Enumeration conflict when wiring a bundle output to a subvi
Hello, I am trying to wire a cluster to a subvi, and I keep getting an enumeration error. The same number of components is expected. The only thing I can think of is that it wants the cluster to be bundled by name, but I can't do that either.
It could be the order of components of the clusters in the called and callee vi's is different.
In the called subVi, right click on the cluster and select
reoder controls in cluster, and note the order.
Then , when you wire the bundled data cluster to the subVi, follow the same order, or else some data will not match
Similar Messages
-
Hi Experts,
When I run my Application in Portal, i am getting the following error.
Type conflict when calling a function module., error key: RFC_ERROR_SYSTEM_FAILURE
When I execute the BAPI, it is getting executed.
My Bapi Strucute:
Import Parameters
IM_MAT_Search --> ZPTIP_MAT --> Import Parameters
Tables
IT_INFO_REC --> ZMM_GET_ITEM --> Output Parameters
When I import the model, i am getting the structure like this
BAPI_Name > ZMM_BAPI_Input> IM_MAT_Search(respective Parameters) , Output (respective Tables and their parameters)
> ZMM_Input1> Parameters
This is the way, how i am executing in webdynpro java
Zmm_Bapi_Ptip_Search_Input eleInput = new Zmm_Bapi_Ptip_Search_Input();
wdContext.nodeZmm_Bapi_Ptip_Search_Input().bind(eleInput);
Zptip_Asset eleInputAsset = new Zptip_Asset();
eleInputAsset.setSearch("ACRS");
wdContext.nodeZptip_Asset().bind(eleInputAsset);
eleInput.setIm_Ast_Search(eleInputAsset);
wdContext.nodeZmm_Bapi_Ptip_Search_Input().bind(eleInput);
wdContext.nodeZmm_Bapi_Ptip_Search_Input().currentZmm_Bapi_Ptip_Search_InputElement().modelObject().execute();
wdContext.nodeOutput().invalidate();
Please let me know, how to do the same.
Thanks in advance.
Regards,
PalaniHi David,
I checked for the Parameter of setIm_Ast_Search, it is of Zptip_Asset.
Hi Saleem,
When I changed the same, i am getting the Type conflict error,
Type conflict when calling a function module., error key: RFC_ERROR_SYSTEM_FAILURE
Please let me know,what can be done in this regard to solve the problem.
My BAPI Structure when imported as model
SearchBAPI
--> ZMM_BAPI_SEARCH_INPUT
> IM_AST_SEARCH(zPTIP_ASSET)
>Zptip_Asset
>Search (Parameter)
> OutPut(ZMM_BAPI_Search_Output)
>IT_Asser_Rec(ZMM_Asset)
>ZMM_Asset
>TXT100 (output Parameter)
--> ZMM_BAPI_SEARACH_OUTPUT
--> ZPTIP_ASSET
>Search (Parameter)
Thanks & Regards,
Palani
Edited by: Palani Appan on Nov 11, 2009 5:31 PM -
Class conflict when programmatically editing graphs with property node
I am trying to programmatically move the cursors on a graph. I want the cursor to look the same on 2 different graphs so I made a subVI. The code works correctly when I have seperate property nodes, but when I try to use the subVI, I get a class conflict -
"You have connected a refnum of one type to a refnum of another type and both types are members of some class hierarchy, but there is neither a simple up cast nor type cast between the two classes."
I am not sure how to fix this. The graph that works is of a waveform, and the graph that doesn't is the output of the FFT Power Spectrum VI. Is the problem that the inputs are different? Or is there some kind of resource conflict when using property nodes in subVIs?A shot in the dark here. But maybe if you make the subVI's input reference of type GraphChart it would work.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines -
I am getting an enumeration conflict with the averaging type input of the fractional octave analysis VI.
"You have two or more enumeration data types wired together, but the enumerations are different. The list of items in the enumerations must be exactly the same."
