Entry point 'Test Batch' does not exist

Hi Forum
 I am in the process of upgrading one of our testsystems from TestStand version 3.1 to version 4.1.
The system is started up by a Labview app which calls TS by a command line call (-runEntryPoint  "Test Batch"  "C:\..."). However, TS 4.1 doesn't recognize the "Test Batch" entry point (worked fine in 3.1), and I get an error box with the message "entry point 'Test Batch' does not exist". I have checked that the entry point exist in the sequence model file, and if I go to the "Execute" menu, I get the choice to run "Test Batch".
I am able to se the -run command, but then I, for some reason, don't get the entire sequence.
Any suggestions to what I am doing wrong? I am logged in to TS automatically with my windows login.
B.R.
Martin
Solved!
Go to Solution.

Hi,
There should be a document in \Conponents\NI\Models\... which should give you the basics for the various process models.
here is some other references that may help
http://zone.ni.com/devzone/cda/tut/p/id/7958
http://digital.ni.com/public.nsf/allkb/D9E7A0BDDDA​2A87886256FD9007598D2
Check out some of the related links
http://zone.ni.com/devzone/cda/tut/p/id/3819
Regards
Ray Farmer
Message Edited by Ray Farmer on 09-24-2009 11:00 AM
Regards
Ray Farmer

Similar Messages

  • Error message: Entry 1 WC 99 does not exist in T508A (check entry)

    Can anyone please tell me what does the error message Entry "1 WC 99" does not exist in T508A (check entry) means? I was trying to 'generate work schedule manually' when got this error.  In the above error message, 1 means employee subgroup grouping.....WC is Holiday Calender......and 99 is personal subarea grouping.....
    I went to the table using se16 but could not make out how I can input those entries in the table....
    Edited by: Parveez Sazzad on Feb 26, 2011 4:56 PM

    you have to check this table from SM30 Tcode and give V_T508A table here we have to configure DWSR and than we have to generate the WSR

