Entry missing in table TMC6 for unit KOEIN

Hi,
The STD Info structure S071 us marked for VA (Sales Order), it does not allows to change as it is SAP STD. I have a scenarios where these tables to be updated for VB (Contract). So i thought of creating a new table copying the existing S071, while i try to Update Rules for the new Info structure, i am getting the below copied error.
I went through some of the links, but those are not giving the right answer. All comments are welcome...thanks
Entry missing in table TMC6 for unit KOEIN:
Message no. M2108
Diagnosis
The system attempts to determine the unit of the source field for field
KAWRT. The data element KOEIN was defined as part of this process.
The system now searches table TMC6 for this data element in order to
define the two-character units ID. However, no appropriate entry could
be found.

Hi,
It says -
Solution
This is corrected in the Support Package for Release 4.70, 5.00, 6.00, 6.02 and 6.03.
We are running on 6.00 , how ever i will go through the Correction Instruction... thanks

Similar Messages

Posting thro J1IEX error - DEBIT ENTRY missing in table J_1ITRNACC

Hello,
While posting Cenvat Credit in J1IEX, the system is giving error as "Customization for DEBIT ENTRY missing in table J_1ITRNACC".
- "The customization details have not been maintained for this company".
When checked thro' SPRO>IMG>Logistics-General>Tax on goods movement>India>Account determination>Specify excise accounts per excise transaction', it shows all debit, credit entries for excise transaction type 'GRPO'.
Kindly suggest me what else need to be checked? Part I entry is already done during MIGO.
Thanking in advance.
Regards
Ratna

Dear Velu & Pankaj Singh,
Thanks for your prompt reply.
We already had setting for the following.
GRPO CR Credit CLEAR CENVAT clearing account
GRPO DR Debit ONHOLD CENVAT on hold account
GRPO DR Debit RG23AED RG 23 AED account
GRPO DR Debit RG23AT1 RG 23 AT1 Account
GRPO DR Debit RG23BED RG 23 BED account
GRPO DR Debit RG23ECS RG 23 ECS Account
The above is also maintained for sub trn type 'IP'
But we do not have any entry for SED account i.e. record does not exist for GRPO DR Debit RG23SED RG 23 SED Account.
The excise entries contains BED account, AED account, ECS account and AT1 account as SHE CEss account.
Pl. suggest.
Regards
Ratna

No entry found in table SMOFQFIND for BDoc type SI_CONTRACT

Hi Gurus,
I try to do a request dowload for SI_CONTRACT object.
When execute and monitor my request objects the status is OK.
Then, I check the BDocs Message Trace and I see the following error
"No entry found in table SMOFQFIND for BDoc type SI_CONTRACT - Queue name used: CRI_SI_CONTRACT (see note 677800 for further info"
Does anyone know how to resolve this issue?
Thanks,
M@le

Hi Brian,
There was leading 0 for the contract # in the request detail, however this message is still in the BDoc message trace. The BDoc was posted successfully. I checked the table SMOFQFIND and could not find the entry for BDoc type SI_CONTRACT.
There are records for SI_CONNOBJ and SI_POD which are all delivered by SAP. I think we just need to maintain SI_CONTRACT in this table to get rid of this message. Just I do not know what exact to maintain for SI_CONTRACT.
Could you help to check standard SAP environment to see what is the detail for SI_CONTRACT in table SMOFQFIND?
Thanks,
ZJKong

0HR_PT_1 Extraction issue No entry in HR table T569R for 0106

hi experts,
we are implementing Time and Labour cube, and trying to extracting from ECC to BW cube (0PT_C01).
when i extract data from 0HR_PT_1 data source the PSA Request is in yellow for a long time. when i check the issue in ECC. Its giving the below issues.
No entry in HR table T569R for 0106
No entry in HR table T569R for 0105
No personal work schedule for personnel number 00013090
No personal work schedule for personnel number 00013145
No personal work schedule for personnel number 00500009
No personal work schedule for personnel number 00500026
How to rectify the above issues and the load make successful?
Regards
venuscm

Hi,
Do the below things, as per the note 696836.
By using the view V_T569R, maintain the retroactive categories
1. 05 'Earliest time data carry-over'
2. 06 'Latest time data carry-over'
which constitute the time frame, in which the system will perform an extraction. Outside this time frame, the system will neither select any data nor calculate any delta. SAP recommends that you choose a period that includes approximately the current year. You have to maintain and update this time window periodically.
Regards,
Anil Kumar Sharma. P

