks
Nutan

HTTP error 403 from Integration engine

Hello,
Problem a)
While posing data from eSourcing to PI box by HTTP , we are getting HTTPerror 403.
The error message states:
ID: E-Sourcing was unable to publish PROP-00090--2010 to ERP. class java.io.IOException Server returned HTTP response code: 403 for URL:
Problem b)
In another observation the sender file adapter after polling the file is unable to send the message to Integration engine and gives a Connection Time out error. it gives the following error.
Transmitting the message to endpoint http://<Host>:<Port>/sap/xi/engine?type=entry using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error transmitting the message over HTTP. Reason: java.net.ConnectException: Connection timed out: connect.
I believe that both the errors are for common cause and possibly the Integration engine is not accepting HTTP request.
It looks like these error due to security reason, it seems some authorization profile is missing or may be some other issue,kindly help us at that front.
Thanks and Regards,
Satish

Hi Suraj,
Thanks for the update.We had checked the URL before posting this message,it is picking up correct URL with namespoace, UID and PWD.Exact error that we are getting is as follows:
ID: E-Sourcing was unable to publish PROP-00090--2010 to ERP. class java.io.IOException Server returned HTTP response code: 403 for URL: http://MB1ES1025:50200/sap/xi/adapter_plain?namespace=http://frictionless.esource.com/v2.0&interface=MI_ESI_AWARD_PO&service=FCI_TENANT&QOS=BE&sap-user=pisuper&sap-password=sap$29&sap-client=001&sap-language=EN. Please contact your system administrator.
Here all information are correct.We have checked the SLD check, that is also working fine.Also it is not connectivity related issue, as we are able to transmit XML file to E-Sourcing.
It looks like security issue, but what authorization needs tobe given exactly for HTTP call, we need to know or may be some other issue.
Thanks and Regards,
Satish

Integration Engine Issue - PI 7.0 !!

Hi Experts,
In sandbox we have 2 clients 020 and 030 .
We have configured 030 as PI integration engine .
We ran couple of scenarios . It worked fine . For configuring alerts i made few changes in Exchnage profile and instance profile .
In exchnage Profile for alerts :
1. I made entry of FQDN
2. Changed the client everywhere to 030 from 001 .
Now i was able to see alert inbox.
In instance profile at RZ10 :
1. I made the entry of FQDN .
surprisingly after all this when i ran the scenario it is showing client ID 020 in SXMB_moni in my messages . and on clicking it is saying integartion engine not exists . that is true as integration engine is with client 030 .
Please help me on this !!
Regards,

Hi Sanotsh,
If i understood properly, you want your PI default client to be used as 001 instead of 030.
I hope before u changed the default client from 001 to 030, you followed note 940309.
You can use the same to revert.
Revert if you still face issues.
Best Regards
Raghu

HTTP Response code 404 - RFC Adapter des not connect to Integration engine

Hi,
I seem to have problem with XI Integration engine. My integration process does not go beyond adapter engine and it fails with the following error,
Begining of the erorr report -
2006-01-23 13:35:53 Success RFC adapter received sRFC for ZSCEN2_XI from <sysno>/<client>. Attempting to send message synchronously
2006-01-23 13:35:54 Success Application attempting to send an XI message synchronously using connection AFW.
2006-01-23 13:35:55 Success Trying to put the message into the call queue.
2006-01-23 13:35:55 Success Message successfully put into the queue.
2006-01-23 13:35:55 Success The message was successfully retrieved from the call queue.
2006-01-23 13:35:55 Success The message status set to DLNG.
2006-01-23 13:35:55 Error Returning synchronous error notification to calling application: Received HTTP response code 404 : Not Found.
2006-01-23 13:35:55 Error Transmitting the message using connection http://<host>:55300/sap/xi/engine?type=entry failed, due to: Received HTTP response code 404 : Not Found.
2006-01-23 13:35:55 Error The message status set to FAIL.
2006-01-23 13:35:55 Error Returning to application. Exception: Received HTTP response code 404 : Not Found
end of error report -
and the runtime workbench does not connect to Integration engine and fails with the following error,
begin error report -
javax.ejb.CreateException: Unable to log on to system XID in language en with user XIRWBUSER
     at com.sap.aii.mdt.server.integrationengine.IntegrationEngineMonitoringBean.ejbCreate(IntegrationEngineMonitoringBean.java:374)
     at com.sap.aii.mdt.server.IntegrationEngineHomeImpl10.create(IntegrationEngineHomeImpl10.java:185)
     at com.sap.aii.mdt.server.IntegrationEngineHome_Stub.create(IntegrationEngineHome_Stub.java:56)
end of report -
Have anyone experienced the same issue?. Are we missing some post installation configuration?.
Thanks in advance
Regards,
Arul

