ENTRY_NEU doesn't exist in program /SMB40/FM06P
We are getting the above error when trying to print the PO. The log says ENTRY_NEU doesn't exist in program /SMB40/FM06P. There is short dump for CALL_FUNCTION_PARM_MISSING.
We are doing an upgrade and this has occured as part of the upgrade. PRD on the old system is fine, but the new system gives this error and All the config, is correct and the same.
if this is full sap standard program, ask sap support. Note that the 2 messages are not directly related (one is for a missing subroutine, the other is for a mandatory parameter in a function module that is not passed in the CALL FUNCTION). Maybe you use best practices of the wrong release or something like that...
Similar Messages
-
Hi,
there is someone could post me the code of the program /SMB40/FM06P (print program for best-practice smartforms Request Order) ?
I have lost the source of the code during the upgrade from ECC 5.0 to ECC 6.0.
(the version of the ECC 5.0).
Thanks
Fred.Hi Frederic Girod,
Here i'm sending the code for program /SMB40/FM06P.
Subroutine pool /SMB40/FM06P
Smart Form Print Program *
*Data
INCLUDE /SMB40/FM06TOP.
Subroutines for the Print Program
INCLUDE /SMB40/FM06PE02.
program /smb40/fm06p message-id me.
type-pools: addi, meein,
mmpur.
tables: nast, "Messages
*nast, "Messages
tnapr, "Programs & Forms
itcpo, "Communicationarea for Spool
arc_params, "Archive parameters
toa_dara, "Archive parameters
addr_key. "Adressnumber for ADDRESS
type-pools szadr.
tables : varposr,
rwerter,
mtxh.
data umbruch type i value 4.
data headerflag.
data begin of vartab occurs 15.
include structure varposr.
data end of vartab.
data tabn type i.
data taba type i.
data ebelph like ekpo-ebelp.
data bis type i.
data xmax type i.
data tab like varposr-yzeile.
data diff type i.
data ldat_sam like eket-eindt.
data: s, v type i.
data: sampr like pekpov-netpr, varpr like pekpov-netpr.
Struktur zur Variantenbildung
data: begin of wertetab occurs 30.
include structure rwerter.
data: atzhl like econf_out-atzhl,
end of wertetab.
Interne Tabelle fuer Konditionen
data: begin of kond occurs 30.
include structure komvd.
data: end of kond.
Hilfsfelder
data:
merknamex(15) type c, "Merkmalname x-Achse
merknamey(15) type c, "Merkmalname y-Achse
merknrx like rwerter-nr, "Int. Merkmal x-Achse
merknry like rwerter-nr, "Int. Merkmal y-Achse
i type i value 1,
nr like cawn-atinn.
data: inserterror(1),sum type i,menge type i,gsumh type i, xmaxh type i.
data: gsumv type i.
Matrixflag
data: m_flag value 'x'.
*- Tabellen -
tables: cpkme,
ekvkp,
ekko,
pekko,
rm06p,
ekpo,
pekpo,
pekpov,
pekpos,
eket,
ekek,
ekes,
ekeh,
ekkn,
ekpa,
ekbe,
eine, *eine,
lfa1,
likp,
*lfa1,
kna1,
komk,
komp,
komvd,
ekomd,
econf_out,
thead, *thead,
sadr,
mdpa,
mdpm,
mkpf,
tinct,
ttxit,
tmsi2,
tq05,
tq05t,
t001,
t001w,
t006, *t006,
t006a, *t006a,
t024,
t024e,
t027a,
t027b,
t052,
t161n,
t163d,
t166a,
t165p,
t166c,
t166k,
t166p,
t166t,
t166u,
t165m,
t165a,
tmamt,
*mara, "HTN 4.0C
mara,
marc,
mt06e,
makt,
vbak,
vbkd,
*vbkd,
vbap.
tables: drad,
drat.
tables: addr1_sel,
addr1_val.
tables: v_htnm, rampl,tmppf. "HTN-Abwicklung
tables: stxh. "schnellerer Zugriff auf Texte Dienstleistung
tables: t161. "Abgebotskennzeichen für Dienstleistung
*- INTERNE TABELLEN -
*- Tabelle der Positionen -
data: begin of xekpo occurs 10.
include structure ekpo.
data: bsmng like ekes-menge,
end of xekpo.
*- Key für xekpo -
data: begin of xekpokey,
mandt like ekpo-mandt,
ebeln like ekpo-ebeln,
ebelp like ekpo-ebelp,
end of xekpokey.
*- Tabelle der Einteilungen -
data: begin of xeket occurs 10.
include structure eket.
data: fzete like pekpo-wemng,
end of xeket.
*- Tabelle der Einteilungen temporär -
data: begin of teket occurs 10.
include structure beket.
data: end of teket.
data: begin of zeket.
include structure eket.
data: end of zeket.
*- Tabelle der Positionszusatzdaten -
data: begin of xpekpo occurs 10.
include structure pekpo.
data: end of xpekpo.
*- Tabelle der Positionszusatzdaten -
data: begin of xpekpov occurs 10.
include structure pekpov.
data: end of xpekpov.
*- Tabelle der Zahlungbedingungen----
data: begin of zbtxt occurs 5,
line(50),
end of zbtxt.
*- Tabelle der Merkmalsausprägungen -
data: begin of tconf_out occurs 50.
include structure econf_out.
data: end of tconf_out.
*- Tabelle der Konditionen -
data: begin of tkomv occurs 50.
include structure komv.
data: end of tkomv.
data: begin of tkomk occurs 1.
include structure komk.
data: end of tkomk.
data: begin of tkomvd occurs 50. "Belegkonditionen
include structure komvd.
data: end of tkomvd.
data: begin of tekomd occurs 50. "Stammkonditionen
include structure ekomd.
data: end of tekomd.
*- Tabelle der Bestellentwicklung -
data: begin of xekbe occurs 10.
include structure ekbe.
data: end of xekbe.
*- Tabelle der Bezugsnebenkosten -
data: begin of xekbz occurs 10.
include structure ekbz.
data: end of xekbz.
*- Tabelle der WE/RE-Zuordnung -
data: begin of xekbez occurs 10.
include structure ekbez.
data: end of xekbez.
