Entry missing in TADIR

Hello,
A Z-report gets dynamically generated in one of our application. My problem is that sometimes there is an entry in TADIR for the Zreport that has been generated and sometimes there is not. Can somebody tell me how and in what scenarios an entry is put in the TADIR.
Unless I have an entry in TADIR, I can not transport this report.
Regards,
Mytreyi

I have already tried doing that, i get the following error:
No object directory entry for object R3TR PROG ZZMS_OPT_1
When there is an entry for TADIR for the corresponding object, I dont get the error.
Regards,
Mytreyi

Similar Messages

Trying to save as PDF/A-1a: "Structure tree root entry missing" and "MarkInfo missing"

I would like to convert born-digital documents originally created in Word 2007 to the PDF/A-1a standard.
From Word, I am only able to Print to PDF/A-1b. I did that, opened the resulting PDF in Adobe Acrobat 9.3 Professional, and tried running the Preflight to save the PDF as a PDF/A-1a. I received the following two errors:
"Structure tree root entry missing"
"MarkInfo missing"
I'd like to know if there's a way I can remedy this situation, either from the Word doc or the PDF doc. Thank you.

I imagine that the original poster would like for a solution that simple to work. I also imagine that s/he gets the same error message I do every time I try to create a PDF from a Word document in the suggested way:
"Acrobat could not open '[file name].doc' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).
To create an Adobe PDF document, go to the source application. Then print the document to Adobe PDF or use the Acrobat toolbar found in Microsoft Office applications."
Is there any way to convert the PDF you get from printing to PDF to PDF/A-1a successfully?

How to solve this "Prefix number: entry missing for system EC5 client 800"

Hi,
I am workflow learner, I am having theoretical knowledge on it.
Now, I started to practice practically in my IDES server.
I am getting an error message while I am trying to save my standard task with my object type and method and event (which were already created in SWO1).
My error message details.....
Prefix number: entry missing for system EC5 client 800
Message no. 5W023
Diagnosis
Tasks, rules, and workflow definitions require an ID that is unique throughout all systems and clients. In this way, you can ensure that you can transport these objects from one system into another at any time (without restrictions). From a technical point of view, the uniqueness of the ID is ensured by what is known as a "prefix number". You can define a separate prefix number for every system and every client in table T78NR.
System response
If a prefix number is not defined in the client in which you are currently working, it is not possible to maintain (maintenance terminates).
Even I tried to create on entry in the table T78NR, but as that is standard table, I am unable to make an entry.
Hope we have to configure the workflow, I am not having any Basis consultant with me. Can anyone help to cross this problem.
Thanks and Regards,
Surender Batlanki.
Edited by: Surender Batlanki on Oct 15, 2008 2:20 PM

HI Surender and Other SAP Work flow gurus
Surender, u said, that you got the solution.
As honestly speaking i am new to SAP Workflow. Can u please please guide me the instruction and document if any. I am practising in Test Server machine. I will be really happy that if u all GEMS helps me to get out of it.
in Prefix number OOW4, system is asking me to enter, the Prefix number, Interval start, Interval End, and Check Sum.
I entere the same 980 in prefix number, and i dont know what to enter the Interval start and interval end and check sum.
Also there is some msg coming when i tried to manage some values, " NO Intervals can be reserved for this prefix number" - MSg No: 5W179.
Please gurus help me.
Regard
Guru

Archiving Object - Entry missing in Customizing table for object Z*********

Hello friends,
We have created a archiving object in transaction AOBJ. However when i enter this object in SARA, we get this error message.
"Entry missing in Customizing table for object Z******* "
I have matched my object with few other archiving objects and things looks similar.
Have you faced this kind of problem..
thanks
ashish

Hi,
I checked and i can see entry for ZSCS_TRAFO object in AOBJ.
But when i enter ZSCS_TRAFO, i get this error :
Entry missing in Customizing table for object ZSCS_TRAFO
Message no. BA057
Diagnosis
A function cannot be executed due to a missing table entry.
Procedure
Please create an entry for the archive object ZSCS_TRAFO with the AOBJ transaction.
However, a few other Z objects works well.
thanks
ashish

