Entune not working after iOS upgrade

When we first got our Camry Hybrid with Entune, we could use Pandora with my iPhone 4. Now everything links up and appears to be OK, but the sound does not come through. My iPhone 4 is running iOS 6.0.1 (10A523). My son's iPhone 4 is running iOS 5.0.1 (9A405) and Pandora works fine with his phone hooked up.
How can I get my iPhone back to iOS 5.0.1 (9A405)?
Thanks!

Requirement to remedy
(1) A supplier may comply with a requirement to remedy a failure of any goods to comply with a guarantee—
(a) by—
(i) repairing the goods (in any case where the failure does not relate to title); or
(ii) curing any defect in title (in any case where the failure relates to title); or
(b) by replacing the goods with goods of identical type; or
(c) where  the supplier cannot reasonably be expected to repair the goods, by  providing a refund of any money paid or other consideration provided by  the consumer in respect of the goods.
(2) Where  a consumer obtains goods to replace defective goods pursuant to  subsection (1), the replacement goods shall, for the purposes of this  Act, be deemed to be supplied by the supplier and the guarantees and  obligations arising under this Act consequent upon a supply of goods to a  consumer shall apply to the replacement goods.
(3) A  refund referred to in subsection (1)(c) means a refund in cash of the  money paid or the value of any other consideration provided, or both, as  the case may require

Similar Messages

  • Zone Base Forewall for VPN connections does not work after IOS upgrade

    Hi all,
    We use cisco router 2911 as corporate gateway - there is Zone Based Firewall implemented - I upgraded IOS to last version (15.2(2)T1) - originaly version 15.1(4)M1 - to solve issue with Anyconnect connections (bug CSCtx38806) but I found that after upgrade the VPN users are not able to communicate with sources in other zones.
    More specific
    WebVPN use this virtual template interface
    interface Virtual-Template100
    description Template for SSLVPN
    ip unnumbered GigabitEthernet0/1.100
    zone-member security INSIDE
    There are other zones VOICE, LAB, ...
    In the policy any connection is allowed (used inspection of icmp, tcp and udp) from INSIDE zone to VOICE or LAB zone
    After VPN connection I am able to reach resources in INSIDE zone (which is the most important), but not in other zones. Before upgrade it worked.
    Once I changed zone in Virtual-Template interface to VOICE, I was able to reach sources in VOICE zone but not in any other. I searched more and found the stateful firewall is not working for connections from VPN as ping is blocked by policy on returning way - it means by policy VOICE->INSIDE, once I allowed communication from "destination" zone to INSIDE zone - the connections started to work, but of cause it is not something I want to setup.
    Does anybody has the same experiance?
    Regards
    Pavel

    It seems to me I should add one importatant note - if client is connected directly in INSIDE zone, he can reach resources in other zones without any issue - so the problem is only when the client is connected by VPN - not in ZBF policy setup.
    Pavel

  • IMessage not working after iOS 5.1 upgrade! Feedback pls

    iMessage not working after iOS 5.1 upgrade, anybody experiencing this as well? Feedback please......

    You shouldn't have to hard restart and it shouldn't have anything to do with your router.  If anyone else runs into this problem try resetting the network settings on your phone.  All the steps to do this can be found here http://tekshot5.com/ios-5-1-imessage-fix/
    Edit: Some of us don't have the option of resetting our DNS servers.  I run my own for example for caching purposes.

  • TS2621 why my outgoing mail server not working after ios 6 upgraded

    why my outgoing mail server not working after ios 6 upgraded

    Ask your carrier to send you the settings over wifi and then install them that way.
    I'm on giffgaff and I used the giffgaff app from the store to sort this out.
    Overall though I must say Apple has let itself down on this as why isn't something written in the ios script that keeps the original settings??
    Very Poor indeed and I held off using Apple products for years for this very reason!!

  • Iphone 5 back camara not working after ios update

    My Iphone 5 back camara is not working after ios 8.1 update this morning
    Only getting some fuzzy image.
    Camara was working before the update.
    Resting the phone to factory setting restoring phone nothing seems to work
    I think this will be my last Iphone as apple never respondse in any case

    If you're expecting Apple to respond on this forum, you will have a long wait. This is a user-to-user technical support forum that is only hosted by Apple. This was made clear when you signed up. In any case, try the steps in this article to troubleshoot hardware issues (there is a camera section):
    iPhone: Hardware troubleshooting

  • My outgoing mail is not working after the upgrade OS to mavericks. my mail client version is 7.1 . please help me resolve this issue

    My outgoing mail is not working after the upgrade OS to the mavericks. my mail client version is 7.1 . please help me out resolve this issue

    Please let me know , How we can reinstall apple mail ? .
    1 . We updated OS to mavericks few machine in last december and still does't works SMTP (Out going mail) on those MAC.
    2.  After that most recently we updated OS to mavericks few machine those are working will with SMTP server .
             a)Not showing any SMTP connection in TCP trace ,
             b) Connection docter every time Says "Connecting to the server "
    3, Then we have installed thunderberd (another mail) client on maverick os, which OS related to apple mail client not woking . It seems other mail client is working well with SMTP server .
    Please help me .
    Thanks,
    Ranesh..

  • Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password is now not working after the upgrade to 10.5.

    Object is to sync address and calendar between laptop with Max OS 10.4.11 and iPhone. Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password for the laptop is now not working after the upgrade to 10.5., though it was working prior to the upgrade, for file sharing.

