Env Variable setting for Oracle 11g windows 2003 R2

Hi ,
While installing the Oracle 11g on windows 2003 R2 getting error while running the prerequsite steps for installtion.failing the env variables path. Please guide us to set up the Environmental variable for the oracle 11g installation.
Thanks..

Tippu wrote:
Hi,
Oracle version Oracle 11.2.0.1
Os Windows 2003 R2
we had set some values. though we are getting the below errors.
Environment variable: "PATH" - This test checks whether the length of the environment variable "PATH" does not exceed the recommended length.
Expected Value
: 1023
Actual Value
: 0
List of errors:
PRVF-3916 : Environment variable name "PATH" is not set on node "laxwzcl01" - Cause: Environment variable value could not be determined. - Action: Ensure that the environment variable is set and access permissions for the Oracle user allow access to read the environment variables. Restart the installer after correcting the setting for environment variable.It's like setting any other environment variable in Windows ...
Right click My Computer, select Properties > Advanced tab > Environment variables button ...
It should be self-evident from that point.

Similar Messages

Database Recovery Oracle 11g Windows 2003

started up the database but get ora -01589
when alter database open resetlogs get ora 01110
Please assist
Thanx.

NPD wrote:
I'm not sure what could have gone wrong but it's complaining about unaccessible datafiles. On the OS it shows that there's data but on EM it looks empty.How about giving us actual commands and error messages? We can't look over your shoulder and see what you are doing and how the OS or oracle responds. We don't know what you mean when you say "OS it shows that there's data".

Oracle 11g Windows 2003 (SQL Respose Time)

Hi Guys,
My SQL Response Time is more ttan 100% and keeps on increasing. How can I fix this? The Application users are complaining that the system is very slow.
Thank you.

I cannot start/ stop dbconsoleHow do you do this? Control panel? Command line?
Post the output of
emctl start dbconsole
Werner

Oracle 11g Windows 2003

Hi Guys,
I cannot start/ stop dbconsole. A service specific error 2 occurs.
Pls assist
Thanx.

I cannot start/ stop dbconsoleHow do you do this? Control panel? Command line?
Post the output of
emctl start dbconsole
Werner

Backup db using expdb/impdb (Oracle 11g Windows 2003)

Hi Guys,
I'm currently doing backups using expdb/impdb due to problems we have with BackupExec when I use RMAN. But what I want to find out is that would you call expdb/impdb a hot or a cold backup? Or should I say what happens when the user is trying to access the database while expdb/impdb is in progress?
Thank you.

expdp is not consider any form of backup. It's just an alternate way to export the data into dump files and import when required. You can not do any sort of recovery with expdp dumps.
depends on number of CPU's you have and number of parallel threads you are using, users may experience spikes in the busy database.
Regards,
-Vijay

Optimal NTFS block size for Oracle 11G on Windows 2008 R2 (OLTP)

Hi All,
We are currently setting up an Oracle 11G instance on a Windows 2008 R2 server and were looking to see if there was an optimal NTFS block size. I've read the following: http://docs.oracle.com/cd/E11882_01/win.112/e10845/specs.htm
But it only mentioned the block sizes that can be used (2k - 16k). And basically what i got out of it, was the different block szes affect the max # of database files possible for each database.
Is there an optimal NTFS block size for Oracle 11G OLTP system on Windows?
Thanks in advance

Is there an optimal NTFS block size for Oracle 11G OLTP system on Windows?ideally FS block size should be equal to Oracle tablespace block size.
or at least be N times less than Oracle block size.
For example - if Oracle BS=8K then NTFS BS better to be 8K but also can be 4K or 2K.
Also both must be 1 to N times of Disk sector size. Older disks had sectors 512 bytes.
Contemporary HDDs have internal sector size 4K. Usually.

Oracle with Windows 2003 server

Hi all,
I am using oracle 10g /windows 2003 Server with latest patches, the problem is whenever i restart the server instance does not start automatically , i have to start the instance manually.
how could i troubleshoot the problem , oracle not generating any error log for this, there is no information in alertlog.
when i chek the db service in services.msc it said , service started and automatic.
Thanks in advance
Salai Thenagan Jayavelu

go to services window and set all your Oracle services to automatic instead of manual. this will start your database automatically rather you start it manually
Anil Malkai

Current Patch Set for Oracle Database Release 11.2

Hi
I am upgrading oracle 10G to 11GR2 in AIX 5.3 Environment with SAP ECC6 , I have just just installled Oracle 11.2.0.1.0 according to the "Database Upgrade Guide -Upgrade to Oracle Database 11g Release 2 (11.2): UNIX". After database software installation , in upgrade manual in section 3.4.4 it says, you need to install current patch set for oracle database 11g R2 and referencing a SAP note 1431799.
I have just read note 1431799 which says Current Patch Set for Oracle Database Release 11.2 is not generally available for SAP customers until December 2010, also I donu2019t find the note 1522330 as mentioned in 1431799.
Please let me know how I can get current patch set to apply with Oracle 11.2.0.1.0 (Is it in SAP service market place?)
I also want to upgrade my installation to oracle 11.2.0.2, please let me know where I get the patch set to upgrade from 11.2.0.1.0 to 11.2.0.2,
or
I have to live with 11.2.0.1.0 and apply SAP Bundle Patch ( SBP)