Error: Prefix number: entry missing for system REP client 113 Msg no 5W023

Hi, we're trying to study Workflow based on the manuals we downloaded online. Upon saving, we encountered the error: Error: Prefix number: entry missing for system REP client 113 Msg no 5W023.
Here's the diagnosis:
Diagnosis
Tasks, rules, and workflow definitions require an ID that is unique throughout all systems and clients. In this way, you can ensure that you can transport these objects from one system into another at any time (without restrictions). From a technical point of view, the uniqueness of the ID is ensured by what is known as a "prefix number". You can define a separate prefix number for every system and every client in table T78NR.
System Response
If a prefix number is not defined in the client in which you are currently working, it is not possible to maintain (maintenance terminates).
Procedure
Maintain table T78NR in Customizing, and create an entry for the system in question and the current client.
Hope somebody can help me understand what this is.. thanks so much and appreciate your help..
Thanks,
Angela Paula

Hi Angela,
Please check if the Prefix number is maintained in SWU3 t-code.
Go to Maintain Definition Environment -> Maintain Prefix Numbers and check if the prefix number is maintained.
Hope this helps!
Regards,
Saumya

Posting thro J1IEX error - DEBIT ENTRY missing in table J_1ITRNACC

Hello,
While posting Cenvat Credit in J1IEX, the system is giving error as "Customization for DEBIT ENTRY missing in table J_1ITRNACC".
- "The customization details have not been maintained for this company".
When checked thro' SPRO>IMG>Logistics-General>Tax on goods movement>India>Account determination>Specify excise accounts per excise transaction', it shows all debit, credit entries for excise transaction type 'GRPO'.
Kindly suggest me what else need to be checked? Part I entry is already done during MIGO.
Thanking in advance.
Regards
Ratna

Dear Velu & Pankaj Singh,
Thanks for your prompt reply.
We already had setting for the following.
GRPO CR Credit CLEAR CENVAT clearing account
GRPO DR Debit ONHOLD CENVAT on hold account
GRPO DR Debit RG23AED RG 23 AED account
GRPO DR Debit RG23AT1 RG 23 AT1 Account
GRPO DR Debit RG23BED RG 23 BED account
GRPO DR Debit RG23ECS RG 23 ECS Account
The above is also maintained for sub trn type 'IP'
But we do not have any entry for SED account i.e. record does not exist for GRPO DR Debit RG23SED RG 23 SED Account.
The excise entries contains BED account, AED account, ECS account and AT1 account as SHE CEss account.
Pl. suggest.
Regards
Ratna

Entry missing in table TMC6 for unit KOEIN

Hi,
The STD Info structure S071 us marked for VA (Sales Order), it does not allows to change as it is SAP STD. I have a scenarios where these tables to be updated for VB (Contract). So i thought of creating a new table copying the existing S071, while i try to Update Rules for the new Info structure, i am getting the below copied error.
I went through some of the links, but those are not giving the right answer. All comments are welcome...thanks
Entry missing in table TMC6 for unit KOEIN:
Message no. M2108
Diagnosis
The system attempts to determine the unit of the source field for field
KAWRT. The data element KOEIN was defined as part of this process.
The system now searches table TMC6 for this data element in order to
define the two-character units ID. However, no appropriate entry could
be found.

Hi,
It says -
Solution
This is corrected in the Support Package for Release 4.70, 5.00, 6.00, 6.02 and 6.03.
We are running on 6.00 , how ever i will go through the Correction Instruction... thanks

Entries missing for Condition tables in TADIR

Hi,
I have downloaded certain pricing condition tables from ECC (customizing download). They got generated successfully and were visible as 'Active' in SPRO and ABAP Dictionary (SE11).
When I ran the customizing download again, all the tables had become 'Inactive' in SPRO>Customer Relationship Management>Basic Functions>Pricing>Define Settings for Pricing--> Create Condition Tables.
But at the same time, these tables are appearing as 'Active' in SE11 and condition records are also flowing for them from ECC to CRM.
Having checked the log in Transaction SLG1, there are visibly few errors stating 'Entry not found in TADIR' for some condition tables.
Any pointers to identify the source/cause of this error or how to resolve the same?
Thanks & Regards,
Vartika

Hi Vartika,
The note 457711 will be helpful for you.
Generally these errors on TADIR coversion will not cause any problems on your conditions download..These errors can be ignored.
Please check for inconsistencies between R/3 ad CRM using the note 664815 and correct them. There are reports attached to it for 4 diferent cases.
Thanks
Abishek
Edited by: Abishek Kumar Thiagarajan on Jun 11, 2009 8:58 AM

