Envelope distort to center of the object only possible?

Envelope distort to center of the object only possible?
Okay, can anyone please give me a hint how to achieve the effect shown in the image? If not with Illustrator what software can do this effect?
It's like an envelope distort but like the object (small circles) is not entirely wrapped into the envelope.
I tried moving the corners of the applied envelope towards the center of the object but it resizes the entire shape along with it...

Set up the dot pattern (or whatever the art is)
Choose Object > Envelope Distort > Make with Mesh
Enter 2 rows and 2 columns and click OK
This will add 1 mesh point to the center of the artwork.
Use the Direct Selection Tool (the white arrow) to select only that center mesh point.
Double-click the Scale Tool and enter a value larger than 100% in the Uniform Field.

Similar Messages

Display result on center of the screen. Possible ?

Hello Experts,
I have created some output of string which displays result at runtime.
I want to dispaly this string in the center of the screen.
screen may be changable so my result should be display in center.
Is it possible ?
Please give me some idea.
Thanks in advance.
-rohan

hi,
u can use system variables SY-CUCOL AND SY-CUROW . u can get the system variables in Standard database table SYST.
SY-CUCOL = 35.
SY-CUROW = 35.
WRITE: 'STRING'.
if helpful reward some points.
with regards,
Suresh Aluri

I am getting an warning:0x3ff62006 CanWarnAlreadyOpen;the Object is already open,......

i am using NI-CAN 8461,and get an warning: 0x3ff62006 CanWarnAlreadyOpen;the Object is already open,......
but in my project,i open the object only once,why it show this warning ? what should i do?
thanks!!!

Hi
Check your program that you are closing the can object reference before stopping the program.if not close the canobject reference using close api functions.
Restart and check it .I hope this helps you.If you have question pls post here.

When I use envelope distort, the text warps wrong.

When I use envelope distort on a a chevron shape, the text warps beyond the shape and new anchor points and curves are automatically added. What am I doing wrong? Here are images of what's going wrong: http://imgur.com/a/usHj2

I can't recreate your issue. I'm also not sure what steps you're following, but here's what I did:
I tried it with live type, too, and it still worked. You may try copying your two objects into a brand new document, and see if the issue persists.

After syncing my phone my email shows differently...It showed all of my emails as unread. Now it shows how many emails I have withthe red oval beside the envelope icon rather than just the new ones. How do I get it to go back to only showing new emails?

After syncing my phone my emails all showed up as unread. Even after reading them again! I still get the # of total emails in the red oval beside the envelope app picture. It used to only show the number of NEW emails. How do I get it to go back to that?? HELP!

Is there a setting in about:config that controls the length of the alltabs list? I would look for such a thing, and change the setting if it is there. A setting of -1 should make it limitless.

Is the ability to center an inline object with a baseline shift gone in Pages 5.0?

In the previous versions of pages I was able to center an inline object such as an imported equation with a baseline shift. I cannot find this in pages 5.0.
It is gone?

select line > Format > Style > Stroke > click on the color wheel next to the swatch > select a color
Peter

Using Captivate 8, is it possible to animate the movement of an object from the center of the slide to the top?

I have an object in the center of the slide. As the narration continues, I want the object to move up toward the top of the slide so that I can "fade in" a related (new) object just below it. How can I do that using Captivate 8? I tried using the Effect features and Motion Path, but there are no motion paths going up.

You probably missed that you can edit a motion path (not very easily, has to be done by dragging). This is an old article, but still the same work flow:
Editing Motion Paths and Reusing Customized Effects - Captivate blog
Lilybiri

Why does a standalone program created in Labview 8.5 try connecting to the internet when the program only reads data through the serial port? Firewalls object to progams that contact the internet without permission.

why does a standalone program created in Labview 8.5 try connecting to the internet when the program only reads data through the serial port? Firewalls object to progams that contact the internet without permission.
The created program is not performing a command I have written when it tries to connect to the internet, it must be Labview that is doing it. How do I stop this from happening?
Any help would be very appreciated.

It looks that way..
"When LabVIEW starts it contacts the service
locator to removes all services for itself. This request is triggering
the firewall.This is done in case there were services that were not
unregistered the last time LabVIEW executed- for example from VIs that
didn't clean up after themselves"
This is not yet fixed in LV2009.
Message Edited by Ray.R on 11-04-2009 12:25 PM

How to center a JFrame object on the screen?

Does somebody know how to center a JFrame object on the screen. Please write an example because I'm new with java.
Thank you.

