Envelop printing - Photosmart Premium c309g-m

Please help - am using Open Office - have set up DL envelope size - also have set up DL envelope size on the printer. However printer will not print - it feeds an envelope into the printing position and then tells me that it is out of paper.
Before I through it out of the window PLEASE can anyone solve this problem for me??
This question was solved.
View Solution.

Make sure you have set the printer driver (not just the software settings) Size settings to metric and then DL envelope.
See step two in the document below.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01805738&cc=us&dlc=en&lc=en&jumpid=reg_R1002_US...
I was an HP employee
If I have helped you solve your issue please mark this post solved.

Similar Messages

Printing problem with HP Photosmart Premium C309g-m

I'm running windows XP sp3 on all of my machines with this printer{HP Photosmart Premium C309g-m} wireless network.Recently everything starts to print one inch lower on the paper and cuts off the bottom of each document I try to print.I print mostly from microsoft word 2007,and I have checked all the settings in word.It is almost like the printer skips an invisible header then starts to print the document.Any ideas would be appreciated.

I don't think there is anything wrong with the DSL modem HW. There might be an issue with how print data is being routed though.
Please try the second experiment where you blank-out the default gateway and DNS entries from the printer's internal web configuration page. Open the printer's internal web page by browsing to its IP address. Select Networking and then Wireless (802.11). Under the IPv4 Configuration tab, select Manual IP:
For Manual IP Address, use the existing printer IP address.
For Manual Subnet Mask, use 255.255.255.0
For Manual Default Gateway, leave blank. This is important.
Select Manual DNS Server:
Leave both the Manual Preferred DNS Server and Manual Alternate DNS Server fields empty. This is important.
Press Apply.
Turn off the DSL modem, the printer and all computers connected to your network. Wait 60 seconds then turn on the DSL modem and then turn on the printer. Then turn on the computers. See if this corrects the printing speed.
Regards / Jim B / Wireless Enthusiasts
( While I'm an embedded wireless systems engineer at work, on this forum I do not represent my former employer, Hewlett-Packard, or my current employer, Microsoft )
+ Click the White Kudos star on the left as a way to say "thank you" for helpful posts.

HP Photosmart Premium C309g-m unable to print ("check printer documentation")

My printer is: HP Photosmart Premium C309g-m
My computer is: Mac (Mac OS X system)
After removing a jammed paper (probably the incorrect way), I now receive a message to check "printer documentation" and then press "okay". Tried everything I could find, including uninstalling and reinstalling. Still receive same message, and still unable to print.
Can anyone tell me in very simple terms how to fix this?

Hi there chnich,
This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

My HP Photosmart Premium C309g-m printer frequently gives me false "low ink" readings

My HP Photosmart Premium C309g-m printer frequently gives me false "low ink" readings, which wouldn't be a big deal except that unlike other printers I've had, instead of just printing as best it can on low ink, it refuses to print at all.
I know the readings are false:
(a) because I've only recently refilled the ink - (since this started I write down when I refilled the ink and note the number of print jobs, which can be as low as 10 and the false readings can occur) and
(b) my only work around so far is to turn the printer off and on until the false readings stop, it then shows the correct ink levels and does print, but his can often take 5 or 6 times of "off and on." Very annoying.
Questions:
Has anyone else experienced this?
If so, is there a fix?
If no fix, is there a way to change the printer default configuration so it will print anyway -with low ink - instead of simply refusing to print?
Any help is appreciated.
Thank you

Maybe there is some ink on the connections to the cartridges. This document may help with checking those areas after you installed new cartridges last time:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01808074&cc=us&dlc=en&lc=en&product=3793676&tmp...
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

HP Photosmart Premium C309g-m Printer

I have an HP-Photosmart Premium C309g-m printer . I put in new ink will it not print correctly. The color is so light it is impossible to read. Also when I trouble shoot I am told the cartridges ware not aligned.Have tried to align and it wont.
My computer is an HP 64bit,8GB

The steps here should help resolve your issue. If not I would suggest soaking the printhead as described in this post.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

HP Photosmart Premium C309g-m prints wirelessly from Mac & Vaio, but not Dell...