HI Anulraja,
Your Adapter Engine searches the pipeline url of the integration engine from the SLD.
Check the Bussiness System in Sld , which you'll have defined for XI Server.
It should have ROLE : Integration Server And
pipeline url: http://ux0800:55300/sap/xi/engine?type=entry
should be this if your http port is 55300.
Check if this url is right in SLD-Bussiness System.
You can check the exact http port in transaction sxmb_adm.
Go to Integration engine configuration and then click on check icon(F7).
It should match with that provided in the BS in SLD.
By default it should be 8000.
Check all these things and then try.
Regards,
Yomesh

Error in integration engine prosessing

Hi
I am doing proxy to fille interface for testing purpose in RWB in integration engine i test message tab i have given proper entries and send the message.In SXMB_MONI intially status of flag is green i have registered the queues in sxmb_adm then status has changed to red i opened the message it is showing as follow.
In Moni in place of receiver service interface it is showing sender service interface.But i have configured correctly
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIProxy</SAP:Category>
<SAP:Code area="ABAP">INTERFACE_REGISTRATION_ERROR</SAP:Code>
<SAP:P1>ifmmessif</SAP:P1>
<SAP:P2>SI_PROXY_SENDER</SAP:P2>
<SAP:P3>urn:SESA:PROXY:FILE</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>No implementing class registered for the interface (ABAP interface, request message SI_PROXY_SENDER, request message, namespace urn:SESA:PROXY:FILE)</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Regards
Praveen

My problem was solved my R3 RFC destination was not pointing to client of integration engine.I have corrected the same my issue was solved
Regards
Praveen

No message reach into Integration Engine ...