Abu Al MAmun,
I understand from your posts that you recently upgraded to 11.2.0.2.
I am having the same difficulty, of finding the current patch set for 11.2. Could you please let me know how you worked around it?
Thanks,
Siri
Hello Everyone,
I did read the post on to how you have to install the current patch set for 11.2.
But honestly, it pretty much flew over my head.
I am trying to upgrade our SAP AIX 64 bit test system from Oracle 10.2.0.4 to 11.2.0.2.
And so far I have downloaded all the required sw for the upgrade, except for the current patch set 11.2.
This is what I have right now:
1) Oracle 11.2 AIX 64 bit upgrade sw - 51038805_part 1 to 51038805_part 7 and 51039800.
2) Database Patches -->Oracle 11.2.0.2 -->
All they have here is
a. Database RDMBS - SAP_112020_201012_AIX.zip and b. SAP_112020_201101_AIX.zip
b. OPatch - OPatch_11201_Generic_v3.zip and mopatch-2_1_6.zip
c. Database Vault - DV - >Generic - p9656644_112020_Generic.zip
If I am not wrong, the Database RDBMS files are nothing but the SAP Bundle Patches that have to be installed after installing the currrent patch set 11.2.0.2 using MOPatch.
But I did not find the currrent patch set 11.2.0.2.
Could someone please explain the process to me in detail? This being my first time , I am finding it a bit hard to catch up with some of the stuff.
Thank You!
Siri

PDF Printing APEX 3.2.1 (APACHE FOP) which OC4J version for Oracle 11g?

I am using APEX 3.2.1 on Oracle 11.g (under windows XP)
I want to test PDF printing (in advanced turorial) with standard config ( APACHE FOP no Oracle BI publisher).
When I look oracle doc : http://www.oracle.com/technology/products/database/application_express/html/configure_printing.html)
prerequisites for installing WAR file (Installing and Configuring Apache FOP) imply downlad for Oracle Containers for J2EE (10.1.3.2) ,
once there : http://www.oracle.com/technology/software/products/ias/htdocs/utilsoft.html)
the accessed page seems restricted to Oracle Application Server 10g Software Downloads.
My question : is the last Version (10.1.3.5.0 : Oracle Containers for J2EE 10g (OC4J) (build #090727, 91 MB) - J2EE 1.4 compatible with EJB 3.0 / JPA 1.0 support ) also VALID for Oracle 11g ?

I just installed a similar setup with the following software combination and it works.
win32_11gR1_database.zip
oc4j_extended_101350.zip
jdk-1_5_0_22-windows-i586-p.exe

Install the latest patch set for Oracle 10.2.0.4.0

I install SAP PI 7.1 EHP1 on Windows Server 2008 (RC1).
I already installed Oracle DB software 10.2.0.4.0
Now I would like to install the latest set for Oracle 10.2.0.4.0
I downloaded the following files from Service Marketplace:
- p8559467_10204_MS_WINX8664.zip
-p7592030_10204_WIN_GENERIC.zip
- Opatch_10204_Generic_v5.zip
- and 3 Patchset files (Patchset_10204MSWINX8664aa.bin, Patchset_10204MSWINX8664ab.bin, Patchset_10204MSWINX8664ac.bin )
Question:
1) What is the procedure/order to install the patch set?
2) Where (in which directory) should I put the 3 Patchset files and which commando should be used here (opathc apply)?
Thank you!

> - p8559467_10204_MS_WINX8664.zip
> -p7592030_10204_WIN_GENERIC.zip
> - Opatch_10204_Generic_v5.zip
> - and 3 Patchset files (Patchset_10204MSWINX8664aa.bin, Patchset_10204MSWINX8664ab.bin, Patchset_10204MSWINX8664ac.bin )
That one is for updates 10.2.0.<4 to 10.2.0.4. Since you are already on 10.2.0.4 that one is no more necessary.
> 1) What is the procedure/order to install the patch set?
> 2) Where (in which directory) should I put the 3 Patchset files and which commando should be used here (opathc apply)?
See Note 1137346 - Oracle 10.2.0: Patches/patch collections for Oracle 10.2.0.4
Basically you will
- patch Opatch
- unzip the patch to a directory where <sid>adm has access
- stop all Oracle Services
- then execute opatch apply
Markus

Searching for a Reporting Tool for Oracle 11g

Hello,
I have created several OLAP-Cubes with the Analytic Workspace 11.1.0.7.0B on the Oracle Database 11g. Now I need a Tool for Creating some Reporting. I have Oracle BI Spreadsheet Add-In Version 10.1.2.3 for Microsoft Excel. I have installed it and I have a Connection to the Database. But on the Query-Assistent, I can't see my Measures and Dimensions. I guess it is because of the Version.
My Questions are:
- Is there any BI Spreadsheet in Version 11?
- Is there any other Reporting-Possibility with another Tool for Oracle 11g? I couldn't find anything yet.
I am very happy, if there is anyone who can answer my questions.