//this will set the size of the frame
frame.setSize(frameWidth,frameHeigth);
//get screen size
Toolkit kit=Toolkit.getDefaultToolkit();
//calculate location for frame
int x=(kit.getScreenSize().width/2)-(frameWidth/2);
int y=(kit.getScreenSize().height/2)-(frameHeigth/2);
//set location of frame at center of screen
frame.setLocation(x,y);

Directly launch the object if only one result is found (SEARCH_AUTONAV )

Hi All
We are on CRM 7.0 EP1, and I read an article in CRMEXPERT that one of the improvements in CRM 7.0 would be to jump to the object directly if only one result is found. For example, if I know the sales order number I can open it directly by putting the SO number in search field 'Sales Order' and instead of giving me the result list, the system will directly open the sales order.
The parameter to used for this is SEARCH_AUTONAV in function profile.But when I test this it is not working.I did not found any documentation about this parameter on help.sap or internet.
Any idea about this parameter and how to use it?
Or is there anyway to achieve what I am looking for?
Thanks in advance for your help
Swapnil

Hello Swapnil,
I'm not sure that SEARCH_AUTONAV is a desired parameter. But there is an improvement request which SAP has introduced by the [Note 1602520 - Improvement requests: Central Edit Button, One hit display|https://service.sap.com/sap/support/notes/1602520].
Also for tehcnical basis please refer to [Note 1548131 - CC1: Automatic navigation to search result (technical basis)|https://service.sap.com/sap/support/notes/1548131].
In general it's all about ONE_HIT_DIRECT_DISPL parameter.

[svn:fx-trunk] 7073: When looking around a tab group to determine which object to focus on, not only should the object be selected, but it should also be enabled and visible.

Revision: 7073
Author:   [email protected]
Date:     2009-05-19 08:27:59 -0700 (Tue, 19 May 2009)
Log Message:
When looking around a tab group to determine which object to focus on, not only should the object be selected, but it should also be enabled and visible.
QA Notes:
Doc Notes:
Bugs: SDK-19717
Reviewers: Alex
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-19717
Modified Paths:
    flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/FocusManager.as

Revision: 7073
Author:   [email protected]
Date:     2009-05-19 08:27:59 -0700 (Tue, 19 May 2009)
Log Message:
When looking around a tab group to determine which object to focus on, not only should the object be selected, but it should also be enabled and visible.
QA Notes:
Doc Notes:
Bugs: SDK-19717
Reviewers: Alex
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-19717
Modified Paths:
    flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/FocusManager.as

API0259: The object cannot be edited in Read-Only mode!

All,
I'm getting the following error when trying to import an MDL file into my repository:
API0259: The object cannot be edited in Read-Only mode!
Does anyone know what this relates to?

Hmmmm, sounds like it is hanging up on a conflict with the configuration name from your source repository and the configuration names in your target. Not sure that I have time to try and replicate that on my own system today.
What I might suggest you try is to, on your source, set the project configuration back to the standard "DEFAULT_CONFIGURATION", get your module configured to use it, and re-export the mapping. Then you can fix your configuration back to where it should be.
Do the same re-configuration on the target prior to import and see if that resolves the problem.
Now, clearly this is not optimal and it would be really nice to find out WHY the conflict is occurring, but it would at least get this mapping imported for now.
Mike
And Vader, it is not that I don't have full faith that Oracle always raises the correct error message for a problem..... but, well, I've USED Oracle for too many years not to consider the possibility.
Case in point in OWB, try putting an invalid value into the OWB-supplied WB_Date_From_Julian function
e.g. select WB_Date_From_Julian(-1) from dual;
10:55:12 Error: ORA-21000: error number argument to raise_application_error of -1854 is out of range
ORA-06512: at "OWB_MGR.WB_DATE_FROM_JULIAN", line 7
because some bright puppy at Oracle decided to try and raise an Oracle Built-in Error via raise_application_error instead of just using "raise", and - of course - the Oracle error code isn't within the allowable range.
Error messages are nice, but you can't always trust 'em - which is why I look to expanded possibilities when neccessary.

My balance sounds horrible when is at the center ... it only happen when I plug my Headphones... if a move the balance to the left/right i have a mono sound in my headphonesleft/right

My balance sounds horrible when is at the center ... it only happen when I plug my Headphones... if I move the balance to the left/right i have a mono sound in my headphones left/right

I too am experiencing this issue after upgrading to Mavericks. Headphone audio balance seems to always stick to the far right. When moved to the center, it still only outputs sound to the right side. I have to constantly adjust the setting a little to the left of center for both sides to output sound equally.

When I try to move an object in Illustrator CS3 only part of it moves, so the object "stretches".

This doesnt always happen, but I cant figure out what I do differently when I am able to move the object successfully. Obviously these are multipart objects. My workaround is to copy the object an paste it...then most times it moves correctly.

mridude wrote:
Yes. I usually select the group of objects with the white arrow by dragging around them. Then change to the black arrow to move them.
Obviously you're not 'capturing' all the anchor points... so, you're getting only part and not the entire object. Use the black arrow to select.... you'll get the whole object... then drag or use the Transform tool to move it.

When printing, my preview is correct, but the printed document shows only the center of the printed document

When printing from my MacBook Air, Pages shows the correct preview, but the printed document is only a column taken out of the center of the printed page. What's going on?

I should add that when I e-mail this document to myself and print it directky from the iMac, it prints fine.

Envelope distort to center of the object only possible?

Similar Messages

Maybe you are looking for