*- Tabelle der Positionssummen der Bestellentwicklung -
data: begin of tekbes occurs 10.
include structure ekbes.
data: end of tekbes.
*- Tabelle der Bezugsnebenkosten der Bestandsführung -
data: begin of xekbnk occurs 10.
include structure ekbnk.
data: end of xekbnk.
- Tabelle für Kopieren Positionstexte (hier wegen Infobestelltext) ---
data: begin of xt165p occurs 10.
include structure t165p.
data: end of xt165p.
*- Tabelle der Kopftexte -
data: begin of xt166k occurs 10.
include structure t166k.
data: end of xt166k.
*- Tabelle der Positionstexte -
data: begin of xt166p occurs 10.
include structure t166p.
data: end of xt166p.
*- Tabelle der Anahngstexte -
data: begin of xt166a occurs 10.
include structure t166a.
data: end of xt166a.
*- Tabelle der Textheader -
data: begin of xthead occurs 10.
include structure thead.
data: end of xthead.
data: begin of xtheadkey,
tdobject like thead-tdobject,
tdname like thead-tdname,
tdid like thead-tdid,
end of xtheadkey.
data: begin of qm_text_key occurs 5,
tdobject like thead-tdobject,
tdname like thead-tdname,
tdid like thead-tdid,
tdtext like ttxit-tdtext,
end of qm_text_key.
*- Tabelle der Nachrichten alt/neu -
data: begin of xnast occurs 10.
include structure nast.
data: end of xnast.
data: begin of ynast occurs 10.
include structure nast.
data: end of ynast.
*------ Struktur zur Übergabe der Adressdaten -
data: begin of addr_fields.
include structure sadrfields.
data: end of addr_fields.
*------ Struktur zur Übergabe der Adressreferenz -
data: begin of addr_reference.
include structure addr_ref.
data: end of addr_reference.
*------ Tabelle zur Übergabe der Fehler -
data: begin of error_table occurs 10.
include structure addr_error.
data: end of error_table.
*------ Tabelle zur Übergabe der Adressgruppen -
data: begin of addr_groups occurs 3.
include structure adagroups.
data: end of addr_groups.
*- Tabelle der Aenderungsbescheibungen -
data: begin of xaend occurs 10,
ebelp like ekpo-ebelp,
zekkn like ekkn-zekkn,
etenr like eket-etenr,
ctxnr like t166c-ctxnr,
rounr like t166c-rounr,
insert,
flag_adrnr,
end of xaend.
data: begin of xaendkey,
ebelp like ekpo-ebelp,
zekkn like ekkn-zekkn,
etenr like eket-etenr,
ctxnr like t166c-ctxnr,
rounr like t166c-rounr,
insert,
flag_adrnr,
end of xaendkey.
*- Tabelle der Textänderungen -
data: begin of xaetx occurs 10,
ebelp like ekpo-ebelp,
textart like cdshw-textart,
chngind like cdshw-chngind,
end of xaetx.
*- Tabelle der geänderten Adressen -
data: begin of xadrnr occurs 5,
adrnr like sadr-adrnr,
tname like cdshw-tabname,
fname like cdshw-fname,
end of xadrnr.
*- Tabelle der gerade bearbeiteten aktive Komponenten -
data begin of mdpmx occurs 10.
include structure mdpm.
data end of mdpmx.
*- Tabelle der gerade bearbeiteten Sekundärbedarfe -
data begin of mdsbx occurs 10.
include structure mdsb.
data end of mdsbx.
*- Struktur des Archivobjekts -
data: begin of xobjid,
objky like nast-objky,
arcnr like nast-optarcnr,
end of xobjid.
Struktur für zugehörigen Sammelartikel
data: begin of sekpo.
include structure ekpo.
data: first_varpos,
end of sekpo.
*- Struktur für Ausgabeergebnis zB Spoolauftragsnummer -
data: begin of result.
include structure itcpp.
data: end of result.
*- Struktur für Internet NAST -
data: begin of intnast.
include structure snast.
data: end of intnast.
*- HTN-Abwicklung
data: begin of htnmat occurs 0.
include structure v_htnm.
data: revlv like rampl-revlv,
end of htnmat.
data htnamp like rampl occurs 0 with header line.
*- Hilfsfelder -
data: hadrnr(8), "Key TSADR
elementn(30), "Name des Elements
save_el(30), "Rettfeld für Element
retco like sy-subrc, "Returncode Druck
insert, "Kz. neue Position
h-ind like sy-tabix, "Hilfsfeld Index
h-ind1 like sy-tabix, "Hilfsfeld Index
f1 type f, "Rechenfeld
h-menge like ekpo-menge, "Hilfsfeld Mengenumrechnung
h-meng1 like ekpo-menge, "Hilfsfeld Mengenumrechnung
h-meng2 like ekpo-menge, "Hilfsfeld Mengenumrechnung
ab-menge like ekes-menge, "Hilfsfeld bestätigte Menge
kzbzg like konp-kzbzg, "Staffeln vorhanden?
hdatum like eket-eindt, "Hilfsfeld Datum
hmahnz like ekpo-mahnz, "Hilfsfeld Mahnung
addressnum like ekpo-adrn2, "Hilfsfeld Adressnummer
tablines like sy-tabix, "Zähler Tabelleneinträge
entries like sy-tfill, "Zähler Tabelleneinträge
hstap, "statistische Position
hsamm, "Positionen mit Sammelartikel
hloep, "Gelöschte Positionen im Spiel
hkpos, "Kondition zu löschen
kopfkond, "Kopfkonditionen vorhanden
no_zero_line, "keine Nullzeilen
xdrflg like t166p-drflg, "Hilfsfeld Textdruck
xprotect, "Kz. protect erfolgt
archiv_object like toa_dara-ar_object, "für opt. Archivierung
textflag, "Kz. druckrel. Positionstexte
flag, "allgemeines Kennzeichen
spoolid(10), "Spoolidnummer
xprogram like sy-repid, "Programm
lvs_recipient like swotobjid, "Internet
lvs_sender like swotobjid, "Internet
timeflag, "Kz. Uhrzeit bei mind. 1 Eint.
h_vbeln like vbak-vbeln,
h_vbelp like vbap-posnr.