We bought an HP Photosmart Premium C309g-m about a month ago. It will print from my (old) Mac Book Pro and from hubby's new Sony Vaio, via cable, via bluetooth, and via wireless. We want to add a Dell laptop, and have installed the latest printer software from the HP website.
When we go to "add a device" on the Dell, the process goes through "Checking network configuration" and FINDS the printer (we have it set to automatic IP). We select the printer and click Next, the software says installing device and runs netowrk diagnostics without a problem.... and then we get an error at the installing device screen that says "Printer Setup has failed to complete, click Retry to Try again or Next to continue without connecting the printer."
Very frustrated! Any thoughts? Thanks in advance for any help. I thought maybe it was a port issue, but we turned the firewall OFF, and no dice.

You could download and run this very handy utility.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HP Photosmart Premium C309g-m (Fails or SLOW to Print Wirelessly)

My printer has usually worked until recently (past couple months). I have re-installed the driver several times, uninstalled the HP software, re-installed the driver only... and still the same symptoms occur.
OS: Windows 7
WiFi Router: Linksys E4200
Printer: HP Photosmart Premium C309g-m
STEPS TAKEN:
I begin a continuous "ping" of the printer from my PC and my ipad, to ensure I'm not losing network connectivity.
Pings are received on both pc and ipad without issue..
I print a "test page" from the printer properties screen.
Pings are dropped continuously...on both PC and ipad with one or two sporatic ones received with extremely high latency (29165 ms).
Printer sometimes fails to print the document or the document takes 3 or more minutes to print.
I believe it is an issue with the wireless network device on the printer. I was hoping a firmware would fix it. Can you advise me as to what the problem may be, where should I focus my troubleshooting?
I did run a HP Print/Scan Doctor tool, and it did say I had a "port mismatch" and that I needed to reboot my PC. I rebooted my PC, re=ran, and still the same "Port Mismatch" error comes up. So.. that leads me to believe it is an issue w/ my PC...but I can't find any thing that seems to be wrong w/ the port settings. Currently it is set on my printers hostname address, RAW, Port 9100.

Are you installing and reinstalling the printer from the CD? Just to establish a clean baseline lets try a full uninstallation/ reinstallation from the drivers available from the HP website.
First if you use a USB cord, make sure to remove it. Do not plug it back in until the software directs you to. Then go through the Devices and Printers, Programs and Features and Device Manager folders and insure that all copies, files, and programs related to the printer are removed. Then as directed, restart the computer.
In the START menu type "%temp%" and press ENTER. Here I want you to press Ctrl+A and hit DELETE. Some of the files will not allow you to delete them, skip those files and delete the majority that allows it.
Then follow this link to download the full feature software and drivers for the printer (make sure to match your correct OS):
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lc=en&product=3793676&
Install that and let me know the result!
Have a great day!

HP Photosmart premium c309g-m printer prints blank pages even with new cartridge

I have an HP Photosmart premium c309g-m printer and I tried to copy a black and a color document. The printer goes through the motions but the page is blank. I have tried put a new black cartridge in and still prints a blank page.

Thank you everyone who responded. I would like to let you know my printer is now up and working. It was so nice and helpful of you to respond with links and suggestions. I appreciate it.

HP Photosmart Premium C309g-m Wireless Printing Not Working

I have a HP Photosmart Premium C309g-m running as a network printer that is not working on my Windows 8.1 laptop. I have tried uninstalling and reinstalling the all-in-one software, which did not help (and the solution center software had issues, but a test page did successfully print), nor did the HP troubleshooting software.
Whenever I click print nothing seems to happen, I see no document in the spooler. I have also tried selecting the 'printer properties' only to have a pop up say the driver is not installed.
I need help!!!!