The problem is that I only want to give the user 2 options - exp or linear, I don't want option 2 or 3, just 0 or 1. Howe can I force this VI to accept my input?There is an option of programmatically disable items on front panel control (attached)
Sergey
Attachments:
disable enum's.vi 25 KB -
Type conflict when calling a function module (field length)
Dear All,
I am getting this following error while executing: Type conflict when calling a function module (field length)
This is piece of coding i have writern in my action button.
method SEARCH_MATERIAL .
data:
node_mat_input TYPE REF TO if_wd_context_node,
node_mat_output TYPE REF TO if_wd_context_node,
material TYPE BAPIMATDET-MATERIAL,
itab TYPE TABLE OF BAPIMATDOA.
node_mat_input = wd_context->get_child_node( 'NODE_MAT_INPUT' ).
node_mat_output = wd_context->get_child_node( 'NODE_MAT_OUTPUT' ).
node_mat_input->get_attribute( EXPORTING name = 'MATERIAL'
IMPORTING value = material ).
CALL FUNCTION 'BAPI_MATERIAL_GET_DETAIL'
EXPORTING
material = material
PLANT = plant
VALUATIONAREA =
VALUATIONTYPE =
MATERIAL_EVG =
IMPORTING
MATERIAL_GENERAL_DATA = itab
RETURN =
MATERIALPLANTDATA =
MATERIALVALUATIONDATA =
node_mat_output->bind_table( itab ).
endmethod.
Attributes are:
Node name = INPUT its structure is BAPIMATDET
INPUT attributes = MATERIAL of type BAPIMATDET-MATERIAL
Thanks,
Gopi.Hi Amit,
I have used service call to fetch records from that bapi..
The following is the code generated by service call:-
METHOD execute_bapi_material_get_deta .
declarations for context navigation
DATA:
node_bapi_material_get_de TYPE REF TO if_wd_context_node,
node_exporting TYPE REF TO if_wd_context_node,
node_material_general_dat TYPE REF TO if_wd_context_node,
node_importing TYPE REF TO if_wd_context_node,
lri_element TYPE REF TO if_wd_context_element.
declarations for fuba parameters
data:
stru_c_material_general_dat TYPE if_componentcontroller=>element_material_general_dat.
DATA:
attr_material TYPE bapimatdet-material,
attr_plant TYPE bapimatall-plant.
get all involved child nodes
node_bapi_material_get_de = wd_context->get_child_node( `BAPI_MATERIAL_GET_DE` ).
node_exporting = node_bapi_material_get_de->get_child_node( `EXPORTING` ).
node_material_general_dat = node_exporting->get_child_node( `MATERIAL_GENERAL_DAT` ).
node_importing = node_bapi_material_get_de->get_child_node( `IMPORTING` ).
get input from context
node_importing->get_attribute( EXPORTING name = `MATERIAL`
IMPORTING value = attr_material ).
node_importing->get_attribute( EXPORTING name = `PLANT`
IMPORTING value = attr_plant ).
the invocation - errors are always fatal !!!
CALL FUNCTION 'BAPI_MATERIAL_GET_DETAIL'
EXPORTING
material = attr_material
plant = attr_plant
" valuationarea = wd_This->Valuationarea
" valuationtype = wd_This->Valuationtype
" material_Evg = wd_This->Material_Evg
IMPORTING
material_general_data = stru_c_material_general_dat
" return = wd_This->Return
" materialplantdata = wd_This->Materialplantdata
" materialvaluationdata = wd_This->Materialvaluationdat
node_material_general_dat->bind_structure( stru_c_material_general_dat[] ).
ENDMETHOD.
but the problem is I am getting the following error while compiling...
" stru_c_materialplantdata " is not an internal table - the " OCCOURS n" specification is missing.
Thanks,
Gopi.
Edited by: Yegalaivan on Nov 18, 2009 8:30 AM -
ERROR: -Type conflict when calling a function module
hi to all,
when iam executing the program in browser Type conflict when calling a function module error is showing, i have bind all the attribute correctly still iam getting error, WHEN I CLICK ON THE SEARCH BUTTON DATA IS NOT COMING TO MY TABLE ITAB1 plz help me....
DATA:
NODE_IP_SELECTION TYPE REF TO IF_WD_CONTEXT_NODE,
ELEM_IP_SELECTION TYPE REF TO IF_WD_CONTEXT_ELEMENT,
STRU_IP_SELECTION TYPE IF_PLANNING_HISTORY=>ELEMENT_IP_SELECTION ,
ITAB TYPE TABLE OF ZSL_PL_UPDATE1,
WA TYPE ZSL_PL_UPDATE1.
navigate from <CONTEXT> to <IP_SELECTION> via lead selection
NODE_IP_SELECTION = WD_CONTEXT->GET_CHILD_NODE( NAME = `IP_SELECTION` ).
get element via lead selection
ELEM_IP_SELECTION = NODE_IP_SELECTION->GET_ELEMENT( ).
get all declared attributes
ELEM_IP_SELECTION->GET_STATIC_ATTRIBUTES(
IMPORTING
STATIC_ATTRIBUTES = STRU_IP_SELECTION ).
