Entry not found in T706p

Hi all,
User is getting above error while trying to submit the expenses on ESS.
"The estimated travel amounts could not be determined."
"Entry not found in T706p"
Can anybody help urgently.
Thanks
Deepali

Yes it is maintained.
This is what i get in that table. Not sure what it means.
J     06.04.2010     05.04.2011       2011
thanks
Deepali

Similar Messages

  • Cache entry not found error message in java console 1.6.0_05 - Citrix ICA

    Client information:_
    Windows XP_SP2
    Java Runtime version 1.6.0_05
    Application: Citrix ICA version 9.4.1868
    Slow citrix ICA client connection, repeated errors in the java console stating "cache entry not found". However when I downgrade to Java Runtime version 1.5.0_10 I do not see the "cache entry not found" errors and the Citrix ICA connection is much faster. Basically launches and connects in 10 seconds versus 2 minutes.
    Any ideas? Thanks!

    Hi,
    All your classes must be accessible through the web. The easiest solution is to put all your classes in the same folder as your web page.
    If your classes are in a different folder (which must be mapped as a virtual directory), try adding the codebase attribute to your applet.
    Regards,
    Kurt.

  • Entry not found in database buffer - notif_create

    Experts
    Hopefully you can help me here because I can't find what the problem is. I created my organization structure and the business partners, there is a rule that assigns the support team based on the subject and that works perfectly great but as soon as I specified the country to the support team in transaction BP the transaction notif_create sends this error when I try to save the support notification: "Entry not found in database buffer". Message no. COM_PARTNER109
    Any help would be appreciate it

    Hi,
    Please kindly verify if these notes maybe helpful;
    1048685    Contract determination does not work correctly
    926540     Missing Organisational units
    864281     Support Desk message contains errors
    Hope this helps.
    Cheers
    SH

  • Entry not found in object buffer error in leasing quotation

    i am getting following error in SAP CRM 7.0 in quotation level.
    when i am entering financing product in quotation.
    Item 200     Entry not found in object buffer     @5F\QNo long text exists@          Dates     Administrator
    Item 200     Entry not found in object buffer     @5F\QNo long text exists@               Administrator

    thank for your reply
    At least we found out message class of this message.
    From your given Function module we could identify that it giving information  message, but we are experiencing error of object buffer related message.
    In error it showing sub object as "Dates", can you please guide us to elaborate this further.
    Regards,
    Vikil

  • Entry not found in object buffer

    Hi,
    When we create service desk message we are getting Entry not found in object buffer error error. Can you please help me out to resolve this issue.
    Thanks

    Hello again,
    Is it a customized support message (e.g. ZLFN for instance) or the standard one ? If customer message, check your action profile... You need to have a copy from the standard action SLFN0001_ADVANCED_UPDATE_DNO.
    Hope it helps.
    BR.
    Stéphane.

  • Entry not found in Table T706V

    Hi,
    When I simulate a trip I get error message "Entry not found in Table T706V  Argument JSP IN 0022420080901 is missing".
    Where JS is Trip provision copied from 40 Trip Provision. I am not undersatnding what is 00224.
    When I try this in IDES , it works with 40 Trip Provision Variant.The same config gives error in other system with trip provision variant JS.
    Rgds
    PV

    The problem was solved by changing expert control view in Travel.
    PV

  • Entries not found in table BSIS for a particular G/L Account

    Hi,
    When I display a Document through FB03  Eg. '3062000670', I can see that two G/L are being hit
    3000     1     40          5700700     LHW     2,464,177.00
    3000     2     50          1990990     GL-Initial BalUpload     2,464,177.00-
    When I goto to the table BSIS to Display the lineitems of the G/L '5700700' , no entries are found.
    I have to write a report based on the G/L Account .
    Please help.
    Salman Zahir