Entries missing in J2I8 Capital goods transfer of credit

HI Experts,
R23C part 11 register entries are not matching with J2I8 entries.Some entries found in RG23C part 11 Register are missing in J2I8 - Capital goods transfer of credit.What may the probem.
Some entries found in J2I8 has to be deleted.Is it possible to delete entries in J2I8.If no, then how can it be removed from J2I8 list.
The issue is very urgent.Can anybody throw some light on this issue.
Thanks in advance
Latha
Edited by: swarna latha on Apr 15, 2010 11:12 AM
Edited by: swarna latha on Apr 15, 2010 12:37 PM
Edited by: swarna latha on Apr 15, 2010 1:19 PM
Edited by: swarna latha on Apr 22, 2010 12:29 PM
Edited by: swarna latha on Apr 27, 2010 1:25 PM

Hi Manoj,
Thanks for your response.
This is the first time i am using J2I8 T code for transfer of credit.
The particular SAP note has not been applied so far.
I will apply the same and if any problem existing, will let you know.
Thanks
Regards
Rifaie.M

Planning file entries missing for some materials in MD21.

Hi gurus,
when i check the MD21, i found that some materails are not having planning file entries i.e netch and netpl indicator .and because of this we found that these materials are not being in planning.
From my understanding these planning file entries were updated when the material was created.
I am not sure how these entries are missing. Please can any one help me find out the root cause for the same.
Thanks in advance.
Naveen.A

Dear,
Please note MRP has to be activated for plant level before creating materials in OMDU. Then only created materials will have planning file entries.
You can run planning file entries consistency check in background before the MRP run to create/delete the planning file entreies automatically from MDRE/MDAB transactions...This will be useful to avoid the re-planning of the materials ( if planning file entry is not deleted after MRP run) and also to plan material (if planning file entry is not created).
Regards,
R.Brahmankar

Incorrect logical system name for datasources - entry not in TADIR

Hi all,
I currently can't replicate or edit any of my data sources because, after we applied some patches, the logical system name appears to be incorrect and a message is displayed saying the R3TR RSDS entry does not exist in table TADIR.
For example:
Object directory entry R3TR RSDS 0EMPLOYEE_0016_ATTR R3DEV does not exist.
That's correct, because all entries exist for my actual source system CD1CLNT175, not for SAP standard R3DEV.
Does anybody have any idea how I can update my source system configuration/mapping? I've looked on the forum but couldn't
find a clear cut answer.
Thanks a lot!
Markus

Hi all,
I think the solution lies in SAP note 1604726 "DataSources with package assignment cannot be activated"
1. When you access the change transaction RSDS, the system issues error message TK 753 "Object directory entry R3TR ... does not exist" twice.
2. When you try to activate the DataSource, the system issues error message TK 425 "Invalid call sequence for interfaces when recording changes".
My message is TK753.. and before that I receive TK425, I guess we have to apply SP28... time for Mario and Luigi to apply some pizzas... ehmm patches...!
I will let you know if that solved the problem, thanks for your help guys!
Markus

Duplicate entries missing using for all entries in select query.

Hi Gurus,
Is there any way to avoid missing duplicate entries in an internal table if you use for all entries in select statement?
Note : i am selecting two tables using non key fields and i have to aggregate the data. I want only 2 data fields and one amount field in my final internal table. I can add all the primary key fields into my internal table and collect my required fields in another table, but I just want to know is there any other way to avoid missing duplicate entries without adding all the key fields?
Regards,
Raghavendra

Hi,
Just check what are the other possible fields in the table which may be having
duplicate entries and make use of them in the selection accordingly.
You may not miss any entries unless there is any restriction on them.
You can better judge that in debugging mode while selecting data from that table.

