Entry point not found prevents startup of Indesign in CS4

After installing the update for Indesign CS4, ver. 6.0.2, I cannot start the program. When I try to start it, I get the following 2 boxes and then the program closes: (1) Box 1 is titled "Font Capture:InDesign.exe - Entry Point Not Found" and says:"The procedure entry point ?GetSerialNumberDecrypted@SerialNumberPrivate@@SA?AVPMString @@XZ could not be located in the dynamic link library Public.dll. (2) Box 2 is titled "Font Capture:InDesign.exe - Entry Point Not Found" and says:"The procedure entry point ?CanHaveKeyFocus@WOWFlashPlayerEventHandler@@UBEFXZ could not be located in the dynamic link library WidgetBind.dll."
Does anyone have a clue about how to fix this? This renders a pretty expensive piece of software completely inoperable, and Adobe's support website does not have a solution. Thanks!

I had to uninstall and reinstall Indesign. It now works fine. Here is the response I got from Adobe support, which worked:
Most likely, the update did not apply correctly and the InDesign installation has become corrupted. Please remove InDesign from the Creative Suite® 4 by going to Start> Control Panel> Programs and Features. Select the Creative Suite from the menu and click the Uninstall/Change button. Select to only remove InDesign from the Suite and proceed through the uninstaller.
Once it removed reinstall InDesign from your installation disc or download.
For additional troubleshooting steps, please refer to this knowledge base document: http://go.adobe.com/kb/ts_kb404723_en-us

Similar Messages

TS1286 At my PC startup, I get an error message "AppleSyncNotifier.exe--Entry Point Not Found" My iPhone now doesn't show up as a Device in either iTunes or My Computer on my PC. I've uninstalled/ reinstalled iTunes & run diagnostics-no luck. Ideas?

At my PC startup, I get an error message "AppleSyncNotifier.exe--Entry Point Not Found" My iPhone now doesn't show up as a Device in either iTunes or My Computer on my PC. I've uninstalled/ reinstalled iTunes & run diagnostics-no luck. Ideas?

I think my problem is fixed now.
For the fun of it, I reinstalled iTunes 9.2.1 today (using the exact same installer as I did yesterday), but this time I didn't uninstall iTunes first. As expected, iTunes recognized my iPhone (as I expected it to, until my next reboot).
A few minutes later, Software Update showed up and among the updates is "iPhone SDK Compatibility Update". The description indicates that installing this should fix an issue where iPhones and iPod touches aren't recognized by iTunes. Isn't that interesting?
I installed that update and most of the others waiting for me (including Java, Safari 5.0.1, and a few others - not 10.6.4 though, due to the issues with nVidia graphics cards). After the reboot, I started iTunes, and it saw my iPhone!
So, if you're having this same problem, I'd recommend tracking down this update and see if that does the trick for you. Hopefully it will.

Since updating to 10.4 getting error message on startup 'AppleSyncNotifier.exe – Entry Point Not Found, The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll.'. How do I fix this annoying problem?

Since updating to 10.4 I've been getting this error message on computer startup
'AppleSyncNotifier.exe – Entry Point Not Found
The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll.'.
Please help me fix this annoying problem?
belle

This is the fix I got from discussions and it worked for me. It is copied below. I just did the manual fix which I have underlined. Good luck! Regards, Belle.
This can occur because libmxl2.dll is not in your C:\Program Files\Common Files\Apple\Mobile Device Support folder.
There have been some issues with this and other dlls not being in the right place (or not being everywhere they should be) since the 10.3.1.55 iTunes update.
However, I note that the 10.4 iTunes update is now out - surprisingly quickly - so try installing that, rebooting, and see if your issue is solved.
If it isn't, though, here's the manual fix:-
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the libmxl2.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well.
I actually had the issue with SQLite3.dll, and the above fix worked for me (I found it in an April 2010 posting!).
I passed on the fix as above for the similar issue with libmxl2.dll to someone who had exactly your problem, and he reported that it fixed it for him.