*- Drucksteuerung -
data: aendernsrv.
data: xdruvo. "Druckvorgang
data: neu value '1', "Neudruck
aend value '2', "Änderungsdruck
mahn value '3', "Mahnung
absa value '4', "Absage
lpet value '5', "Lieferplaneinteilung
lpma value '6', "Mahnung Lieferplaneinteilung
aufb value '7', "Auftragsbestätigung
lpae value '8', "Änderung Lieferplaneinteilung
lphe value '9', "Historisierte Einteilungen
preisdruck, "Kz. Gesamtpreis drucken
kontrakt_preis, "Kz. Kontraktpreise drucken
we value 'E'. "Wareneingangswert
*- Hilfsfelder Lieferplaneinteilung -
data:
xlpet, "Lieferplaneinteilung
xfz, "Fortschrittszahlendarstellung
xoffen, "offene WE-Menge
xlmahn, "Lieferplaneinteilungsmahnung
fzflag, "KZ. Abstimmdatum erreicht
xnoaend, "keine Änderungsbelege da LPET
xetdrk, "Druckrelevante Positionen da LPET
xetefz like eket-menge, "Einteilungsfortschrittszahl
xwemfz like eket-menge, "Lieferfortschrittszahl
xabruf like ekek-abruf, "Alter Abruf
p_abart like ekek-abart. "Abrufart
*data: sum-euro-price like komk-fkwrt. "302203
data: sum-euro-price like komk-fkwrt_euro. "302203
data: euro-price like ekpo-effwr.
*- Hilfsfelder für Ausgabemedium -
data: xdialog, "Kz. POP-UP
xscreen, "Kz. Probeausgabe
xformular like tnapr-fonam, "Formular
xdevice(10). "Ausgabemedium
*- Hilfsfelder für QM -
data: qv_text_i like tq09t-kurztext, "Bezeichnung Qualitätsvereinb.
tl_text_i like tq09t-kurztext, "Bezeichnung Technische Lieferb.
zg_kz. "Zeugnis erforderlich
*- Hilfsfelder für Änderungsbeleg -
data: objectid like cdhdr-objectid,
tcode like cdhdr-tcode,
planned_change_number like cdhdr-planchngnr,
utime like cdhdr-utime,
udate like cdhdr-udate,
username like cdhdr-username,
cdoc_planned_or_real like cdhdr-change_ind,
cdoc_upd_object like cdhdr-change_ind value 'U',
cdoc_no_change_pointers like cdhdr-change_ind.
*- Common-Part für Änderungsbeleg -
*include zzfm06lccd.
data: begin of common part fm06lccd.
*------- Tabelle der Änderunsbelegzeilen (temporär) -
data: begin of edit occurs 50. "Änderungsbelegzeilen temp.
include structure cdshw.
data: end of edit.
data: begin of editd occurs 50. "Änderungsbelegzeilen temp.
include structure cdshw. "für Dienstleistungen
data: end of editd.
*------- Tabelle der Änderunsbelegzeilen (Ausgabeform) -
data: begin of ausg occurs 50. "Änderungsbelegzeilen
include structure cdshw.
data: changenr like cdhdr-changenr,
udate like cdhdr-udate,
utime like cdhdr-utime,
end of ausg.
*------- Tabelle der Änderunsbelegköpfe -
data: begin of icdhdr occurs 50. "Änderungbelegköpfe
include structure cdhdr.
data: end of icdhdr.
*------- Key Tabelle der Änderunsbelegköpfe -
data: begin of hkey, "Key für ICDHDR
mandt like cdhdr-mandant,
objcl like cdhdr-objectclas,
objid like cdhdr-objectid,
chang like cdhdr-changenr,
end of hkey.
*------- Key der geänderten Tabelle für Ausgabe -
data: begin of ekkey, "Tabellenkeyausgabe
ebeln like ekko-ebeln,
ebelp like ekpo-ebelp,
zekkn like ekkn-zekkn,
etenr like eket-etenr,
abruf like ekek-abruf,
ekorg like ekpa-ekorg, "Änderungsbelege Partner
ltsnr like ekpa-ltsnr, "Änderungsbelege Partner
werks like ekpa-werks, "Änderungsbelege Partner
parvw like ekpa-parvw, "Änderungsbelege Partner
parza like ekpa-parza, "Änderungsbelege Partner
consnumber like adr2-consnumber, "Änderungsbelege Adressen
comm_type like adrt-comm_type, "Änderungsbelege Adressen
end of ekkey.
data: end of common part.
*- Direktwerte -
Direktwerte *
*------- Werte zu Trtyp und Aktyp:
constants: hin value 'H', "Hinzufuegen
ver value 'V', "Veraendern
anz value 'A', "Anzeigen
erw value 'E'. "Bestellerweiterung
constants:
BSTYP
bstyp-info value 'I',
bstyp-ordr value 'W',
bstyp-banf value 'B',
bstyp-best value 'F',
bstyp-anfr value 'A',
bstyp-kont value 'K',
bstyp-lfpl value 'L',
bstyp-lerf value 'Q',
BSAKZ
bsakz-norm value ' ',
bsakz-tran value 'T',
bsakz-rahm value 'R',
BSAKZ-BEIS VALUE 'B', "not used
BSAKZ-KONS VALUE 'K', "not used
BSAKZ-LOHN VALUE 'L', "not used
BSAKZ-STRE VALUE 'S', "not used
BSAKZ-MENG VALUE 'M', "not used
BSAKZ-WERT VALUE 'W', "not used
PSTYP
pstyp-lagm value '0',
pstyp-blnk value '1',
pstyp-kons value '2',
pstyp-lohn value '3',
pstyp-munb value '4',
pstyp-stre value '5',
pstyp-text value '6',
pstyp-umlg value '7',
pstyp-wagr value '8',
pstyp-dien value '9',
Kzvbr
kzvbr-anla value 'A',
kzvbr-unbe value 'U',
kzvbr-verb value 'V',
kzvbr-einz value 'E',
kzvbr-proj value 'P',
ESOKZ
esokz-pipe value 'P',
esokz-lohn value '3',
esokz-konsi value '2', "konsi
esokz-charg value '1', "sc-jp
esokz-norm value '0'.