I have no knowledge of BI publisher but if you install OBIEE then you will have option to install BI publisher also. You can download OBIEE from here.
After installation you can look at following post to see the set up required to access olap cubes.
http://www.oracle.com/technology/obe/olap_biee/index.html
OBIEE install/user documentation -> http://download.oracle.com/docs/cd/E10415_01/doc/nav/portal_1.htm
Thanks,
Brijesh.

Oracle upgrade from 32-bit Oracle 9i to 64-bit Oracle 10g (Windows 2003 R2)

Hello Gurus,
Existing I have SAP R/3 4.7 200 Oracle 9i Windows 2003 32bit
I want to upgrade Hardware to x86 EMT64bit
I would like to upgrade to 64-bit Oracle 10G from 32-bit Oracle 9i. runs on Windows 2003 32bit. Target DB is Oracle 10G on x64 Windows (EMT64 hardware) on Windwos 2003R2 64bit. & Add Solution manager to new System
Please give me any advise which is the better way of upgrading Oracle 10g. Or better yet, please advise a safe way of upgrading to Oracle 10g from 9i
Please guide me about request shipping DVD For This Solution to my site
Many thank in advance
Kuekul

Hi
You can download Oracle 10g from service market place www.service.sap.com>downlaods>Installations and Upgrades-->
Installations and Upgrades - Entry by Application Group>SAP NetWeaver>SAP NetWeaver7.0>Installation and upgrade>windows server-->oracle check for below software and download it
EXE 51031678_1 ORACLE RDBMS 10.2 Windows 1 of 5
RAR 51031678_2 ORACLE RDBMS 10.2 Windows 2 of 5
RAR 51031678_3 ORACLE RDBMS 10.2 Windows 3 of 5
RAR 51031678_4 ORACLE RDBMS 10.2 Windows 4 of 5
RAR 51031678_5 ORACLE RDBMS 10.2 Windows 5 of 5
ZIP 51033272 ORACLE 10.2 Client
ZIP 51036971_2 ORACLE RDBMS Patch 10.2.0.4 Windows Server on IA32 32bit
ZIP 51036971_3 ORACLE RDBMS Patch 10.2.0.4 Windows Server on IA64 64bit
ZIP 51036971_4 ORACLE RDBMS Patch 10.2.0.4 Windows Server on x64 64bit
Regards
Uday

Which release/built of RHEL 5 is stable / recommended for Oracle 11g databa

Hi friends.
My company is in the process of setting up Oracle 11g RAC database. For this, they are planning to have it done on RHEL 5.
Kindly let me know so as to which release/update/version in RHEL 5 should i recommend them. The idea is that, We are looking for a smooth trouble free installation. Tried and tested by others.
Thanks.
Monu

We are going for the 64 Bit, and the installation has been started.
From the very beginning there has been a lot of conflicts with the drivers and patches, initally there was a NIC bonding issue, once that is resolved. now the server gets rebooted each time. Specially when two people try to login at the same time..

Procedure for creating logical standyby database for oracle 11g?

Hi all,
can anybody provide me docs /procedure for creating logical standby databse for oracle 11g standard edition.
Aravind

Aravind,
1. The Oracle Standard Edition does not have standby mechanism, you should do it manually or go for Enterprise Edition.
2. It's rather a question for General Database Discussions instead of Peoplesoft.
Any further question regarding that point, please post out there.
Nicolas.

Please provide the patch set for Oracle Enterprise Manager Grid Control 10

Hi,
please provide the patch set for Oracle Enterprise Manager Grid Control 10.2.0.1 and 10.2.0.5 for AIX 5.3
patch set for Oracle Enterprise Manager Grid Control for 11.2.0.2 OS AIX 5.3
Thanks,
Vishal Hande.

user12009184 wrote:
Hi,
please provide the patch set for Oracle Enterprise Manager Grid Control 10.2.0.1 and 10.2.0.5 for AIX 5.3
patch set for Oracle Enterprise Manager Grid Control for 11.2.0.2 OS AIX 5.3
Thanks,
Vishal Hande.you must obtain all patches directly from
http://support.oracle.com

Env Variable setting for Oracle 11g windows 2003 R2

Similar Messages

Maybe you are looking for