Entries missing in excel sheet when sent as an attachmt in email in ECC6.0

Hi All,
When I am sending an email with excel attachment from SAP , email functionality is working fine. But when I try to open excel sheet it is giving a warning that "Incompatible format" and when I click on "OK" button excel sheet is opened bu some entries are missing. This problem is occuring when I am sending email in ECC6.0 whereas in 4.7E it works fine.
I am using classes to send email. Please let me know if any one has any solution.
My code is :
g_text_content is the internal table having data .
example data in g_text_content : line 1 : col1#col2#col3#....
                                                 line 2: col1#col2#col3#...
convert the content from RAW to TXT
CALL FUNCTION 'SO_RAW_TO_RTF'
    TABLES
      objcont_old = g_text_content
      objcont_new = g_text_content
    EXCEPTIONS
      OTHERS      = 0.
    create the document with attachments
    main document
    APPEND 'Sales Report (Quantity Basis) ' TO g_text.
WRITE p_date TO wa_line.
CONCATENATE 'Report Date:' wa_line INTO wa_line SEPARATED BY space.
APPEND wa_line TO g_text.
APPEND 'Sent as attachment' TO g_text.
TRY.
    create the send request
      send_request = cl_bcs=>create_persistent( ).
      IF NOT text[] IS INITIAL.
        document = cl_document_bcs=>create_document(
                                  i_type    = 'RAW'
                                  i_text    = text "main email text
                                  i_subject = p_subj ).
      ENDIF.
    add text attachment to document
      IF NOT text_content[] IS INITIAL.
        document->add_attachment( i_attachment_type    = 'XLS'
                              i_attachment_subject = p_subj
                              i_att_content_text   = text_content ).
      ENDIF.
    add list attachment to document
      IF NOT list_content[] IS INITIAL.
        document->add_attachment( i_attachment_type    = 'ALI'
                           i_attachment_subject = p_subj
                           i_att_content_hex    = list_content ).
      ENDIF.
    add document to send request
      send_request->set_document( document ).
*email to
    create recipient and add to send request
      IF NOT p_to IS INITIAL.
        LOOP AT p_to.
          recipient = cl_cam_address_bcs=>create_internet_address(
                                            p_to-low ).
          CALL METHOD send_request->add_recipient
            EXPORTING
              i_recipient = recipient.
        ENDLOOP.
      ENDIF.
*copy to
    create recipient and add to send request
      IF NOT p_cc IS INITIAL.
        LOOP AT p_cc.
          recipient = cl_cam_address_bcs=>create_internet_address(
                                            p_cc-low ).
          CALL METHOD send_request->add_recipient
            EXPORTING
              i_recipient = recipient
              i_copy      = 'X'.
        ENDLOOP.
      ENDIF.
Blind copy
      IF NOT p_bcc IS INITIAL.
        LOOP AT p_bcc.
          recipient = cl_cam_address_bcs=>create_internet_address(
                                            p_bcc-low ).
          CALL METHOD send_request->add_recipient
            EXPORTING
              i_recipient = recipient
              i_blind_copy = 'X'.
        ENDLOOP.
      ENDIF.
    send
      sent_to_all = send_request->send( i_with_error_screen = 'X' ).
      IF sent_to_all = 'X'.
        MESSAGE s022.
      ENDIF.
      COMMIT WORK.
    CATCH cx_bcs INTO bcs_exception.
      MESSAGE e865 WITH bcs_exception->error_type.
ENDTRY.
Thanks,
Sonali.

Hi change the below sample as per your requirement.
<unreadable code removed by moderator>
Regards
chitra
Moderator message: please post only relevant code parts, your posts must contain less than 5000 characters to preserve readable formatting.
Edited by: Thomas Zloch on Nov 15, 2011 1:03 PM

Table entries missed

Hi,
Some table entries were missed.
How can we get the details and any solution to get the table entries again?
Regards,
Chandu

Hi,
Are you trying to say that the records got Deleted???
If yes then, the basis team has to restore the SAP system to the point when the table entries were present.
The risk here is the programs and configuration done after that point will get deleted.
Regards,
Vimal.

Standard Table entries missing in E-RECRUIT System

Hi,
We are in the phase of E-Rec implementation. We have installed standalone E-recruit system (NW 7.4)
We did client copy with SAP_CUST profile from 000 to 300, but some of the table were not reflected which we copied again.
We run the report RHTTCP77 for tables t77rcf* and copied client dependent tables from 000 to overcome the issue for the missing tables in 300.
But, still we have an issue with VV_T77SK_RCF as all entries are not updated, what is the way fwd?
Shall we proceed with SAP_CUST or SAP_ALL during client copy if we need above entries?
Can anyone please suggest what way we will follow to overcome the issue of missing tables?
Regards,
Khushboo Sahu

Hi,
Please use SAP_ALL and for step wise instruction please check the below thread -
http://scn.sap.com/thread/121904

Entry missing in TADIR

Similar Messages

Maybe you are looking for