constants:
Handling von Unterpositionsdaten
sihan-nix value ' ', "keine eigenen Daten
sihan-anz value '1', "Daten aus Hauptposition kopiert, nicht änd
sihan-kop value '2', "Daten aus Hauptposition kopiert, aber ände
sihan-eig value '3'. "eigene Daten (nicht aus Hauptposition kopi
Unterpositionstypen
constants:
uptyp-hpo value ' ', "Hauptposition
uptyp-var value '1', "Variante
uptyp-nri value '2', "Naturalrabatt Inklusive (=Dreingabe)
uptyp-ler value '3', "Leergut
uptyp-nre value '4', "Naturalrabatt Exklusive (=Draufgabe)
uptyp-lot value '5', "Lot Position
uptyp-dis value '6', "Display Position
uptyp-vks value '7', "VK-Set Position
uptyp-mpn value '8', "Austauschposition (A&D)
uptyp-sls value '9', "Vorkommisionierungsposition (retail)
uptyp-div value 'X'. "HP hat UP's mit verschiedenen Typen
Artikeltypen
constants:
attyp-sam(2) value '01', "Sammelartikel
attyp-var(2) value '02', "Variante
attyp-we1(2) value '20', "Wertartikel
attyp-we2(2) value '21', "Wertartikel
attyp-we3(2) value '22', "Wertartikel
attyp-vks(2) value '10', "VK-Set
attyp-lot(2) value '11', "Lot-Artikel
attyp-dis(2) value '12'. "Display
Konfigurationsherkunft
constants:
kzkfg-fre value ' ', "Konfiguration sonst woher
kzkfg-kan value '1', "noch nicht konfiguriert
kzkfg-eig value '2'. "Eigene Konfiguration
constants:
c_ja type c value 'X',
c_nein type c value ' '.
Vorgangsart, welche Anwendung den Fkt-Baustein aufruft
constants:
cva_ab(1) value 'B', "Automatische bestellung (aus banfen)
cva_we(1) value 'C', "Wareneingang
cva_bu(1) value 'D', "Übernahme bestellungen aus fremdsystem
cva_au(1) value 'E', "Aufteiler
cva_kb(1) value 'F', "Kanban
cva_fa(1) value 'G', "Filialauftrag
cva_dr(1) value 'H', "DRP
cva_en(1) value '9', "Enjoy
cva_ap(1) value '1', "APO
cva_ed(1) value 'T'. "EDI-Eingang Auftragsbestätigung Update Preis
Status des Einkaufsbeleges (EKKO-STATU)
constants:
cks_ag(1) value 'A', "Angebot vorhanden für Anfrage
cks_ab(1) value 'B', "Automatische Bestellung (aus Banfen) ME59
cks_we(1) value 'C', "Bestellung aus Wareneingang
cks_bu(1) value 'D', "Bestellung aus Datenübernahme
cks_au(1) value 'E', "Bestellung aus Aufteiler (IS-Retail)
cks_kb(1) value 'F', "Bestellung aus Kanban
cks_fa(1) value 'G', "Bestellung aus Filialauftrag (IS-Retail)
cks_dr(1) value 'H', "Bestellung aus DRP
cks_ba(1) value 'I', "Bestellung aus BAPI
cks_al(1) value 'J', "Bestellung aus ALE-Szenario
cks_sb(1) value 'S', "Sammelbestellung (IS-Retail)
cks_ap(1) value '1', "APO
cks_en(1) value '9', "Enjoy Bestellung
cks_fb(1) value 'X'. "Bestellung aus Funktionsbaustein
Vorgang aus T160
constants:
vorga-angb(2) value 'AG', "Angebot zur Anfrage ME47, ME48
vorga-lpet(2) value 'LE', "Lieferplaneinteilung ME38, ME39
vorga-frge(2) value 'EF', "Einkaufsbelegfreigabe ME28, ME35, ME45
vorga-frgb(2) value 'BF', "Banffreigabe ME54, ME55
vorga-bgen(2) value 'BB', "Best. Lief.unbekannt ME25
vorga-anha(2) value 'FT', "Textanhang ME24, ME26,...
vorga-banf(2) value 'B ', "Banf ME51, ME52, ME53
vorga-anfr(2) value 'A ', "Anfrage ME41, ME42, ME43
vorga-best(2) value 'F ', "Bestellung ME21, ME22, ME23
vorga-kont(2) value 'K ', "Kontrakt ME31, ME32, ME33
vorga-lfpl(2) value 'L ', "Lieferplan ME31, ME32, ME33
vorga-mahn(2) value 'MA', "Liefermahnung ME91
vorga-aufb(2) value 'AB'. "Bestätigungsmahnung ME92
Felder für Feldauswahl (früher FMMEXCOM)
data: endmaske(210) type c,
kmaske(140) type c,
auswahl0 type brefn,
auswahl1 type brefn,
auswahl2 type brefn,
auswahl3 type brefn,
auswahl4 type brefn,
auswahl5 type brefn,
auswahl6 type brefn.
Sonderbestandskennzeichen
constants:
sobkz-kdein value 'E', "Kundeneinzel
sobkz-prein value 'Q', "Projekteinzel
sobkz-lohnb value 'O'. "Lohnbearbeiterbeistell
Min-/Maxwerte für Datenelemente
constants:
offener Rechnungseingangswert / Feldlänge: 13 / Dezimalstellen: 2
c_max_orewr like rm06a-orewr value '99999999999.99',
c_max_orewr_f type f value '99999999999.99',
c_max_orewr_x(15) type c value '**************',
c_max_proz_p(3) type p decimals 2 value '999.99', "@80545
c_max_proz_x(6) type c value '******', "@80545
c_max_menge like ekpo-menge value '9999999999.999', "@83886
c_max_menge_f type f value '9999999999.999', "@83886
c_max_netwr like ekpo-netwr value '99999999999.99', "@83886
c_max_netwr_f type f value '99999999999.99'. "@83886
Distribution Indicator Account assignment
constants:
c_dist_ind-single value ' ', "no multiple = single
c_dist_ind-quantity value '1', "quantity distribution
c_dist_ind-percent value '2'. "percentag
Datendefinitionen für Dienstleistungen
tables: eslh,
esll,
ml_esll,
rm11p.
data begin of gliederung occurs 50.
include structure ml_esll.
data end of gliederung.
data begin of leistung occurs 50.
include structure ml_esll.
data end of leistung.
data return.
