Entry point not found msvcr110.dll error
I have Photoshop CC and Lightroom CC both of which were working fine until I installed a PIE Primefilm XA scanner with CyberviewX software. The programs will not open since ibstalling CyberviewX. The following error appears: PSCC has a Photoshop.exe-Entry Point Not Found (The procedure entry point_crtCreateSymbolicLinkW could not be located in the dynamic link library MSVCR110.dll. Any help would be much appreciated. This error only seems to be associated with CS CC and LR CC.
Had the same problem with Lightroom 6. This solved the problem
The Program can't start because MSVCR110.dll is missing from your - Microsoft Community
Similar Messages
-
ITunes.exe - entry point not found - VideoToolbox.dll error - can't open!
hello, can somebody please help me...
Everytime i open iTunes it comes up with this error message:
The procedure entry point VTSelectAndCreateVideoDecoderInstance could not be located in the dynamics link libary VideoTookbox.dll.
I've tried uninstalling, reinstalling, and deleting all iTunes and Quickime files and programs but it still wont work...
Please help me, Thanks!*Replying to smyth_m*
So I followed the instructions and downloaded the newest version of iTunes like it told me, but after I did that, When I would attempt to get on iTunes an iTunes.exe - Entry Point Not found messege would come up. And it says The procedure entry point sqlite3preparev2 could not be located in the dynamic link library SQLite3.dll.
That's a different one, smyth. At the moment, you could try basiam's workaround from the following post:
http://discussions.apple.com/thread.jspa?messageID=10444196#10444196
... however, this could possibly cause trouble in its own right next time you upgrade iTunes, given that there will be a misplaced, older SQLite3.dll in system32 ... So be sure to remember you've got that dll down there, and if you get an odd message about SQLite3.dll when you try launching iTunes *after your next iTunes upgrade,* delete the old copy of the dll in system32 and see if you get a normal launch without it there. -
Crystal Reports 2008-Vista-ERROR-crw32.exe Entry Point Not Found in dll
Hi Experts,
I just installed the Crystal Reports 2008 (with SP0) on my Vista (Home) machine. When I try to start the CR 2008, I am getting the below error message:
Error Title: crw32.exe - Entry Point Not Found
Error Message: The procedure entry point ?PrintLegend@CMapXLegend@CSLib300@@QAEXJJJJJ@Z could not be located in the dynamic link library cslibu-3-0.dll
Here are the things I tried to resolve the above problem:
1) Uninstall and Reinstall the CR 2008. - No change.
2) I configured the DEP to accept Crystal Reports (Performance - Advanced - DEP allow).
None of these seem fix the problem.
Can you please help me kick start the Crystal Reports 2008?
Thanks,
ArunPlease try with this:
Run a command prompt as administrator. From the start menu, select "All Programs", then "Accessories" and right-click on the "Command Prompt" shortcut and choose "Run As Administrator". From here you can use the following command to disable Data Execution Prevention (DEP) with the following command:
bcdedit.exe /set nx AlwaysOff
Keeping your command prompt open, run your setup or other process being stopped by DEP. Then, to turn it back on again, do the same and run the following:
bcdedit.exe /set nx AlwaysOn
Regards,
Shweta -
Please Help me!
I Couldn't start after effect cs4. I also uninstalled and reinstalled it many times but it's giving me this error :
AfterFX.exe - Entry Point Not Found
The procedure entry point wglSwapMultipleBuffers could not be located in the dynamic library ........................ \Aif_ogl.dll.It means your graphics hardware is not compatible. Update the graphics driver and configure it suitably.
Mylenium -
Photoshop.exe - Entry Point Not Found (MSVCP80.dll)?
Hey guys, new to the board here and pretty much at the end of my rope.
Starting maybe 2 days ago I began getting quite a strange message when I tried to open Photoshop CS3.
I'd send a jpeg of the window but with photoshop down i'll settle for just typing this crap out:
Photoshop.exe - Entry Point Not Found
The Procedure entry point ?replace@?$basic_string@DU$char_traits@D@std@@V?$a llocator@D@2@@std@@qaeaav12@IIPBD@Z could not be located in the dynamic link library MSVCP80.dll
Now, that's a mouthful! Fortunately i'm at least computer literate enough to dig around on google.
After doing that, I came up with nothing. I found a replacement for the DLL that it's having trouble with, but that did nothing.