  • Processing routine ENTRY in program ZRVADIN0111 does not exist for smartfor

    Hi ,
    This is the log , I am getting in vf02 ..
    ==========log==============
    Message Text
    Processing routine ENTRY in program ZRVADIN0111 does not exist
    Technical Data
    Message type__________ E (Error)
    Message class_________ VN (Output control)
    Message number________ 068
    Message variable 1____ ENTRY
    Message variable 2____ ZRVADIN0111
    Message variable 3____ 
    Message variable 4____ 
    Message Attributes
    Level of detail_______ 
    Problem class_________ 0
    Sort criterion________ 
    Number________________ 1
    ======================================end log========================
    My driver program is same as below and form is ZSUNDRY_INVOICES_VENU'
    ================my driver program ===================
    *& Report  ZRVADIN0111
    REPORT  ZRVADIN0111.
    TABLES : nast.
    *TYPES : BEGIN OF ty_header,
           vbeln TYPE vbeln_vf,
           fkdat TYPE fkdat,
           XBLNR TYPE XBLNR_V1,
           STCEG TYPE STCEG,
           kunrg TYPE KUNRG,
           name1 TYPE AD_NAME1,
           city1 TYPE AD_CITY1,
           post_code1 TYPE AD_PSTCD1,
           street TYPE AD_STREET,
           total TYPE NETWR_FP,
           END OF ty_header.
    DATA : sum TYPE i VALUE '0'.
    *TYPES : BEGIN OF ty_item,
           matnr TYPE matnr,
           arktx TYPE arktx,
           fkimg TYPE fkimg,
           VRKME TYPE VRKME,
           netwr TYPE NETWR_FP,
           MWSBP TYPE MWSBP,
           unipr TYPE NETWR_FP,
           END OF ty_item.
    DATA : gs_header TYPE zsd_inv_header,
           it_item TYPE STANDARD TABLE OF zsd_inv_items.
    FIELD-SYMBOLS : <fs_item> TYPE zsd_inv_items.
    DATA : gv_adrnr TYPE adrnr.
    *data: s_vbeln type vbeln_vf.
    *select-options : so_vbeln for s_vbeln.
    *START-OF-SELECTION.
    *form entry.
    *--- Get header
      SELECT SINGLE vbeln fkdat xblnr stceg kunrg bukrs
               FROM vbrk INTO gs_header
               WHERE vbeln = nast-objky.
      SELECT matnr arktx fkimg vrkme netwr mwsbp
           INTO CORRESPONDING FIELDS OF TABLE it_item
           FROM vbrp WHERE vbeln = gs_header-vbeln.
        LOOP AT it_item ASSIGNING <fs_item>.
          <fs_item>-unipr = <fs_item>-netwr / <fs_item>-fkimg.
          sum = sum + <fs_item>-netwr.
          ENDLOOP .
          gs_header-total = sum.
          CLEAR : gv_adrnr.
    SELECT SINGLE adrnr FROM kna1 INTO gv_adrnr WHERE kunnr = gs_header-kunrg.
       SELECT SINGLE name1 city1 post_code1 street FROM adrc
              INTO (gs_header-name1,gs_header-city1,gs_header-post_code1,gs_header-street)
              WHERE ADDRNUMBER = gv_adrnr.
    *end-OF-SELECTION.
    data: fm_name type rs38l_fnam.
    ****calling entry routine
    *FORM entry USING return_code us_screen.
    CLEAR retcode.
    xscreen = us_screen.
    PERFORM processing USING us_screen.
    CASE retcode.
       WHEN 0.
         return_code = 0.
       WHEN 3.
         return_code = 3.
       WHEN OTHERS.
         return_code = 1.
    ENDCASE.
    *ENDFORM.                    "entry
    calling smartfrom from ABAP
    call function 'SSF_FUNCTION_MODULE_NAME'
      exporting
        formname                 = 'ZSUNDRY_INVOICES_VENU'
      VARIANT                  = ' '
      DIRECT_CALL              = ' '
      IMPORTING
        FM_NAME                  = FM_NAME
      EXCEPTIONS
        NO_FORM                  = 1
        NO_FUNCTION_MODULE       = 2
        OTHERS                   = 3.
    if sy-subrc <> 0.
       WRITE: / 'ERROR 1'.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    endif.
    CALL FUNCTION fm_name
      EXPORTING
      ARCHIVE_INDEX              =
      ARCHIVE_INDEX_TAB          =
      ARCHIVE_PARAMETERS         =
      CONTROL_PARAMETERS         =
      MAIL_APPL_OBJ              =
      MAIL_RECIPIENT             =
      MAIL_SENDER                =
      OUTPUT_OPTIONS             =
      USER_SETTINGS              = 'X'
        IS_HEADER                  = gs_header
    IMPORTING
      DOCUMENT_OUTPUT_INFO       =
      JOB_OUTPUT_INFO            =
      JOB_OUTPUT_OPTIONS         =
      TABLES
        IT_ITEMS                   = it_item
    EXCEPTIONS
      FORMATTING_ERROR           = 1
      INTERNAL_ERROR             = 2
      SEND_ERROR                 = 3
      USER_CANCELED              = 4
      OTHERS                     = 5
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    *call function FM_NAME
    EXPORTING
      ARCHIVE_INDEX              =
      ARCHIVE_INDEX_TAB          =
      ARCHIVE_PARAMETERS         =
      CONTROL_PARAMETERS         =
      MAIL_APPL_OBJ              =
      MAIL_RECIPIENT             =
      MAIL_SENDER                =
      OUTPUT_OPTIONS             =
      USER_SETTINGS              = 'X'
    IMPORTING
      DOCUMENT_OUTPUT_INFO       =
      JOB_OUTPUT_INFO            =
      JOB_OUTPUT_OPTIONS         =
    TABLES
       GS_MKPF                    = INT_MKPF
    EXCEPTIONS
       FORMATTING_ERROR           = 1
       INTERNAL_ERROR             = 2
       SEND_ERROR                 = 3
       USER_CANCELED              = 4
       OTHERS                     = 5.
    *if sy-subrc <> 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    *endif.
    end of call function module from abap
    *endform.
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    can any body help me with proper code , i have to insert in driver program ..to retify error ...
    thanks
    Regards,
    Venu.