Hello,
I have following problem. I send message to XI through SOAP adapter. But the message doesn't reach of Integration Engine. It is delivered into Adapter Engine and then it stays in status "Waiting". When open message detail in RWB I get these information:
Message Data
Attribute     Value
Engine     Adapter Engine
Status     Waiting
Repeatable     Yes
Cancelable     Yes
Start     29.08.2008 12:14:59
End     29.08.2008 12:14:59
+Sender Party     +
Sender Service     BS_GetSupperior
Sender Interface     http://sntcz.cz/xmlns/holidays
MI_Holiday
+Receiver Party     +
+Receiver Service     +
+Receiver Interface     +
Quality of Service     Exactly Once
Error Category     XI_J2EE_ADAPTER_XI_HANDLER
Error Code     GENERAL_ERROR
Message     55C9628075B311DDABE200301875333B
+Reference     +
... and in defaultTrace file occures this message:
#1.5#00301875333B0057000000DE0000109C00045596D2CD72D8#1220006176812#com.sap.aii.af.ra.ms.impl.core.queue.SendConsumer##com.sap.aii.af.ra.ms.impl.core.queue.SendConsumer.onMessage(QueueMessage, boolean)#J2EE_GUEST#0##srvbr05_NW4_2798750#XISUPER#18255d00759d11ddc1a500301875333b#SAPEngine_Application_Thread[impl:3]_31##0#0#Error##Java###Transmitting the message to endpoint using connection failed, due to: .#3#AFW#com.sap.aii.af.ra.ms.api.RecoverableException: Received HTTP response code 500 : Error during conversion of XI message#http://srvbr05:8000/sap/xi/engine?type=entry#
#1.5#00301875333B004B0000009D0000109C00045596D2CE9B64#1220006176890#com.sap.aii.messaging.srt.xmb.XMBWebServiceExtension#sap.com/com.sap.aii.af.soapadapter#com.sap.aii.messaging.srt.xmb.XMBWebServiceExtension#XISUPER#2919##srvbr05_NW4_2798750#XISUPER#ecff64f075af11dda90200301875333b#XI SOAP[BS_GetSupperior_SOAP/BS_GetSupperior/]_2449##0#0#Error##Plain###no message ID available#
#1.5#00301875333B0049000001270000109C00045596D3111C00#1220006181250#XIRWB.com.sap.aii.mdt.api.server.MessageMonitoringBean#sap.com/com.sap.xi.mdt#XIRWB.com.sap.aii.mdt.api.server.MessageMonitoringBean#XISUPER#2920##srvbr05_NW4_2798750##f03f74c075af11ddb4ce00301875333b#SAPEngine_Application_Thread[impl:3]_3##0#0#Error#1#/Applications/ExchangeInfrastructure/RuntimeWorkbench#Plain###enrichMessageData(): Error during retrieving the end-to-end-monitoring information
Thrown:
com.sap.aii.rwb.endtoendmonitoring.util.Sxmb_Get_Pmi_Info_Fault_Exception:
     at sun.reflect.GeneratedConstructorAccessor358.newInstance(Unknown Source)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:274)
     at java.lang.Class.newInstance0(Class.java:308)
     at java.lang.Class.newInstance(Class.java:261)
     at com.sap.aii.proxy.framework.core.JcoMarshaler.unmarshalException(JcoMarshaler.java:429)
     at com.sap.aii.proxy.framework.core.JcoProxy.send(JcoProxy.java:82)
     at com.sap.aii.proxy.framework.core.AbstractProxy$JcoProxyHelper.send(AbstractProxy.java:173)
     at com.sap.aii.proxy.framework.core.AbstractProxy.send$(AbstractProxy.java:141)
     at com.sap.aii.rwb.endtoendmonitoring.util.PMI_PortType.sxmb_Get_Pmi_Info(PMI_PortType.java:28)
     at com.sap.aii.mdt.api.server.MessageMonitoringBean.enrichMessageData(MessageMonitoringBean.java:965)
     at com.sap.aii.mdt.api.server.MessageMonitoringBean.setMessageList(MessageMonitoringBean.java:762)
     at com.sap.aii.mdt.api.server.MessageMonitoringBean.getPureMessageList(MessageMonitoringBean.java:568)
     at com.sap.aii.mdt.api.server.MessageMonitoringObjectImpl0.getPureMessageList(MessageMonitoringObjectImpl0.java:1016)
     at com.sap.aii.mdt.api.server.MessageMonitoring_Stub.getPureMessageList(MessageMonitoring_Stub.java:1772)
     at com.sap.aii.mdt.server.integrationserver.IntegrationServerMonitoringBean.getMessageList(IntegrationServerMonitoringBean.java:354)
     at com.sap.aii.mdt.api.server.MessageMonitoringBean.setMessageList(MessageMonitoringBean.java:744)
     at com.sap.aii.mdt.api.server.MessageMonitoringBean.getMessageList(MessageMonitoringBean.java:552)
     at com.sap.aii.mdt.api.server.MessageMonitoringObjectImpl1_1.getMessageList(MessageMonitoringObjectImpl1_1.java:657)
     at com.sap.aii.mdt.api.server.MessageMonitoring_Stub.getMessageList(MessageMonitoring_Stub.java:810)
     at com.sap.aii.mdt.util.WebUtil.generateTableViewModel(WebUtil.java:1254)
     at jsp_monitor_new1219936385390._jspService(jsp_monitor_new1219936385390.java:9)
     at com.sap.engine.services.servlets_jsp.server.jsp.JspBase.service(JspBase.java:112)
     at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:544)
     at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:186)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
     at com.sapportals.htmlb.page.PageProcessorServlet.handleRequest(PageProcessorServlet.java:68)
     at com.sapportals.htmlb.page.PageProcessorServlet.doPost(PageProcessorServlet.java:22)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
If I try to send message to XI directly through HTTP adapter the message is not delivered into Integration Engine.
Do you have any idea what to check or where could be problem?
Thank you in advance for every advice!
Best regards,
Zbynek