    @ BDAqua > I tried your suggestion but no luck. holding opt+command just gave me a blue screen and it rebotted, pushing the disk out of the drive. Yes, the macbook has 1 gb of ram. I realize that the min req. call for 2 gb of ram so i've got an order in for another dimm to put into the machine. Thanks for your suggestions.
    @ a_brody > Yes. The machine was plugged into a power source. The disk promts you to do that and i recall aspect this form other installs. Thanks for the reminder tho! ( btw your second post is like greek to me man!) 
    @ Kuncklesmac > You're right about Snow Leopard being an upgrade from Leopard. I'm aware of this. And yes previously i've been told by Apple that I needed the Box Set (not the family pack.  i am using the family pack for OS Snow Leopard) to upgrade my 10.4.11 mac - they never mentioned adding ram but i figured that out on my own and an apple specialist recommended it when i purchased Snow Leopard and confirmed that I coul duse the Snow Leopard to upgarde from Tiger (10.4.11). I've also read extensively (as i said above) that it isn't necessary (always) to buy the box set. Several 10.4.11 users report having upgraded using the Snow Leopard upgrade disk only (not the Box Set) without trouble on intel macs (also see the apple link i posted). So i'm just ondering how they did it and i cannot. 
    Thanks fo rall yor help!

  • The MSS ECM FPM Steps are not working after the upgrade

    Hi all,
    The MSS ECM FPM Steps are not working after the upgrade. We use Java Webdynpro and MSS ECM (SP17), version 603.
    On cliking the FPM steps, nothing is happening, however we can navigate using the buttons.
    But this functionality was working before the upgrade.
    Please let me know what should I do.
    Thanks,
    Sarayoodharan.K

    clinet provided in the backend system was not correct during SSO certificate using tx-code strustsso2 -  Cleint should be 000

  • When apple will fix the problem of the Bluetooth. It is not working after the upgrade to7.03

    when apple will fix the problem of the Bluetooth. It is not working after the upgrade to7.03

    there is no problem with B/T and iOS7.0.3 in my case used on iPhone 5 and 4 in several environments including in car
    Do a reset
    restore with back up and if required as new

  • TX2500Z touchscreen does not work after Windows7 upgrade from HP specific to S/N, etc on laptop.

    My TX2500Z touchscreen does not work after I upgraded to Windows 7. I cannot find any support or drivers, etc. to fix.  I bought Windows 7 directly from HP specific to my P/N and S/N on my TX2500Z.  Any help? Thanks.

    after 2,5 days (spending half a day within the apple shop as well with this problem) i have it all back on track.
    i did a lot of different things: trying to remove and reinstall iPhoto; did a SL installation over the old SL I had on my HD; backing up all the data of course before and reformatting my HD and installing a new clean SL version on it + a new clean version of iLife9 with all the updates and than I migrate with migrate assistant all the data and setting with time machine back onto it, but all this didn't work, because it also migrated the error/bug through time machine with it.
    so at the end i just installed a brand new, clean SL version on my hard drive, than I did the updates and put all my data, photos, docs, movies, mail, bookmarks, music, etc manual back into the system (drag and drop from my external HD, where i had an exact copy of my internal HD) and did all the settings again in all the different programs.
    the only thing i used migrant assistant with time machine for was for the programs. it seems to work now all fine and i even got more free space on my HD, because some of the old stuff i always carried with me but i never used, i didn't take over.
    basically everything is clean now. At least i hope and works fine. touch wood!

  • Why is Time machine backup not working after Mavericks upgrade?

    Why is Time machine backup not working after Mavericks upgrade?

    I had the same problem due to the Fire Wire port.  Apple tested it told me it is OK!, I tried a new cable, and have tested both ports on my back up device.  I find it strange that as soon as I installed Mavericks.  The drive does work using USB.  It could be a coincidence, I don't absolutely know at this point, my back up drive ports could stop working, but I doubt it!

  • Re: Safari 7.0 zoom not working after Mavericks upgrade.

    Re: Safari 7.0 zoom not working after Mavericks upgrade.

    Hey there sarunelis,
    It sounds like after updating to 10.9 the zoom function is not functioning at all. It sounds like you may need to check for 3rd party plugins. This article will help you check for that.
    Safari: Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues
    http://support.apple.com/kb/ts3230
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • Left mouse button does not work after last upgrade on one computer.

    Second request -- left mouse button no longer works after latest upgrade. Uninstalled and reinstalled - did not help. Only affected my office computer. Left button works on other three search engines and other programs -- need suggestions...

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Forms Personalization not working after R12 upgrade

    Hi,
    We have recently upgraded to R12. We have forms personalizations on the People, Enter and Maintain form and this is not working now after the R12 upgrade.
    I went to one of the form personalizations and Validated and Applied again but it still did not work. I also created a new one but had no success with that either.
    Any ideas how to get this working again ? Is there something extra that needs to be done for R12?
    Thanks
    Regards,
    Shalantha

    Pl indicate which version of R12 and on what form you had the personalization in the previous version. Have you checked FND_FORM_CUSTOM_% tables to ensure that the personalization survived the upgrade ?
    Pl see if these MOS Docs can help
    Forms Personalizations Unavailable After Upgrade To 12.1.x          (Doc ID 1245864.1)
    Forms Personalization Not Working After Upgrade To R12.1.3          (Doc ID 1309458.1)
    Form Personalization Value Field Not Being Retained After Upgrade          (Doc ID 1266265.1)
    Do Personalizations Holdup After A Patch Is Applied? (Doc ID 1286576.1)
    HTH
    Srini

  • Touch ID not working after IOS 7.1 update

    Touch ID will not work after the recent update, rebooted iphone to no avail. I then deleted all finger prints, but iphone will not recognise new fingerprints ..... Annoyed is not the word ! Any ideas ?

    I'm like, Touch ID almost dead, we're going apple fixex this.
    Seems it only is affecting the white model

Maybe you are looking for