    Call transaction NACE (type V1 for Sales Order) look for the required output type and check program and form in processing routines. (and add code markups when you copy source code in forums)
    Regards,
    Raymond

  • Object directory entry R3TR EVEN EVEN_BEY5RHD67LRF9UT6G9LXEZUK6 does not exist

    Hi BW Experts,
    I´m facing a Problem while releasing a Transport from Dev to Quality System. The consisty check shows the following objekt as not available:
    Object directory entry R3TR EVEN EVEN_BEY5RHD67LRF9UT6G9LXEZUK6 does not exist
    A check for the Object: R3TR EVEN showed that it is a Event Collector which seems to be missing. The transport consists a process chain which listens to an event. Is this the mentioned Object or is it related to some different topic? The process chain is correct and activated.
    Thanks in advance for your help.
    Best regards
    Christian

    Hi Abdullah,
    I followed your advice and did a check if the object was writen to my transport. The object was missing on the transport. But also searching in transport connection did not help.
    So I had a look into the table TADIR and also here I could not find the mentioned object which was realy strange to me, as the process chain was active and correct.
    I than deleted the event collector(AND) object in the process chain and created a new one. A check in the table TADIR now showed the before invisible EVEN_BEY5RHD67LRF9UT6G9LXEZUK6 and also the new one created. The new EVEN Object(and also the old deleted one) was written to the transport. Importing it into Quality System worked without any problems.
    I´m not 100% sure about this behaviour but maybe its linked to the fact that the process chain was a result from the Dataflow migration wizzard. Maybe while migrating that dataflow something went wrong.
    Anyway, thanks to all of you for your help!
    Best regards
    Christian

  • Error "Processing routine ENTRY in program ztest does not exist"

    Hi All ,
               I facing problem in Samrt form  driver program
            Error "Processing routine ENTRY in program ztest does not exist"
             when i given print through T.Code Me22n
             Can you suggest  me why i facing this problem.........
      This is below my driver program code:
    Moderator message - Please respect the 2,500 character maximum when posting. Post only the relevant portions of code
    Edited by: Rob Burbank on Mar 10, 2010 9:53 AM

    Hi nIck,
             I  write the code this way
              can you suggest me any changes are require
      FORM ENTRY USING RETURN_CODE TYPE I US_SCREEN TYPE C.
      PERFORM DATA_FETCH.
      PERFORM DATA_PROCESS.
      PERFORM CALL_FORM.
    ENDFORM.                    "entry
    *&      Form  data_fetch
          text
    FORM DATA_FETCH.
      PONUMBER = NAST-OBJKY.
    ENDFORM.                    "data_fetch
    Regards
    Raju
    Edited by: raju mahapatra on Mar 11, 2010 7:23 AM

  • Processing routine ENTRY in program ZINVOICE does not exist

    Hi all,
    I am finding an error after taking the print out of Excise Invoice in Tcode J1IP.
         We had a requirement where we created new output type and  changed  the driver program for the output assignment earlier this invoice was developed in script we changed it to a smartform. and assigned in NACE.
    Its working fine we r getting the printout also after getting the print out when I goto tcode VF02 a error log is being created
    when i click on the error log its showing
    Processing routine ENTRY in program ZINVOICE does not exist
    Zinvoice is the driver program.
    I hope to get inputs from you in resolving the issue.
    Hope to get the reply at the earliest
    Shivakumar K B
    9886920258

    This error message is quite tricky and misleading one.
    Make sure in your custom program, all the logic must be in a FORM-ENDFORM.
    form entry.
    Logic...
    endform.
    this form may have any name (not needed to be only ENTRY).
    The signification of the form is that this name will be given in the subroutine name in NACE transaction.
    the standard program RSNAST00 which triggers all the print program dynamically.
    it will fetch the name of the print program and form name from TNAPR table and calls the same.
    perform (TNAPR-RONAM) in (TNAPR-PROGNAME).
    At run time, the TNAPR-RONAM and progname will be filled with your z program name and the subroutine name.
    Rgds,
    SaiRam

  • Processing routine ENTRY in program zprog does not exist

    Hi experts,
    when i try to see print preview from ME23N it is showing status message like below....
    "Processing routine ENTRY in program prog does not exist"
    Message no. VN068
    Any help....
    Regards
    Ram

    As per my understanding, when you press print priview sap script is called by this.
    This sap script name and its driver routing in maintained in a database table .check t*
    As per the message this is missing.You need to update the processing routing in this table.
    Hope this helps you.