*- interne Tabelle für Abrufköpfe -
data: begin of xekek occurs 20.
include structure iekek.
data: end of xekek.
*- interne Tabelle für Abrufköpfe alt----
data: begin of pekek occurs 20.
include structure iekek.
data: end of pekek.
*- interne Tabelle für Abrufeinteilungen -
data: begin of xekeh occurs 20.
include structure iekeh.
data: end of xekeh.
*- interne Tabelle für Abrufeinteilungen -
data: begin of tekeh occurs 20.
include structure iekeh.
data: end of tekeh.
*- Zusatztabelle Abruf nicht vorhanden XEKPO----
data: begin of xekpoabr occurs 20,
mandt like ekpo-mandt,
ebeln like ekpo-ebeln,
ebelp like ekpo-ebelp,
end of xekpoabr.
*-- Daten Hinweis 39234 -
*- Hilfstabelle Einteilungen -
data: begin of heket occurs 10.
include structure eket.
data: tflag like sy-calld,
end of heket.
*- Key für HEKET -
data: begin of heketkey,
mandt like eket-mandt,
ebeln like eket-ebeln,
ebelp like eket-ebelp,
etenr like eket-etenr,
end of heketkey.
data: h_subrc like sy-subrc,
h_tabix like sy-tabix,
h_field like cdshw-f_old,
h_eindt like rvdat-extdatum.
data z type i.
Defintionen für Formeln
type-pools msfo.
data: variablen type msfo_tab_variablen with header line.
data: formel type msfo_formel.
Definition für Rechnungsplan
data: tfpltdr like fpltdr occurs 0 with header line.
data: fpltdr like fpltdr.
Definiton Defaultschema für Dienstleistung
constants: default_kalsm like t683-kalsm value 'MS0000',
default_kalsm_stamm like t683-kalsm value 'MS0001'.
data: bstyp like ekko-bstyp,
bsart like ekko-bsart.
data dkomk like komk.
Defintion für Wartungsplan
tables: rmipm.
data: mpos_tab like mpos occurs 0 with header line,
zykl_tab like mmpt occurs 0 with header line.
data: print_schedule.
data: begin of d_tkomvd occurs 50.
include structure komvd.
data: end of d_tkomvd.
data: begin of d_tkomv occurs 50.
include structure komv.
data: end of d_tkomv.
Definition Drucktabellen blockweises Lesen
data: leistung_thead like stxh occurs 1 with header line.
data: gliederung_thead like stxh occurs 1 with header line. "HS
data: begin of thead_key,
mandt like sy-mandt,
tdobject like stxh-tdobject,
tdname like stxh-tdname,
tdid like stxh-tdid,
tdspras like stxh-tdspras.
data: end of thead_key.
ranges: r1_tdname for stxh-tdname,
r2_tdname for stxh-tdname.
data: begin of doktab occurs 0.
include structure drad.
data dktxt like drat-dktxt.
data: end of doktab.
Additionals Tabelle (CvB/4.0c)
data: l_addis_in_orders type line of addi_buying_print_itab
occurs 0 with header line.
Die Additionals-Strukturen müssen bekannt sein
tables: wtad_buying_print_addi, wtad_buying_print_extra_text.
data: ls_print_data_to_read type lbbil_print_data_to_read.
data: ls_bil_invoice type lbbil_invoice.
data: lf_fm_name type rs38l_fnam.
data: ls_control_param type ssfctrlop.
data: ls_composer_param type ssfcompop.
data: ls_recipient type swotobjid.
data: ls_sender type swotobjid.
data: lf_formname type tdsfname.
data: ls_addr_key like addr_key,
dunwitheket type xfeld.
data: l_zekko like ekko,
l_xpekko like pekko,
l_xekpo like table of ekpo,
l_wa_xekpo like ekpo.
data: l_xekpa like ekpa occurs 0,
l_wa_xekpa like ekpa.
data: l_xpekpo like pekpo occurs 0,
l_wa_xpekpo like pekpo,
l_xeket like table of eket with header line,
l_xekkn like table of ekkn with header line,
l_xekek like table of ekek with header line,
l_xekeh like table of ekeh with header line,
l_xkomk like table of komk with header line,
l_xtkomv type komv occurs 0,
l_wa_xtkomv type komv.
data ls_ssfcompop type ssfcompop.
*& Include /SMB40/FM06PE02
*& Form GET_PLANT_ADDRESS
FORM get_plant_address USING p_werks LIKE t001w-werks
CHANGING p_adrnr
p_sadr LIKE sadr.
parameter P_ADRNR without type since there are several address
fields with different domains
DATA: l_ekko LIKE ekko,
l_address LIKE addr1_val.
CHECK NOT p_werks IS INITIAL.
l_ekko-reswk = p_werks.
l_ekko-bsakz = 'T'.
CALL FUNCTION 'MM_ADDRESS_GET'
EXPORTING
i_ekko = l_ekko
IMPORTING
e_address = l_address
e_sadr = p_sadr.
p_adrnr = l_address-addrnumber.
ENDFORM. " GET_PLANT_ADDRESS
*& Form GET_CUSTOMER_ADDRESS
FORM get_customer_address USING p_kunnr LIKE ekpo-kunnr
CHANGING p_adrnr.
parameter P_ADRNR without type since there are several address
fields with different domains
DATA: l_adrnr LIKE kna1-adrnr.
CHECK NOT p_kunnr IS INITIAL.
SELECT SINGLE adrnr FROM kna1 INTO (l_adrnr)
WHERE kunnr = p_kunnr.
IF sy-subrc EQ 0.
p_adrnr = l_adrnr.