"No entry in the table T589A for P" in PPOME's custom Tab

Hello,
requisites: Add one custom Tab to transaction PPOME relative to Position (Object type S)
problem:"No entry in the table T589A for P" when entering the transaction PPOME, and choose my new added Tab.
I get this error message "No entry in the table T589A for P" when entering the transaction PPOME, and choose my new added Tab.
The thing is, if I comment the line "MODULE BEFORE_OUTPUT" in subscreen 7000 of the infotype (the tab is infotype specific) this error disappear. But then the data entered in the tab, which should be relative to one position (type S), is now displayed for all positions. When leaving the transaction, and entering again, in the same tab, the data has disappeared.
I think I should not comment this: "MODULE BEFORE_OUTPUT"
Why is this error being raised, and what must I do do stop it?
Thank you.

Hi,
The table T589A is a configuration table pertaining to the pf status of the infotype. I changed the pf status of the infotype i.e. added my own buttons on application tool bar. May be cos of that it is giving error. Not sure.......

Error message 'No entry in the table T589A for P 2'

Hi all,
I am updating the field of an infotype using the function module 'HR_INFOTYPE_OPERATION'. But the function module is not updating the field. Instead the return key of the function module has the message
'No entry in the table T589A for P2'. The function module is called as follows:
CALL FUNCTION 'HR_INFOTYPE_OPERATION'
EXPORTING
    infty                  = '9900'
    number                 = wf_pernr
    SUBTYPE                = P9900-SUBTY
OBJECTID               =
LOCKINDICATOR          =
    VALIDITYEND            = P9900-ENDDA
    VALIDITYBEGIN          = P9900-BEGDA
RECORDNUMBER           =
    record                 = p9900
    operation              = 'MOD'
TCLAS                  = 'A'
   DIALOG_MODE            = '0'
   NOCOMMIT               =
VIEW_IDENTIFIER        =
SECONDARY_RECORD       =
IMPORTING
   RETURN                 = wf_return
   KEY                    = wf_key
Please suggest.
regrds,
madhu

Hi,
The table T589A is a configuration table pertaining to the pf status of the infotype. I changed the pf status of the infotype i.e. added my own buttons on application tool bar. May be cos of that it is giving error. Not sure.......

Table entries missing in table TJ05

Hi Experts,
I have search in SCN regarding below issue...but i havn't get any solution.
Recently we upgrade to ECC EHP5 from 4.7,
The values "ZIN1" in table "TJ05" is missing in ECC 6.0. This value was available in 4.7 .
How can Z1N1 value insert in the TJ05 table.
above reason the "Non-updation of status in QM notification".(its effecting to Quality module.)
need to be insert values through configuration or through a tcode in SPRO..
i can't use this thru utilities->Table Contents->create entries in se11.
I know that we can forcibly insert values while debugging
if code = 'SHOW'.
set titlebar 'TAB'
elseif code = 'EDIT'.
Please provide valuble suggestion.
Thanks and Regards,
Syfulla

- Check also if records are missing in table TJ03.
- The code start with a "Z" and should have been added by your company/customer (*), so may have been erased by the upgrade (you know/remember the warning message like "Do not make any changes (SAP entry)" ignored by press ENTER
Look at BS* transactions like BS12/BS13 or BS22/BS23.
Regards,
Raymond
(*) Not found on a 4.6c, a 4.70 and an Ecc6 Ehp4 systems..)

F-58 Error - Entry missing in Table T043G

Hi Gurus,
I am trying to post a check payment through F-58. This is a same company code payment. The error of the T043G table entry appears.
When I go to the table, all the relevant entries are maintained.
Please help as to what I am missing here.
Thanks
Sheli

Hi,
Go to T.code : OBA3 Path:Financial Accounting (New)->Accounts Receivable and Accounts Payable>Business Transactions>Outgoing Payments>Manual Incoming Payments>Define Tolerances (Vendors) and create Tolerance Group and save
and go to FK02 and give vendor number ,company code and select payment transactions Check box and enter and give Tolerance Group and save
Thanks,
Raviteja

PS table structure for Unit Costing

Hi,
The requirement is:
For every Network -> Network Activity combination , we need to get the Unit Costing for each Network Activity.
We have tried with CKHS and CKIS tables but we couldnt get a link.
The output should be of the form:
Network Network Activity Cost Element Qty Rate Amt
Could anybody suggest what are the standard tables and linkages to get this out.
Regards
Syam

AFVV-PEDD

No entry in the table T528B for S 50001819

Hi Guys,
I have created all the positions using PPOME & now trying to hire people under PA40, but it gives above error.
What could be the problem?
Thanks
Deepali