I then tried out a program called Registrybooster, which found quite a few problems with my registry but failed to correct whatever is causing this problem.
So I tried to backtrack a little bit and see if anything I had done since the last time the program worked (wednesday the prior week) had broken it. I had shut off some startup programs so i figured maybe that had something to do with it. Unfortunately undoing those changes had absolutely no effect at all.
I then tried out doing a repair install, which did nothing. After this, I did an uninstall and reinstall and... nothing.
Some extra info: I run windows xp home edition on this PC and have it updated to SP3.
I've had photoshop on it for about a year with no problems.
Hopefully someone can help me here. Almost every thread I located with similar problems via google either went unanswered or the answers given didn't actually help me out.
Someone save me!Hi Chris, thanks for chiming in on my problem.
I'm doubtful of it being TWAIN/WIA caused, but will look into it. I have a wacom tablet and a canon scanner so who knows. What would you suggest I do to see if those two are causing anything in particular? (Not sure why they would as I haven't made any changes to the programs or hardware involved recently.) -
Entry Point Not Found "pluginutils.dll"
Upgraded to Jabber 10.5 and now users are getting "ciscojabber.exe - entry point not found" can not be located in the dynamic link library PluginUtils.dll.
In our case, problem was in previous version of Cisco Jabber. Jabber 9.6.1 was not uninstalled correctly. Old Jabber client was successfully removed and problem is gone.
-
TREXFilter.exe - Entry Point Not Found / sccex.dll
Hi,
Recently we've updated our TREX to SAP Netweaver 04 Version: 6.1.16.02 Build: 6116000416
When logging on to the TREX server several popups show up with errormessage:
TREXFilter.exe - Entry Point Not Found
The procedure entry point CUCheckForEmbeddedObject could not be located
in the dynamic link library sccex.dll.
In EP
(SAP Netweaver 04 EP6 6.0.16.0.0
NW 04 EP6 KMCollaboration 6.0.16.1.0)
it's not possible to index any index (index administation).
Server status in TREX monitor is all green.
Anyone seen this before?
Any help would be welcome.
Regards,
MarkHi,
I have the same issue with TREX 6.1 revision 25 now...
Message on OSS open but still no answer.
The pop-up is preventing TREX from processing the outstanding requests in the Queue...
Any ideas?
Kr,
Michael -
I've had itunes now for a while.Now when i try and access itunes i get an error of entry point not found.and an error 7 windows error127.Says to reinstall itunes.I do and get the same result.What do I need to do....please help....
Often that's caused by damage to one of the other software components.
I'd try the following document first:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
(If you're running XP, there's a link to the equivalent instructions for that OS in the document.) -
Hi
I have tried to research these problems I am getting, but have not been able to resolve them.
1st is the above DDE Server Windows iTunes.exe - entry point not found.
This only occurs when I try to start iTunes.
if I click ok , several times, iTunes will start but slowly.
If at any time I have to reboot my computer I get
iTunesHelper.exe - the procedure entry point asl_add_log_file could not be located in the dynamic link library ASL.dll
if I click 3 times OK it goes away.
To this end I have uninstalled iTunes and rebooted my machine then gone to iTunes web site and downloaded the latest version.
Installing it but still get the same errors on reboot and trying to run iTunes
Anyone any ideas please.
I have a self build PC it has an Intel core 2 quad Q6000 @ 2.40GHz
Ram 4.00GB
32bit OS
Windows 7 Ultimate SP1
Firewall - Zonealarm
Virus - Zonealarm
Thanks in advance
Steve
Message was edited by: Ybslik
Message was edited by: YbslikTaken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever -
Downloaded new version itunes to Windows 7, now receiving error while computer is booting Apple Sync Notifier.exe- Entry Point Not Found the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite.dll., Help! How do I remove this message every time I start up Windows? Would it help to
re-install Itunes and what version??Refer to this thread - https://discussions.apple.com/message/15685210#15685210
Quick answer "copy the file SQLite3.dll from the C:\Program Files (x86)\Common Files\Apple\Apple Application Support folder to the C:\Program Files (x86)\Common Files\Apple\Mobile Device Support folder" -
When I turn on my computer, an error message says "AppleSyncNotifier.exe-entry point not found. The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll" Cannot access itunes store, sync phone, etc. Two weeks ago did this and Apple support had me remove and reinstall iTunes. Doing it again. Help....