Hi Zbynek,
I think the problem is in the structure of the xml you want to send. I mean, that the structure of the message you are sending by means of SOAP adapter is not the same that the structure in the Inegration Repository.
When you test your message with a wrong BS it is sent to the IE and you can see this message in sxmb_moni with error status. It`s obvius, there is no configuration for this scenario. However if you test your scenario with right parametes but the content (xml structure) is wrong, the step when the content of the call is converted to the structure of the IR will fail. And the message doesn`t get the IE.
So check the content of your call.
I hope it is useful for you.
Regards,
Carlos

File to File ------ Message getting stuck in Integration Engine

Hi All,
I have a small issue in file to file scenario .
Once I send the file .Its getting picked up from the source directory but its not getting delivered to the destination directory.
When I check in SXMB_MONI ,message is successfully processed.
Now when I check in RWB. In Message monitring, In adapter engine its showing successful.
but for Integration engine its showing "To be delivered".
I am not able to understand the reason for this. Whether the issue is with configuration of the scenario or some other issues.
So please help me out......
Thanks,
Rohit

Hi,
Make sure you have set the MaxThreadCount parameter to 350 or higher depending of the case and of the resources available.
To increase the parameter, please follow the instructions below:
1. In the left frame choose Server -> Kernel -> ApplicationThreadManager
2. In the tab Display Configuration (right frame) choose Switch between view and edit mode to activate the edit mode.
3. The parameter MaxThreadCount must be set to 350.
4. You will then need to restart the J2ee
For reference see note #937159 - XI Adapter Engine is stuck
For specific setting to an adapter can be done by going to the Visual Administrator -> Services -> SAP XI AF Messaging
Look at the property 'Messaging connections' here you will see the following queues:
Send.maxConsumers (asynchronous sending - outbound)
Recv.maxConsumers (asynchronous receipt - inbound)
Call.maxConsumers (synchronous sending - outbound)
Rqst.maxConsumers (synchronous receipt - inbound)
Depending on where the bottleneck is occurring (i.e. too many entries in the Send.maxConsumers) you can increase these parameters.
Example of parameter value syntax (sample for FILE adapter):
(name=FILE_http://sap.com/xi/XI/System, Send.maxConsumers=10, Recv.maxConsumers=10, Call.maxConsumers=10, Rqst.maxConsumers=10)
For reference see note:
#791655 - Documentation of the XI Messaging System Service Properties
And see the link:
/people/kenny.scott/blog/2007/08/20/messaging-system-queue-properties-after-xi-30-sp19-xi-70sp11
Regards,
Caio Cagnani

Message Flow in Integration Engine

Dear Friends,
Kindly can someody share how the message is flowing in Intergration engine after the message taken from Adapter engine.
If you have any block diagram it will be helpful for me