Hi ZacharyW, and thanks for getting back to me!
I know you have uninstalled in the past, but I would like to take a bit of a different approach:
First, you'll want to uninstall the current software:
Uninstalling the Printer Software
Then, put your printer into clean boot mode:
How to perform a clean boot in Windows
Once the computer is in clean boot mode, reinstall the software via the HP Printer Install Wizard for Windows.
Good luck and please keep me posted!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

HP Photosmart premium C309g-m not printing AGAIN

HP Photosmart premium C309g-m printer is not printing. I use Vista. This product will print when it wants to. But every time I need to print from Quickbooks for a deadline, it refuses to print anything at all. But if I have no deadlines, no problem! I can print anything from anywhere anytime I want. But the minute I need to send out an invoice from Quickbooks, like today, I'm screwed.
I have:
tried to print. message is Error Printing. No reference number, nada, zippo!
restart printer. reprint document. same as above.
reboot laptop & printer. reprint document. (This usually fixes the problem) but sorry, same as above this time.
tried to refresh printer from control panel. Nada.
tried to restart printer from printer list. Screw you it yells back at me.
I try to use the Tech Help line for HP and they tell me. "We can get it working. But we charge $99." And I say "Screw you, I don't have any money left."
My deadline is in two minutes, and the invoices are not done. I have to go into a 2 hour appointment. But I'll be back. So maybe some kind hearted soul will send a message back on how I can fix this problem. It is frequent and irritating as hell.

is anyone able to help with this WON'T PRINT problem???????

Extremely slow wireless printing with HP Photosmart Premium C309g-m

I'm seeing extremely slow print speeds when printing wirelessly from a Mac or a Windows XP system to a new HP Photosmart Premium C309g-m printer. The printer begins printing immediately when I request a print, but it only prints one line. It will then take about 15 minutes to print the rest of the page, printing each line after a very long pause. Demo page printing doesn't exhibit this problem, only documents from programs like Word 2008, Safari and Firefox (tried firefox on PC and Mac) are affected.
If I connect to the printer through a USB connection it prints fine, so this problem appears to be with wireless printing only.
Printer: HP Photosmart Premium C309g-m
Computer: Mac mini (Late 2009 model) (also tried a Windows XP laptop as a comparison, using latest drivers from HP's website)
OS: Mac OS X 10.6.2 with all available updates installed
Computer connection method: Wired Ethernet connection to wireless router
Printer drivers: version 2.2.1 (Apple supplied, HP drivers never installed as system shipped with 10.6)
Wireless router: Apple TimeCapsule (Early 2009) 1TB, running in a/n and b/g modes on 2.4 and 5GHz. TimeCapsule is in bridging mode as the DSL modem handles DHCP service
Encryption: WPA2 Personal, no MAC filtering or hiding of the SSID.
IP addressing scheme: All addresses are handed out by DHCP server with no reservations of any kind
The TimeCapsule is sitting three inches from the printer and the printer indicates full signal. Connection of the printer to the wireless network and setup of the printer on the Mac went without a hitch. Only when printing a test document did we discover the problem. The wireless network is behaving as expected when accessing the Internet from both Mac and Windows devices (tested with a Dell laptop running XP and a MacBook running OS X 10.6.2), so I don't see any overall problems with the wireless network.
Attempted remedies:
1. Rebooting and powering off, waiting, powering on computer
2. Resetting the print subsystem, turning the printer off and on again and reinstalling the printer
3. Unplugging power from the printer and letting it sit for several minutes before trying to print wirelessly.
None of these worked.
This question was solved.
View Solution.

I don't think there is anything wrong with the DSL modem HW. There might be an issue with how print data is being routed though.
Please try the second experiment where you blank-out the default gateway and DNS entries from the printer's internal web configuration page. Open the printer's internal web page by browsing to its IP address. Select Networking and then Wireless (802.11). Under the IPv4 Configuration tab, select Manual IP:
For Manual IP Address, use the existing printer IP address.
For Manual Subnet Mask, use 255.255.255.0
For Manual Default Gateway, leave blank. This is important.
Select Manual DNS Server:
Leave both the Manual Preferred DNS Server and Manual Alternate DNS Server fields empty. This is important.
Press Apply.
Turn off the DSL modem, the printer and all computers connected to your network. Wait 60 seconds then turn on the DSL modem and then turn on the printer. Then turn on the computers. See if this corrects the printing speed.
Regards / Jim B / Wireless Enthusiasts
( While I'm an embedded wireless systems engineer at work, on this forum I do not represent my former employer, Hewlett-Packard, or my current employer, Microsoft )
+ Click the White Kudos star on the left as a way to say "thank you" for helpful posts.