Crystal Reports 2008-Vista-ERROR-crw32.exe Entry Point Not Found in dll

Hi Experts,
I just installed the Crystal Reports 2008 (with SP0) on my Vista (Home) machine. When I try to start the CR 2008, I am getting the below error message:
Error Title: crw32.exe - Entry Point Not Found
Error Message: The procedure entry point ?PrintLegend@CMapXLegend@CSLib300@@QAEXJJJJJ@Z could not be located in the dynamic link library cslibu-3-0.dll
Here are the things I tried to resolve the above problem:
1) Uninstall and Reinstall the CR 2008. - No change.
2) I configured the DEP to accept Crystal Reports (Performance - Advanced - DEP allow).
None of these seem fix the problem.
Can you please help me kick start the Crystal Reports 2008?
Thanks,
Arun

Please try with this:
Run a command prompt as administrator. From the start menu, select "All Programs", then "Accessories" and right-click on the "Command Prompt" shortcut and choose "Run As Administrator". From here you can use the following command to disable Data Execution Prevention (DEP) with the following command:
bcdedit.exe /set nx AlwaysOff
Keeping your command prompt open, run your setup or other process being stopped by DEP. Then, to turn it back on again, do the same and run the following:
bcdedit.exe /set nx AlwaysOn
Regards,
Shweta

Photoshop.exe - Entry Point Not Found (MSVCP80.dll)?

Hey guys, new to the board here and pretty much at the end of my rope.
Starting maybe 2 days ago I began getting quite a strange message when I tried to open Photoshop CS3.
I'd send a jpeg of the window but with photoshop down i'll settle for just typing this crap out:
Photoshop.exe - Entry Point Not Found
The Procedure entry point ?replace@?$basic_string@DU$char_traits@D@std@@V?$a llocator@D@2@@std@@qaeaav12@IIPBD@Z could not be located in the dynamic link library MSVCP80.dll
Now, that's a mouthful! Fortunately i'm at least computer literate enough to dig around on google.
After doing that, I came up with nothing. I found a replacement for the DLL that it's having trouble with, but that did nothing.
I then tried out a program called Registrybooster, which found quite a few problems with my registry but failed to correct whatever is causing this problem.
So I tried to backtrack a little bit and see if anything I had done since the last time the program worked (wednesday the prior week) had broken it. I had shut off some startup programs so i figured maybe that had something to do with it. Unfortunately undoing those changes had absolutely no effect at all.
I then tried out doing a repair install, which did nothing. After this, I did an uninstall and reinstall and... nothing.
Some extra info: I run windows xp home edition on this PC and have it updated to SP3.
I've had photoshop on it for about a year with no problems.
Hopefully someone can help me here. Almost every thread I located with similar problems via google either went unanswered or the answers given didn't actually help me out.
Someone save me!

Hi Chris, thanks for chiming in on my problem.
I'm doubtful of it being TWAIN/WIA caused, but will look into it. I have a wacom tablet and a canon scanner so who knows. What would you suggest I do to see if those two are causing anything in particular? (Not sure why they would as I haven't made any changes to the programs or hardware involved recently.)

Applephotostreams.exe entry point not found error

In the last several weeks I've been receiving the following error message upon startup of my Windows 7 PC:
applephotostreams.exe entry point not found
I've tried searching for similar error messages on the web and in this forum without finding a solution. I'm also receiving a similar error message for ubd.exe on startup as well. Any suggestions for repairing this problem would be appreciated.

A quick search on Google suggests this problem is associated with FlyakiteMacosX plug in.
Do you have that installed on your computer?
If so, have a look at this web page .

When I turn on my computer I get the message APPLESyncNotifer.exe Entry Point not found.

Have a 5th generation nano and when I connect to my computer I get a message APPLESyncNotifer.exe Entry Point Not Found. Not a computer geek so I am stumped. Anyone out there who could help? I have reinstalled ITunes and restarted my computer to not avail.

Copying & pasting SQLIte3.dll worked out well for your computer?
Just read your trouble with your iPod nano 5th generation & Windows PC, how about trying the one I found on this community before?
Click the start button and type in 'msconfig' in search, and, in system structure utitily, click on the tab of 'startup' and check off the box of 'AppleSyncnotifier.exe' and reboost your system.(You have to follow down till the end of the place of the file.) That'll solve your trouble.
I don't know you connect iPad or iPhone at all, that may change the solution? Hoping this suggestion also work out for you & your PC.