Hi Karthik,
There are 6 stpes for the message processing thats only called
PIPELINE Steps.
what are all the steps involved in the Pipeline processing.
Sender Adapter picks up the file from the file system, converts it to XML and places it in the payload of an XI-SOAP message. Then it posts this message to the Integration Server pipeline via http(s).
XI pipeline steps are:-
->Sender Agreement
->Receiver Determination
->Interface Determination
->Interface Mapping
->Receiver Agreement.
When a source message reaches the Integration server, it performs 6 steps before the message reaches the destination. The steps are:
1) Receiver Determination: This steps determines the system that participates in the exchange of the message.
2) Interface Determination: For each receiver determine which interface will should receiver the message.
3) Message Split: If more than one receivers are found, Xi will instantiate new message for each receiver.
4) Message Mapping: Mapping to transform the source message to destination message format.
5) Technical Routing: Bind a specific destination and protocol to the message.
6) Call outbound Adapter: Send the transformed message to the adapter or a proxy.
One can examine these steps in Runtime Workbench using the Transaction: SXMB_MONI.
message flow in XI
The life cycle of the message is explained in detail by taking an example scenario. The file is picked up by the Sender File adapter and the data is inserted into DB table by Receiver DB Adapter.
       The adapter engine uses the messaging system to log the messages at every stage. This log is called the Audit Log. The audit log can be viewed from the runtime work bench (RWB) to look into the details of the lifecycle of the message. During our journey we will also have a look at the messages that are logged at different stages.
Note: This article is targeted for the newbieu2019s who want to understand the message flow in Adapter Engine. So the insight into the message lifecycle is provided here by taking only the Technical adapters (File/ JDBC/ JMS/ Mail) into consideration. It doesnu2019t delve into the lifecycle of the messages that have reached XI Adapter Engine using RNIF/ BC/ CIDX adapters.
ONWARD JOURNEY:
Fig1. Message flow from Adapter Engine to Integration Server
1.     For the message to be picked up by the communication channel, the channel should be associated with a sender agreement. Here creation of a communication channel doesnu2019t ensure the message to be polled and picked up by the adapter. The message reaches the adapter in its native message format. As the communication in SAP XI happens in XI message format, a module inside the adapter converts the message in native format into XI message format.
2.     During this process, a message ID is generated for the message. To build the XI header (sender agreement details like the sender system, sender message interface and the interface namespace) the details are fetched by performing a CPA lookup(collaboration-partner-agreement are the configuration object details that have been created using the configuration time. The details are updated into the runtime cache when you activate the Configuration objects in Integration builder u2013Configuration time. This cache is referred to as CPA cache).
3.     This message is then sent to module processor for further processing. During the process of sending the message to module processor, the message u201CApplication attempting to send an XI message asynchronously using connection AFWu201D is logged.
4.     The module processor performs steps like structure conversion, communication channel specific conversions (that have been specified in the u201Cmodule tabu201D of the adapter channel). These conversion modules are executed in the same sequence as mention in the communication channel.
5.     After the successful execution of the conversion modules, the appropriate module (call SAP adapter module) of the module processor is called which will send this message for persistent storage. This message is put into the Send Queue of the messaging system for further processing. Messages like u201CMessage trying to put into the send Queueu201D and u201CMessage successfully put into the queueu201D are logged during this process. A confirmation message (success/ failure) is sent back to the sender application at this stage. This confirmation message is used by the channel to perform various steps like deleting the file that has a processing mode as delete.
6.     The message that has been put in the Send Queue has to be picked up and sent to the Integration Engine. The Adapter Engine and XI Integration server use XI Adapter for internal communication purposes. So the XI Adapter picks up message from the send queue and parses the XI message. In this process, the status of the message is set to DLNG and. Messages like u201CThe message was successfully retrieved from the send queue and message status set to DLNGu201Dare logged.
7.     The XI adapter performs a SLD look up (System landscape Directory) to find the Integration server with which the Adapter framework has register itself.
8.     On successful SLD look up, the message is sent via HTTP to the XI IS pipeline, using the pipeline URL (http://hostname:abap-httpport/sap/xi/engine?type=entry). . If this is successful, a message u201CThe message was successfully transmitted to endpoint http://hostname:8000/sap/xi/engine?type=entry using connection AFWu201D is logged and the message statues is set to DLVD means message has been successfully delivered to the endpoint( XI IS in this case)
Fig2. Audit Log of message during onward journey
RETURN JOURNEY:
The return journey commences when the IS has successfully processed the message and delivers it to the Messaging system using the URL u201Chttp://hostname:50000/MessagingSystem/receive/AFW/XIu201D
br>
Fig3. Message flow from Integration Server to Adapter Engine
1.     When the Integration Server (XI IS) finishes processing of the pipeline steps (like receiver determination, interface determination and interface mapping), the message has to be delivered to the required Receiving system. So the XI Integration server will send the message to the messaging system of the Adapter Engine (AE) using the mentioned above. Once the message is successfully received by messaging system, the message u201CThe message was successfully received by the messaging system. Profile: XI URL: http://hostname:50000/MessagingSystem/receive/AFW/XIu201D is logged.
2.     As discussed Integration server and Adapter Engine use XI adapter for internal communication purposes. So the XI message that has been received by the messaging system URL is parsed by the XI Adapteru2019s protocol handler.
3.     The XI message is put into the receive queue and persisted. During this stage messages like u201CUsing connection AFW. Trying to put the message into the request queue; Message successfully put into the queue.u201D are logged.
4.     The XI messages that are put in the receive queue are retrieved by an application (Worker thread) and are sent to AFWListenerBean. AFWListenerBean is a module (an EJB) in Adapter Engine that is capable of parsing the XI message. On successful receive of the XI message by the AFWListenerBean, messages like u201CThe message was successfully retrieved from the request queue.u201D are logged and the status of the XI message is set to DLNG.
5.     The AFWListenerBean reads the receiver agreement and the corresponding channel from the XI header to determine the appropriate adapter. In this stage the adapter channel is logged in the audit log. u201CDelivering to channel: XYZ_Channelu201D
6.     The message is forwarded to the module processor where additional steps like structure conversions and extra modules specified in the adapter are performed.
7.     The exit module is called and the message is sent to the appropriate adapter (DB Adapter in this case). The format conversion will be executed within the specific adapter and sent to the Receiving system (DB in this case) using the channel that has been determined by the AFWListenerBean and the required action is reformed (select statement is performed in this case). On successful processing of the message the status is set to DLVD.