CALL FUNCTION 'ZBAPI_PL_UPDATE'
EXPORTING
GV_LIFNR = STRU_IP_SELECTION-LIFNR
GV_MATNR = STRU_IP_SELECTION-LIFNR
GV_GJAHR = ' '
GV_WEEK_LOW = STRU_IP_SELECTION-FROM_WEEK
GV_WEEK_HIGH = STRU_IP_SELECTION-TO_WEEK
IMPORTING
RETURN =
TABLES
GT_PL_UPDATE = ITAB
DATA:
NODE_PLANN_NODE TYPE REF TO IF_WD_CONTEXT_NODE,
ELEM_PLANN_NODE TYPE REF TO IF_WD_CONTEXT_ELEMENT,
STRU_PLANN_NODE TYPE IF_PLANNING_HISTORY=>ELEMENT_PLANN_NODE,
WA1 TYPE IF_PLANNING_HISTORY=>ELEMENT_PLANN_NODE,
ITAB1 TYPE TABLE OF IF_PLANNING_HISTORY=>ELEMENT_PLANN_NODE.
LOOP AT ITAB INTO WA.
MOVE-CORRESPONDING WA TO WA1.
APPEND WA1 TO ITAB1.
ENDLOOP.
navigate from <CONTEXT> to <PLANN_NODE> via lead selection
NODE_PLANN_NODE = WD_CONTEXT->GET_CHILD_NODE( NAME = `PLANN_NODE` ).
CALL METHOD NODE_PLANN_NODE->BIND_TABLE
EXPORTING
NEW_ITEMS = ITAB1
SET_INITIAL_ELEMENTS = ABAP_TRUE
INDEX =
ENDMETHOD.CALL FUNCTION 'ZBAPI_PL_UPDATE'
EXPORTING
GV_LIFNR = STRU_IP_SELECTION-LIFNR
GV_MATNR = STRU_IP_SELECTION-LIFNR
GV_GJAHR = ' '
GV_WEEK_LOW = STRU_IP_SELECTION-FROM_WEEK
GV_WEEK_HIGH = STRU_IP_SELECTION-TO_WEEK
IMPORTING
RETURN =
TABLES
GT_PL_UPDATE = ITAB
Problem is here
check out the type GV_GJAHR whether it accepts string type.
thanks
sarbjeet singh -
Error message when trying to issue output for printing in the VT02N
We have one issue where user is trying to givng print out for shipiing details in the tranaction VT02 n
in EXTRAS---> output , there are giving the out put type ZS04 and when they save the output type they are getting the following error messages
Mandatory: Proforma saknas
Mandatory: (5.Varuposter) - Commodity code saknas i delivery:
output type is configured in nace transacition with the print program and the forn name
Please tell me why this error is coming
thanks in advance
pavanHi,
Check if you have entered values in all the mandatory fields required.
If you have try debugging and check where error is coming.
Just type /H in the command bar and click enter when you clcik on goto-extra it will got to debugging.
In that put breakpoint at message.This will put break points at all message statements.
Then you can find out very fast where the error is coming from
Regards,
Subhashini -
Error Dynamic type conflict when assigning references in EHP4
Hi Experts,
We are facing problem while customizing application wizard in EHP4.
Based on our requirement, we need to create one more tab named "Notes" to add instructions for applicants while applying for Job. It contains only instruction. To achieve this, we have done below set up.
1. We have created new WD component (WD window), OTR Alias
2. Created one more additional steps in T77RCF_RM_STEP called "Notes" and maintained step 1 information
3. In table T77RCF_RM_SEQ, under Application wizard (employee), we have added notes in sequence 1.
Now our new tab "Notes" is reflecting in application wizard. But while cliking on send application, we are getting error "The following error text was processed in the system GEG : Dynamic type conflict when assigning references".
Error Details:-
u2022 The following error text was processed in the system GEG : Dynamic type conflict when assigning references
u2022 The error occurred on the application server sapgeg_GEG_59 and in the work process 0 .
u2022 The termination type was: RABAX_STATE
u2022 The ABAP call stack was:
Can anybody guide what we are doing wrong?