ELSE.
CLEAR p_adrnr.
ENDIF.
ENDFORM. " GET_CUSTOMER_ADDRESS
*& Form GET_VENDOR_ADDRESS
FORM get_vendor_address USING p_emlif LIKE lfa1-lifnr
CHANGING p_adrnr.
parameter P_ADRNR without type since there are several address
fields with different domains
DATA: l_lfa1 LIKE lfa1.
CHECK NOT p_emlif IS INITIAL.
CALL FUNCTION 'VENDOR_MASTER_DATA_SELECT_00'
EXPORTING
i_lfa1_lifnr = p_emlif
i_data = 'X'
i_partner = ' '
IMPORTING
a_lfa1 = l_lfa1
EXCEPTIONS
vendor_not_found = 1.
IF sy-subrc EQ 0.
p_adrnr = l_lfa1-adrnr.
ELSE.
CLEAR p_adrnr.
ENDIF.
ENDFORM. " GET_VENDOR_ADDRESS
*& Form get_addr_key
text
-->P_CS_BIL_INVOICE_HD_ADR text
<--P_CS_ADDR_KEY text
FORM get_addr_key
USING l_xekko LIKE ekko
CHANGING l_addr_key.
DATA: l_lfa1 LIKE lfa1.
IF l_xekko-lifnr NE space.
CALL FUNCTION 'MM_ADDRESS_GET'
EXPORTING
i_ekko = l_xekko
IMPORTING
e_sadr = sadr
EXCEPTIONS
OTHERS = 1.
MOVE-CORRESPONDING sadr TO l_lfa1.
IF sy-subrc = 0.
MOVE l_lfa1-adrnr TO ls_addr_key.
ENDIF.
ENDIF.
ENDFORM. " get_addr_key
*& Form protocol_update_I
text
--> p1 text
<-- p2 text
FORM protocol_update_i.
CHECK xscreen = space.
CALL FUNCTION 'NAST_PROTOCOL_UPDATE'
EXPORTING
msg_arbgb = syst-msgid
msg_nr = syst-msgno
msg_ty = syst-msgty
msg_v1 = syst-msgv1
msg_v2 = syst-msgv2
msg_v3 = syst-msgv3
msg_v4 = syst-msgv4
EXCEPTIONS
OTHERS = 1.
ENDFORM. " protocol_update_I
*& Form add_smfrm_prot
text
--> p1 text
<-- p2 text
FORM add_smfrm_prot.
DATA: lt_errortab TYPE tsferror.
DATA: lf_msgnr TYPE sy-msgno.
DATA: l_s_log TYPE bal_s_log,
p_loghandle TYPE balloghndl,
l_s_msg TYPE bal_s_msg.
FIELD-SYMBOLS: TYPE LINE OF tsferror.
get smart form protocoll
CALL FUNCTION 'SSF_READ_ERRORS'
IMPORTING
errortab = lt_errortab.
SORT lt_errortab.
delete adjacent duplicates from lt_errortab comparing errnumber.
add smartform protocoll to nast protocoll
LOOP AT lt_errortab ASSIGNING -msgv4
EXCEPTIONS
OTHERS = 1.
ENDLOOP.
open the application log
l_s_log-extnumber = sy-uname.
CALL FUNCTION 'BAL_LOG_CREATE'
EXPORTING
i_s_log = l_s_log
IMPORTING
e_log_handle = p_loghandle
EXCEPTIONS
OTHERS = 1.
IF sy-subrc 0.
ENDIF.
ENDLOOP.
Function module to display error logs during
smart form processing
Notice , the function 'BAL_DSP_LOG_DISPLAY' can
not be used when you using output dispatch time
4 (Send immediately), so the statement is comment
out by default.
You can enable the function call statement
if your form can not be output and you want to
see the error log. Set output dispatch time to 3
before save your order, then print or preview the
output.
DATA lv_debug.
IF NOT lv_debug IS INITIAL.
CALL FUNCTION 'BAL_DSP_LOG_DISPLAY'.
ENDIF.
ENDFORM. " add_smfrm_prot
*& Form ENTRY_NEU
text
-->ENT_RETCO text
-->ENT_SCREEN text
FORM entry_neu USING ent_retco ent_screen.
DATA: l_druvo LIKE t166k-druvo.
DATA: ls_xfz TYPE char1.
xscreen = ent_screen.
CLEAR ent_retco.
IF nast-aende EQ space.
l_druvo = '1'.
ELSE.
l_druvo = '2'.
ENDIF.
*>>> Start of Insertion >>> OSS 754573 (Liu Ke)
IF xscreen EQ 'X' AND ( nast-tdarmod EQ '2' OR nast-tdarmod EQ '3').
nast-tdarmod = '1'.
ENDIF.
*<<< End of Insertion <<<
PERFORM processing_po USING nast ls_xfz
CHANGING ent_retco ent_screen l_druvo.
ENDFORM. "entry_neu -
I'm using FusionDisplay to get a taskbar for my second monitor, and the taskbar has worked well until now. Now when I open pinned Aurora, it opens a new application and doesn't merge with the pinned down application icon.
It seems to locate the Firefox.exe to Program Files (x86)\Aurora\updated\firefox.exe, which doesn't exist. Also windows task manager right click menu for firefox.exe won't open anything when I click Open File Location.Hi. I'm having the same problem with Final versions of Mozilla applications (FF and TB) on Win7 x64 as well. I don't have Display Fusion or the likes.
This started around FF15, and happens about every other update since. This is Very frustrating. Restarting the computer fixes it though. I'd never believe I'd have to restart the computer after pretty much about every update, major or minor. Now this happened to me for both FF19->19.02, and TB 17.0.3->17.0.4 at the same time. No other software running meanwhile.
This happens for about the 3 or 4th time. It's frustrating to have to restart every now and then for a browser update.
I'll stick to a version for both (19.0.2 and 17.0.4) forever, thanks Mozilla! Couple that with the inability of most versions of TB to sustain a longer uptime than 10-15 days with no addons and just 4 pop accounts with 50-100 emails and just one with 1000. -
Form doesn't exists after calling driver program
Hi,
I had created a invoice form, and i called through driver program in se38.After executing i m getting as 'Form doesn't exists'.
