Entry of time sheets by many personnel numbers at the same time

Hi
I have a requirement from the client where time sheets to be entered by a group of employees at the same time.
2. The employee should enter the time sheet from any place out of office may be internet outside ie web enabled time sheet.
Please suggest me how to perform the above two things in the CATS.
waiting for your suggestions.
Thanks
Harish

One of them.
What about the statement in the docs isn't clear?
atomic_refresh
If this parameter is set to true, then the list of materialized views is refreshed in a single transaction. All of the refreshed materialized views are updated to a single point in time. If the refresh fails for any of the materialized views, none of the materialized views are updated.
If this parameter is set to false, then each of the materialized views is refreshed in a separate transaction.Each one becomes a separate transaction. Some may run in parallel, some serially, you have no control. So it may well be one at a time. The bigger issue, if they are separate transactions, is that if someone queries one the corresponding data may not exist in the others. Is this what you want?

Similar Messages

Ever since installing iCloud and Lion my computer is slow or freezes. The color wheel comes on and My work stops. I have only a small window of time where my computers will function normally during the day. I know many others that have the same problem.

Ever since installing iCloud and Lion my computer is slow or freezes. The color wheel comes on and My work stops. I have only a small window of time where my computers will function normally during the day. I know many others that have the same problem. I'll get 20-30 minutes of work done and then a sync or something comes on, the color wheel of death shows up, and my productivity is shot. I have to shut the computer down the hard way! when it comes back up, it is still either frozen or slow. I've checked in at the genius bar and all they say is that there have been some problems that Apple is trying to fix. It effects Mail, Contacts, Safari, Calendar....yeah, pretty much everything. My iPhone and iPad are not effected as much so I end up doing what I can with them. I've seen the blogs out there and understand that many have the same problem. I have been waiting to read about a fix but I have found nothing! Any ideas?

Not enough free space on the startup disk can slow the system down.
Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure there's a minimum of 15% free disk space.
For startup issues... open System Preferences > Users & Groups - Login Items. Delete any apps listed there then restart your mac.
And disable the Lion "resume" feature.
Open System Preferences > General
Deselect: Restore windows when quitting and re-opening apps
And Spotlight may be indexing... you can turn that off > Turning Off Spotlight | Mac Tricks And Tips

CS3 Camera Raw Too Many Files Open at the Same time alert!!!

Please help me. I keep getting this error message in Camera Raw that says there are too many files open at the same time - but I only have 100 open:( Please help - I was getting this error with CS2 and thought upgrading to CS3 would fix it and it didn't!!!

> "10 or 100 - you can quickly go through a stack of images in ACR and make any desired changes you want. Whether making the same or similar adjustment to similar files, or making radically different adjustments to different images as appropriate".
I've done this with far more than 100! I think my maximum is 425 raw files, invoking ACR from Bridge without Photoshop even loaded, and it worked well. (I've also done 115 JPEGs in order to crop them under extreme time constraints).
It can be very slick. For example, if I use a ColorChecker a number of times in a shoot, it is easy to select just the set (perhaps 100 or so) that a particular ColorChecker shot applies to and set the WB for all of them.
Furthermore, in case people don't know, you can set ratings on raw images while many of them are open in ACR. (Just click under the thumbnail). It isn't as powerful as Lightroom, but it is not to be dismissed.
I suspect that it is possible to apply sensor-dust-healing to lots of images in the same way, and certainly it is easy to apply presets based on various selections.
Perhaps with AMG (Adobe Media Gallery) it will be sensible to use the above capability to process 100s of raw files, then create a set of web pages for the best of them, in not much more time than it would have taken in Lightroom. I judge that Lightroom is the "proper" tool for the job (perhaps after 1.1!), but Bridge+ACR can go a long way.

How you create a group to send many txt msg at the same time?

How you create a group to send many txt msg at the same time?

The iPhone does not support groups for messaging. There are apps in the app store which purport to be able to do this.

How many users can view the same report at the same time in obiee answers

Hi All,
How many users can view the same report at the same time in obiee answers..?
What is max and minimum number of users.
Do we need to increase any system configuration.
Thanks,
Jagadees.

Hi,
Many users can view report at same time.It depends on the server if it can accept those many users at same time.If number of users increases OC4J may not work properly.
Refer : http://www.artofbi.com/index.php/2009/10/what-is-oc4j-an-oracle-application-server-distribution-really/
Regards,
Srikanth

Can I call two numbers at the same time on facebook?