It would be great help.
Regards,
purnimaHi Rajasekhar,
Facing the same issue, can you please let me know how you solved the above issue.
Best Regards,
Laxman -
Made a slideshow using Photoshop Elements 9 that keeps crashing when I try to output it to movie file (wmv).
This message appear: Microsoft Visual C++ Runtime Error
This is totally new to me as I have made a few slidshows before and saved them into wmv-files without any problem.I tried to open the file and renew it "save as" and did the whole procedure over again but it still crasches. There is no video in the slideshow and all pics are .jpg and to summarize it - 5 days of work is nearly gone if this doesent convert into a wmv-file..... Pls advise any suggestion what to try here.
Best regards
Eric
/SwedenYour crash has nothing to do with the junk filter. It looks more like a corrupt preferences file. If you're curious, you may check the validity of that file issuing the following command in Terminal:
plutil ~/Library/Preferences/com.apple.mail.plistWhat does it say? Now, try this:
1. Quit Mail.
2. Make a backup copy of the HOME/Library/Mail folder, just in case something goes wrong. You can do this in the Finder by dragging the folder to the Desktop while holding the Option (Alt) key down, for example. This is where all your mail is stored.
3. In the Finder, go to HOME/Library/Preferences/. Locate the file com.apple.mail.plist and move it to the Desktop (to be deleted if this fixes the problem).
You'll have to set up your accounts from scratch all over again. If given the option to import existing mailboxes or something like that, don't. Just enter the account information and Mail will automagically rediscover the data in HOME/Library/Mail/ when done.
You'll also have to re-configure most of your settings in Mail > Preferences. The first thing you should do is go to Preferences > Viewing and disable "Display remote images in HTML messages" if it's enabled. -
i am trying to generate purchase order and i create a BAPI also which is active.
But when i call the BAPI from SYbase Mobile Object RFC then after calling it gives an Error "Conflict when calling a Function Module (Field Length)".Hi,
Yeah i tried my Z_BAPI in R3 and then giving some ERROR.
This is my CODE-
FUNCTION ZBAPIPOTV2.
*"*"Local Interface:
*" IMPORTING
*" VALUE(POHD) TYPE ZPOHD OPTIONAL
*" VALUE(POITEM) TYPE ZPOITEM OPTIONAL
*" TABLES
*" RETURN STRUCTURE BAPIRET1 OPTIONAL
data: ls_pohd type bapimepoheader,
ls_pohdx TYPE bapimepoheaderx,
lt_poit TYPE TABLE OF bapimepoitem,
lt_poitx TYPE TABLE OF bapimepoitemx,
ls_poit TYPE bapimepoitem,
ls_poitx TYPE bapimepoitemx.
MOVE-CORRESPONDING pohd to ls_pohd.
MOVE-CORRESPONDING poitem to ls_poit.
ls_pohdx-comp_code = 'x'.
ls_pohdx-doc_type = 'x'.
ls_pohdx-vendor = 'x'.
ls_pohdx-purch_org = 'x'.
ls_pohdx-pur_group = 'x'.
ls_poit-po_item = '00010'.
APPEND ls_poit to lt_poit.
ls_poitx-po_item = '00010'.
ls_poitx-po_itemx = 'x'.
ls_poitx-material = 'x'.
ls_poitx-plant = 'x'.
ls_poitx-quantity = 'x'.
APPEND ls_poitx to lt_poitx.
