"entry point not found" erro when starting firefox
When trying to load Firefox from my desktop I get an error that says "Firefox.exe - Entry Point not Found". And also "The procedure entry point NS_SetDIIDirectory could not be located in the dynamic link library xul.dll. Any help would be greatly appreciated. I have been using Firefox for a few years now and this just started happening.
Do a clean (re)install and delete the Firefox program folder (C:\Program Files\Mozilla Firefox\).
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 13.0.x: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you will also lose your personal data like bookmarks and passwords from profiles of other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
Similar Messages
-
I see a AppleSyncNotifier.exe - Entry Point Not Found error when my PC starts.
when booting up my computer, even before I try to bring up itunes, I get the following error message:
AppleSyncNotifier.exe - Entry Point Not Found
the procedure entry point ___cfconstantstringclassreference could not be located in the dynamic link library core foundation.dll
But once I click off the message, everything seems to work fine.
how can I correct this problem?
2 IPod 5.1.1
1 IPad 2 wifi
Windows Vista 32Try here > http://www.pchelpforum.com/xf/threads/applesyncnotifier-exe-entry-point-not-foun d.124298/
-
When I click on any link in a Thunderbird email message I get the error message:
Firefox.exe – Entry Point Not found
The procedure entry point ?DllBlocklist_Initialize@@YAXXZ could not be located in the dynamic link library T:\PQligP sFuvy (X86)\pJPpSox HneiCFv\GwCMqTQ.Oqt.
I tried uninstalling Firefox 27 completely and reinstalling it, and the error is still there. When I uninstall V27 and install the older V26 the error disappears. Id there an issue with V27 trying to work with links from Thunderbird?
I am on a laptop running Windows 8.1 with all current downloads.Thanks for the reply - as best as I can tell it seems to be some kind of incompatibility between Thunderbird V24.3.0 and Firefox V27. If I install Firefox V26 then everything works as it should. I haven't tried installing a previous version of Thunderbird to see if that makes a difference.
-
In the last few days when I start my computer, I get a box that opens with "AppleSyncNotifier.exe" Entry Point Not Found in the title.
It says: "The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQlite3.dll.
I have tried uninstalling and reinstalling iTunes and still get an error message when trying to sync my phone with iTunes
"iTunes could not back up iPhone ####, because a session could not be started with the iPhone."
The last time I tried to sync my phone (iPhone 3G S) with iTunes, everything seemed to freeze up at Stage 4 of the sync process.
Any advice????With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "SQLite3.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck -
When I try to start iTunes I get the following error message: Itunes.exe – Entry Point Not Found - The procedure entry point kCMByteStreamNotification_AvailableLengthChanged could not be located in the dynamic link library CoreMedia.dll.
Any answers how to fix it? All Im getting is error for the past 3 days!
-
When I click on Mozilla Firefox I get an error box firefox.exe - Entry Point Not Found that reads "The procedure entry point sqlite3_db_status could not be located in the dynamic link library mozsqlite3.dll."
Are you really using Windows ME?<br />
Your More system details list shows an IE8 user agent
You need to do a clean reinstall and remove the Firefox program folder before installing a newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox. -
Getting the massage when starting up PC - Apple Sync Notifier.exe - Entry Point Not Found - The procedure entry point sqlite_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. How do I eliminate this message?
I'd first try uninstalling and reinstalling your MobileMe control panel, dc. Does that clear the message up?
-
When I start up my computer, I get a window that pops up that says * AppleSyncNotifier.exe - entry point not found. it also says the procedure entry point xmltextreadername could not be located in the dynamic link library libxml2 .dll. . What does this mean and how can I get rid of it?
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck -
When starting computer get message apple snyc notifier.exe-entry point not found
when I start computer get message "apple snyc notifier.exe-entry point not found" what do i do to correct this
Had same problem yesterday, uninstalled mobile me. cured problem.
-
Since recently upgrading to the latest ITunes,on start up I get an error message:
"AppleSyncNotifier.exe Entry point not found .
Procedure entry point xml TextReader Constname could not be located in
the dynamic link library libxml2.dll"
Any body come across this? Any solutions?Doublechecking, Dad:
I have also reloaded all other iTunes software.
Did you use the following document as a guide?
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
(If we're looking at program file damage down in Apple Application Support or Apple Mobile Device Support, the 2. Verify iTunes and related components are completely uninstalled section is very important.) -
After updating to iTunes version 10.5, every time I start the computer the following error message appears: AppleSyncNotifier.exe - Entry Point Not Found. Procedure entry point xmlTextReaderName could not be located in the dynamic link library libxml2.dll? Please help
Thank you Allan123.
I have used iTunes 10.5.1 for a while without any problem but the other day I installed an application that wanted to restart my computer and iTunes did probably not shut down properly which probably caused the problems. I had to search for libxml2.dll though. Two other programs on my PC used a with the same name but I copied the one from the an Apple folder of course and pasted it where u suggested and after that everything was fine. I have no idea why this problem really occured without any real reason. But thanks for the solution! -
Why is my itunes not installing properly?
I installed itunes day before yesterday, I spent hours last night linking all my music photograph and movie files, its a new windows 8 laptop.