  • Model entry point 'test uuts' could not be executed error -18002

    Hi,
    I am running a testand(2.0.1f1) sequence of labview (7.0) steps and it is working perferctly in my computer , but when installing testand and labview in another computer and I try to run my sequence the next message appears. "model entry point 'test uuts' could not be executed error -18002"
    Is anyone that has an idea of what is happening here?
    Thanks =)
    Eren

    Hi Eren,
    You might try mass compiling the TestStand folders so that all VI's are at the same Version. TestStand 2.0.1f1 installs VI's that are at ver5.1.1
    When you run from the Entry Point eg "Test UUTs", before the sequence executions all VI's in all the sequence contained in the sequence file are loaded in to memory.
    Look at the error message again, it should be telling you which step in which sequence of the sequence file is not executable.
    Hope this helps
    Ray Farmer
    Regards
    Ray Farmer

  • Tried to add JUnit Test in Eclipse -- "Test type does not exist" error

    Hi guys,
    I'm developing an assignment whose details I won't bother going into -- it's enough to say that we were introduced to JUnit testing a couple of weeks ago in university tutorials, and I've stupidly tried to add one to my project without fully understanding it all. This is in eclipse 3.1.1.
    Basically, I followed eclipse's built-in tutorial called "Writing and running JUnit tests ".
    1) Created class "TestFailure" with method "testFailure".
    public void testFailure() throws Exception {
        fail();
    } 2) This then appeared as a .java file in my project (as well as on my UML diagram, courtesy of Omondo's UML plugin).
    3) I decided it was too risky mucking around with this stuff in a "live" project, so went ahead and deleted the TestFailure icon on my class diagram.
    4) I closed down eclipse.
    5) I went ahead and deleted TestFailure.java and TestFailure.class from my project folders.
    6) I opened my project again, and tried to execute...
    ... and now I keep getting a Test type does not exist error when I try and run it.
    How on earth do I get rid of this?
    Any advice/guidance is greatly appriciated -- oh, how I wish I'd not started messing with JUnit testing!!! :)

    Um, okay -- I fully hold my hands up and admit that I don't know what I'm doing with JUnit testing (we only had a half hour intro to it) but figured I may as well learn by using the official tutorials. It's always a good place to start! Although obviously using a current assignment isn't the best idea ;)
    I was executing my main class (obviously with my main method in there) to execute the program after I'd deleted test case classes, but strangely I've just shut down my machine and restarted and it's working fine. I'm not sure what the deal is here -- lesson learnt though, study new topics on a dummy project! :)
    Anyway, if I waited until I understood the software and code I'm producing to its fullest, I think hell'd freeze over before I executed any code! :) Using a tutorial to learn a new aspect of software I'm already familiar with wasn't a bad move, IMHO. Just using it on this particular project was... Needless stress and all that.

  • Batch does not exists for the material

    Dear Gurus
    In the inspection set up in qm view of material master  I have assigned early lot creation in control inspection lot field.I have created MICS and inspection plan also.After release of process order for that material the inspection lot for that order is created.When I am saving the inspection lot after entering in qa32 the system  is throwing a dialogue box ,"batch doesnot exist should a batch be created" with 3 buttons yes, no, cancel.Although the batch number is already present for the lot that I sawwhen I entered in,( batch number is coming through internal number range).Now after pressing yes in the dialogue box when I am going to msc2n to view the batch, the error message is coming the batch does not exist.
    What are the settings that I need to do so that this discrepency does not arise.
    Regards
    Sandip Sarkar

    sandip:
    1) DO you assign a batch number to the product during order creation ??
    2) Why do you have to enter with QA32 to save the inspection lot? This is saved once you release the order.