Is this the first time you're hiring an employee after you've created the positions?
Or have there been an upgrade in the system?
Please make sure that the following entries are there in T77S0 table:
PLOGI PLOGI 01
PLOGI ORGA X
Activate PLOGI feature via PE03.
run all the RHINTEXX reports.
Please also make sure that positions are in active status before assigning them to employees.
Change status PO13 - Edit Status change - Activate --> If needed.
Check the plan versions too.
Dilek
Edited by: Dilek Ersoz Adak on Dec 28, 2009 1:37 PM

Entry missing in table t78nr

hi ppl,
I have checked all the queries relevant to my question and got an overview idea of how to configure in swu3.But my problem here is iam practising in client 300(test client).I need to enter an unique number in swu3.So i dont want to inform this to my basis consultant.Isit ok if i put 123,or id1 any numbers or alphabets as prefix number.

Hi Priyank,
To maintain prefix number in dev, do the following:
1. Go to transaction SWU3.
2. Expand node Maintain Definition Environment
3. Go to Maintain Prefix numbers and execute it.
4. Make an entry giving a prefix number say 900, SAP system name, client used and Package to store it.
5. Now generate Maintain Prefix numbers.
To transport workflows from dev to test system do the follwoing:
1. Go to t-code SCC1.
2. Select the transport request number and enter the source system as dev system (client)
3. Click on 'Including Request Subtasks.
4. Click on button 'Start immediately'
This would copy the TR from dev to test system.
Hope this helps!
Regards,
Saumya

Table field for Unit Price

Hi Folks,
Can any one tell me which field of either VBAP or MARA is used as Unit Price of an item.
Thanks
Siddarth

Hi Jain
the MBEW-PEINH is the Price unit with length 5.
or
data:
amount like bseg-dmbtr,
quantity like bseg-menge,
unit_rate like bseg-dmbtr.
amount = '87405.32'.
quantity = '2.000'.
unit_rate = amount / quantity.
write unit_rate.
reward points to all helpful answers
kiran.M
Message was edited by:
Kiran Machavarapu

Change entris on dimension table

Hi All,
We have two entries in DIM table one for Fixed currency info object in the cube like blow.
1. DIMID   SID_0CURRENCY SID_0SALES_UNIT
    0          1000000044         2
DIMID is zero beacuse we have created Info Object with fixed currency.
Now we have to open this filed for all the currency but system not allowing to change the Info Object beacuse data in the cube and we have almost 2 Billion record in the cubes.
So we are thinking to do the changes like below.
We have another entries in the table for not fixed currency Info Object
2.DIMID ; SID_0CURRENCY SID_0SALES_UNIT
   2         1000000045         3
SO now we are planning to overwrite record 1 with record 2. so my new record 1 look like below.
1. DIMID   SID_0CURRENCY SID_0SALES_UNIT
   02         1000000045         3
Please suggest me can we change the DIM table.
Saleem.

Hi Saleem
Dont manupulate the dimension table values manaually,it may leads to inconsistency(after doing manual change RSRV sure will through error).If you do so the connection of Dimension table with Fact and SID will get distrub,same can be rectified by RSRV,repair objects.Not sure how for it will recreate the connections..
Still if you want to take risk...dont delete the Fact table data...via SE38 (prog name DB_DROP TABLES*...Not sure about the program name,better search) delete the Dimension table values(if its not permissible means same can be achieved by ABAP debugging),delete master table and freshly populate the master data table.
Use SLG1 for more Txn data analysis.
Thanks
TG

Entries in USR03 table

Hi ALL,
Please let me know which SAP functional transaction code should I use to make the values reflect in USR03.Please be informed that its not happening with SU01.
Regards
Ravi

Thanks I know.
I want to know whether all entries in this table are for the Users who currently running SAP?? Then those Users's address will be real-time stored in this table?
Or USR03 table like other table KNA1..etc, if you create an entry in the table, then this record will always there?
Thanks.

Table T588M for info type screen display:

Hi Experts
I have deleted relevant entry in in table T588M for an info type still the system shows some screen. where from does that screen come. Can anybody help..?

As i understand, there is a screen element that you want to get it disabled but is not available in the table v_t588m. Is that right???
If YES, the screen element/ field of your screen, for example 3000 of it0817, can be disabled from the screen layout also.
Go to SE80 -> select the module pool mp081700 as your program -> select screen 3000 -> Click on the 'layout' in the application toolbar -> select the element and delete or change the properties, might be display properties in your case.
Hope this helps.
Cheers,
LG

Entry missing in table TMC6 for unit KOEIN

Similar Messages

Maybe you are looking for