    Thanks for your quick answer,
    I have checked the table BSAS as well, it also has no entries corresponding the above G/Laccount.
    I can find the entries in BSEG for that G/L, but since it does not have the G/L account as primary key
    my program will take very long processing time as the user will give range of G/L accounts.
    When I Check the Report FS10N with the same G/L account, and double click to see the lineitems
    it also gives me the message 'no line items found' eventhough it shows some amount in the first screen.
    Salman Zahir

  • In Transaction code OOSB entries not found

    Hi!
      I have been suffer from problem that, in T. code OOSB when i check the entries, then the user name SAP*, Auth. profile ALL, start data and end date maintained, but when i click on Display Objects then the no entries is found. How maintain the entries.
    So i solve this problem ,please suggest me
    thanks
    ganesh

    Normally this is something you would want to deactivate, and by the sound of it this is also the case.
    If removing all entries is too much for you, just maintain what you want to keep as a minimum access for all those who do not have any other structural authorizations (in which case they have SAP*'s access...).
    Cheers,
    Julius

  • /SAPAPO/SYSDIR - Entry not found for Logical System

    Hi Guys...
    I have upgraded a new SCM 5.0 box from a database copy of APO Production. Ran the BDLS to convert the logical system pointing to Quality box. The challenge I am facing is to define a Distribution Definition in SPRO for Planned Independent Requirements. One of the values required in the Publication Definition is 'Logical System'. I need to point this APO Quality system to R/3 Quality system.
    Since this happened to be an upgrade from an APO production database, this does not have the R/3 Quality system in the list of Logical Systems when I do the drop down. All it has is the logical system name of the APO Quality System (Self) and R/3 Production System.
    When I create a new entry by manually entering the logical system name of R/3 Quality System, it says no entry found in /SAPAPO/SYSDIR. My question is, how do I populate this directory with the logical system name of R/3 Quality system? Your answer at the earliest will be highly appreciated with correct points.
    Thank you.

    Location in APO is nothing bu the Plant Master Data ( Or Vendor Master, Customer etc)
    Goto Transaction- /sapapo/loc3 to view both the plants JNa and JWA
    I think that you would have to define the integration mdoels which define what data( MASTER and TRNSACTIONAL) has to flow from R3 and APO and vice versa.
    Contact your APO Functional Team to set these up for the new logical system(SCM Quality) in the transactions- CFM1 and CFM2 and define the data which has to flow between the systems ( R3 and APO)
    For your 2 locations:
    Follow these steps in the meanwhile with the help of APO Functional Guy
    (1) Define the CONNECTIVITY steps which I have mentioned in the previous reply in R3 Quality
    (2)Goto transaction- CFM1
    Enter a model name- LOC( Any Name)
    Enter a logical system- SCM Quality
    APO Application- Lo(Any NAme)
    Select PLants check box and
    IN the right hand side- General selection options input the 2 locations- JNA and JWA in the Plant Field
    Save this and execute and then save it.
    (3) Goto CFM2 and automatically you should see the same model as you deifned in CFM1.
    Execute this.
    The above steps make sure that the Location( Or PLant) master data is sent over to APO Quality.
    Now the source system should have been changed on the location masters in APO.
    Hopefully this should resolve the issue and you will be able to enter a publication type for your locations- JNA and JNW
    There are many other steps which you need to do apart from these for your entire setup.
    Good Luck with this problem
    Regards
    Kumar

  • Path entry not found

    after downloading cs6 i can not open it. when i try it says "the procedute entry data GetlogicalProcessor information could not be located in the dynamic link library KERNEL 32.dll.
    what does this mean..and how can i correct it.
    i was able to download the software on my laptop, but apparently my ex had already used a trial of the software before and it wont allow me to utilize the trial version.
    any help will greatly be appreciated.
    thank you

    after downloading cs6 i can not open it. when i try it says "the procedute entry data GetlogicalProcessor information could not be located in the dynamic link library KERNEL 32.dll.
    Similar problems have been reported in the past trying to load Photoshop CS6 onto Windows XP SP2.
    Windows XP SP3 (free Service Pack from Microsoft) is the minimum requirement.
    http://forums.adobe.com/message/4448162
    As Jeff says, which Adobe product exactly and which operating system?