'zinvoice1' is the name of the smartform.
Code as follows:
REPORT ZINVOICE1.
tables: kna1,vbrp,vbrk.
parameters: p_kunnr like vbrk-kunag,
p_vbeln like vbrk-vbeln.
data : fm_name type rs38l_fnam.
data: t_vbrp like standard table of vbrp,
t_vbrk like standard table of vbrk.
data: fs_kna1 type kna1,
fs_vbrk like line of t_vbrk,
fs_vbrp like line of t_vbrp.
start-of-selection.
select single * from kna1 into fs_kna1
where kunnr eq p_kunnr.
select * from vbrk into table t_vbrk
where kunag eq p_kunnr and vbeln eq p_vbeln.
select * from vbrp into table t_vbrp for all entries in t_vbrk
where vbeln = t_vbrk-vbeln.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
FORMNAME = 'zinvoice1'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = fm_name
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION '/1BCDWB/SF00000050'
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IM_FS_KNA1 = fs_kna1
IM_T_VBRP = t_vbrp
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
IM_T_VBRK = t_vbrk
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
FORMNAME = 'ZINVOICE1'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = fm_name
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION fm_name
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IM_FS_KNA1 = fs_kna1
IM_T_VBRP = t_vbrp
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
IM_T_VBRK = t_vbrk
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. -
I have two tables;
The first is my Order table which has a single row for each unique order - there are no duplicate order numbers.The order id column here is called
OrderID.
The second is my Submissions table which is similar to a transactions table, there are multiple submissions for every order. This table also contains an
OrderID column that contains the relevant OrderID.
The submission table also contains a calculated field called Date and a calculated field called
MaxDate field which is the date of the most recent submission that relates to any particular order in cases where there are multipple.
My goal is to add a column to the Order table this MaxDate column. The reason for duplicating the information rather than linking the tables is because I need to create more calculated columns in the
Orders table based on this value.
I have created a relationship between the two tables however when I use:
=RELATED(Submissions[MaxDate]
I get this error:
"...either doesn't exist or doesn't have a relationship to any table available in the current context"
I don't really understand why this would be, because MaxDate definitely exists and contains only numerical values. What is more strange is that if I try and combine the data through a pivot table it actually works! I can create a pivot with OrderID in the first
column and then associate it with MaxDate from the Submissions
table as the value.
Can anyone help me understand what is the problem here?
P.S. if it is useful the formula I'm using to calculate the MaxDate is:
=MAXX(FILTER(Submissions,Submissions[OrderID] = EARLIER(Submissions[OrderID])),[Date])
Thanks.Maracles, is this still an issue?
Thanks!
Ed Price, SQL Server Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it! -
Attempting to upgarde itunes and I get an error message looking for "an alternate path to a folder containing 'iTunes.msi' location. I've searched my hard drive and the file doesn't exist. What to do?
This worked...found on a prior discussion:
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page)...
http://majorgeeks.com/download.php?det=4459
From the link above (near the top of the page)....Under 'download locations' click on 'download@majorgeeks'
To install the utility, doubleclick the msicuu2.exe file you just downloaded and ran.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Restart your computer.
Re-download Itunes (latest version form Itunes website) and install. It worked! -
Message VF041 after System refresh - Billing document doesn't exists
Hi ,
We recently refreshed our QAS system and from then on we are having a strange problem .
The issue is whenever I create a billing document ,it gives me a document number ,but when I try to view this in Vf02/03 it says "Document doesn't exists"
when I checked the dump in ST22 , it says "A RAISE statement in the program ( Z print program for Invoice)raised the exception condition "FILE OPEN ERROR".
I went and changed the Dispatch time to "Send with periodically scheduled job or Send with application own transaction " and it works . But Whenever the dispatch time is "Send immediately" it fails and throws a dump.
Have anyone come across this error .We are getting this problem everytime after refresh . Do we need to do anything after refresh to avoid this kind of error.
Thanks
SridharHi,
Based on the sales order the following billing document was created. If i do VF02 to release FI posting that time system is giving the following error message.
Billing document 8230231 does not exist
Message no. VF041
Diagnosis
The billing document you specified does not exist.
This document was possibly archived.
govind -
FM: RSDRO_READ_ODS_OLAP doesn't exists
Hi Experts,
We are Rampup Customer with SP7.
We are using a Function module RSDRO_READ_ODS_OLAP in one of the customized program. This FM doesn't exists in 2004s BI.
I found FM name in the Object Navigator (SE80)in Package RSDD under RSDRO_REPORT, When I double click on FM RSDRO_READ_ODS_OLAP it says FM doesn't exist.
Can anyone Suggest me, what is the status of this FM.
Is that Under development ? Obsolete or any alternate solution for this.
Thanks.
Swamy.Hi Swamy,
this function has vanished in 7.0. This is simply the risk that you take if you use internal calls.
I suggest that you look at the RSDRI_INFOPROV_READ. It is documented albeit also an SAP-internal API. However, it is more likely to remain stable.
If you are looking for a stable BAPI then consider the OLAP BAPI.
Hope this helps.
Thomas -
Hi SRM GURUS,
I am Implementing SRM 5.5 with Extended Classic scenario, Bidding Engine and Plan driven procurement. I have question, To run this scenario, do we have install any patches?. If yes, what are those please name them. Or tell me where can I find those.
Another question: When I am trying to replicate locations (Plants). I have run the program BBP_LOCATION_GET_ALL.
The systems says that the program doesn't exist. What to do?.
Please explain .... Thanks in Advances.
Regards,
John.Hi John
BBP_LOCATIONS_GET_SELECTED .check this report too
or location in the report in se38. what are the reports do you get.
is there any syntax error while you search. i smell a rat here.
br
muthu -
Error 'Address doesn't exist '
Hi guys
I am getting an error while running the background job for delivery duelist standard report RVV50R10C with some variant
this program is being run from last few months but i got this type of error first time
the error is shown in job log as below
Message Text Message class Message No Message type
Address doesn't exist AM 010 E
Can anyone tell why and when this error message occurs .