  • VL01N - Message VL200 -The batch does not exist in plant

    Hi all,
    I try to create a delivery for a sales order via VA03 by displaying the order, select Sales document and then Delivery from the menu bar. On the Dilvery overview screen, when I enter an invalid Batch number for the item, I receive a warming messge VL 200 (The batch does not exist in plant &) and I can save the delivery. My problem is I want to put a hard stop instead of a warning message so the delivery cannot be saved. Is there any solution for this or it is impossible to put a hard stop. I was thinking of config ... but I am not familiar with this. Please help!
    Thank you very much in advance,
    Chuong

    Hi Seshu,
    In include FV50PF0L, there is a logic to either display a Warning or Abend message, so i guess something can be set to do this. Please help, thansk!
          if v50agl-sammelgang = space and "46A BEY
          ( ( sy-dynnr ne gc_dyn_batchsplit and
              t185v-panel ne gc_panel_chsp ) or
            tvlk-vbtyp ca vbtyp_lire ) .
            perform message_handling in program (programmname)
                                               using cvbap-posnr
                                                     '200'
                                                     'W'
                                                     'VL'
                                                     lc_werks
                                                     space
                                                     space
                                                     space.
          elseif ( sy-dynnr eq gc_dyn_batchsplit or          "46A BEY
                   t185v-panel eq gc_panel_chsp ).
           if sy-binpt = charx.                                  "v_n_481983
               message id 'VL' type 'A' number '200' with lc_werks.
           else.                                                 "^_n_481983
            perform message_handling in program (programmname)
                                                  using cvbap-posnr
                                                        '200'
                                                        'E'
                                                        'VL'
                                                        lc_werks
                                                        space
                                                        space
                                                        space.
           endif.                                                  "n_481983

  • Batch does not exist for mvt typ 411 K

    Hi Experts,
    While i am perform migo for mvt type 411 K,it shows Batch does not exist but i check in MMBE,the batch for this vendor consignment was exist with stock.
    Any advice?
    Thank you.

    How did the batch go into your system? with an initial load program, or with a standard MIGO movement?

  • Batch does not exist for material

    Dear Gurus
    In the inspection set up in qm view of material master  I have assigned early lot creation in control inspection lot field.I have created MICS and inspection plan also.After release of process order for that material the inspection lot for that order is created.When I am saving the inspection lot after entering in qa32 the system  is throwing a dialogue box ,"batch doesnot exist should a batch be created" with 3 buttons yes, no, cancel.Although the batch number is already present for the lot that I sawwhen I entered in,( batch number is coming through internal number range).Now after pressing yes in the dialogue box when I am going to msc2n to view the batch, the error message is coming the batch does not exist.
    What are the settings that I need to do so that this discrepency does not arise.
    Regards
    Sandip Sarkar

    Was the batch number enterred in the process order?  If you have an inspection lot with early lot creation, you should have the batch number assigned in the order.  I suspect the system is having problems because of some conflict between the inspection lot, the process order and whatever internal batch number assignment process you might have.
    FF

  • Batch Does not exist

    Hi,
    After releasing process order in goods recpt tab batch number is generated but if double click on that batch number  msc3n screen is open and its gives me error. "Batch does not exist"

    Hello Sakshi,
    Batch will created only when the order is saved.So first save this order and check in Msc3n.
    Regards,

  • P16B Error : Entry pernr date VA does not exist in T5W/G

    Hi
    We are facing an error wherein we are not able to update the salary package details (FBP) using transaction P16B.
    It throws an error saying "Entry <pernr> <date> VA does not exist in T5W/G" before the screen loads.
    On debugging we found the error occurs in HR_SPA_VARIANT_GET function module where it checks for entry in the table T5W7G.
    The entry in the above table is not getting created even if update using P16B_ADMIN.
    The error is getting rectified if we manually create the entry in the table T5W7G and T5W7I for both VA and VB.
    I am unable to find a configuration node for creating the entries in the table's T5W7G and T5W7I .
    Please advice on how this error is to be rectified.

    Hi
    You have to either fix this in configuration through SPRO or If it is not solved through SPRO then you have search for an SAP note.
    Thanks & Regards
    Jyo

Maybe you are looking for