APSdaemon.exe entry point not found? also itunes won't open.

ever since i updated my itunes/quicktime, this has been popping up at startup. today i tried opening itunes and i also got an error "itunes.exe entry point not found. the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll". earlier, i had an error with sqlite3 but i managed to fix it my copying the file elsewhere.
not sure whats going on though. thanks for the help in advance.

Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. Now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post:
Re: I recently updated to vista service pack 2 and I updated to itunes

ITunes Helper.exe - Entry point not found error after upgrade

I just tried to install the latest iTunes software for Windows on two separate PCs running XP Pro SP3 and get the same error on both PCs at every windows startup: iTunes Helper.exe - Entry point not found. The procedure entry point sqlite3preparev2 could not be located in the dynamic link library SQLite3.dll. Is this a known issue with a fix?

Hmmm. Roy B has some advice on that one in the following post:
http://discussions.apple.com/thread.jspa?messageID=10208523&#10208523

AppleSyncNotifier.exe - Entry Point Not Found: The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll

Ever since I recently upgrading Itunes, I cannot access the Itunes store, my phone will not sync to my laptop, and this pops up everytime I restart my computer: "AppleSyncNotifier.exe - Entry Point Not Found: The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll" I have tried several things without success. Can someone PLEASE tell me what else I can try. Thanks!

Hi Janice - glad to hear you got one of your problems sorted
I understand that your phone doesn't sync automatically when you connect it to your PC with iTunes running. First question is do you see that your phone is connected in iTunes when you plug it in? It should show on the left side of the page about halfway. Usually if you haven't already started iTunes, when you connect your phone to the PC it will open autoamtically and you will see the phone is connected.
If it doesn't show as connected then I refer you to this page
I can tell you that my phone doesn't sync automatically because I didn't want it to, I've purposefully set it on iTunes to sync manually. I do it by left clicking on where my phone shows there and in the page that comes up I click Sync. If you want it to operate automatically then you need to set it to do so. You have that option by clicking on EDIT at the top left of itunes - then PREFERENCES - DEVICES and uncheck 'prevent devices from syncing automatically'. There may also be something to click on the phone page to sync automatically.
For the 'conflict' issue I refer you to this discussion where others have already offered advice.
Good luck with it Janice, and again, let me know how you get on.

TREXFilter.exe - Entry Point Not Found / sccex.dll

Hi,
Recently we've updated our TREX to SAP Netweaver 04 Version: 6.1.16.02 Build: 6116000416
When logging on to the TREX server several popups show up with errormessage:
TREXFilter.exe - Entry Point Not Found
The procedure entry point CUCheckForEmbeddedObject could not be located
in the dynamic link library sccex.dll.
In EP
(SAP Netweaver 04 EP6 6.0.16.0.0
NW 04 EP6 KMCollaboration 6.0.16.1.0)
it's not possible to index any index (index administation).
Server status in TREX monitor is all green.
Anyone seen this before?
Any help would be welcome.
Regards,
Mark

Hi,
I have the same issue with TREX 6.1 revision 25 now...
Message on OSS open but still no answer.
The pop-up is preventing TREX from processing the outstanding requests in the Queue...
Any ideas?
Kr,
Michael

Error message when clicking on links from thunderbird: Firefox.exe – Entry Point Not found

When I click on any link in a Thunderbird email message I get the error message:
Firefox.exe – Entry Point Not found
The procedure entry point ?DllBlocklist_Initialize@@YAXXZ could not be located in the dynamic link library T:\PQligP sFuvy (X86)\pJPpSox HneiCFv\GwCMqTQ.Oqt.
I tried uninstalling Firefox 27 completely and reinstalling it, and the error is still there. When I uninstall V27 and install the older V26 the error disappears. Id there an issue with V27 trying to work with links from Thunderbird?
I am on a laptop running Windows 8.1 with all current downloads.

Thanks for the reply - as best as I can tell it seems to be some kind of incompatibility between Thunderbird V24.3.0 and Firefox V27. If I install Firefox V26 then everything works as it should. I haven't tried installing a previous version of Thunderbird to see if that makes a difference.