Can I call two numbers at the same time on facebook?

thanks for your answer. Yes indeed HTML widgets run only full screen (snif snif). I consider this as a "distinguishing treatment".
One solution i read !!!!! was to create through keynote a countdown clock, to export to quicktime move and to imported at iBA predefined widgets. of course this is not the solution i need.
So, in order to have at the same widget and run together a count down clock and a preview test (20 questions) i must
1)"hack" the preview widget and insert a countdown clock
2) create a preview test using iAD.....
thanks again
haris

Forward two different dial numbers at the same time to the same destination

Hello everybody,
I need to forward two different dial numbers in the same phone (Cisco 6921) to the same destination.
I'd change the phone if it'll be necessary.
Forward from the end user web is not a valid posibility. It is neccesary to do this forward from the phone.
Any idea, suggestion or testing scenario should be appreciated.
I use CUCM 8.5
Thanks in advance.

you can mask the other number by using translation pattern

Contacts with multiple numbers under the same labe...

i
I have many contacts which have numbers saved under the same label.
For example a contact like this:
First name: A
Mobile: 11
Mobile: 22
Telephone: 33
Telephone: 44
When I open Ovi Suite / Contacts / Contacts in E51 and open the abovementioned contact "A" it shows:
A
Mobile: 11
Telephone: 44
Mobile (other): 22
As you see it deleted one of "Telephone" labeled numbers. It also happened when I used PC suite.
It is really annoying as if I save/sync the contact using Ovi, it causes loss of contacts data.
BTW there is no problem using Backup/Restore function of Ovi/PC suite, nor "Copy to memory card" function of the phone itself.
Ovi suit version : 2.1.1.1
Nokia E51 v300.34.56
Windows 7
PS:
tested another one with 6 different numbers under the same "Mobile" label
the result in Ovi is:
AA
Mobile: 11
Mobile (main): 33
Mobile (other): 22
the other 3 numbers were lost

atammin wrote:
Ah, you have an interesting setup here.
Could you answer a few clarifying questions regarding this.
> When I open Ovi Suite / Contacts / Contacts in E51 and open the abovementioned contact "A" it shows
* Did you perform a sync? Or did you just connect the phone and look at the contact card in the phone view?
I had performed sync before and realized that some contact data are missing in my phone, so I started investigating to see exactly which contacts are affected by creating some dummy contacts and editing them by clicking on my phones icon below the window of "Contacts" tab in ovi.
* Did you check the contact in your phone (using the phone's UI)? Were all the details there - or are you saying that Ovi Suite lost some of the details?
In fact both. Ovi fails to extract and show some numbers and thus fails to write them back to the phone correctly. The lost details are purged from the phone too.
Just to confirm I've understood the scenario correctly
1) you have contact card in phone with two mobile numbers (same label) and two telephone numbers (same label)
yep
2) you sync with Ovi suite
Either Sync or directly open and save contact.
3) the mobile numbers have been re-labled to Mobile and Mobile (other) but the numbers are preserved
They are re-labled only when viewed in Ovi, but written back to the phone with the same "Mobile" lable as created on the phone.
4) one of the Telephone numbers is completely lost from Ovi Suite and phone.
And this scenario happened with this setup:
- Ovi suite version : 2.1.1.1
- Nokia E51 v300.34.56
- Windows 7
I just want to be clear on the setup and scenario so we can investigate.
thanks, Aki
I also done another test
This is the contact created in phone:
BEGIN:VCARD
VERSION:2.1
N:;A
TEL;CELL:11
TEL;CELL:22
TEL;CELL:33
TEL;CELL:44
TEL;CELL:55
TEL;CELL:66
TEL;VOICE:11
TEL;VOICE:22
TEL;VOICE:33
TEL;VOICE;HOME:11
TEL;VOICE;HOME:22
TEL;VOICE;HOME:33
TEL;VOICE;WORK:11
TEL;VOICE;WORK:22
TEL;VOICE;WORK:33
X-CLASSrivate
END:VCARD
And this is what happens to contact when I just click edit and then save in Ovi.
BEGIN:VCARD
VERSION:2.1
N:;A
TEL;CELL;PREF:11
TEL;CELL:33
TEL;VOICE:33
TEL;VOICE;HOME:33
TEL;VOICE;WORK:33
END:VCARD
I also attached what ovi shows about this contact as an image.
Attachments:
displayed in ovi.PNG ‏9 KB

I am try to print a sheet of avery labels all with the same info on them. Does anyone know an application that I can do it in?

I am trying to print a sheet of avery labels all with the same info on them. Does anyone know an application that I can do it in?

Welcome to the Apple Discussion Forums! This is your first question, right?
This took a long time for me when I was printing my Avery labels. Pages doesn't seem capable of doing it, but you can do it on MS Word 2011. Try searching Google for more alternatives.

Enter more than one personnel number for the same confirmation in CO11N

More than one labor working on Machine work center simultaneously.
So that during production orders confirmation in CO11N we need to enter more than one personnel number for the same confirmation but in CO11N the system allow me to enter only one personnel number.
Note: I can not distinguish between the productions for each labor so that I can not enter separate confirmation for each labor.

Hi,
You can use the User Exit: CONFPP07 Single Screen Entry: Inclusion of User-Defined Subscreens
for this purpose..
Take help from the ABAPer for this enhancement..
Regards,
Siva

After a month of using CS6 Master, Acrobat ceased functioning. Many other customers with the same problem suggested deactivating Flash Pro to reactivate Acrobat. After following these instructions, the entire suite was deactivated and now dipalys a messag

After a month of using CS6 Master, Acrobat ceased functioning. Many other customers with the same problem suggested deactivating Flash Pro to reactivate Acrobat. After following these instructions, the entire suite was deactivated and now dipalys a message that our trial that will expire in 10 days (in the middle of an upcoming charity event). Is there any way to reactivate CS6? Is the only option to delete all CS programs? Can we download CS6 again with the same product key?