CALL FUNCTION 'BAPI_PO_CREATE1'
EXPORTING
POHEADER = ls_pohd
POHEADERX = ls_pohdx
* POADDRVENDOR =
* TESTRUN =
* MEMORY_UNCOMPLETE =
* MEMORY_COMPLETE =
* POEXPIMPHEADER =
* POEXPIMPHEADERX =
* VERSIONS =
* NO_MESSAGING =
* NO_MESSAGE_REQ =
* NO_AUTHORITY =
* NO_PRICE_FROM_PO =
* PARK_COMPLETE =
* PARK_UNCOMPLETE =
* IMPORTING
* EXPPURCHASEORDER =
* EXPHEADER =
* EXPPOEXPIMPHEADER =
TABLES
RETURN = return
POITEM = lt_poit
POITEMX = lt_poitx
* POADDRDELIVERY =
* POSCHEDULE =
* POSCHEDULEX =
* POACCOUNT =
* POACCOUNTPROFITSEGMENT =
* POACCOUNTX =
* POCONDHEADER =
* POCONDHEADERX =
* POCOND =
* POCONDX =
* POLIMITS =
* POCONTRACTLIMITS =
* POSERVICES =
* POSRVACCESSVALUES =
* POSERVICESTEXT =
* EXTENSIONIN =
* EXTENSIONOUT =
* POEXPIMPITEM =
* POEXPIMPITEMX =
* POTEXTHEADER =
* POTEXTITEM =
* ALLVERSIONS =
* POPARTNER =
* POCOMPONENTS =
* POCOMPONENTSX =
* POSHIPPING =
* POSHIPPINGX =
* POSHIPPINGEXP =
* SERIALNUMBER =
* SERIALNUMBERX =
* INVPLANHEADER =
* INVPLANHEADERX =
* INVPLANITEM =
* INVPLANITEMX =
ENDFUNCTION.
i am trying to generate purchase order and i create a BAPI also which is active. But when i call the BAPI from SYbase Mobile Object RFC then after calling it gives an Error "Conflict when calling a Function Module (Field Length)". -
Console not seeing Media Centre when wired through...
I have an issue that is causing no end of problems. My current wired network and wifi SSIDs
BT Home Hub 2----- DHCP - Wifi 802.11g only {SSID}OLD
| |
| Sky HD Box (Wired)
| XBOX360_1 (Wired)
|
TP-Link WR1043N router --- Wifi 802.11n {SSID}N
| |
WinXP1 WinXP2
Connected to {SSID}OLD I have:
2 PS3 consoles
XBOX360_2
WinXP3 (laptop)
WinXP4 (desktop)
Connected to {SSID}N I have:
XBOX360_3
3 tables
4 android phones
Win7_1
All hardware can connect to the internet without problems and anything connect to both {SSID}N and {SSID}OLD or wired running through the WR1043N router can communicate without issue.
WinXP1 hosts a a number of services (Web, POP, FPT) which communicate out to the internet as well as all internal devices and also hosts a Tversity Media Server. It also acts as a print server for the house with all devices taking advantage of the network printing, both Win and LRP, once again without issue.
Thanks to WMP11, WinXP1 also hosts a secondary media player and the WR1043N router also hosts a media player. All devices on both and either wireless network can see all 3 media players and play video and media flawlessly.
However I am having a problem with the 1 piece of hardware that is wired into the Home Hub itself. The device named XBOX360_1 can communicate fine on the internet (XboxLive, Lovefilm, IE) but it cannot reliably see any of the 3 media servers running on the network. Sometimes it sees nothing, then it sees them all but cannot connect, then it sees 1, lists the media available but will not play anything.
I have tried all 3 XBOX360 consoles in that port and non of them can see the media servers when wired into the Home Hub, yet all 3 can see it when wireless. I have not tried wiring the consoles into the WR1043N router but as the WinXP2 can see everything on WinXP1 fine, I am happy it is nothing to do with the TP-Link kit.
Also as anything connecting through {SSID}OLD has to pass through a wired network through WR1043N, I can say it is not a comms issue between WR1043N and HH2.
I am only left with the possiblity that something on the HH2 is blocking traffic between 2 wired ports or is introducing an increased amount of network lag, worse than over wifi. I have tried a combination of all 4 ports on the HH2 and tried 3 different network cables between HH2 and the console and nothing seems to work.
Is there any experience of there been communication issues between the ports on HH2 previously, or is there anyone out there with any more ideas because I am all out of them.
Thanks
I am guided by a force much greater than luck.ps3 Wired to HH - dlna protocol error 7531 - Appears to be a generic comms failure.
Win7 Wired to HH - intermittant, slow, not Ideal
** Decided rather than moving my consoles about I would swap out the routers first **
Swap out the WR1043N entirely for a switch - same results as previous test when running through HH. No/intermittant connection to DLNA/Media servers slow/intermittant connection over HTTP, port 8080 etc
Now the good news
Swap out the HH2 entirely for a switch - flawless performance across all connections and protocols. HH2 spurred off the switch so still had internet enabled and HH still acted as DNS, the only difference is the XBOX is not passing through the HH to talk to media server.