  • COGI deletion log  - AFFWPRO entries not found

    Hi Experts,
    I assume all cogi deletion entries stored in AFFWPRO table.
    If yes, I am not able to find any entries in AFFWPRO table eventhough I deleted COGIs.
    What could be the reason? Is there any special note need to apply or any functional module need to get activate?
    Need your expertise suggestions.
    Thanks in advance
    Reg
    Ramesh

    Dear Ravi,
    The above note 309050 is applicable for the versions upto 4.6C, but we are using ECC6.
    Eventhough we are using version ECC6, AFFWPRO is not getting updated (COGI deletion entries).
    Could you please suggest what I need to do?
    Regards
    Ramesh

  • Entries not found - due to index corruption?

    Dear friends,
    in the last couple of days, we run into serious trouble with our directory server.
    In our accounts, there is a unique number for every person's entry. On this attribute, we created an index.
    Everything was ok, but recently the search requests which uses this attribute in the filter went wrong. The server does find the entries by this filter.
    To make it even worse, our plugin which checks the uniqueness of this attribute does not find the existing entries as well. So, new entries are created instead of updating
    the existing accounts!
    My guess is that there is problem with that index. How can I check the index and re-build it if necessary? Or is there any other possible reason for that strange behaviour?
    We use Directory Server 5.2 SP4 on Solaris 9 SPARC, our database contains more than 60 000 entries and is about 1.3GB large.
    TIA!
    Rainer

    Hi,
    You can reindex all your suffix from the console, but the best method I think is :
    1) Add,modify, delete your indexed attributes
    2) Make your DS in READ-ONLY mode
    3) export you DB to ldif file : db2ldif -n instance -s suffix -r (if you need replica information) -a output-file
    4) Re-import you DB : ldif2db -n instance -s suffix
    During the restore, all your indexes will be recreated.
    Good luck
    Fabrizio

  • Installing CCMS on a new system. System entry not found in RZ20CEN aftr reg

    Hi Guys,
    I am trying to install CCMS for our systems. I have made all the configurations as per the "Monitoring Setup Guide
    (CEN SAP Net Weaver7.0 SPS 13)" document and refered all the help.sap.com doc's for configuring ccms.
    I have registered the system with the CEN and I see the entry for my system in CEN in RZ21. but in RZ20 on CEN I donot see the entry for my system.
    Do I need to add this manually in RZ20? Or did I miss something. If some one has come  accross this plz help.
    Thanks
    Manmath

    Hi Kunal,
    That was very helpful. I awarded you the points.
    I had just done that when I received your reply.I refered to to the  thread
    CCMS CEN Configuration for SAP 4.6C version
    Now, I have added the system to the new monitor set.
    I want to use the templates provided by SAP to set up the alerts (monitor).
    There are templates like
    SAP CCMS Monitor Templates
    SAP CCMS Monitors for Optional Components
    SAP CCMS Technical Expert Monitors
    SAP CCMS Technical Operations Templates
    How can I use the template SAP CCMS Monitor Templates ?
    Thanks
    Manmath

  • MyPC Backup.exe-Entry Not Found

    how can i fix or reinstall please?