Problems with namespace XML Parsing of ABAP PI 7.0 Integration Engine

Hi,
I discovered the following problem.
The customer sends a SOAP message with is forwarded through a SOAP Adapter in the integration engine.
The structure of the message is very simple:
<Envelope>
<Body>
<ORDERS05>...</ORDERS05>
</Body>
</Envelope>
The customer adds the namespace information a special way:
<Envelope xmlns="http://schemas.xmlsoap.org/soap/envelope">
<Body>
<orders05 xmlns="">...</orders05>
</Body>
<Envelope>
Here the namespaces is declared in the first element. It should be inherited into all child elements. The 'orders05' should not have the namespace ' xmlns="http://schemas.xmlsoap.org/soap/envelope" ', therefore the namespace is overwritten with ' xmlns="" '. However I don't know if this is a correct xml statement, the SAP system did not understand this.
The integration throws an error which is stated in the message in the adapter engine:
2008-11-06 17:31:44 Fehler SOAPFault empfangen vom Integration Server. ErrorCode/Category: XIProtocol/ITEM_MISSING; Params: /@mustUnderstand, ST: ST_XMS_MSGHDR30_RM; AdditionalText: Attribut 'mustUnderstand' erwartet; ApplicationFaultMessage: ; ErrorStack: Das XML-Element /@mustUnderstand fehlt im SOAP-Message Header (SAP XI Extension) Attribut 'mustUnderstand' erwartet
2008-11-06 17:31:44 Fehler Fehler beim Übertragen der Message zum Endpunkt http://kas052.hauni.koerber.de:8036/sap/xi/engine?type=entry über die Verbindung SOAP_http://sap.com/xi/XI/System. Grund: com.sap.aii.af.ra.ms.api.RecoverableException: Received HTTP response code 500 : Error during parsing of SOAP header
If I changed the SOAP message to the common format, it is accepted by the integration engine.
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope">
<SOAP:Body>
<orders05>...</orders05>
</SOAP:Body>
</SOAP:Envelope>
Here the namespace ' xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope" ' is defined with a prefix and assigned to the elements 'envelope' and 'body'. The 'orders05' element has no namespace.
However due to the xml syntax both messages are the same, so why the integration engine handle the messages different?
Best regards,
Nils Kloth