It appears there is some interferance being introduced between the ethernet ports on the HH2 so time to replace it. The Win7 laptop is able to compensate for this to some expent but the consoles cannot.
I unplugged the Sky box which also plugs into the HH and it does seem to at least transmit the Media Server library, but as soon as streaming starts, it cuts off again.
I only see 3 solutions
1. Ask BT for a new HH, unlikely due to its age
2. move to another provider and get a new modem/router free
3. buy another modem and move the WR1043N, great more money and not what I bought the WR1043N
Personally I am thinking option 2 is the least hassle and most cost effective. Thanks for the bounce off anyway.
I am guided by a force much greater than luck. -
TRFC type conflict when calling the function module
Hi,
When I schedule, it is stucking up with TRFC and giving error message in SM58 as" TRFC type conflict when calling the function module" .
even if I execute the trfc LUWs ,load is not successful.
could you please any body suggest for this error.
Thanks
RHi Guys,
could any suggest why this is happening.
TRFC is stuck up and giving error message.
Thanks
Ram -
DTP error: Type conflict when calling FM - after transport to Prd
Hi ,
i have asset_attr datasource.it was working in my BW dev.
however after transport to BW prod. when i try to upload data using DTP it gives me an Abrupt error
"0ASSET_ATTR IPDCLNT030 : Type conflict when calling a function module (fiel
Message no. RSDS666"
no more information is given, & the request ends in red.
This is first time i'm using this Infoobject upload.
however all my other transaction data & other master data all are getting uploaded fine.
even Asset_text datasource is working fine.
Did anyone face similiar probs ?
can anyone guide me on this error ?
thanks
rameshHi
Take a look at note 1130907.
Regards,
Chandu. -
ERM "Unhandled error; type conflict" when clicking Maintain in PFCG button.
I am testing my installation of GRC and when creating a role in ERM with the role designer I click the "Maintain in PFCG" and am receiving an error:
Unhandled error; Type conflict when calling a function module (field length).
I have been doing some searching but have been unable to find a solution for this. I have implemented the items found in SAP Note 1291501 regarding security.
Does anyone have suggestions on what the solution of this problem is or what I can do to troubleshoot this issue more?Hi Michael,
Can you please share your other details like: What is the GRC AC version you are trying to test and the patch level of ERM and RAR. Try to check the System logs in the Configuration section. Check st22 suggested by Julius and also sm21 in the backend system for system logs . I hope you'll get some hint out of that.
Regards,
Gurugobinda -
Dump while testing Function- Dynamic type conflict when assigning reference
Hi Gurus,
I have the following checked and activated-
- Function with 1 Ruleset
- The Ruleset containing couple of DBlookup expressions
- Value range
- Decision Table
- Decision tree,
- Procedure call
After I give test data while Simulating the function, I get this dump-
Short text
Dynamic type conflict when assigning references
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_FDT_DB_LOOKUP==============CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
Have I missed something? We are on SAPKA70207.Hi Carsten,
I couldn't find an OSS note featuring-
"MOVE_CAST_ERROR" "CX_SY_MOVE_CAST_ERROR"
"CL_FDT_DB_LOOKUP==============CP" or "CL_FDT_DB_LOOKUP==============CM01K"
"BUILD_WHERE_CLAUSE_LIMIT"
Raised OSS note.
Maybe you are looking for
-
Error while creating data set in bi publisher using web service
This page contains the following errors: error on line 3 at column 1: Extra content at the end of the document Below is a rendering of the page up to the first error. data engine log: <?xml version="1.0" encoding="UTF-8" ?> - <debugLog> - <msg time="
-
XML publisher report using connected query
dear all, I defined some XMLP reports with very similiar parameters. I found a strange issue, all reports using query as the source, they appear in the XMLP report viewer. But for those using the connected query, all are not able to be found in the X
-
Verizon Edge, to good to be true, or an outright lie?
I recently (May 15th, 2014) went into a GoVerizon store to upgrade two of our phones on our family plan. We have 5 lines connected and we have been on the 1400 family shared minutes with text $10 extra per phone. We were due for upgrades (actually so
-
Photoshop doesn't open after install.
I've installed trial version of PS latest version and when I try to open it gives me error message. Please help. Regards
-
One of my documents on textedit suddenly converted to plain text and i can't get it back. Help. Spent over 5 months working on it. Had tables etc. Can i get it back?