Thanks& regards
BabuHi,
Most likely master data is incomplete. Run that program with the same variant online and set a break-point on 'message' statement to find out where the problem is. -
RV110W and QuickVPN - Servers Certificate Doesn't Exist
After a day of troubleshooting I have finally got the QuickVPN client to work. I connect however during the connection I get: "Server's certificate doesn't exist on your local computer. Do you want to quit this connection?" I click no and it connects fine other than this error. So how do I get rid of this error?
Also I have exported the client certificate from the RV110 and put it in the quickvpn directory as I saw suggested elsewhere.
Thanks,
Clint Johnson
Here is my log:
2011/12/21 00:39:44 [STATUS]Connecting...
2011/12/21 00:39:44 [DEBUG]Input VPN Server Address = ***.***.***
2011/12/21 00:39:45 [STATUS]Connecting to remote gateway with IP address: **.**.**.***
2011/12/21 00:39:50 [WARNING]Server's certificate doesn't exist on your local computer.
2011/12/21 00:39:56 [STATUS]Remote gateway was reached by https ...
2011/12/21 00:39:56 [STATUS]Provisioning...
2011/12/21 00:40:06 [STATUS]Success to connect.
2011/12/21 00:40:06 [STATUS]Tunnel is configured. Ping test is about to start.
2011/12/21 00:40:06 [STATUS]Verifying Network...
2011/12/21 00:40:11 [WARNING]Failed to ping remote VPN Router!
2011/12/21 00:40:14 [WARNING]Failed to ping remote VPN Router!I am having the same issue. I generated a certificate by selecting "Generate a New Certificate" and "Export for Client" which creates a file https.csr that I saved it into C:\Program Files (x86)\Cisco Small Business\QuickVPN Client folder.
Still get ther same error message. I click not to quit and so it continues to make the connection successfully.
After connecting though, I cannot see any of my NETWORK Shares. I can connect to my local intranet by typing in the server address directly in the browser. However, I cannot see any computers in my network. I think this is a completely different problem though and should not have anything to do with the certificate issue.
I need to resolve both these issues.
I am using Windows 7 Professional from my remote location (home) which is connected to a D-LINK router which is behind a DSL Modem. I am trying to connect to my Cisco RV-120W router at work.
Please help.
Mike -
Message "Address doesn't exist 6951" while posting GR to PO
Hello,
Trying to post a GR to a purchase order. A message comes saying "address doesn't exist 6951". While checking XK02, the system does not display the "Address" field. i.e. a run time error comes when the address field is checked. The error says
"Runtime Errors DYNPRO_NOT_FOUND"
"The system attempted to use dynpro 0000 in program "SAPLSZA1". This dynpro does not exist."
Checked the program. The exact point where the error is trigerred is while calling the sub screen i.e. "CALL SUBSCREEN ADDRESS INCLUDING 'SAPLSZA1' '0300'.
Please advise.
Note : This error is pertaining to only this vendor.
Regards,
SakthyHI,
vendor adress is stored with key "adress number" in table ADRC. Whatever the reason is, the adress number 6951 assigned to this particular vendor does not exist in table ADRC.
Best regards, Christian -
Error message "Address doesn't exist "
Dear Experts,
In ME23n, when i give some purchase order and click on ADDRESS tab it is giving the error message as "'Address doesn't exist 51457447 4601225079"", And when i check the address in ADRC table for the same vendor via ADRNR number it is providing the address
And also it displays the address in the smartform preview.
But same is not populated in the ADDRESS tab.
Anybody help
Regards,
Venki....Venki,
I once had exactly the same problem and message. It turned out that the error message was misleading..
In my case, a (custom) function module was returning an exception WITHOUT specifying a message. Subsequently the calling program also returned an exception, and simply reported the last message sitting in the SYST structure.
I recommend you set a breakpoint on the MESSAGE statement when debugging.
cheers
Paul Bakker -
Hi there - I have a Mac and use the 15.0 version of Adobe Illustrator. I can't locate the pattern tool under the 'Options' tab. I also checked the help section and it doesn't exist.
Thanks Manish!
I was following the instructions my teacher sent and there was no mention of what program the tutorial used. I ended up finding a pattern tutorial for CS5.
Rosa -
C:\programdata\apple computer\installer cache doesn't exist
I can't uninstall or upgrade QuickTime. The installer alerts with "Error getting file security: C:\ProgramData\Apple Computer\ GetLastError: 5".
The C:\ProgramData\ directory doesn't exist on my system (Win 7 Prof 64 bit on Dell laptop).
How can I get this program uninstalled and/or upgraded?
ThanksIt will most likely be there. (It's hidden by default on a Windows Vista or 7 system.)
The 5 suggests either permissions trouble or file damage. Perhaps let's first try checking on disk damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?
Maybe you are looking for
-
ICloud won't download whole msg to Windows Live Mail 2011 program if pdf attached
I just posted a message about this but think I posted it in the wrong section, so, am posting again here. Has anyone had this problem? The email arrives in Windows Live Mail 2011 program with the pdf attached but what the sender typed to me in the em
-
Problem in XML Message creation using ABAP Proxy
Hi, I am trying to send the data from ECC to CRM when post goods issue is done for a delivery from ECC side using ABP Proxy. I called my proxy method in BADI : DELIVERY_PUBLISH. And after calling the method, I used commit work also. But the problem i
-
Standard Business Content & Data Targets for Case Management & CRM Survey
Dear Friends, We are implementing CRM2007 with BW3.5 for reports for CRM Analytics. We require to Identify the Standard Data Targets & Standard Business Content (Reports) available for the following: 1. Case Management 2. CRM Survey (We have already
-
Order of Precedence in Field Selection settings for Vendor Master
Hi, There are three transactions which help define the list of mandatory, optional, suppressed and finally display only fields during vendor maintenance. These are, OMSG -> Define Account Groups and Field Selection( Vendor) OMFK -> Define Screen Layo
-
How to calculates averages and send to a file?(source code)
how to calculates averages and send to a file?(source code) I need to get started but I don't know where to begin...........the book I have doesn't really say how to handle averages and send to a file.................anybody got suggestions on how to