    Based on my internet searches (http://www.solvusoft.com/en/files/error-virus-removal/exe/windows/mypcbackup-computer-backup/mypc-backup/mypc-backup-exe/), it seems that you are speaking about a third party software that is developed by Mypcbackup Computer
    Backup for Windows Operating System. If this is the case then you would need to contact their support or ask them in their forum for assistance.
    This posting is provided AS IS with no warranties or guarantees , and confers no rights.
    Ahmed MALEK
    My Website Link
    My Linkedin Profile
    My MVP Profile

  • 10g R2 AS + JPI = oracle.forms.engine.Main not found

    Greetings,
    we have a Oracle Forms & Report Services 10.1.2.0.2 installation on a RHEL box. There's need to implement JPI instead of Jinitiator, but I have encountered some problems - I have followed the instructions for dynamic JPI listed in Doc ID 368218.1. The client is XP SP3 with JRE 1.6.0_02 installed, still the end result is:
    network: Cache entry not found [url: http://xxx:7777/forms/java/oracle/forms/engine/Main.class, version: null]
    network: Connecting http://xxx:7777/forms/java/oracle/forms/engine/Main.class with proxy=DIRECT
    network: Cache entry not found [url: http://xxx:7777/forms/java/oracle/forms/engine/Main.class, version: null]
    network: Connecting http://xxx:7777/forms/java/oracle/forms/engine/Main.class with proxy=DIRECT
    load: class oracle.forms.engine.Main not found.
    java.lang.ClassNotFoundException: oracle.forms.engine.Main
         at sun.applet.AppletClassLoader.findClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at sun.applet.AppletClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at sun.applet.AppletClassLoader.loadCode(Unknown Source)
         at sun.applet.AppletPanel.createApplet(Unknown Source)
         at sun.plugin.AppletViewer.createApplet(Unknown Source)
         at sun.applet.AppletPanel.runLoader(Unknown Source)
         at sun.applet.AppletPanel.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    Caused by: java.io.IOException: open HTTP connection failed.
         at sun.applet.AppletClassLoader.getBytes(Unknown Source)
         at sun.applet.AppletClassLoader.access$100(Unknown Source)
         at sun.applet.AppletClassLoader$1.run(Unknown Source)
         at java.security.AccessController.doPrivileged(Native Method)
         ... 10 more
    basic: Exception: java.lang.ClassNotFoundException: oracle.forms.engine.Main
    I have checked ownership/permissions for frmall.jar, but they seem fine (there was a note pointing out possible ownerhsip issues).
    Any ideas/suggestions?
    Jan

    I checked 578759.1 and yes, the classid and codebase parameters seem fine.
    What happens when I open http://xxx:7777/forms/frmservlet?config=jpi is:
    - java 6 logo appears, but
    - is replaced by an X, the status bar says "Applet oracle.forms.engine.Main notinited"
    - the status bar says "Loading Java Applet Failed..."
    The whole Java Console output is:
    Java Plug-in 1.6.0_02
    Using JRE version 1.6.0_02 Java HotSpot(TM) Client VM
    User home directory = C:\Documents and Settings\myuser
    c: clear console window
    f: finalize objects on finalization queue
    g: garbage collect
    h: display this help message
    l: dump classloader list
    m: print memory usage
    o: trigger logging
    p: reload proxy configuration
    q: hide console
    r: reload policy configuration
    s: dump system and deployment properties
    t: dump thread list
    v: dump thread stack
    x: clear classloader cache
    0-5: set trace level to <n>
    load: class oracle.forms.engine.Main not found.
    java.lang.ClassNotFoundException: oracle.forms.engine.Main
         at sun.applet.AppletClassLoader.findClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at sun.applet.AppletClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at sun.applet.AppletClassLoader.loadCode(Unknown Source)
         at sun.applet.AppletPanel.createApplet(Unknown Source)
         at sun.plugin.AppletViewer.createApplet(Unknown Source)
         at sun.applet.AppletPanel.runLoader(Unknown Source)
         at sun.applet.AppletPanel.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    Caused by: java.io.IOException: open HTTP connection failed.
         at sun.applet.AppletClassLoader.getBytes(Unknown Source)
         at sun.applet.AppletClassLoader.access$100(Unknown Source)
         at sun.applet.AppletClassLoader$1.run(Unknown Source)
         at java.security.AccessController.doPrivileged(Native Method)
         ... 10 more

Maybe you are looking for