Why is my itunes not installing properly? I installed it and it was fine, then it started to show Errors. iTunes exe - Entry Point not Found. And the Error 7 (Windows error 127).Itsays to reinstall iTunes. I did that and same error. new pc, same on old

Why is my itunes not installing properly?
I installed itunes day before yesterday, I spent hours last night linking all my music photograph and movie files, its a new windows 8 laptop.
I plugged in my 64GB ipad 3 rebooted it and reloaded all the information I wanted on it, took hours... finally completed this this morning. After this I restarted the laptop to configure my icloud link for the laptop (which I installed last night while I was loading files, I chose to restart later)
on completion I turned my laptop off for a few hours, when I turned it back on I went to itunes to connect my iphone to do the same and I got this message:
iTunes exe - Entry Point Not Found
The procedure entry point
AVCFPlayerAppliesMediaSelectionCriteriaAutomaticallyKey could not
be located in dynamiclink library F:\Programmes\iTunes.dll
                                                                                           OK
then after pressing 'OK' the following message:
iTunes
iTunes was not installed correctly. Please reinstall iTunes
Error 7 (Windows error 127)
I went back to apple website to reinstall iTunes, first reinstalled it same again, then unsinstalled it and the reinstalled it, same again.
The same thing happened with my old lap top and I replaced it with this new one at the start of the week.
Has anyone any idea what is going on and how to rectify this problem, I am now going on 3 weeks without iTunes.
Regards,
Damian36

I started up and plugged in my iPad and then the following message came up:
       iTunes
❗️This iPad cannot be used because the required software is not
    Installed. Run the iTunes installer to remove iTunes, then install
    the 64-bit version of iTunes.
                                                                                         OK
I then proceeded to the "iTunes64Setup" expanded folder to load "AppleMobileDeviceSupport64"
Started the install and then received this message:
      Apple Mobile Device Support
❗️Service 'AppleMobile Device' (Apple Mobile Device)
    failed to start. Verify that you have sufficient
    Privileges to start system services.
   Abort.               Retry.                Ignore
I tried all tree options, last being ignore.
I continued to download the other 2 you suggested with out any drama.
I did a system restart and then opened iTunes.
Connected my iPad
Then message appears:
      iTunes .exe - System Error
❌ The program can't start because CoreAdioToolbox.dll is missing from
      Your computer. Try reinstalling the program to fix the problem.
                                                                                       OK
Press OK and then the next message:
       iTunes
❌ iTunes was not installed correctly. Please reinstall iTunes.
      Error 7 (Windows error 126)
                                                                                       OK
Any suggestions?

When I connect my new ipod nano to my laptop (using windows)I get an error message saying "itunes.exe - entry point not found" I cannot access my itunes , or download a new version. Any ideas what to do or what is causing this?

I have been given a new ipod nano to replace my much loved but old ipod. When I plug it into my laptop to sync it I get an error message stating "itunes.exe - entry point not found. The procedure entry point AVCFAAssetCreateWithByteStreanAndOptions could not be located in the dynamic link library
AVFoundationCF.dll" I cannot acces my itunes or download a new versiona as this keeps flashing up. Any ideas? Please help, my life is meaningless without my music!!

Also I now can`t access any of my itunes library and am concerned that if I remove it from my computer I will lose everything as I have no option of accessing and therefore backing anything up. Any ideas?

I see a AppleSyncNotifier.exe - Entry Point Not Found error when my PC starts.

when booting up my computer, even before I try to bring up itunes, I get the following error message:
AppleSyncNotifier.exe - Entry Point Not Found
the procedure entry point ___cfconstantstringclassreference could not be located in the dynamic link library core foundation.dll
But once I click off the message, everything seems to work fine.
how can I correct this problem?
2 IPod 5.1.1
1 IPad 2 wifi
Windows Vista 32

Try here > http://www.pchelpforum.com/xf/threads/applesyncnotifier-exe-entry-point-not-foun d.124298/

Entry point not found prevents startup of Indesign in CS4

Similar Messages

Maybe you are looking for