The valid SOAP format supported by XI is as follows
<SOAP:Envelope
xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP:Body>
    <m:MessageTypeName xmlns:m="Some-URI">
      <Price>34.5</Price>
    </m:MessageTypeName>
</SOAP:Body>
</SOAP:Envelope>
Ur sender system is not sending the data in correct Soap format and thats the cause of message rejection. The option you have to use the Soap adapter in "no soap" mode.
Regards,
Prateek

Error in integration Engine

Hi All,
In integration Engine im getting error as "Exception occurred during XSLT mapping of the application".
when i tried to test the mapping its showing the warning as "javax.xml.transform.TransformerException: com.sap.engine.lib.xml.util.NestedException: Could not execute operation on Java Object. -> java.lang.reflect.InvocationTargetException at "
Please help me reagrding this issue to proceed further!!!

Hi,
Can u please explain the problem little detail...
Are u getting this error in SXMB_MONI??
If yes then can u copy the source payload and check it in the Message Mapping once??
If problem is coming from mapping... try to analyze.. else u can put now vtz exactly the prblm is..
Babu

HTTP error 403 to Integration engine

Hello,
Problem a)
While posing data from eSourcing to PI box by HTTP , we are getting HTTPerror 403.
The error message states:
ID: E-Sourcing was unable to publish PROP-00090--2010 to ERP. class java.io.IOException Server returned HTTP response code: 403 for URL:
Problem b)
In another observation the sender file adapter after polling the file is unable to send the message to Integration engine and gives a Connection Time out error. it gives the following error.
Transmitting the message to endpoint http://<Host>:<Port>/sap/xi/engine?type=entry using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error transmitting the message over HTTP. Reason: java.net.ConnectException: Connection timed out: connect.
I believe that both the errors are for common cause and possibly the Integration engine is not accepting HTTP request.
Please help.
Thanks and Regards,
Himadri
Edited by: Himadri Chakraborty on Feb 9, 2010 3:35 PM

Time Out Error
In order to get rid of it, Your basis person need to play around with follwing three parameters in order to find an appropriate values as per your hardware sizing and requirement......
icm/conn_timeout
icm/keep_alive_timeout
icm/server_port_< n >
How ever, in general SAP recommandation is as follow....
icm/server_port_0 = PROT=HTTP,PORT=1080,TIMEOUT=30,PROCTIMEOUT=600 to allow a maximum processing time of 10 minutes.
Hope this helps !!!
Regards,
J Augastine

Mail-Adapter Integration Engine Error during parsing of SOAP header

Hello,
we use XI with the mail adapter. Most of the messages are processed correctly. But sometimes I get following errors in the J2EE-logviewer:
Transmitting the message to endpoint http://<xi-host>:<http-port>/sap/xi/engine
?type=entry using connection AFW failed, due to: com.sap.aii.af.ra.ms.a
pi.RecoverableException: Received HTTP response code 500 : Error during
parsing of SOAP header.
Failed to transmit message 4e913640-4cc5-11dc-8560-00e000c55366(OUTBOUND)
due to com.sap.aii.af.ra.ms.api.RecoverableException: Received HTTP
response code 500 : Error during parsing of SOAP header.
Retries exceded, set message
4e913640-4cc5-11dc-8560-00e000c55366(OUTBOUND) to status NON_DELIVERED.
Has somebody else the same problem and solved it or any idea what the matter could be?
Thanks for your help
Christian

Hi Reddy,
We´ve got the following scenario:
Exchange-Server (is always up)
XI Mail-ReceiverAdapter
I use IMAP4 to access the Outlook-Email-Box
Everything works fine. But some Emails aren´t processed.
I think it´s a problem between adapterframework and the integration engine?
There is no difference between the emails?
If you´ll need further informations ask me?
Thanks

Entry missing in Integration Engine (sxmb_moni)

Similar Messages

Maybe you are looking for