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the libmxl2.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "libxml2.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "libxml2.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck -
I have a error message when i turn on my computer. AppleSyncNotifier.exe - Entry Point Not Found. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.
Any thoughts?Found this fix here which worked for me with a similar problem.
https://discussions.apple.com/thread/3196594?start=0&tstart=0
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well. -
Each time I update the software on my iPhone4 I get the following error message on my lap top: AppleSyncNotifier.exe - Entry Point Not Found The procedure enrty point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll
I go on line to find a solution, but it must be a common problem, why has apple not corrected yet?This is the fix I got from discussions and it worked for me. It is copied below. I just did the manual fix which I have underlined. Good luck! Regards, Belle.
This can occur because libmxl2.dll is not in your C:\Program Files\Common Files\Apple\Mobile Device Support folder.
There have been some issues with this and other dlls not being in the right place (or not being everywhere they should be) since the 10.3.1.55 iTunes update.
However, I note that the 10.4 iTunes update is now out - surprisingly quickly - so try installing that, rebooting, and see if your issue is solved.
If it isn't, though, here's the manual fix:-
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the libmxl2.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well.
I actually had the issue with SQLite3.dll, and the above fix worked for me (I found it in an April 2010 posting!).
I passed on the fix as above for the similar issue with libmxl2.dll to someone who had exactly your problem, and he reported that it fixed it for him. -
Since updating to 10.4 I've been getting this error message on computer startup
'AppleSyncNotifier.exe – Entry Point Not Found
The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll.'.
Please help me fix this annoying problem?
belleThis is the fix I got from discussions and it worked for me. It is copied below. I just did the manual fix which I have underlined. Good luck! Regards, Belle.
This can occur because libmxl2.dll is not in your C:\Program Files\Common Files\Apple\Mobile Device Support folder.
There have been some issues with this and other dlls not being in the right place (or not being everywhere they should be) since the 10.3.1.55 iTunes update.
However, I note that the 10.4 iTunes update is now out - surprisingly quickly - so try installing that, rebooting, and see if your issue is solved.
If it isn't, though, here's the manual fix:-
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the libmxl2.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well.
I actually had the issue with SQLite3.dll, and the above fix worked for me (I found it in an April 2010 posting!).
I passed on the fix as above for the similar issue with libmxl2.dll to someone who had exactly your problem, and he reported that it fixed it for him. -
After updating to iTunes version 10.5, every time I start the computer the following error message appears: AppleSyncNotifier.exe - Entry Point Not Found. Procedure entry point xmlTextReaderName could not be located in the dynamic link library libxml2.dll? Please help
Thank you Allan123.
I have used iTunes 10.5.1 for a while without any problem but the other day I installed an application that wanted to restart my computer and iTunes did probably not shut down properly which probably caused the problems. I had to search for libxml2.dll though. Two other programs on my PC used a with the same name but I copied the one from the an Apple folder of course and pasted it where u suggested and after that everything was fine. I have no idea why this problem really occured without any real reason. But thanks for the solution!
Maybe you are looking for
-
How can I get my IPad 2 to transfer a Kindle book (which I have downloaded) to my I tunes I was able to get it on my desk top (PC) but it wouldn't sync toI tunes books Thanks Ralph
-
Ios5 iMessage on multiple devices with a single apple id
I have 2 iphones and a ipad, how do i message individual devices, at the moment any message i said shows on all three devices, very confused here. Any help appreciated.
-
SOAP Exception, Connection refused error in jdeveloper 11g
Hello, I am using jdeveloper 11g 11.1.2.3.0. I have been experiencing the following error everytime I try to run the applicaiton. I use webservices in my applicaiton and recently the webservices url were changed pointing now to dev instead of the lab
-
Isync for RAZR worked on powerbook, but not working on new MacBook Pro
Hello -- I've been syncing my RAZR for the past year using my G4 Powerbook - no problems. I've just bought a MacBook Pro, and am trying to get the RAZR to sync to it. I was able to set up the bluetooth connection no problem, but iSync doesn't seem to
-
How to get a scroll pane to scroll as text is appended to it?
Hi All, I have a file management GUI with a JTextArea. As the application processes files, a string is appended to a textarea (in a scrollpane viewport) telling the user when a file has been copied, deleted etc. The problem is that when number of lin