I plugged in my 64GB ipad 3 rebooted it and reloaded all the information I wanted on it, took hours... finally completed this this morning. After this I restarted the laptop to configure my icloud link for the laptop (which I installed last night while I was loading files, I chose to restart later)
on completion I turned my laptop off for a few hours, when I turned it back on I went to itunes to connect my iphone to do the same and I got this message:
iTunes exe - Entry Point Not Found
The procedure entry point
AVCFPlayerAppliesMediaSelectionCriteriaAutomaticallyKey could not
be located in dynamiclink library F:\Programmes\iTunes.dll
OK
then after pressing 'OK' the following message:
iTunes
iTunes was not installed correctly. Please reinstall iTunes
Error 7 (Windows error 127)
I went back to apple website to reinstall iTunes, first reinstalled it same again, then unsinstalled it and the reinstalled it, same again.
The same thing happened with my old lap top and I replaced it with this new one at the start of the week.
Has anyone any idea what is going on and how to rectify this problem, I am now going on 3 weeks without iTunes.
Regards,
Damian36I started up and plugged in my iPad and then the following message came up:
iTunes
❗️This iPad cannot be used because the required software is not
Installed. Run the iTunes installer to remove iTunes, then install
the 64-bit version of iTunes.
OK
I then proceeded to the "iTunes64Setup" expanded folder to load "AppleMobileDeviceSupport64"
Started the install and then received this message:
Apple Mobile Device Support
❗️Service 'AppleMobile Device' (Apple Mobile Device)
failed to start. Verify that you have sufficient
Privileges to start system services.
Abort. Retry. Ignore
I tried all tree options, last being ignore.
I continued to download the other 2 you suggested with out any drama.
I did a system restart and then opened iTunes.
Connected my iPad
Then message appears:
iTunes .exe - System Error
❌ The program can't start because CoreAdioToolbox.dll is missing from
Your computer. Try reinstalling the program to fix the problem.
OK
Press OK and then the next message:
iTunes
❌ iTunes was not installed correctly. Please reinstall iTunes.
Error 7 (Windows error 126)
OK
Any suggestions? -
I have a PC computer and an i-phone 4S. I set up an i-tunes acct online w/ icloud. After a recent update my PC started receiving an error message on start up. It says "AppleSyncNotifier.exe - Entry Point Not Found". It also says, " The procedure entry point smlTextreaderConstName could not be located in the dynamic link library libxml2.dll". I click on OK and it moves on. It doesn't seem to affect my computer, but it's annoying. Any ideas on correcting this?
UPDATE - (Made a second post so it'd be clearer)
I uninstalled Office 2003, then iTunes, then all of the associated software (Mobile Device Support, Apple Update, Quicktime, EVERYTHING)
Reinstalled Office 2003, then Office 2003's Service Pack 3, then all Microsoft Updates for Office 2003. Then I configured a blank Outlook profile, no data other than the IMAP info for my .Mac/Me account. Then I downloaded (didn't used my existing copy) of iTunes 7.7 and reinstalled. Sync'd phone. Changed MobileMe settings. Told it to sync contacts and calendar with Outlook. It warned me because it was the first sync. Told it to take ALL of the MobileMe data and replace the data on the computer (which was blank.) NOTHING showed up in Outlook. When I tell it to sync Contacts with the Windows Address Book, it works fine.
In Conclusion, it still won't sync with Outlook, when it's set to Sync with Outlook I still get the annoying MAPI errors. So I switched to to Sync the Contacts with the Windows Address Book, and I'm backing up my WAB file now with my nightly backups.
I suppose we'll see if it gets fixed when I format/reinstall on Vista Ultimate in the next month or two. If anyone has any suggestions, I'm open and willing to try them.
On a completely unproductive note: Despite my love for Exchange, I hate MAPI. -
I have a error message when i turn on my computer. AppleSyncNotifier.exe - Entry Point Not Found. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.
Any thoughts?Found this fix here which worked for me with a similar problem.
https://discussions.apple.com/thread/3196594?start=0&tstart=0
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well. -
When I start up my PC I get the following message. Apple Sync Notifier.exe entry point not found. Sqlite3_wal_checkpoint could not be locatedin the dynamic link library SQLite3.dll. What do I need to do to correct this?
See Troubleshooting issues with iTunes for Windows updates.
Try the repair tip in the third box first.
tt2
Maybe you are looking for
-
Does anyone know how I can sync my iphone with a new computer?
I have a new computer (PC), itunes is downloaded. I have spent most of the day using both an external hard drive and my iphone to transfer the apps, music, videos etc onto my new computer, which worked without an issue. I have deauthorised the old co
-
Error in the installation - ORACLE 10g on SUSE LES 9
Hi folks, I am installing ORACLE 10g on a SUSE LES 9 . While I launch the Installer I get the following error: Preparing to launch Oracle Universal Installer from /tmp/OraInstall2007-09-26_07-11-46AM. Please wait ...oracle@mucsapt2:/home/lrougkal/Ora
-
Multiple info records for the same material record in the catalog
Hi Guys, I have got sort of a puzzle I can not solve at the moment, maybe some one can help me to solve it. The situation in our system landscape is as follows: Systems: SRM 5.0 (Classic implementation scenario) ECC 6.0 SRM-MDM 2.0 PI 2005 Material
-
What's up with printing in Leopard??
Hey, ever since I got Leopard my printing quality from 3 different printers has got so poor. I've printed on photoshop CS3, CS2, iPhoto and Aperture from two different Canons and an Epson, one of which is at my work. The printing is so muddy looking
-
Under the column firld value new variable needs to be displayed in
hi i ahve a query presently in sap script output in main window these three fields are coming i want to add a new line ie bar code for the field value which is coming below it example present output number item total amount unitvalue 001