Printing problem on HP Photosmart Premium C309g-m

Hi all,
I am currently using HP Photosmart Premium C309g-m to print my documents and it runs on five different ink catridges. I usually print text documents using the black ink catridge. I realised that the moment the ink runs low(when they display the ! sign in the yellow triangle), the print out quality is significantly reduced in the sense that my text documents are printed with certain areas being missed out such as having half a line of text not being printed etc when my ink isn't even out or nearing to being completely out.
Does anybody else experience this problem? Is this problem exclusive to this model or just this particular printer I am using? Is there any way I can go about solving this problem because essentially this means that I have to replace the ink catridges once they go low because I can't print a complete document at all! Thanks!

Print a Wireless Network Test.
I hope you are not using this for MAC filtering on your router. It is pretty much a useless security method.
Read more here.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HP Photosmart Premium c309g wireless network printing problem with 64bit Windows 7

A problem exists where the c309g is installed on a wireless network where one of the PCs on the network is running 64bit Windows 7. Amongst other things, the printer may print very slowly, appear disconnected or unavailable through the HP Solutions Centre and may not be pingable from any of the PCs on the network. The problem will affect ALL the PCs on the network !
Network monitoring software will also show an enormous level of network traffic between the printer and the Windows 7 PC. As soon as the Windows 7 PC is switched off, everything returns to normal.
The problem is solved by disabling the HP Network Devices Support Service on the Windows 7 PC as follows;
Run services.msc from the Run command on the Windows 7 PC. This will display the list of all the local services running on the PC together with Description, Status and Startup Type information for each.
Scroll down the list until you see the HP Network Devices Support Service.
Right click on it and select Properties to bring up the Properties window.
Use the dropdown list to Change the Startup Type to Disabled.
Once disabled, the printer will start to work normally. HP are aware of this problem which may be unique to the 64bit version of Windows 7.

Thanks but no luck... I tried it..... Got back from son's baseball game.. checked on printer - as in tried to have printer print something... nothing... prior to going out I went ahead and deleted the 6 c309 print devices and reinstalled a new one and got the printer to work... after the game it was back to ignoring print commands... When I go to printers there again are 6 print devices for this printer - one titled HP Photsmart Premium C309 g-m... then 4 copies of that and then one version titled HP0AC58C (HP Photosmart Premium C309g-m).
As I just finished writting that... the printer came alive and started printing some previous jobs... so maybe it helped - not sure but what about the 6 versions of print devices? I just checked the statuses of all the versions and the default is offline... the various copies have different amounts in que but have a pending status of pending deletion... When I tried to make one of the other copies the default printer - it errors out with 0x00000709

My Photosmart Premium C309g/m is suddenly NOT printing page one of whatever print job is sent to it.

My Photosmart Premium C309g/m is suddenly NOT printing page one of whatever print job is sent to it. How can i fix this?

Please read this post then provide some details. What operating system? How is the printer connected - USB, wired LAN, Wireless LAN, bluetooth?
Is the first page blank of just missing entirely?
What program are you printing from? Does the same thing happen if you print from Notepad or Wordpad? (If not then check the settings in your program to make sure you are sepcifying then entire page range desired for printing).
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

HP Photosmart Premium - C309g and it has stopped printing in black (but will print colour)

Hi my HP Photosmart Premium - C309g and it has stopped printing in black (but will print colour). I've tried:-
printing test page - blank apart from windows logo
powering off and on
printing form different programmes.
Both black printer cartridges are full.
printer is 3 days out of one year guarantee!
I'm not very technical so easy solutions would be preferred.
Thanks
This question was solved.
View Solution.

Try the solution in this thread for cleaning the C309g printhead.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Envelop printing - Photosmart Premium c309g-m

Similar Messages

Maybe you are looking for