In general theory, one now has the Edit button for their posts, until someone/anyone Replies to it. I've had Edit available for weeks, as opposed to the old forum's ~ 30 mins.
That, however, is in theory. I've posted, and immediately seen something that needed editing, only to find NO Replies, yet the Edit button is no longer available, only seconds later. Still, in that same thread, I'd have the Edit button from older posts, to which there had also been no Replies even after several days/weeks. Found one that had to be over a month old, and Edit was still there.
Do not know the why/how of this behavior. At first, I thought that maybe there WAS a Reply, that "ate" my Edit button, but had not Refreshed on my screen. Refresh still showed no Replies, just no Edit either. In those cases, I just Reply and mention the [Edit].
Also, it seems that the buttons get very scrambled at times, and Refresh does not always clear that up. I end up clicking where I "think" the right button should be and hope for the best. Seems that when the buttons do bunch up they can appear at random around the page, often three atop one another, and maybe one way the heck out in left-field.
While I'm on a role, it would be nice to be able to switch between Flattened and Threaded Views on the fly. Each has a use, and having to go to Options and then come back down to the thread is a very slow process. Jive is probably incapable of this, but I can dream.
Hunt

I'm a school tech coordinator. Many computers and many iPads. How many Apple IDs can I have per device, and how many devices can have the same Apple ID? To make my life easier, I'd like 200 devices to all use the same Apple ID.

I'm a school tech coordinator. I have many computers and many iPads. I apologize if there is a some place that has all the rules governing the use of Apple IDs. I looked, and I even tried to get the answers from multiple Apple rep's. I couldn't find the answers.
How many Apple IDs can I have per device?
I want to use the same computer to sync and backup many iOS devices. The iOS devices would be associated with different Apple IDs.
I may load apps under a school Apple ID and have users load their own apps under thier own ID.
How many devices can have the same Apple ID?
Can I use the same Apple ID on all the computers in a lab?
Can I use the same Apple ID on all iPads for a particular grade level?
Are the rules different for iOS devices and computers?
I know that there are limits on "authorize" and "de-authorize" and how frequently those things can be done.
Recently I heard that for the life of an iOS device, it can only be associated with five Apple IDs. That is not good for a school giving iPads to students in a 1:1
To make my life easier, I'd like 200 devices to all use the same Apple ID.

iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html
It would be best to address your questions there, especially since this is a public forum, and over there you could post more private issues with this set-up. Not to mention, getting more official answers.

How many computers can share the same iTunes account?

How many computers can share the same iTunes account?

Hello cincip,
Thanks for the question, and welcome to Apple Support Communities. The following article provides more information on associating multiple computers with your Apple ID:
iTunes Store: Associating a device or computer to your Apple ID
http://support.apple.com/kb/HT4627
Your Apple ID can have up to 10 devices and computers (combined) associated with it. Each computer must also be authorized using the same Apple ID. Once a device or computer is associated with your Apple ID, you cannot associate that device or computer with another Apple ID for 90 days. You can view which devices or computers are currently associated, remove unused devices or computers, and see how long before they can be associated with a different Apple ID from the Account Information page in iTunes on your computer.
Thanks,
Matt M.

I have made many attempts to install the 11.1.4.62 iTunes update unsuccesfully! Error 6034, iTunes.exe has made an attempt to load the C runtime library incorrectly. I see that many people is having the same problem. How do I solve it...

I have made many attempts to install the 11.1.4.62 iTunes update unsuccesfully! Error 6034, iTunes.exe has made an attempt to load the C runtime library incorrectly. I see that many people is having the same problem. How do I solve it...

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components; this won't affect its library, but that should be backed up anyway.
(99115)

Figure numbering AND paragraph numbering in the same document

Hi everyone,
I have a document with both figure numbering and paragraph numbering. So let say I am in section 4, then the first paragraph would be "4.1. Introduction" and the first picture would be "Figure 4.1: Cool pics".
I created two different lists, one for the figure and another one for the text so that figure numbers and paragraph number don't conflict. However I cannot add the section number in the figure numbering since it's on the other list... I tried to have the figure numbering and paragraph numbering in the same list, but then the numbers conflict (e.g it gives 4.1 Introduction and Figure 4.2: Cool pics).
Can anyone help me, doing what I want (which is "4.1. Introduction" and "Figure 4.1: Cool pics")? Any help would be appreciated.
Thanks!
ps: I am using Indesign CS5.5 on a pc

Thanks for your answer Jump_Over, but my project is already divided into chapters (themselves divided in sections) in a book.
I found a way around by having the figure numbering in the same list as the paragraph numbering, the twist : while I use level 1 to 4 in paragraph numbering, I use level 5 for figure numbering with a numbering definition like ^1.^#, so no more conflict between numbers.
It's working fine so far...

Entry of time sheets by many personnel numbers at the same time

Similar Messages

Maybe you are looking for